Resume - A diversified and experienced individual seeking opportunity in mechanical engin...

Misco Jobs

Resume #81558

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS

Education:
* 2006-07 University of Phoenix Houston, Texas / Computer Information Systems - Management / Organizational Behavior / Computers & Information Processing / Effective Written Communication 3.92 GPA
* 1986-1991 Community College of the Air Force Hahn AB, Germany-Great Falls, MT / Aerospace Power Plant Technology / Powerplant Technician Certification
* 1986 Odessa High School Odessa, Texas / Accounting I & II / Economics / Honors English

Training:
* 2001 Cummins Supply / Allen Bradley SLC 500 - Odessa, Texas
* 2000 Solar Turbines / Allen Bradley PLC 5/20:5/40 - San Diego, California
* 1990 General Electric / CFM 56-2 Jet Engine Course - Cincinnati, Ohio
* 1989-1991 U.S.A.F. / KC-135(R) Jet Eng. Tech - GE Great Falls, Montana
* 1986-1989 U.S.A.F. / F-16 Jet Eng. Tech.-Pratt & Whitney - Hahn AB, Germany 1/2002

WORK HISTORY

2004 – 2009
WOOD GROUP / ODL Houston, Texas
Technical Consultant
* Mechanical Discipline experienced in Computerized Maintenance Management Systems; CMMS data collection and development; able to read and apply system schematics and (P&ID's); furnish data for equipment status reporting and historical records. Knowledgeable in maintenance and integrity management programmes designed to enhance operational performance during development and operational phases. Work closely with clients to provide safe, cost-effective maintenance strategies aimed at minimizing revenue-reducing operational downtime. Prepare scheduled maintenance tasks based on vendor information and vendor supplied drawings. Develop, review and modify written procedures to suit equipment application. Technical writing skills for Standard Operating Procedures and maintenance guidelines for offshore production operations. Identify areas of concern which reduce production downtime resulting from the failure or degradation of critical equipment and minimize safety/environmental issues. Enter detailed descriptions of the operations and maintenance systems. Determine maintenance requirements and make recommendations to ensure unit reliability. Enter equipment attributes into the database to form a precise description of the operations and maintenance system's operating principal. Develop recommended spare parts lists and identify inventory requirements to meet client's maintenance strategy. Ensure that the highest levels of safety, quality and cost-effective performance are achieved at all times.

WOOD GROUP L.I.T Houston, Texas
Quality Assurance
* Develop written procedures used for component repair process. Outline specifications and tolerances used for turbine overhaul and repair. Track and prioritize work as required to minimize production loss. Perform disposition of Solar industrial turbines, centrifugal compressors, and accessories. Recommend parts needed to complete overhaul. Communicate with vendors to ensure quality and integrity. Initiated process flow to eliminate backlog and speed up production.

WOOD GROUP E & PF Houston, Texas
Technical Specialist
* Mechanical Discipline experienced in Computerized Maintenance Management Systems; entered detailed description of the operations and maintenance systems. Used vendor supplied drawings and manuals to prepare scheduled maintenance tasks based on vendor information. Entered equipment attributes into the database to form a precise description of the operations and maintenance system's operating principal. Develop, review and modify written procedures to suit equipment application. Track and prioritize work, review proper systems applications and procedures. Facilitate Gulf of Mexico maintenance program for British Petroleum Gathered equipment data from maintenance schedulers and management to allow for detailed review of specific equipment to be overhauled (Venice, Cameron and Grand Isle, LA). Recommended need for Predictive Maintenance Program that would dictate maintenance requirements. Challenged the necessity for annual overhauls based on operating conditions resulting in significant savings for the company and their shareholders.

2003 - 2004
BAKER ENERGY Houston, Texas
Technical Specialist
* Mechanical Discipline - Using vendor supplied drawings and manuals, entered detailed information of equipment into database. Worked diligently in handling information needed to prepare scheduled maintenance tasks, meet delivery deadlines and satisfy customer requirements. Develop recommended spare parts lists and identify inventory requirements to meet client's maintenance strategy. Track and prioritize work, review proper systems applications and procedures.

1999 - 2003
HANOVER POWER & TURBINE SERVICES Houston, Texas
Turbine Service Technician
* Service GE and Solar industrial gas turbines. Responsible for obtaining turbine operating data, evaluate and compare data in relation to machine operating history. Perform major inspections for quality assurance to include: borescope, predictive maintenance, vibration analysis. Overhaul and repair of Solar generator/compressor units and GE Frame-3, 5, 6 and Frame 7 generator/compressor units. Experience and use of condition based maintenance analysis tools, equipment integrity analysis tools, predictive analysis tools, performance and efficiency trend analysis tools. Knowledge and ability to analyze equipment failure, pull appropriate data, complete subsequent analysis, and develop corrective action plans. Skilled in spreadsheets, web applications and word processing.
Perform predictive maintenance inspections for clients throughout the U.S. and internationally. Operate computerized analytical program tools (CSI 2120A RBM ware) to provide for specific evaluation of areas of potential concern affecting safe and proper continued operation of machinery. Recommended maintenance planning, major inspection execution, performance monitoring and analysis of gas turbine power plants (Puerta Plata, Dominican Republic). Provide feedback, generate reports, and make recommendations to ensure unit reliability. Perform fabrication, assembly, electrical wiring and packaging of Solar Centaur and Saturn generators. Tasked with commissioning of power plant in Barinas, Venezuela. Assisted with construction of power generation plant which included one Solar Saturn (750KW) and three Solar Centaur (4 MW each) generator sets. Responsible for coordinating part orders, delivery and installation. Install and calibrate Rosemount pressure transmitters, vibration and liquid level switches. Verify communication between package AC panels and PLC controllers. Various offshore duties in the Gulf of Mexico (Venice, Fourchon, New Iberia & Cameron, LA; Port Aransas, TX) and Pacific (Santa Barbara, CA) included troubleshooting, repair, maintenance, installation and alignment of reciprocating compressors and gas turbines. Coordinate and assist in de-commissioning gas turbines and generator sets purchased for refurbishment and resale.

HANOVER ENERGY SERVICES Midland, Texas
Crew Leader
* Tasked with overhaul and repair of skid-mounted engines and compressors; generate part orders; train shop personnel; provide job cost estimates. Inspect compressor cylinders/valves, pistons, and bearing surface areas using special measuring tools. Ability to analyze equipment failure, pull appropriate data, perform failure analysis, and develop corrective action plans. Ensure the unit's prescribed operating tolerances were met. Perform pipefitting, stainless steel tubing, and electrical conduit installation. Start-up and commissioning of various engine driven compressor packages in remote locations throughout Texas; Southeast NM; Bakersfield, CA; (Caterpillar 3516-399, 398, 3306; Waukesha 7042 & 3521; White-Superior 2406 & 8G-825; Ajax DPC-230/280). Install and set-up wireless communications for remote monitoring of company owned field units throughout SE New Mexico and West Texas. Install electrical conduit, steel tubing, pull and terminate wiring; verify communications.

1998 - 1999
B & M OIL TOOL Midland, Texas
Maintenance Manager
* Responsible for part orders/fabrication, schedule work assignments and priorities, recording historical data on all company owned equipment, and inspecting work areas for safety related issues. Duties include installation, maintenance and operation of lathes, drill presses, milling machines, hydraulic actuated pipe racks, forklifts, and inertia welding equipment. Troubleshoot, remove, and install electric motors on industrial saws used for cutting materials. Rework gearboxes and aprons/cross slides on manual lathes. Overhaul CNC lathes: remove/install lead screws, remove/install turrets, remove/install pneumatic spindles. Installation of air supply system throughout facility. Using condensation filtration unit, able to prevent failure of pneumatic controlled air chucks incorporated on CNC lathes. Maintain four shop facility and direct personnel in fabrication of down-hole drilling equipment. Evaluate and recommend personnel for company bonus program. Train employees in the use, service and maintenance of machinery and associated equipment.

1994-1998
UNC INDUSTRIAL POWER Odessa, TX
Turbine Overhaul Technician
* Extensive knowledge in disassembly, inspection, repair and overhaul of Solar Centaur and Saturn gas turbine compressors. Provide disposition of unit condition and recommend/order parts to be replaced/repaired for accurate job cost estimates. Perform inspection on gas producer (compressor), turbine rotors, nozzles, diffusers, accessory gearboxes, and sub-assemblies using special measuring tools to ensure quality control in accordance with ISO 9000 standards. Calculate and measure the flow of turbine nozzles to achieve maximum horsepower and performance. Involved in all phases of installation and packaging of turbine compressor/generator sets. Assembly, paint, packaging, shipping and receiving of compressor/generator packages. Measure, cut and install piping, electrical conduit, wiring, tubing and instrumentation used to monitor turbine operating conditions.

1994
CUTTER BEECHCRAFT AVIATION SERVICES /CONTINENTAL AIRLINES Midland, Texas
Aircraft Mechanic-Ground Handler
* Duties included refueling, inspection, repair, and installation of components used on King Air, Beechcraft, Piper, and Cessna aircraft. Maintained fuel service trucks, monitored and recorded fuel inventory levels. Performed ground handling, launch/recovery, and towing of aircraft. Team member of single point refueling; supervised refueling/defueling and fuel panel operator. Tow team supervisor; operate tow vehicle; aircraft parking; quick turn inspection; service main/nose gear struts and tires.

1991-1994
DESIGN ENGINEERING Odessa, Texas
Machinist Apprentice
* Compressor Mechanic Set-up and operation of portable field machining equipment. Repair, maintain, and operate manual lathes, drill press, milling machines, and welding equipment. Traveled to production sites and performed wire line inspections, metal locking, and honing on various compressor frames. Disassemble, machine, and inspect engines, compressor frames, cylinders, and crankshaft bearing surfaces using special cutting/measuring tools to ensure OEM prescribed tolerances were met. Polish and inspect crankshafts for deterioration/wear.

1986-1991
U.S. AIR FORCE 50th Tactical Fighter Wing Hahn AB, Germany / 301st Air Refueling Wing Malmstrom AFB Great Falls, MT
Jet Engine Technician Sgt (E-4)
* Responsibilities included troubleshooting aircraft engine systems, borescope, generating engine maintenance reports, part orders, training personnel, and flight-line engine operation. Plan and schedule work assignments. Evaluate and recommended personnel for training; prepared job proficiency guides; counseled trainees on training progress. Experienced in engine run, performance monitoring and diagnostics center. Perform installation of test equipment for engine diagnostic testing at the test cell/hush house. Using the Automated Ground Engine Test System (AGETS), calibrate and trim the Electronic Engine Controller (EEC) and Unified Fuel Controller (UFC); two vital components on the General Dynamics F-16 Falcon.
Knowledgeable in performing systems operations: electrical, oil, fuel, engine start, integrated driving generator, and engine control systems. Crew Chief qualified and engine run certified on the KC-135(R) tanker. Perform maintenance and engine operation on the GE CFM-56 turbo-fan aircraft engine. Able to perform removal/installation and inspection/repair involving fans and boosters: No.1 & 2 bearing supports, HPT nozzle/rotor, LPT nozzle/turbine/shaft, transfer gearbox and accessory gearbox. Service hydraulic systems, liquid and gaseous oxygen systems, perform aircraft ground handling (towing), fuel servicing/transfer, preflight and post-flight inspections; Auxiliary Power Unit (APU) troubleshooting, removal and installation

Achievements & Awards:
* Initiated Predictive Maintenance/Vibration Program for Dynegy/Midstream Refinery-Venice, LA. Ensured unit reliability, increased production, cut repair costs and helped customer prevent significant losses due to unit outages – 2003
* Tasked with commissioning project in Venezuela which consisted of the refurbishment /construction of a Solar Centaur Generator Package for Power Generation Plant in South America. Trained personnel on proper installation of components and saved the company additional money by reducing sub-contract work – 2002
* Responsible for eliminating outdated air supply system due to severe work hazard: ordered necessary materials; installed air supply lines throughout a four-shop facility. This directly affected productivity, increased reliability, and assured worker's safety – 1998
* Wrote a procedures manual outlining disassembly and inspection of Solar Saturn turbine compressors. Enabling technicians to disassemble and correctly identify status of each component allowed for the proper part orders/repair or scrapping of parts making the overhaul process more efficient – 1995
* Master Technician Award-USAF – 1990
* Engine Run Certification KC 135(R) Aircraft-USAF – 1990
* Honor Graduate; Professional Military Education-USAF – 1989
* Promoted to Senior Airman Below the Zone. Earned the rank of Sergeant 6 months in advance for displaying technical knowledge, professional skill and initiative in the performance of my duties - 1989
* The Air Force Achievement Medal -USAF; directly contributed to the 98 percent engine acceptance rate by 50th Component Repair Squadron Test Cell/Hush House. - 1989
* Helped 50th Tactical Fighter Wing earn USAF Daedalian Award – 1987
* Dept. of Defense Phoenix Award, 50th Component Repair Squadron - 1986 and 1987
* United States Air Forces in Europe Maintenance Effectiveness Award – 1988
* Earned the 50th Component Repair Squadron Airman of the Month Award - 1987

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1401 to 1450 of 15473)

Go to Search Parameters...

Brief Description

Analyze requests for contracts initiation and develop contracts packages, set and recommend qualification / evaluation criteria and negotiation strategies and attend the same, coordinate and advise users Divisions on contractual and commercial matters.

I am currently working as Principle Process Specialist for Worley Parsons MEG, Calgary. I have more than twenty-four (24) years of experience in process design, conceptual studies and operations, for oil and gas projects (both onshore and offshore), petroleum refineries and petrochemical complexes.

I have over 20 years of hands-on experience in the information technology industry with the last 5 years spent managing a staff of 50+ Project Managers, programmers, analysts, Oracle DBAs with an annual budget of over $10 million.

Land Manager / Land Administrator

B.Eng, Traffic and Transportation Planning and engineering, local area traffic management, transportation modelling, sidra, transyt, trips, bus transit, light rail route and station planning

Environmental Microbiologist Phycologist

Chemical Engineer with 16 years petrochemical and commissioninig experience

Maintenance & Operations, Commissioning & Testing of Power Plant H.F.O and Gas Based ,Mining equipment, CAT Equipment / Resource Management

I have a PhD in Rock Mechanics and Rock Engineering and have practical experiences in both mining and civil engineering. I am very competent in numerical methods in geomechanics.

CSWIP Senior Welding Inspector BG Grade 2 Painting Inspector NDT ASNT Level 2

Using Eclipse Simulator for history match and prediction of oil and gas reservoirs.

Reservoir Engineer,18 years of experience from Condensate to Heavy oil fields, over 4300 hours of intensive petroleum training. Extensive experience as Integrated Team Leader. Extensive experience with Single and Multilateral Horizontal wells in Heavy Oil field. Simulation, planning experience.

Having more than 14 years experience in Welding Inspections, , construction, fabrication, installation, commissioning in QA/QC Multidiscipline field as TPI or clients representative of Major Projects in the heavy construction industry including, onshore & offshore. Petrochemicals Facilities, Fertili

Tertiary Qualification in HSE disciplines,15 years Oil & Gas and Mining Industry and Exploration experience at senior,Supervision of safety functions in an operational environment. Implementation and on going development of the Site Health and Safety Management Plan..

11 yrs Experience in Construction - Inspection Fields

23 years oil and gas experience. 10 years experiecne as HSE Advisor / RSTC

I am interested in working for the company as Maintenance Superintendent/Manager.

Traffic Engineer with Master of Technology degree in Transportation Engineering. I have about 11 years of technical and project management experience in UAE, Qatar, India, Sudan and Saudi Arabia, in the area of traffic and transportation engineering/planning;

Production Supervisor

Seeking to find a challenging position in the oil and gas industry as a Gas Plant Operator within a company that offers me the possibility to use my experience to best serve the needs of the company, improve its bottom line profitability and efficiency. Over 22 Years of Experience

Advanced Certified Interconnect Designer. Trade Radio Technician. Diploma Electronics Eng. CID & CID+ Training. 17 years experience in both Comercial and Defence (Aus) Specialising In High Speed Digital, RF, Analogue and Video Board Design using Altium Software.

Electrician

25 years expereinced project manager / construction manager, project cost control, pipeline and facilities, expereinced in pipeline inspection, facility inspection, non destructive techniques, ASME and CSA. Expereinced in Gas and Oil, responsibility groups of 70 or more inspectors / construction

diploma in chemical technology

I am diploma in Chemical Engineering. I have more than 25 years of experience as a process field and panel operator.

Fitter and a Maintenance Supervisor.

Piping design and gernal 3D model design using AutoCAD and CADWorx. Conduct reviews for Design Engineers and Field Engineers with Navis software. Direct drafters in preparation of drawings and plans. Coordinate drawings with other design agencies, fabrication and construction.

I am a Kentucky certified miner, mine foreman, electrician and electrical instructor.

Currently I am Mechanical Technician in the oilfields in Sudan also have many years of experience as maintenance supervisor.

Electroplating and running chemical an run test on them and check qc on parts

PDMS Structural Designer Offshore Experience

CFS-CV

NDT level III, Senior certified welding inspector, experienced in most industries

I am a traveling supt. looking for someone to utilize my skills. I am an excellent problem solver and work well under pressure.

I worked in Aker Shipyards Braila in Hull Design Department as ship designer. I was involved in several projects on making of hull structure drawings, workshop drawings, lines faring for different types of maritime vessels built in shipyards: cargo vessels, supply vessels, RO-RO, container vessels,

Free! 20 years experience in Control Systems design and drafting. Industries include: Refining, Petrochemicals, Pharmaceuticals, and Brewery. Working knowledge of AutoCad MicroStation, Microsoft Excel & Access, PDS modeling, SmartPlant P&ID, SmartPlant Instrumentation (INtools) and SmartPlant 3D.

Hungarian chief rig mechanic with 30 years experience

Dynamic, energetic, results oriented, Geologist/Technologist with extensive supervisory and field experience seeks a technical/management position in a progressive thinking mineral resources organization.

My career objective is to become an integral part of a team involved in oil and gas exploration where I can use my problem solving skills and creative abilities to meet challenges and contribute to a dynamic organization.

Results oriented engineering professional with 20 years experience in project management, process engineering, and facility engineering

Experienced Materials coordinator

HSE manager . qualfication . diploma of HSE engineer , osha qualified

A diversified and experienced individual seeking opportunity in mechanical engineering / management support or related field.

Planning of all the activities of Major and Minor inspection of conventional steam turbine of various capacities from shut down to start up and over speed testing.

development of process flow diagram (PFD) and P&IDs, equipment sizing & preparation of datasheet, heat and material balance, simulation on HYSYS, process improvement, Hazop Reviews, line hydraulics, debottleknecking to improve plant performance, commissioning and pre-commissioning activities.

Honest, hard working, tenacious employee

Experienced Manager, and an effective leader with excellent interpersonal skills and flair for creativity, with the ability to work to strict deadlines. Adaptable, good sense of humour that enjoys a challenge and enhancing peoples potential using communication skills at all levels.

Fabrication , construction , in-service inspection , repair, alteration and rating activities for pressure vessels , pressure relieving devices , steel storage tanks built to API 510, ASME section VIII div 1,

Over 13 yrs exp in OD/HR/OB engagements, executive coaching/mentoring, leadership development. currently working as Principal consultant with Infosys leadership system, Infosys tech ltd (Nasdaq:INFY).

B.E.-Chemical with 9 years of Commissioning and Operation Experience in Ammonia Plants; 6 years of Project Management experience & 4 years of Process Engineering experience in Fertiliser Project

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 [ 29 ] 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out