Resume - Senior PDMS Piping Designer/Checker

Misco Jobs

Resume #81708

CONTACT INFORMATION:
View contact information...

SENIOR PIPING DESIGNER/CHECKER

EDUCATION:
Coffeyville Community College - Coffeyville, Kansas. (AA Degree)

SOFTWARE I AM SKILLED AT USING:
PDMS (3D) Electronic Modeling System.
PDMS 2D Draft.
PASCE Plantview (3D) Electronic Modeling System.
Intergraph Smart Plant Review.
PDS (3D) Electronic Modeling System.
Quanta Point Survey software.
AutoCAD and Microstation.

PROFESSIONAL POSITIONS I AM QUALIFIED FOR:
Senior Level Piping Designer.
Senior Level Piping Checker, PDS or PDMS.
Senior Level Piping Lead.

Senior Level Equipment and Piping layout for Refineries, Power Plants, Chemical Plants, Production Platforms, Wellhead Protector Platforms, Floating Production Storage Offloading Ships, Manned Tension Leg Platform Hulls, Manned Spar Platform Hulls and SCR (Steel Cantenary Riser) Pipelines.

Senior Level Piping Detail and Checking for Refineries, Power Plants, Chemical Plants, Production Platforms, Wellhead Protector Platforms, Floating Production Storage Offloading Ships, Manned Tension Leg Platform Hulls, Manned Spar Platform Hulls and SCR (Steel Cantenary Riser) Pipelines.

Senior Level Skid layout, Piping Layout, Skid Piping Detail Design and Checking.

Senior Level Mechanical and Vessel Designer.

WORK EXPERIENCE:
November 2008 to Present
Worley Parsons (Topsides) (Position: Principal Project Designer)
Exxon/Mobil Jade Platform rework.
Piping Layout and Detail Design of entire Jade Platform Revamp.
(PDMS version 11.6.SP4.12 used on the project)
(Quanta Point Survey software used on the project)

January 2008 to November 2008
Foster Wheeler USA Corp. (Position: Piping Lead, Piping Checker Lead)
North Coker Unit Piping Lead on the BP Whiting OCC Refinery project. Duties include supervision, refinery layout, piping layout, nozzle orientations, job planning and scheduling.
Overseeing all checked documents which include nozzle orientations, equipment location drawings, key plot plans, piping plans and piping isos using Smart Plant Review version 6.2 and PDS models as tools.

March 2006 to January 2008
WorleyParsons Sea (Position: Principal Project Designer)
Manned Spar Platform Hull Equipment Layout, Piping Layout, Detail Design for ATP Mirage Field, (MinDoc 3), Supervision of our work done in our India office. (PDMS Version 11.5 and 11.6 used on the project)
Manned Tension Leg Platform Hull Equipment Layout, Piping Layout, SCR layout and Detail Design for Shenzi-BHP Tension Leg Platform. (PDMS Version 11.5 used on the project)

March 2005 to March 2006
CDI Engineering Solutions (Position: Piping Lead )
Planning, Supervision, Plant Layout, Piping Layout Front End Loading and Piping Detail for the Dupont Pontchartrain Plant Enhancement Project. (PDMS NT Version 11.3 and 11.5 used for Plant and Piping Layout)

March 2004 to March 2005
Dow E & CS Center (Position: Senior PASCE Piping Designer/Checker)
LHC7 Power Plant - Power plant turbine layout, piping layout and checking.

March 2003 to March 2004
Aker Kvaerner (Position: Senior PDMS Piping Designer/Checker)
Finishing building area, pellet blending area, warehouse packaging / load out area equipment layout, piping layout and airveying piping layout on the Q Chem II feed project. (PDMS NT Version 11.6) (Advanced Level PDMS Design Experience) (AutoCAD 2002 used on the project for general arrangements) Orthogen used on the project to extract drawings from the model. (Microstation used on the project)

March 2002 to March 2003
Technip Upstream (Position: Senior PDMS Piping Designer/Checker)
Production offshore platform, Wellhead offshore platform piping layout and checking on the BHP Angostura field platforms. PDMS 2D DRAFT used to extract and develop equipment arrangement drawings, piping plans, piping sections, and material handling drawings. ADP (automatic drawing Production) used to extract pipe support drawings from the model. (PDMS NT Version 11.3) (Advanced Level PDMS Design Experience)

April 2001 to March 2002
Aker Kvaerner (Position: Senior PDMS Piping Designer/Checker)
Offshore platform equipment layout, piping layout and checking on the Cabinda Gulf Oil processing / compression platform. (PDMS NT Version 11.3) (Advanced Level PDMS Design Experience) Orthogen used on the project to extract drawings from the model. (Micorostation used on the project)

March 2000 to April 2001
ABB Lummus (Position: Senior PDMS Piping Designer/Checker)
Refinery equipment layout, piping layout and checking on the Ryazan Refinery modernization project. Cold weather design experience. (PDMS NT Version 11.2) (Advanced Level PDMS Design Experience) PDMS 2D DRAFT used to extract piping plans and sections from the model. ADP (automatic drawing production) used on the project.

May 1998 to March 2000
Brown & Root Energy Services ( Position: Senior PDMS Piping Designer/Checker)
Exxon / Mobil Development Co. - Floating production storage offloading (FPSO) rig equipment and piping layout on the Erhap Nigerian project. (PDMS NT Version 11.2) (Advanced Level PDMS Design Experience)

Pemex (Cantarell Field) - New technology offshore process platform equipment layout, piping layout and checking. (PDMS Version 10.5 and NT Version 11.2) (Advanced Level PDMS Design Experience)

Algeria Gas Production Project – Gas Production Piping Layout and Detail Design.
(PDS 3D Electronic Modeling System used on the project)

May 1997 to May 1998
Dow E & CS Center (Position: Senior PASCE Piping Designer/Checker)
BSL Plastics plant - Plastics plant equipment layout, piping layout and checking.

January 1994 to May 1997
M.W. Kellogg (Position: Senior Piping Designer/Checker)
Philips Plastics Plant (Pasadena) - Plastics plant equipment layout, piping layout, airveying piping layout and checking.
CFI Industries - Ammonia plant equipment layout, piping layout and checking.
Terra Fertilizer Plant Rebuild Project - Ammonia plant, urea plant and nitric acid plant equipment layout, piping layout and checking. Cold weather design experience.

October 1992 to January 1994
OPC Engineering Inc. (Position: Chief Draftsman)
Elf Petroland K5 North Sea offshore platform, Elf Nikosa floating production storage offloading (FPSO) rig and Arco South China Sea platform - Drizo dehydration skid packaging equipment layout, piping layout, vessel design, and checking. (AutoCAD used on all projects)

Note: (1) Specific work experience prior to 1992 furnished upon request.
(2) References furnished upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 15477)

Go to Search Parameters...

Brief Description

Extensive Cost Control experience gained over the last 25 years in the Oil Industry mainly in Drilling

Master Mariner

i attended petroleum institute nigeria after my school certificate i had ond in petroleum refining technology and higher diploma in chemical technology i worked in nnpc refineries in porthacourt warri and kaduna i can also work in petrocheical and gas processing plants

Special Inspector CWI/ICC, Bolting, Fireproofing, B1 Inspector

Civil Structural designer with over 20 years of experience in civil, structural, industrial, petrochemical onshore and offshore projects, infrastructure, and government projects.

Capable of handling high-pressure situations at the same time maintaining standards of accuracy. Influencing people in a friendly but firm manner.

Experience in foxboro and bailey DCS panel operation . i am working as panel operator in a big oilfield control room since 1993, i am the most suitable candidate for this post

Construction and Maintenance Mechanical Manager / Superintendent / Supervisor

Civil structural engineer, 14 years experience, familiarity with structural codes and finite elments software.

Construction HSE proffessional residing in Canada. I am looking for over seas employment on a major Construction project. I am a board certified health and safety consultant and Safety officer as well as having over 15 yrs of construction expeirence as a journeyman tradesman.

Well Services, Well Interventions, Completions

I am a highly competent person, trained and experienced in all facets of construction, construction management and leadership.

PhD in Geophysics, excellant in computer ,

Detail engineering as Performer/Area Lead; Material estimation, Proposal & Man hour estimation; Bid review, Vendor/Sub-contractor document review; Development of standards, spread sheets; Coordination with work share office/Client; Field engineering Support at site

A seasoned Security Manager with 20+ years of experience in Government service and Oil and Gas industry 15 of which was in Shell Nigeria. Strong field experience in Security Operations, kidnap & ransome mgt, risk surveys and assessment, cost control, loss prevention and incident investigation.

Goal-oriented QHSE manager with 18 years experience in organizational and project QHSE Management, In-house project Management and Audit Management including 10 years background of Piping and Pipeline Engineering in various industries under E, EP, EPCM or EPCC contracts.

Metallurgist with more than 15 years of experience.

MASTER OF APPLIED SCIENCE IN MINERAL PROCESSING, 15YEARS EXPIRIENCE

Strong leadership and ability to work according by Company's Political and Procedures. Good understanding of Oil accounting Process. Supporting the branch Finance Manager on day-to-day compliance issues

I am a Chemistry graduate with 18 years of experience with NACE certificate as Corrosion Technologist

Preliminary 35 hours PDU trained PMP with MBA in Telecom Management plus Bachelor in Engineering (Electronics & Telecommunication), A well established professional in the information technology sector with 10 years of project Program, delivery management expertise combined with multiple tasking, and

Over seventeen years of experience in the Oil & Gas Construction

18 years Project Construction Management/ Project Execution / Project Management Consultancy experience in the Industries like Refineries, Petrochemical and Oil Gas (Cross Country Pipelines, Booster Pump Stations, Gas, Oil Station, Up-Stream flow Lines) including Mechanical / Piping, Civil, Electric

Senior Piping Engineer - Stress Analysis / Material / Layout (18 years experience)

General Management (1300 staff), Sales devt, finance - International experience - Oil & gas, Distribution, civil eng.

Status Qualifications and employment history Education Foreign Languages

Being graduated in chemistry,I gained 17 yrs of exp in areas of operation,R&D.Process(control,validation),QC,material characterization, by using chemical& instrumental methods in cement ,Ores ,minerals,Ceramics &Refrac,Metals indls ,wishing to work with a team where I can utilize my full knowledge

Working in Oman as a Instrument Engineer, I have 20 years exp in Instrumentaion and Analytical

Master mariner class 1 unltd, over 8 years command experince onboard large crude carriers. Over 40 spm mooring ops at various terminals including Lybia. Willing to gain expertise as mooring master in offshore oil industry.

I have high experience as production supervision at manufacture plants.

25 years experience in construction management of mining operations, highways, dams, site preparations, environmental, airports and petrol – chemical projects. Management assignments in 12 major projects.

Drilling Fluids Engineer, Experience with All types. Over 30 years in field. World wide experience, Presently working Ultra-Deepwater projects in GOM.

post Engineer Senior Inspector – Painting / Coating & Insulation BGas / NACE –CSI [I] certified Painting Inspector. Experienced Thermal / Cryogenic Insulation Inspector Ref – Contract / Direct Hire- on Day rate basis with rotational cycle. Oil & Gas, LNG projects. Client side representati

SENIOR PANEL OPERATOR POSITION FOR PRODUCT TANK / JETTY AREA.

Sr. Electrical Designer with 15 yrs experiance including PDMS

Experienced structural engineer (US and Australian experience)

Mechanical Enginner with more than 16 years of experience in the field of Construction, Maintenance of Petrochemical, Chemical and Power plant

15 year experience in international/ multicultural mid- and large scale oil & gas projects in polar areas of Russian Federation in both Contractor’s and Client’s role. Working to Russian and Western standards. Planning, risk management, cost control, certification for construction and commissioning.

Fourteen years of experience preparing land-use, environmental, and regulatory agency applications for mine sites. Ten years of experience leading interdisciplinary project teams and has successfully negotiated land-use, wetland, endangered species, air, storm water and reclamation permits.

My strengths lie im my ability to manage available resources and communicate with others

Expert in PDS Fameworks, Microstation, PDMS and bentley Structural Triforma

Civil/Structural engineer with 14 years experience in oil 7 gas industry

Work effectively as a leader/supervisor with peers and Teams

Well Test Engineer

Senior PDMS Piping Designer/Checker

With my dedicated experience as a Directional Drilling Supervisor for 14 years.I have worked in Western Canada, Mexico and Middle East.

Years of progressive and increasingly responsible executive assistant & office management

Electrical engineer with experience in oil and gas maintenance, installation, procurement, materials sales and marketing

Experience in 8 years in Mechanical seal industry, 7 years in Diesel engines and 1 year in fabrication industry

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out