Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #81731 next resume »»
CONTACT INFORMATION:
View contact information...

Objective
Looking for a position of Production Supervisor/control room operator.

Experience June 2008 ¡VTill date Saudi Aramco Deharan, KSA.
Operations Specialist
Working with Continuous Crude Distillation Unit having Atmospheric Column, Intermediate Column, and Vacuum distillation column. Responsible for training of locals also.
May 2006 ¡V March 2008 Tasnee Petrochemical Co.Jubail KSA.
. Operator ( Control Room)

Working with High Density Polyethylene Plant, Hostelene Process, having slurry Reactor, Decantor, Purification, Hexane and butane Purification. Presently involved in Documentation Preparation and Preparing commissioning, start up activity procedure. Actively involved in preparing documentation as SOP's emergency procedures, Hazop study, and training material for operators.
Aug. 2004-May 2006. ORYX ¡V GTL, DOHA, QATAR
. Senior Operator.
Working with Refinery Section, having Hydro cracker, Naphtha Stabilizer, Diesel Stripper, Fractionators, Turbine driven compressor, Hydrogen production unit Reformer, LPG Cleaning Unit. etc.
Undergone training with SASOL in South Africa for a month, Prepared manuals and procedures for commissioning and start up.. Fully conversant with the quality (ISO) and Process Safety Management concepts.
Worked closely with Company operations, maintenance and HSE staff to ensure safely and environmentally responsible operations at all time.

Duty involves operating, monitor and control assigned work area through DCS/ICS stations safely and efficiently to achieve target plant yield without any hydrocarbon loss and within emission limits and ensure effective handovers on shift changes.
To control and contain plant upsets and prevents minor emergencies escalating, maintaining clear communication and co-ordination with other sections of the plants, and neighboring plants.
To ensure and concise communication between Field Operations Supervisors and other sections
To provide reliable and accurate information on plant condition and status to the shift controller, shift supervisor, for planning product movement, maintenance activities, and daily management reports.
To communicate and coordinate with other upstream and down stream partners, other departments, and shift personnel to operate the plant smoothly and swiftly identify abnormality.
.
July 2000 ¡VJuly 2004 ABU-DHABI POLYMERS CO. ABUDHABI,UAE
BOROUGE (PE-DIVISION)..
Senior Board Operator.
„X Working in Polyethyethylene Plant (Borostar Technology) capacity-250000 Tons /year. Working in units- Cat. Feeding System, PrePoly Reactor, Loop Reactor, Gas Phase Reactor, and Pelliting etc. Working in Pre-commissioning, Commissioning, Start ¡VUp activities, and TDC-3000 control panel (Gus).
„X Job includes ensuring integrity and functional tests change over routines and other scheduled verification tasks are completed efficiently and maintain the appropriate documents & records.. To control and contain plant upsets and prevents minor emergencies escalating, maintaining clear communication and co-ordination with other sections of the plants, and neighboring plants
„X Good knowledge of computerized system for logging and data collections.
„X Handling materials such as Ethylene, Butene, Propane, Teal, and Zigglar Nata Catalyst. Very well conversant with the computer skills such as Microsoft Word, Excel.
„X Undergone the training for PME030 ¡VTPS system GUS Operator Course.
„X Training for MANAGEMENT, LEADERSHIP & EMOTIOINAL INTELLIGENT AND SAFETY AND LOSS PERVENTION by MEIRC Training and Consulting.

April 1997 ¡VSept. 2000 EQUATE PETROCHEMICAL CO. AHMADI,
KUWAIT.
Operator Process.
„X Worked in Polyethylene Plant (Unipol Technology) having capacity 200000 Tons / year, experience of Raw material Purification Unit, having Deoxo vessel,Dryers,Degassing columns for removing Oxygen,co,co2 and moisture from Nitrogen, Ethylene,Butene,Hexene,Hexane. Butene Dimerisation, Resin Handling since PreCommissioning, Commissioning and Start Up, worked on TDC ¡V3000 Panel and handled materials ¡V Teal Deac, TnHal, Hexane, Hexene etc.
„X Trained a batch of 20 operators successfully including all nationalities.
„X Undergone the trainings of Beginning Word 97 and PME005 ¡VUniversal StationX Operator Course.

FEB.1995 ¡VOct. 1996 OCCIDENTAL OF OMAN OMAN
Gas Plant Operator.
„X Worked with an Oil Field Occidental Of Oman (ESI) Safah, in N.G.L. Recovery having units Separator, Compressor (Superior Engine Reciprocating), Chilling System, De-Methanizer, De- Ethanizer, Propanizer, Stabilizer Column, and Diesel Topping Plant, GLYCOL DEHYDRATION.
March1992 ¡V Jan. 1995 DEEPAK FERTILIZER & TALOJA, INDIA.
PETROCHEMICALS.
Senior Plant Operator.
„X Worked in Methanol Plant, having units- Reformer, Saturator, Distillation Columns, Converter, Compressor (Centrifugal Steam Turbine driven), and Waste Heat Boiler. Experience of TDC ¡V3000, Start ¡VUp & Shut downs.

March1989 ¡VMarch1991 YANBU PETROCHEMICAL CO.
. YANBU, KSA
Cat. Plant Operator.
* Worked in Polyethylene Plant (Unipol Technology), especially got exposure on Catalyst (M, S&F) manufacturing, having units-Silica dehydration,TOB Preparation, Precursor Preparation, Reduction Step, as well as TDC2000 Panel. Participation in Rescue and Fire ¡V Fighting drills.
May, 1987- Oct 1987. BOMBAYDYING & MFG. CO. PATALGANGA
INDIA.
Process- Forman.
* Worked in Di-Methyl Therphtalate Plant containing units- Oxiders, Purification, Vacuum Distillation, Crystalizer, and Flackers etc.
Sept 1984 ¡VOct.1985 AL- JUBAIL PETROCHEMICAL CO.
JUBAIL, SAUDIA ¡V ARABIA..
Process ¡V Operator.
* Worked in Polyethylene Plant making LLDP& HDP using Unipol technology, Experience of Cat. Manufacturing Unit-Silica dehydration, TOB Preparation, Precursor Preparation, Reduction Step, as well as TDC2000 Panel. Independently handled the unit.
Feb1983 ¡V Feb1984 NORTH GAS PROJECT, KIRKUK, IRAQ.
Process- Technician.
* Worked in Gas Plant having Distillation Columns (De-Methanizer, De-Butainizer) Pumps, Centrifugal Compressors, Turbines, etc.
Sept1975 ¡VFeb.1983 UNION CARBIDE INDIA LTD. BHOPAL,
INDIA.
Senior Plant Operator.
* Worked in Commissioning and Start-Ups of Sevin & MIC Plants. Having Carbomylation Reactor, Evaporator, Solvent Recovery, and Dryers etc.

Education 1981-1984 Bachelor Degree Of Science Bhopal University
With Chemistry subject. Bhopal, INDIA.
1974. Higher Secondary School Certificate from M.P. Board of Education, Bhopal, India.

„X Under Gone the Basic Training of Union Carbide and Equate- Basic Training, Team Concept, TDC-3000 by Honeywell and Window-95 BeginingTraining, PME030-TPS SYSTEM GUS OPERATOR COURSE.
„X First Aid Training from Abu Dhabi.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1701 to 1750 of 15508)Go to Search Parameters...
Brief Description
Climb and rescue certified Class II OSHA 30 hour construction C-Stop 10hr BOP-ARSC-OSHA-10hr. first aid certified CPR/AED adult certified Safety Inspections Quality Control NCCCO certification number: 070431577 Mobile Crane Operator Proficient on a computer (MS Word, Excel power point)
Joined E & P Company in 1989 and have worked in both onshore and offshore at different positions. As co man supervise operations on Desert Rig deployed for drilling and work over wells. Prior to current assignment worked as co man on jackup rig. Ensure operations are carried out safely & efficiently
My various experience in the Safety field has included so far about three years in KCA DEUTAG Drilling GmbH Company drilling company as Rig-site HSE Advisor in Libya,four years position as HSE Coordinator at Drilling Waste Management Company(Tunisian company),Prior to that I was a Chief of District
Having substantial knowledge and experience (14 years) in Piping/Mechanical engineering, especially in the Piping Engineering and Design. Involved in industrial plant, petrochemical. Expert in PDMS, including Design, Draft, Isodraft and ability to design and drafting Pipe support using MDS
Senior Welding Inspector QA/QC
Total experience of 20 years of which 2 years in Overseas as a Process /DCS Plant Operator In various Gas, Refinery, Petrochemicals & Fertilizers Plants.
27 years experience as Drilling supervisor.
Under Ground Piping Specialist
Engaged for more than 14 yrs in extensive work in the field of piping, structural and welding inspection, supervision of piping, erection, material preparation and scheduling based on the given scope of work.
I am a serious minded individual seeking a new environment that has a challenging and rewarding future. I can offer you 29 years of experience in the mining industry (phosphate/open pit). I have obtained my experience from working the ground level up to management.
Millwright welding tickets
Accomplished petroleum exploration and production manager of people and projects. Proven broad-based experience in multi-disciplinary exploitation of petroleum reserves, evaluation work in acquisition and divestitures, information technology and project management.
Twenty-Four years experience in the administration of Oil & Gas property documentation inclusive with, land management, mineral leasing, landman duties encompassing lease conversions, reimbursements, compensations, and shut-in royalties. Serving as a generalist for my first ten years and as a speci
Over 13 years experience in positions including Project Engineer, Quality Control Engineer, Civil Engineer, Project Planner and Scheduler, Estimator, Crane Lift Supervisor, Welding Inspector, Land Surveyor and Draftsman. Nine years performance on U.S. Military Construction Programs
A Civil/Structural Engineer having 14+ years of Consultancy experience in Structural Design and Project Management for Process, Oil & Gas and Power & Energy Projects. I have good knowledge and experience of Canadian, British, Indian, American & various Process industry standards.
Control System engineer with more than 14 years of experience with Yokogawa Systems Engineering
Instrumentation & Control Engineering Trainer / Technical Instructors
20 Years plus: Industry sector, Expertise Platform construction, Fitter/Mechanic, Contract Supervisor, Offshore Heath & Safety, Supervisor/Trainer, Drilling Offshore, Rig Mechanic/Chief Mechanic, Drilling Onshore & Offshore.
40 Years Experience - Drilling Sector - Experienced Drilling Consultant / Superintendent, Work-Over/Completion
Electrical & Instrumentation Engineer experienced in Testing & Commissioning Instruments in FPSO, Installation of Electrical services in the Power plants (Gas turbine, Hydro, Steam turbine), Commercial Buildings, MRT and Commissioning of Process Control System in Water Treatment Plant.
APPLICATION FOR THE POST OF BLASTING AND PAINTING SUPERINTENDENT
I have different skills from farming to superivor to general labor skills inthe oil and gas industary.amd also I have some sales experance
Worked in Precommissioning,commissioning,start up of Refiner, Petrochemical, GasPlant,worked on DCS system and fields aswell,Fully ocnversant with HSE policies. Undergone training of Fire and Gas.
Lead Drilling Fluids Engineer / Mud Engineer / Drilling fluids specilalist/ Mud Manager/Drilling Supervisor/ Drilling Engineer
Drilling, Completion Wellsite consultant
I am Mech Engg post graduate(Prodn Engg). I have experience in using CAE packages Hypermesh,Ansa and Nastran and performing static ,Normal mode and fatigue analysis
28 years experience with industrial design drafting work. Assignments have involved equipment layouts, P&ID development, material take-offs, estimating, checking and field work in addition to developing construction drawings and fabrication isometrics.
Electrical Technician with 20 years experience in the oil and gas industry.
Executive Recruiter, Recruiter, Contract Recruiter
Over 20 years experience in both Supply and Project Logistics in both Oil and Gas as well as Mining. I also have direct Freight Forwarding experience including multi modal transport involving bulk, express, heavy haulage and over dimensional.
Piping Designer (HVAC Piping and Plumbing Systems)
am right now working at OXY in Santa Cruz with WO & Completion jobs related.( as a work over site Manager) am interested in your global opportunities so Ihave attached my resume with actual phones and emails.I have experience managing different kind of peoples and oil specialties.
been welding for 25 plus years...
A total of 10+ years experience in Pipe Stress Engineering and Mechanical Stress Analysis in
Good knowledge in delivering commercial operational management including specialist area of hydrocarbon business and regulatory compliance and administration (Production Sharing Contract, Joint Operating Agreement and Gas Sales Purchase Agreement, fiscal terms)
My underground mining experience begins from 1986. Over those years I was involved in all aspects of Underground mining. Beginning from manual labor, operating underground machineries, supervising crew, training new operators, to take role as Mine Foreman
Electrical Superintendent
Graduate in Chemistry with 10 years Cement experience in Chemical Analysis OR a Graduate in Science (Chemistry ) with 14years background in Cement Plant Quality Control procedures.
Current position held: Project Exploration Geologist, Reefton Gold Project. Gold exploration 1993 - 1995, 2000 - present. Oil exploration 1996 - 1998
QA Manager with 23+ years diverse experience
All STCW certificates are valid and available
More than 26 years of experience in this feild and capable of handling induvidual stores
Water-flooding, reserve estimation, production forecasting, economic & risk analyses, reservoir characterization, tracer & pressure transient analyses. Well surveillance for development opportunities. Some thermal experience. Simulation experience to predict performance & optimize development plans.
22 Years of experience in Granite and Minerals Industry. Project Head and Managerial cadre experience.
Advanced Life Support paramedic whith wide remote medicine experience seeking new employment and challenge
Experience LTL Operations Manager looking for the next level
Application For Mechanical Inspector/Engineer
Over 15 years mining experience in underground hard rock gold mine. Good computer, training and supervisory skills.
Having 14 plus years experience in EPC projects in the area of Construction, Process and Equipments, Installation, Commissioning, Preliminary & Detail engineering & Project Management system, in Oil & Gas, Petrochemical, Chemicals sectors, etc.
Plumbing contractor and general contractor.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   [ 35 ]   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Goto Advanced Search...
Keywords: (e.g. mining engineer)Find results with:
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com