Resume - I AM SCIENCE GRADUATE HAVING 12+ YEARS OF PRODUCTION EXPERIENCE I REFINERY AND C...

Misco Jobs

Resume #81823

CONTACT INFORMATION:
View contact information...

LOOKING FOR
Opportunity in Refinery or petrochemical as a Field operator

APPLIED FOR
The Position for the job in plant operator

HOW DO I MATCH
I am a qualified B.Sc. graduate with the subject of chemistry from Gujarat University
I am working with Refinery unit.
I have total twelve years of experience.
Working as a process operator and responsible for field jobs
Having a sound background of process condition and operation
Willing to relocated and travel
Working in rotating shift
Responsible and well versed with all process related activities
Having a very good experience of Petroleum Refinery Industries Having a very good experience of star up & shut down.
I am well verse with computer operation. I have a good knowledge & working experience with Work Permit System.

PERSONAL DETAILS
Date of Birth: 30 Th June 1976
Marital Status: Married (01 Child)

EDUCATIONAL QUALIFICATION
Passing a B.Sc. graduation in JUN-1996 with 59.5% from Gujarat University

JOB PROFILE (OPERATION)

RELIANCE PETROLEUM LIMITED

I am working as a "EXECUTIVE" since May-2007.

Looking after all the section like Feed compression, Reactor section Reformer section, PSA section and Hydrogen compression section
Follow up maintenance jobs by proper isolating Pumps, Equipment and Reactor etc.
Follow up Hot work by co-ordination with the Fire & Safety personal.
Note down various parameter like Temp., Pressure, Level, Flow etc and maintain Log sheet.
Routine checking of lubrication system for Compressor, Pump and also to make up oil for the same
Start up and Shut down of the plant.
Taking regular training of safety and fire fighting
Attending of production/technical meeting
I have also a operation experience of following equipment
Pumps: Centrifugal, reciprocating
Compressors: Centrifugal (3.5 MW), Reciprocating (5.3 MW).
Heat exchangers: Shell & tubes, Plate and frame,
&Fin fan coolers
Fired heaters: Balance draft (With BMS)

HYDROGEN MANUFRACTURING UNIT
Technology by LINDE
Hydrogen complex has Three Hydrogen manufacturing unit each Hydrogen unit is design to produce 181 MT/Day Hydrogen and operating with 40-110% load.
Hydrogen unit is operated with various feed like RFG, LPG, Naphtha and NG.
Hydrogen unit has Two stage centrifugal Compressor with 3.5 MW motor.
Hydrogen unit has Hydrogenation Reactor and Desulfurization Reactors (2 Nos.) for olefins saturation and sulfur removal.
Hydrogen unit has Hydrocarbon Steam Reformer with 288 nos. of tubes and 84 nos. of Burner.
Hydrocarbon Steam Reformer has capacity of 150MMKcal/hr.
Hydrogen unit has PSA section to purify hydrogen up to 99.9%.
Hydrogen unit produce 53 ton HP steam for export to CPP.
HYDROGEN COMPRESSION UNIT

Compression unit has Two Stage Double Acting Four Cylinder Reciprocating Compressor
Compression unit has 3 Nos. of compressors.
CAPACITY:-

IST Stage: - 1, 19,000 Nm3/hr (10,715 Kg/hr)
II ND Stage: - 68,800 Nm3/hr (6,190 Kg/hr)

DISCHARGE PRESSURE:-

IST Stage: - 37.2 Kg/cm2
II ND Stage: - 71.1 kg/cm2

Motor Power: - 5.35 MW.
Comp. make:- M/s. Thomason International –Netherlands.

I have also experience of

SAT LPG MEROX (CAP. 19000 BPSD)
UNSAT LPG MEROX (CAP.60000BPSD)
TECHNOLOGY USED BY UOP-MEROX PROCESS
The process contain following sections.
A) H2S Adsorption in amine solution
B) Mercaptants Extraction & Merox caustic Regeneration.
C) Oxidation using MEROX WS CATALYST.
In the FEED H2S is 10994 wt. ppm & Mercaptans sulfur is 827wt.ppm
The plant is highly protected with FIRE & TOXIC GAS leakage using by F & G AND Deluge system design by WORMALD
DCS system is invensys Foxboro.
The DCS system is microprocessor based design that will be fully tested & reliable
The DCS system is Distributed to remote plant interface buildings (PIBs) with operator –console located in plant control center (PCCs)
For Unsat LPG & Sat LPG Merox ESDs are listed in cause & Effect Diagram. & Trips also indicated

COMMISSIONING AND START UP ACTIVITY CONTAIN
TRAINING PROGRAMME

*Refer P & ID of plant
*Attend hot & cold work in plant
*Flushing & Cardboard blasting of pipelines.
*Nitrogen purging of all plant loops.
*Leak check of plant at (low medium and high load)
*Furnace commissioning
*Stroke checking of all plant control valves and pumps
*Checking of FIRE and GAS Detection System and also fire water deluge system
*Plant start up activity like hydrocarbon inventory, oil flushing, cold circulation
Long loop circulation etc.
*Interlock loop checking
*Undergone various training modules designed by Reliance Jamnagar covering all the process details / Operational Training.
*Undergone FIRE, SAFETY and FIRST AID training imparted by Health Safety and Fire Dept.
*I had also taken training of ISO 9001-2000, ISO 14000 and OHSAS 18001
*I had taken special training on "trouble shooting on LPG Merox units" conducted by UOP Experts.
*HAZOP Study and training
*LEL Monitoring
*Fall protection & safety training
*Risk Analysis
*Familiar with Hot work and cold work permit
*Toxic material handling and operation
*Practical training, SCABA set, Breathing mask, Cl2 toner handling, Tower mounded remote controlled fire monitor
*Occupational First-Aid training

ROUINE WORK:-

*Give clearance of equipments during Start-up from field
*Watch and maintain all parameters of the plant
*Check Oil and Vibration of all pumps
*Operate compressors, pumps, heat exchangers and all equipments
*Rectifie ab normal conditions, oïl spillages etc.
*Furnace operation
*Change over of pumps (Centrifugal and reciprocating)
*Handled emergency of plant
*Handled emergency plant shutdown and normal shutdown
*Attain all emergency of plant from field
*See all equipments running in normal condition
*Handover equipment for maintenance
*Plant shutdown and startup
*Furnace operation Fuel gas Balanced Draft (Hydrogen Furnace)
*Give suggestion for improvement of operation, quality, of product
*Safety practice role in emergencies
DEEPAK NITRITE LIMITED

I was working in Deepak nitrite as a "plant Operator/chemist" between JUN-1997 to MAY-2007
.Deepak nitrite limited which is ISO 14000 company
Nitro Aromatic Division, an ISO 9002 & 14001 certified companies is a private Limited organization started in 1990
It is a Leading PETROCHEMICAL UNIT Manufacturing MCB, NCB, PNBC, ONCB, DNCB, ONT, PNT, DNT are used in Pharmaceutical, Dyes Intermediates, and Agrochemical Industries
The plant has an annual capacity to produce 20000 MT of PNCB, ONCB, and PNT & ONT
The company has three major plants.
MCB Plant (Mono chloro Benzene Plant)
MPN Plant (Multipurpose Nitration Plant)
MPD Plant (Multi Purpose Distillation Plant)
The plant uses the latest technology Distributed Control System
(DCS) supplied by FOXBORO, USA, MARIO BIAZZI, SWITZERLAND and BEFS FRANCE
6. Job Profile

Working in MPN plant and MPD plant which is multipurpose/multiproduct continuous nitration/distillation plant.
Handling hazardous chemicals like MCB, TOLUENE, MNT, DNT, DNCB, CL2, CON, HNO3 & H2SO4 apart from our main products.
I have got rich experience of plant operation like Pumps, Valves, Reactors, Distillation column, Stripper Column, Crystallizer. Petroleum Storage Tank, Compressor.
MY CURRENT EXPERIENCE OF CURRENT REFINERY JOB

At present I am working in world largest grass root refinery which is located in JAMNAGAR, INDIA

During this job I am getting too much of experience of commissioning pre commissioning, and running industry

During this job I was in charge of field executive up to six month after getting training in old refinery

Then after I am transfer to new refinery commissioning group and there I have learn too much activities of commissioning, pre commissioning,

Which include mechanical clearance, hydro test, and final box up of pipelines, commissioning of underground systems like OWS fire water network, storm water Network
Inspection of critical vessels, like reformer box, waste heat recovery exchangers flare knock out drum
Solo and load trial of different type of motor like HT motor LT motor as FD fan, ID fan, fin fan cooler, LPG pump, Lube oil pump, condensate pump and also a trial of centrifugal compressor,
I have also experience of different type of catalyst loading like HDS REACTOR, REFORMER, HT SHIFT CONVERTOR, and PSA catalyst loading,
I have also experience of system leak testing and inertization of loop and also check the system control logic and BMS logic testing with reference to panel and PIB
I have also experience of long loop circulation and catalyst reduction activity,
I have also experience of alkali boil out activity in waste heat recovery section and also refractory dry out activity

OBJECTIVE:

To work for the Organization that helps me to bring best of my performance and to do my work with honestly, commitment, loyalty, and sincerity. Hard work and discipline are my strength and preferably my way out to this competitive and professional world.

KEY SKILL:-

*Field operation and maintenance, trouble shooting, refinery operation, gas processing plant

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2401 to 2450 of 15373)

Go to Search Parameters...

Brief Description

Sr. Piping Designer - CadWorx/AutoPlant

An ambitious and highly skilled Petroleum engineer with extensive experience in reservoir engineering, well testing, reservoir fluid analysis, ISO certification, production, management, product development and launch, and customer support.

Contracts specialist with Engineering background having more than two decades experience in both Operating and Contracting companies.

I am a 22 years experienced african in the petroleum industry. I have a very good skill in general management and very good in credit and collections

Piping Design Engineer with 15 years of international experiences in the EPCM environment. Performed at a various level in the engineering design to construction site for oil sands projects, refineries, petrochemical, pump station & pipeline, and onshore facilities.

Senior Reservoir Engineer with 15+ years of broad based international experience gained in reservoir simulation, field appraisal, field development planning, reservoir surveillance, reservoir management, wellsite operations and working in integrated multi-disciplinary study teams.

Graduate, Electrical Engineering Degree Holder, Working In Indian Petrocehmicals Corporation, India Since Last 19 Years - As A Senior Technician (Supervisory Post)

Senior process engineer upstream oil and gas design consultancy. Ammonia plant operation manager. Process engineer for chemical petrochemical plants

20 years of experience as a Mechanical Engineer working within the water treatment industry

QA/QC Coating Inspector NACE Certified # 10362

Driller-15 Years Toolpusher-3 Years Oilfield Experience 30 Years

Reservoir Engineer

Automotive electrician.

PDMS Instrumentation Designer

Well experienced in the field of Mechanical maintenace of rotating equipments like compressors, pumps,turbines in Petrochemical and Oil & Gas Industry in India and Middle East. Worked with Shell affiliate NOCIL in India, Reliance India and Sabic, KSA as Mech.Technician & Supervisor.

QA/QC Engineer in onshore oil field with ASNT Level -II in UT RT PT MT . M.TECH and B.TECH in Mechanical Engineering.B.TE

Electricial technician now i am working in mask oil qatar

Experienced Construction Superintendent

Underground Production Miner

PDS(2.5Years),SmartPlant,Navisworks,MicrostationV7.1(3Years),AutoCad2006(5 years),MS-Office

I have practiced my knowledge and expertise in these fields: Gas Measurement, Gas Plant and Gathering Operations, Management, Safety and Environmental awareness.

Skill: 11 Years Structural designer ( Including 2 Y rs. in PDMS , 2 Yrs. in PDS & Micro-Station ,3 Yrs. in X-Steel , 4 Yrs. Auto-Cad ) Qualification: B.E Production Engineering - First class – April 2009 – MIT Anna University, Diploma in Mechanical Engineering – First class - April 1998.

Certified Marine Mechanic. Maintain and organize all oil spill equipment and sea survival equipment. Oil Response Team/Technical support

Results-driven manager backed by 8 years proven record of accomplishments and responsibilities in Business Analysis, Project Engineering and Management of various oil and gas.

All aspects of underground mining,team leadership,emergency response,mine control monitoring

PhD in Minerals Engineering, MSc and BSc in Mining Engineering. Experience and training in mining companies. Proven ability of teaching and research at universities. Capable of adapting to changing environments, strong team player, hardworking, honest and reliable. .

I start my profession life from Techno Agriculture when I done Agriculture machinery repairing. After that I went to Saudi Oger and work on Hydraulic

Total 7+ years of experience in Refinery, Petro chemical, Power Plants (steel & RCC structures) and Industrial Buildings.

14 years of oil&gas,petrochmical QC and construction experience

Managed Wind farms relevant IPO project for the listing on Singapore stock exchange on behalf of Arcapita Bank;

Project Engineer with filed experience in Marine industry, oil & gas and renewable energy industry

Qualifications: NTS 3 and 4 courses: Ind. Electronics, Eng. Science, Mechanotechnics, Eng. Drawings and Applied Mathematics. I worked as an electrician and later as a Hoist Technician. I have experiance in Primary Crushers, Double drum and Koepie Winders (Hoists). Compressors, Ventilation Fans.

12 years experienced of AutoCAD 2D & 3D in Building Services (HVAC,Fire Protection, Water & Drainage)

I AM SCIENCE GRADUATE HAVING 12+ YEARS OF PRODUCTION EXPERIENCE I REFINERY AND CHEMICAL INDUSTRIES

A qualified mechanical engineer having a litany of professional courses with 11+ years of extensive track record in heading key engineering divisions and technical operations/maintenance, across diverse geographical locations in the Oil & Gas industry, seeking a managerial/engineering position with

Certified Master Electrician with 18 years mining and smelting experience

“Petroleum and Gases” University Ploiesti, Romania

Modeling and estimation deposits, planning, optimization open pit in mining software. Scoping, prefeasibility, feasibility stages. Strategic development.Market research. Participation in exhibitions and conferences. Supervision of production process.Design & testing of new equipment.

To obtain the position of Instrumentation Technician/Production Operator.

Over 6 years of experience in analysis and design of steel and concrete structures

PhD in Structural Geology with 20+ years Senior/principal Geologist experience in mineral exploration. 15 years experience geomodelling using GoCad and Project Generation.

I have worked many years in the construction field and I have knowledge of all aspects from ground breaking to completion.

Engineering Graduate( B.Tech. Chemical Engg. – 4 years degree course) with 16 ½ Years Experience in Work Over Operations / Supervisor / Completion

Presently working as Safety Engineer (Contract Hire through agency) for Abu Dhabi National Oil Company, ADNOC- Abu Dhabi, and U.A.E from March 2006.

15 Years Geospatial Experience. Oil/Gas, Pipeline Design/Engineering, Land Management, Geospatial RDMS

I am an Instrument Designer with more than 25 years experience, predominantly in the Oil and Gas Industry. I have extensive supervisory experience in multi-discipline and multi-national working enviroments.

Lead Auditor - ISO 9001:2000 Series; CSWIP 3.2 Senior Welding Inspector; CSWIP 3.4 Radiographic Film Interpreter for Group A & B materials; CSWIP - BGas Grade 2 Painting Inspector; 28 years of oil and gas industry experience both onshore and offshore. 5 years Refinery experience as Plant Inspector.

Talented and accomplished Naval Architect with extensive FPSO, FSO Conversion, Ship Design and Shipbuilding background particularly in the areas of trim and stability, strength of ships and ship structures. Proven ability to design FSO, FPSO and various types of ships. Able to liaison between tech

Well established Petroleum Exploration and System Analyst with over 15 years of experience in the international petroleum industry combined with a PhD in Petroleum Geochemistry.

I am a fully qualified and experienced Health, Safety and Environmental professional with 14 years upstream Oil & Gas industry experience working around the world for International Oil companies

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 [ 49 ] 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out