Resume - Automotive Engineer Trade certificate. Post trade Diesel Fitter Trade Certifica...

Misco Jobs

Resume #81836

CONTACT INFORMATION:
View contact information...

Predominant Work Skills
* More recent experience in Roseberry Mine where coal, gold and other minerals are mined. I have been working on Caterpillar, jumbos, boggers, drills, Atlas Copco machinery as well and as other small engines, pumps, off road forklifts and various other sorts of equipment.
* Underground Diesel Fitter. Work exposure on Tamrock Axera 7, Axera D07 Superdrill, Solo 7/15 and Cat R2900G.
* As a qualified Diesel Fitter and Mechanic experienced from small engines, petrol and diesel vehicles including cars, light commercial vehicles, buses, four wheel drives, all trucks, trailers, full range of forklifts including small, off road ones and large ones that lift 45 ton (used on a wharf). Furthermore, other specialized wharf equipment including plan-marine (capable of lifting over 100 ton), and Terberg which is a very heavy multifunction prime mover capable of pulling trailers with extremely large amounts of weight upon them.
* Proven management and supervisory skills in a mechanical workshop and office setting.
* Experience in hydraulics, electrical controlled units and other electrical wiring applications.
* Proven ability to work in a remote area and unsupervised, organise work tasks, make excellent diagnostic decisions about mechanical problems, work to tight shipping and any other imposed deadlines, order and procure parts.
* I am also the employee representative for workplace health and safety.

Education:

* 1976 - School Certificate
* 1981 - Completed Automotive Engineering trade course.
* Completed certificate course on Nippondenso Air Conditioning Systems.
* 1982 - Completed Automotive Engineering Diesel post trade course.
* Certificate course in Overhaul and repair of Borg Warner 5 speed manual transmission.
* Certificate course in Mitsubishi Cordia Turbo new model familiarization Certificate course in Range Rover EFI.
* Certificate course in Jaguar 1989 M.Y. Introduction.
* Certificate course in Range Rover 1990 M. Y. Introduction. Certificate course in Rover 827 Vitesse and 1990 M. Y Introduction. Certificate course in Jaguar 1991 M. Y. Introduction.
* Certificate course in Jaguar XJ6 Mechanical.
* Certificate course in Basic Mig Welding of Steel.
* Certificate course in New Generation Star Tester.
* Certificate course in El Falcon Introduction.
* Certificate course in UN Explorer Powertrain Electronics. Certificate course in Professional Service Advisor. Certificate as Approved Inspection Station Accreditation. Certificate course in Land-Rover Associate Technician.
* Certificate course in The Service and Parts Marketing & Customer Contact Skins - Frontline Staff.
* Certificate in Holden warranty training – beginners.
Occupations:

2008/2009 - Barminco – Diesel Fitter.
I have recently been working at the Roseberry and Avebury mine, Tasmania as an Underground Diesel Fitter. Work exposure on Tamrock Axera 7, Axera D07 Superdrill, Solo 7/15 and Cat R2900G, pumps, small engines, off road forklifts and various other mechanical equipment. Underground and general safety induction for Avebury mine site undertaken and passed. Even though Avebury mine closed I was kept on by Barminco and was until moving to Queensland working at Roseberry.

2008 - Television Services Fitter - Self Employed.
Subcontract to Access TV Services fitting Austar. Working at heights with safety gear and generally fitting satellite TV services.
2004 to 2008 Sea Road formerly Patrick's Logistics – Diesel Fitter
Employed by Sea Road as a Diesel Fitter and have so been for nearly 4 years. I service and repair all light vehicles, heavy vehicles and their trailers, company vehicles, forklifts, cranes, plan-marine and wharf related equipment.
Most of the equipment and machinery is heavy duty diesel equipment that requires a good working knowledge and aptitude of not only the mechanical functions but also the electrics and hydraulics of the machinery. I have developed a well rounded mechanical skill set. I am able to apply those skills in a working environment to make capable diagnostic assessments in relation to the mechanical problems and repair that equipment safely in a timely manner and in accordance with company policies and procedures.
The wharf runs to very tight time schedules and therefore I have developed the ability to repair machinery accurately and quickly in order to get the machinery running properly.
I follow all work safety practices and procedures and I currently carry out the role of employee safety representative. I also work alone for a large percentage of my time and as such I have well developed time management and organizational skills to work largely unsupervised.
2001 to 2004 Burnie Motors - Team Manager.
I was employed with Burnie Motors as a Team Manager. I was responsible for the management of one of two teams ensuring budget targets were met (later one other Team Manager left and I took over managing both teams). I reported to the Service Manager and worked in conjunction with him to ensure the teams were running smoothly and achieving the set goals. I greeted customers and advised them on their service needs.
If there is an on-going problem with a car that has not been rectified then I was responsible for exhausting all avenues of research and as a last resort liaising with Holden itself. I also ordered the parts necessary for jobs and completed the costing of each job. Sometimes warranty jobs may come in and I am responsible for ensuring all relevant paper work required by both the company and manufacturer are completed correctly. I provide leadership skills for my team to help us work together as a team and ensure requirements were at least met and where possible exceeded and resolve any conflict that on occasions did arise quickly and amicably.

1999 to 2001 Tilford - Service Advisor
Whilst employed with Tilford I worked as one of their Workshop Service Advisor where I ensured that the work was completed in a correct and timely manner. I supervised the mechanics and liaised with other Service Advisors to ensure that all duties were completed to an excellent standard. After a time I was then rotated into the position as Service Advisor where I liaised directly with the clients and as and when necessary with Ford/Land-Rover/Jaguar/Daihatsu directly. I was responsible for ordering parts, costing, conflict resolution, fault diagnostics, organizing bookings, loan cars and general servicing requirements.

1995 to 1999 Jackson Motor Company - Service Advisor.
Duties Much the same as at Tilford except that when the Service Manager was away I took on the role as acting Service Manager. Also when we down on mechanics I would complete mechanical jobs as and when required.

1993 to 1995 Service Technician in own business
I was a partner in my own business. I provided mobile mechanical services to the North West Coast on a range of different vehicles, trucks, generators, pumps, tractors, buses as well as other vehicles. I sourced customers, parts, invoiced and chased any outstanding debts to the business. I also offered servicing advice to clients and offered a paint-less dent removal service to vehicles.
1992 to 1993 Service Technician - Von Bibras
I was employed as a casual Service Technician at their wholesale shed where I prepared and serviced vehicles that had been bought from the auctions on the mainland. Completed other mechanical duties as and when required.
1991 to 1992 Branch Manager-All States
I was employed as a Branch Manager for All States Transmission in NSW. I was responsible for the day to day running of the branch, canvassing clients, quoting, reporting and ensuring budgeted targets were met. I was also responsible for dealing with any conflict that arose between the business and the clients, which included giving evidence at the Motor Traders Association when disputes arose between clients and the Company.
1988 to 1991 - Jaguar Rover Australia - Senior Service Technician Durability.
From 1988 to 1991 I worked directly for the importers of Jaguar, Rover and Peugeot (JRA). Austral, Denning and PMC coaches were also owned by JRA. I was the Senior Technician in our durability section which involved working unsupervised for large amounts of time preparing prototypes for durability testing in remote parts of Australia. I was also involved in setting up test rigs and component manufacturing. I was then responsible for recording the results and notifying my supervisor or Jaguar Rover UK as required.
Whilst employed in the position I used sophisticated diagnostic equipment that required the ability to interpret the results and feed them on as required, as this information would be used for rectifying faults for the final product. I have also been involved in testing faults with the Austral, Denning, PMC side of the coaches. Unfortunately, the company went out of business and all employees were made redundant. However, as a result of my excellent service to the company I was offered a short - term position with Land-Rover Australia until the army contract was fulfilled. During my time at Land Rover I was involved in testing Land Rovers and manufacturing components as and when needed.

1985 to 1988 lnghams Chickens NSW - Workshop Manager

I was employed as a Service Technician/Manager for their workshop. Whilst employed in this position I was responsible for the running of the mechanical workshop and I had one other Service Technician under my direction. I was on call out and completed mechanical services as required.

I worked on their Chicken lines, pumps, generators, small motors, tractors, trucks, forklifts, fleet cars, vans and other machinery as and when required. I was responsible for ensuring things were fixed and serviced in a timely manner. I ordered lease paste your resume here. Don't include 'Contact Information' because it will be added automatically from corresponding field above. If you used symbols/special characters such as bulletted lists make sure they are properly displayed. We suggest you to replace bulleted list symbols with minus symbol (-).

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8601 to 8650 of 15507)

Go to Search Parameters...

Brief Description

Over ten years of experience in the field of Electronics and Computer Engineering

Instrument design engineer in BHEL (Bharat Heavy Electricals Ltd), Hyderabad, India in Control & Instrumentation (C&I) department in Steam Turbine, Compressor & Gas turbine Engineering division. DNV certified HSE lead auditor

Since 1995, I have worked as a Planning Engineer / Maintenance Planner in Oil & Gas Industrial, both on offshore and onshore terminal, worked for ARCO, BP and CNOOC companies. Response for Opertioans and Maintenance work activities, good at CMMS-MAXIMO, MS Project, P3 Project Planner.

• 16years of work experience in India/Indonesia in Welding, QC and Site/Construction management in EPC turn key projects (Polymer, CTA, PTA, and Steel). • CSWIP 3.2 Senior Welding Inspector •ASNT NDT Level III in RT, PT & MT •Computer literate in Project Management tools.

Completions/Production Engineering Experience

Experienced health and Safety professional, excellent Computer Skill, knowledge of H&S MS (OHSAS 18001); EMS (ISO 14001) and QMS (ISO 9000:2000; Qualified Auditor, Training Instructor.

working in Malaysia ( far east) from 3 and 1/2 yrs. Looking for jobs in oil & gas fields . In field operators or panel operators position with better salary as a long term contract basis preferable in far east or middle east.

Successfully completed the Final Bill of Saudi Riyal 120 million Steel Plant project (Civil Works) with the Main Contractor Awabeded Ssang Yang- Korea and successfully completed the Internal Audit before the External Audit to obtain ISO 9002 Certification for Company's Quality System.

Technical and Operations Experience. Currently Long Range Planner / Dispatch Engineer. BEng educated at Laurentian University School of Engineering in Sudbury, ON, Canada. I am looking for advancement opportunities, in a fast-paced and team-oriented workplace.

Total 7 years of industrial experience in the large manufacturing set-up/project, in the field of Environmental Management and Resource Conservation and Infrastructure Development projects planning, operation and monitoring.

I am a degree holder in Mechanical Engineering, having more than 13 years of experience in various types of Refinery and Petrochemical project.

Cost Engineer with exposure to Planning. Russian-mother tongue. English - fluent. Arabic - working knowledge

13 Years Strong Experience & Exposure in The Arena Of I&C Systems Successfully handled numerous large scale projects Worked with SCADA, PLCs and DCS Strong at commissioning, testing, documentation and handling of O&M Effectively led teams to deliver positive and timely results

16 years experience in the mining field both surface and underground, hard & soft rock. Construction and Development. Supervisory exp. Drilling and blasting & instructor. BCOA Supervisory Trained and a Certified Surface and UG MSHA Trainer. Illinois Certified Supervisor. Shot Fire Certified.

Request/Application for the Opportunity - geoscience/Environmental positions

I am the Environment, Health and Safety Practice Leader in Western Canada for a national consulting firm. I have 10 years of experience in managing and coordinating a multitude of EH&S projects for clients across Canada. I am looking to expand my experience base within private industry.

13 yrs Professional Exp.which include Project Management, Engineering and Estimation. Responsible for the Implementation of QMS(ISO9001-2000). Countries of Work Exp: India,Singapore,UAE Languages Known:English,Hindi,Kannada,Tamil & Telugu.

I try to get better conditions and get better live with my skills and competency

My Nine years and Six months of experience , I have exposure in Power & Utilities. I have hands on experience for Gas Turbines, Steam Turbines, D. M. Water Plant, Plant & Instrument Air Package comprises of Dryer and Compressors, Raw Water Treatment Plant, Cooling Tower, and OSBLs.

Global experiance in the construction field from horizontal to vertical projects and from start to finish level.

Around 8 (plus) years of experience in various fields such as Project management, Project execution, Project Co-ordination, Industrial

MATERIALS ENGINEER/CONTROLLER/SPECIALIST-CATALOGUING-INVENTORY-PREPARE PURCHASE DESCRIPTION-ERP-SAP MM-CMT-STRING-E-SPIR-MMS Etc.

I am a CWI, Level II in MT, UT, PT and RT film interpretation. I have US and overseas QA/QC project and manufacturing supervisory experience in the construction, petroleum, mining and aerospace industries. References and copies of certs. will be provided upon request.

Professional trainings and practices in Geological and Mining Institutes including well site practices, modeling of gas reservoirs and underground gas storage production, geological prospecting and drilling geophysics, control properties of mud-logging and cementation

south african openpit blasting ticket

Team Leader Shift Supervisor, Trainer: Operation at Refinery Processing Plants, Remote Oil & Gas Production Field and High Pressure Systems at NGL Processing Facilities LPG Plant including Petroleum & Petrochemical Utilities. Professional member MInstLM & MCMI UK, MBA Prod. Ops. Management, BSc, BA

Comprehensive practical and commercial experience since 1997 in every aspect of cathodic protection systems on all types of structures, comprising detailed design preparation / engineering calculations and Preparation of proposals with design etc.

Automotive Engineer Trade certificate. Post trade Diesel Fitter Trade Certificate. Over 30 years of wide ranging experience including heavy euipment and mining equipment. Excellent diagnostice skills.

Worked on Procedure High Pressure Vessels, pipe welding,Millwrights, Mine Maintenance Supervisor Worked for 5 years (1994-1999) Steam and pressure pipe fitter, welding

Heavy Equipment Operator with 30 years experience both underground and open pit

I have served 20+ years in the Marine Corps and possess great Manager skills. I have an active Top Secret/SCI Clearance. Security+ certification (Network Security). I am looking to make a difference in the Civil sector as I have in the military.

Diploma in chemical eng

Planning, market analysis, oil pricing mechanism/simulation and modelling, forecasting, market research, oil industry management, downstream oil industry facilities monitoring, fuel quality monitoring and evaluation, project management, project proposal preparation, oil and gas project evaluation,

Four years experiences in 3D seismic data processing (PP, SS, PS) and reservoir characterization (fracture detection using AVAZ; AVO and inversion), more than six years experience in commercial geo-software development.

-fabrication procedures (elaborate and implement) cutting, rolling, bending, drilling, grinding, welding, visual inspection, etc.-WPS and PQR elaborating in accept with ASME Sect.9 and EN 287+288 -technical drawing analyze for fabrication :assembly, materials necessary, order or erectionWelders/fitt

More than 30 years experience as a Contract Engineer, Contract Administrator and Quantity Surveyor, including expertise in Project and Construction Management; working with Oil Companies, E.P.C. Contractors and Consultants on a variety of Oil & Gas, Petrochemical, Building, Civil and Power project

I have 5 yrs experience in the Oil Industry, 3 of those years were in Operations where I Utilized Total Quality and Safety Management Principles to operate successfully in a stressful, fast-paced, deadline-oriented, ¡§no errors¡¨ environment.

Experience in Project Management and Marine Construction

Planning, Scheduling, Project Controls

Piping engineering-layouts/specification/plot plan/isometrics

Production operator at oil and gas company, experiences more than 8 years, 12 years education ( technical high school)

NEBOSH- International General Certificate in Occupational Health and Safety(United Kingdom) Abu Dhabi

Versatile IT Project Manager with > 15 yrs experience in the IT and Upstream Petroleum Industry implementing IT solutions (including software, hardware, firmware);evaluating and recommending solution options, supervising solution implementation, and QA. Able to deliver Projects on time and on budget

Subsea Project Engineer - Project Management - Deep Water Installation

Twelve (12) years of diversified working experience in Quantity Surveying/Measurement, Cost Estimation, Cost Control/Monitoring and Contract Administration of miscellaneous projects relevant to Oil & Gas and Petrochemical Industries.

Resume - Nilesh Roy - Service Delivery Manager - IT Infrastructure - 12+ years of experience.

Operation and maintenance of Boilers, combined cycle gas turbine power plants, and utility services

Procurement/Supply Chain/Materials Management

I am a hard working guy and just need a chance to show my skill.I have a lot of interest in designing field and simulation.I have done a ^ month course in Simulation and design and also in polymer engineering and petroleum industry course.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 [ 173 ] 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out