Resume - Power plant operation and maintenace management, power contract performance admi...

Misco Jobs

Resume #81868

CONTACT INFORMATION:
View contact information...

Age: 42 years old
Birth Date: July 16, 1966
Birth Place: Aloguinsan, Cebu
Religion: Roman Catholic
Citizenship: Filipino
Civil Status: Married

Profession: Professional Mechanical Engineer, Masters of Science in
Mechanical Engineering and Business Management Practitioner
PhD - Technology Management
Preferred Position: 1. First priority: - Plant Technical Services & Planning
Manager or Power Contract Administrator
- Operation/Maintenance Manager
- Plant Manager
2. Second priority – Assistant Manager/Executive Technical
Staff/Assistant Project Manager
3. Third priority – Operation/Maintenance Head
- Technical Planning & Scheduling
Head/Supervisor
- Power Plant Combustion Engineer/Head
Desired salary: Industry Standards

2. Educational Attainment

Post Graduate: Cebu State College of Science and Technology
Cebu City
2000 - 2004
Graduated -Doctor of Philosophy in Technology
Management

Dissertation Paper "Operations Management of Leyte
Geothermal Power Plant: Enhanced Corporate Performance
Standards"

: University of San Carlos
Cebu City
1998 - 2000
Graduated - Master of Business Administration
(Availed NPC Scholarship Program)
Thesis/Research Paper "The Managers and Supervisors of Leyte
Geothermal Power Plant 1: A Change Inventory for Leaders" ;
"The Investment Decisions."

: University of the Philippines
Diliman, Quezon City
1994 - 1996
Graduated - Master of Science in Mechanical Engineering
Major in Heat Power
(Availed NPC-DOST Scholarship Program)

Thesis/Research Paper "Turbine Water Washing Technology";
"Solar Radiation and Atmospheric Clearness Number at Certain
Atmospheric Condition;"

College: University of San Jose Recoletos
Cebu City
1982 - 1986
Graduated - Bachelor of Science in Mechanical Engineering

: University of San Jose Recoletos
Cebu City
1986 - 1987
4th Year Level - Bachelor of Science in Electrical
Engineering

Secondary: Abellana National School
Cebu City
1978 - 1982
Graduated – Secondary

Elementary: Zapatera Elementary School
Cebu City
1972 - 1978
Graduated - Primary (Best in Art)

3. Civil Service Eligibility

Registered Mechanical Engineer (License no. 0035752)
Professional Mechanical Engineer (RA 8495, ME Law)

4. Employment Record

2007 to Present Manager, Plant Technical Services and NPC, PDPP
Head Quality Management, Environmental, Complex
Health & Safety Management System
(ISO 9001:2000, EMS 14001:2004;
OSHAS 18001:2007)

2004 to 2006 Officer-In-Charge/Acting Manager/ NPC, IPPCM
Contract Administrator Manager Visayas

2001 to 2003 Principal Engineer A/Supervisor NPC, IPPCM
Visayas

12/99 to 2000 Principal Engineer A/Supervisor
(or Operation Superintendent
"Acting Capacity") NPC, LGPP1

10/97 to 11/99 Principal Engineer B
(Middle Supervisor, "Senior Control
Engineer.") NPC, LGPP1

10/92 to 09/97 Principal Engineer C
(Junior Supervisor, Turbine Generator
Engineer.") NPC, LGPP1

07/90 to 08/92 Principal Engineer C
(Junior Supervisor "Electrical Control
Engineer.") NPC, LGPP1

08/89 to 06/90 Junior Engineer NPC, VRC

07/88 to 07/89 Engineering Assistant NPC, VRC

Legend: NPC – National Power Corporation
PDPP – Panay Diesel Power Plant Complex
IPPCM – Independent Power Producer Contract Management of
Power Purchase Agreement, Rehabilitate Operate Managed &
Maintain Contracts and Energy Conversion Agreement
LGPP1 – Leyte Geothermal Power Plant 1

6. Work/Job description

I. Position: Manager & Head of Quality, Environmental, Health & Safety Management
System (ISO QMS 9001:2000; EMS14001:2004; OSHAS 18001:2007)
II. Work Station: Plant Technical Services Division (PTSD), Panay Diesel Power Plant
Complex (PDPPCx), Visayas region
III. Work Experience: 2007 - Present

General Function:

Responsible for the effective and efficient management of the Plant Technical Services Division that covers from Planning & Scheduling up to the implementation of the policies/guidelines related to Plant Safety/Health, Quality Management System Assurance, Environmental and Information Technology aspects which include fuel management/spare parts supply of the PDPPCx.

Duties and responsibilities:

1. Provide direct staff works to the Plant Manager with regards to Planning, Leading, Organizing and Controlling aspects of the power plant complex Operations, Maintenance & Administrative/Finance management.
2. Direct implementation of the established policies and guidelines to ensure and maintain the optimum performance of the PTSD in coordination with Maintenance, Operations and Admin/Finance divisions.
3. Recommends solution and participate in clear-cut decision making to NPC top management pertaining to unresolved issues/claims and attaining plant performance targets;
4. Formulate short term and long term plan in line with the corporate mission and vision which include budget operational plan of the power plant's generating unit, power generation forecast, preventive and predictive maintenance and manpower utilization of the power plant;
5. To coordinate and extend assistance with other corporate functional groups and external customers in tackling the main objective of the corporation.
6. To ensure a smooth operation of the Plant Technical Services Division's business process.
7. To act as Quality Management Representative: Quality Management System ISO 9001:2000, Environmental Management System ISO 14001:2004, Occupational Safety & Health Aspects 18001:2007, and to lead/direct the Internal Quality Audit in the power plant which relates to the requirement of the Quality Annual Plan and Targets.
8. To prepare & finalize the over-all budget annual requirement of the power plant such as Annual Procurement Plan of Capex and Opex.
9. To perform other assigned managerial (Power Plant OIC-Plant Manager) & technical task in line with the Mission, Vision, Quality, Environmental & Safety Policy of the plant
10. To lead/prepare/implement technical services projects related to power plant modification system, major operation & maintenance requirement (e.g. Major Engine Overhauling, Preventive/ Predictive Maintenance), and upgrading projects in line with the bar schedule, budget/cost / manpower requirement.
11. To lead/direct in the preparation of the following technical plant reports:
11.1 Monthly operational Report (covers from Force Outage, Plan/Maintenance Outage, Heat Rate, Energy Generation, Net Utility Revenue up to fuel/lube oil/chemical cost, total plant production cost, accounting of Station use, Station loss, etc.,Safety & Environmental report
11.2 Daily Plant Status Report, Daily Fuel Inventory Report, Monthly Fuel Billing report, Daily Fuel/Water/Lube oil Analysis Report, Fuel ordering report, Prepare/approved Requisitions pertaining to the approved project/program related to Technical Services, Environmental, Health & Safety aspects.
12. Ensure proper channeling of upward/downward/circular form of plant level, corporate communications and office protocols;
13. Ensure proper implementation of 5s Good Housekeeping;

I. Position: Acting Division Manager/ Contract Performance Manager
II. Work Station: Independent Power Producer Contract Management (IPPCM) Division
Visayas Region
III. Work Experience: 2004 - 2006

General Function:

Responsible for the contract administration of Visayas Independent Power Producer or IPP Plants through the implementation of policies, guidelines and provisions as provided in the Power Purchase Agreement (PPA) and Rehabilitate Operate Manage and Maintain (ROMM) contract between NPC and IPP Owner.

ROMM coverage at Naga Power Plant Complex (NPPCx) – Consists of Two Coal Fired Thermal Plants, Two Land Base Gas Turbines, Six Units of Diesel Engines, Plant Wide Water Treatment Station, Fuel Tanks Farm, Coal Yard and Mooring Facilities with total plant combined capacity of 203 Mw.

PPA coverage – Energy Fee accepted by NPC from Philippine National Oil Company-Energy Development Corporation (PNO-EDC) that covers the Nine Geothermal Power Plants built, operate and managed by California Energy Company with total combined capacity of 500 MW.

Duties and Responsibilities:
1. To establish the long/short term plan at least cost and optimized resource budget utilization of the business cycle/process of IPPCM-Visayas operation in line with the corporate mission and vision;
2. To direct in getting the division's subordinates/members to move in the direction that will achieve objectives and deals with establishing standards for plant performance, measuring performances against target;
3. To maps out courses of action that will commit individuals, other functional groups in achieving the common corporate goals.
4. To lead/organize in the implementation of the following office and field works activities:
OFFICE WORKS:
4.1 Approval/confirm/feedback of the memoranda/letters and ensure the accuracy of payment/claims reflected in the disbursement voucher that within the capacity of the Division Manager:
4.1.1 Give feedback and prepare Internal and External memoranda;
4.1.2 Ensure proper channeling of upward/downward/circular form of corporate communications and office protocols;
4.1.3 Ensure proper implementation of 5s Good Housekeeping;
4.1.4 Ensure that the specific applicable provisions are reflected/covered in the annual Tender Documents and Terms of References for the supply of fuel (Bunker C/Diesel and Imported/local coal) requirements at NPPCx;
4.1.5 Energy fee and operation/maintenance fee base on Energy Minimum Off-Take;
4.1.6 Power Purchase billings based on nominated capacity fee;
4.1.7 Fuel Efficiency Bonus Claims;
4.1.8 Customs Duties and Taxes claims;
4.1.9 Ash pond maintenance/Calibration sharing fee;
4.1.10 Coal/Oil Fuel regular billings;
4.1.11 Energy and Fuel billings Inflation Fee adjustments.
FIELD WORKS:
4.2 Leading/directing in the implementation of the following:
4.2.1 Plant/Capacity Performance Testing;
4.2.2 Power Plant Outage/Unserved Energy reconciliation;
4.2.3 Plant site inspection/monitoring of contractual obligations/guarantees;
4.2.4 Fuel Supply Management Agreement curve determination & validation;
4.2.5 Naga Power Plant Complex Warehousing guidelines/procedures;
4.2.6 Fuel receiving, Tank farm, Mooring Facilities & Ash Pond monitoring.
5. To attend meetings/negotiations/re-negotiations and participate/recommend clear-cut decision makings and solutions;
6. To initiate improvements of the Division's business process/cycles;
7. To lead/direct in the monitoring of IPP activities pertaining to the Environmental, Health and Safety compliance in line with the Philippine National Clean Air Act provisions.

Job Position: Principal Engineer A (Supervisor or Section Head)
Work Station: Independent Power Producer Management (IPPCM) - Visayas
NPC, 4th Floor BF Building, N. Escario St.., Cebu City
Work Experience: 2001 – 2004

General Function:

Responsible for the direct efficient supervision towards the implementation of the activities in the contract provisions entered by NPC and to the following Independent Power Producers (IPP), namely: Rehabilitate Operate Manage and Maintain (ROMM) between NPC and Salcon Power Corporation, Power Purchase Agreement (PPA) between NPC and PNOC-EDC, and Energy Conversion Agreement (ECA) between NPC and Toledo Power Corporation (TPC), and PNOC-EDC Steam Sales Contract entered by NPC

ROMM coverage at Naga Power Plant Complex (NPPCx) – Consists of Two Coal Fired Thermal Plants, Two Land Base Gas Turbines, Six Units of Diesel Engines, Plant Wide Water Treatment Station, Fuel Tanks Farm, Coal Yard and Mooring Facilities with total plant combined capacity of 203 Mw.

PPA coverage – Energy Fee accepted by NPC from PNOC-EDC that covers the Nine Geothermal Power Plants built, operate and managed by California Energy Company with total combine capacity of 500MW.

ECA coverage – Energy Fee and Fuel Supply Expenses borne by NPC and TPC to operate and maintain their respective Coal/Bunker Fired Power plants with total combined capacity of 90MW.

Philippine National Oil Company – Energy Development Corp. Steam Sales Contract with NPC's Visayas Leyte and Palimpinon Geothermal Power Plants.

Duties and Responsibilities:

1. To review and validate the SPC's, TPC's and PNOC-EDC's claims based on the respective ROMM, ECA and Power Purchase contract entered by NPC;
2. To lead in the participation/witnessing of the Plant Performance Testing/Instrument Calibration activity that to be conducted by IPP plants through the determination of the contracted Plant Heat Rate, Plant Efficiency and Guaranteed Nominated Capacity/Energy;
3. To direct/supervise the Warehousing and Ash pond maintenance activity at Naga Power Plant Complex;
4. Recommends solution and participate in making clear-cut decision making to NPC top management pertaining to SPC's, TPC's and PNOC-EDC's unresolved issues and claims;
5. To ensure smooth implementation of guiding principles and policies of IPPM –Visayas office business process;
6. To coordinate and extend assistance with IPPCM Fuel section in tackling the main objective of division.
7. To direct/supervise in the conduct of Power Plant Outage/Unserved Energy reconciliation between the IPPs and Transco (as load dispatcher);
8. To direct/supervise the Plant site inspection/monitoring of contractual obligations/guarantees;
9. To prepare/check the IPPCM-Visayas annual budget proposal;
10. To act as Officer-in-Charge of IPPCM division in case the Division Manager is on Travel.

Job Position: Plant Operation Superintendent (Acting Capacity)
Work Station: Leyte Geothermal Power Plant 1, Barangay Lim-ao, Kananga, Leyte
Work Experience: 2 years (1999-2001)

General Function:

Responsible in leading the implementation of policies, guidelines, work procedures which include safety environmental aspects during the shift operation in order to ensure an economic, safe, continuous and reliable generation of electricity for transmission due care to the society.

Duties and Responsibilities:

1. To direct/supervise the shift control engineers, operators and chemical analysts during the shift, as well as to monitor and to conduct trending/root cause analysis of the operating condition of the power plant systems equipment and its auxiliaries, such as:

Total Power Plant Output: 3 x 37.5 MW = 112.5 MW;

Power Plant Systems and Controls:

Turbine system and Controls:
- Main steam turbine impulse/reaction double flow type at rated speed of 3600rpm, output 37.5 MW, steam inlet pressure and temperature of 5.4 kg/sq cm and 160 oC respectively;

Generator system and Controls:
- 3 phase Generator, 60 Hz, Air cooled type with brushless exciter and permanent magnet, output of 37.5MW, 46,875 MVA, 80% Power Factor, rated voltage of 13.8 KV;

Cooling Water System and Controls:
- Direct contact spray type Condenser designed to operate a vacuum of 96mmHg at 100% generator output, with 13,400 cu. m/hr of cooling water and steam flow of 332,860 kg/hr of steam;
- Hotwell Pump with 3 phase induction motor, 60Hz, 590 rpm, 700Kw vertical type designed to pump out 7,500 cu. m/hr of condensate;
- Cooling Tower, double cross, induced type with 150KW/unit, 3 phase induction fan motors, designed to cool 13.91 cu. m/hr of circulating water at 47.9 to 35 degree C with draft and evaporation losses of 0.08% and 2.22% respectively;

Steam Ejection System and Controls:
- Steam Gas Ejector, two stages of four elements each designed with suction pressure of 0.127kg/ sq cm abs., and discharge pressure of 0.40 kg/sq cm abs.;

High/Medium/Low Voltage Systems and Controls:
- Transformer, 3 phase, 60Hz Main Generator, Interconnect, Station, Unit, Service and Auxiliary Power Transformer at 47 MVA, 30 MVA, 7.5 MVA, 4000 KVA, 1500 KVA and 250 KVA respectively;
- Switchyard, Indoor type, 138 KV, with SF-6 gas insulation;

Power Back-up System and Controls:
- Emergency Diesel Engine-Generator, 3 phase, 60 Hz, Tandem Compound Generator, 1200 rpm, 1.33 MW capacity;
- DC systems, industrial battery to back-up the AC system and to supply the DC controls auxiliaries.

Centralized Air-conditioning and Air Dryer System and Control.

Lube oil and main steam admission systems and controls.

2. Responsible for the implementation of the operations system operating procedures in line with ISO 9002 systems elements, Total Quality Management, Manage Maintenance Program, Operation Management Program, which include the Environmental, Health and Safety Management programs;

3. Recommends solution and participate in making clear-cut decision making pertaining to the over all power plant unresolved issues and performance improvement aspects;

4. To prepare management reports, issues memoranda/letters regarding to operational plant and manpower matters;

5. To act as power plant Officer-in-Charge in case the Operation Manager is on Travel.

d variation.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 15512)

Go to Search Parameters...

Brief Description

ISO 9000, ISO 14001, OHSAS 18001, ISO/TS 16949, TQM, SAP R3, FOURTH SHIFT, SPC

over 35 years expierence in piping design; AutoCad, VersaCad, Intergraph 3D piping

Integrity management engineer with world leading expertise

Corrosion and Metallurgy Engineer, Painting and Coating Inspector, Engineer, QA/QC Inspector, Manager

Human factors, human performance, human error, ergonomics, industrial psychology

This is to express my sincere interest to apply to your company as Mechanical/Piping Field Engineer/Supervisor

I strongly beleve that I am a match for the position of Drilling Completion Engineer with any Oil/Gas organization , and that the beneficial will be mutual.

I have over 18 years in experience in the construction,design and administration of large projects.

Experience Environmental engineer in the oil and gas and fertilizer industries in the field of environmental monitoring, auditing, implementation of Environmental Management System ISO 14001, Waste Management

Metallurgical Engineer with almost 20 years experience in Operations, Projects and Management in Milling facilities. Excellent computer, communication and verbal skills. Very proficient in MS Office Software and OSISoft PI software as well as several Enterprise system software packages.

Rotating Equipment, Package Engineer, Water and Waste Water

I am HSEQ professional and want tp work with any multi-national company as HSEQ Professional.

Diplam in civil engineer

I am a Mining Engineer having worked in coal Industry for twenty eight years both in under ground and open cast mines. I have taken training inAustralia on coal technology at University of New Castle. I am ready to face any challenge and prove myselfGiven a chance.

Solid experience in Contracts Management for 18 yeras 9 months in major upstream Oil & Gas Industry in India.. My academic qualification is BE(Electrical) graduated with Honors, in the year 1989 from Govt. Engineering College, Bilaspur (M.P) India..I had the expertise in MS Words, Excel. SAP.

My working career was started from 1988 after pass out Diploma in Electrical Engineering 3 year’s course. I have total 20 years of experience in various fields. I will do all types of maintenance, troubleshooting & commissioning works.

C&I / DCS/Control System/Engineering/Project Management

Electrical and Instrument Project Execution, Installation, Precomm, commissioning and Estimating

+20 years work experience in fire alarm life safety, special hazards and low voltage industry. Bachelor of science in electrical engineering. NICET certified engineering technologist (Level 3 in fire alarm systems).

21 years experience in Drilling Engineering.

With over 30 years experience in the mining industry, I feel that I can bring new ideas to any project. I am very good with people and have no problem working and directing them. Having lead the Expansion Division in Southern Peru Copper Corp, I am confident in my abilities.

Refinery Analyzer Engineer

I could be a valuable asset to your organization because of my vast background in the Oil and Gas industry. I have worked in almost every corner of the industry, from the bottom to the head man, in the field and in the office. I have attended NAIT (Northern Alberta Institute of Technology

Bachelors degree in science,Diploma in industrial safety,Diploma in petroleum refining engineering and 20 years of experience in chemical plant operation

A Certified Human Resources Professional, with practical and progressive experience in all aspects of human capital management; labour relations and negotiations and safety/loss control management in Central Asia, West & East Africa, Central America, Canada, USA, and the Asia-Pacific region.

Over 25 years of various experience in On shore petrochemicals(India), Off shore/on shore oil and Gas field in Dolphin Energy Qatar (A Total + Oxy joint Venture Company), ZADCO,UAE and Gas processing(Qchem –A Chevron group company) complex in Qatar.

27 Years Experience in the Field of Piping Construction and commissioning for Oil & Gas Industry,

20 years of experience in safety profession both in onshore construction and marine construction.

MBA, PHR

Experienced and motivated specialist in the operation of Petrochemical plants(iso propel benzene plant and phenol plant) and gas plant,with extensive experience on plants in Romania and Libya who has developed organizational and co-ordination skills along with management expertise

Construction management, and design of roads, infrastructure, utilities, pad sites, drainage and storm water management facilities.

20 years experience QA/QC SENIOR WELDING INSPECTOR IN petrolium refinery piping &cross country pipelines .having CSWIP-3.2,API-510,PT,MT,RT&UT ASNT LEVEL-2

Varied experience in the Oil and Gas Industry with 22 years in the administartion and management of Contracts in excess of US $1 billion.

Technically competent electrical engineer with chronicled success of over 27 years predominantly in managing installation, commissioning ,operation and maintenance of electrical equipments, networks in various projects including - power generation, desalination, oil & gas production/ process facili

Landman, Title, Leasing, GIS and CAD Experience,

Staff sergeant officer, I'm the head of security in the french embassy in Tunisia. Speak french, english, spanish, and basic arabic. I'm in training course in second of the two years of university degree in management.

As a team member of your organization I can provide: Manage and control operations over all process stages which meet quality and quantity standars set by the company. Develop, manage and control operating and capital budgets to ensure that all expenditures achieve desired and don’t exceed

Mining Engineer Over 21 years of engineering design, research, planning and supervision experience in mining and energy industry.

Experienced on preparing Engineering Design such as FEED preparation package and Detail Design preparation package including procurement and planning support activities and projects involves are TOTAL FPSO, Off- shore Facilities, On- shore gas plant, semi- conductor plant, pharmaceuticals plant.

Experienced engineer-seeking position in management

Power plant operation and maintenace management, power contract performance administration; Quality Management System Representative ISO 9001:2000, EMS 14001:2004, OSHAS 18001:2007

Mech.engineer/18 yrs exp /petrochemical/refinery/power plants (Maintenance/Projects(Piping/pipe line/equipments)/shutdown maintenance)

Over 18 years of drilling and completion experience.

I am an highly skilled and ethical professional seeking employment as a Lease Analyst or Division Order Analyst in any Oil and Gas industy. I have been in the Land dept. in oil and gas since 2005, I have a bachelor's degree in business and currently taking a course in Land Analyst Institute.

I have more than 18 years experience in engineering .I am confident that with my experience in project Design, Planning, Scheduling, I can make a significant contribution to your projects.

Arun - MBA, PMP, BE, Project Controls, Project Services

Extensive hands-on international and United States oil and gas industry experience focused in the full spectrum of Exploitation geology (Development and Production), from mapping and geocellular modeling through prospect generation, operations and reserves reconciliation. TX Lic. #1455

Project Construction Management Professional have built High rise,Low rise,Industrial ,Infrastructrure and hospitality projects

B.Sc Engg(Electrical)+MBA(Finance), 25 exp as electrical engineer in mechanised open cast mines and Power Sub Station wiht excellent performance.

With a PhD in geology, I have 13 years' of mining industry experience, focusing on exploration / development projects and investment opportunities, primarily in the FSU

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out