Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #81880
next resume »»
CONTACT INFORMATION:
View contact information...
PERSONAL PROFILE:
A motivated and experienced OIM/Superintendant/Supervisor, accustomed to tight budgets in an innovative atmosphere. Experienced in organizing, training
National staff to the highest standard of skills, able to communicate in a controlled and flexible manner, either as a team member, or individual basis.
Extensive experience in FPSO operations, conversions, commissioning, safety case, and first oil startups. Currently based and living in Thailand.
Extensive operating experience in Thailand, Vietnam, Australia, and the North
Sea.
EXPERIENCE RECORD
2004-2009 - MODEC-Thailand
Currently OIM on the Jasmine Venture MV 7, operated by Pearl Energy, initially a short field life was anticipated but the field has grown to 5 platforms and a production rate of 25,000 bbls/d and expected field life completion in 2017. Reporting directly to the Operations Manager and responsible for all HSE, Production and Maintenance operations, with responsibility for off take operations that currently are completed once weekly or less, Helicopter operations and in field boat transfers are also under the control of the OIM. Ongoing training of the Thai nationals to Modec FMS standards.
2003-2004 - MODEC-Vietnam
Requested by Modec to move to the MV9 in the South China Sea in the Su Tu Den field operated by Conoco /Phillips, Facility Production Supervisor, responsible for all process related equipment onboard the MV9, training of the Vietnamese nations to take over the process systems controlled by a Siemens DCS PC operating system. Commissioning of the process systems in the yard in Korea, sail out, hook up, commissioning, and first oil. Responsible for the commissioning of the water injection and gas lift systems during the first year of production, the production rate of 80,000 bbls/d at the time of leaving.
Promoted to the post of OIM by Modec management request on the FPSO Jasmine Venture MV7, (Ex Buffalo Venture), at the end of 2004.
2000- 2003- MODEC Australia
Contracted as a third OIM offshore on the Modec Venture 1 in the Timor Sea for operators Conoco/ on the Elang field, this as an extension of my original short contract as Production Superintendent in Jakarta Indonesia. The team consisted of Indonesians, Malaysians, and Australian nations. Also responsible for engineering improvements on the production and related systems and liaising with the Modec head office in Japan.
1999-2000-PERMIER OIL Jakarta
Production Advisor with Premier Oil in Jakarta Indonesia, office based to advise and to coordinate a field s/d to North Sea standards and report to the Operations manager on the operating standards applied in the Premier operated Anoa field, and advise of changes and procedures required to raise the standards required to operate the AGX Anoa gas field for the exporting of gas by pipeline to the Singapore terminal in 2001, the production team consisted of Indonesian nationals with training to North Sea standards.
1998-1999- SBM TII Singapore/Vietnam
Production Superintendent with SBM in Singapore in the Hitachi/Zozen shipyard for the safety case study, refit, commissioning, procedure manual introduction, and sail out of the Rang Dong 1 FPSO to the Rang Dong field operated by JVPC in Vietnam for first oil start up.
Also responsible for the hook up and first oil, liaising with the Rang Dong wellhead platform remotely controlled by the Warner Wright DCS system, crude oil exported to off take crude oil tankers
Liaising directly with the SBM office in Vietnam and the JVPC rep onboard, production team consisted on Pilipino and Vietnamese nationals with ongoing training.
1997-1998-ATLANTIC FLOATING PRODUCTION Ltd
Contracted to Conoco North Sea, on the refitted Semi Submersible Aker A3 floating production facility in the North Sea the Northern Producer, Production Superintendant for the float out and first oil and gas for export to the Tartan platform. Responsible for all production related matters and reporting directly to the OIM and the Aberdeen head office
1993-1997-ATLANTIC POWER AND GAS Ltd Vietnam
Contracted to BHP Petroleum Australia.
Six months in Singapore FELS shipyard and Ho Chi Minh City BHP office to write procedures for the Facility Management System manuals and safety case review.
Production Supervisor on the Dai Hung Field Vietnam on an Aker A3 semi-submersible floating production facility, on location on the Dai Hung field Vietnam supervisor for all process operations, flow lines and pigging operations and wire line operations, reporting directly to the OIM. Supervised the training of Vietnam nations to North Sea standards
I984-1993-ODJFELL DRILLING AND CONSULTING Co UK Ltd Aberdeen Scotland
Contracted to Hamilton Oil Company Ltd, as production supervisor on the Deep Sea Pioneer and located in the Argyll field offshore UK. Supervised hookup and commissioning of first oil, reporting to the OIM of Hamilton Bros, responsible for all subsea completions and wellhead operations and liaising with a permanent onboard diving team, and diving vessel permanently in the field.
1979-1984-OCEAN INCHCAPE Ltd Aberdeen Scotland
On contract to Hamilton Bros Oil and Gas production supervisor on the Transworld 58 Floating Production Facility, responsible for all production related systems, and management of subsea systems, oil exported to a SMB facility and off take tanker, promotion to the position of Production Supervisor in 1981.
1976-1979- EXPRO (NORTH SEA) Aberdeen Scotland
Started my Oil & Gas career as Production Operator on the process systems on the TW 58, and as holiday relief operator on the Montrose, and Thistle North Sea oil platforms.
EDUCATON:
Lothingland Secondary Modern
Lowestoft of Further Education
QUALIFICATIONS:
City and Guilds, in General Engineering, Welding, Turning, Fitting, and Sheet Metal work.
MAJOR COURSES:
LINK Associates International OIM command and control (Perth Australia)
Hick Hargreaves water injection (Bolton UK)
Ruston Turbine (Lincoln UK)
University of Tulsa (NORDAL) Gas Lift (Brighton UK)
LSA Scale in process systems (UK Nuclear group Cumbria)
RGIT Production course (Aberdeen University Scotland)
BARTER IMDG code (Bangkok Thailand)
Quality Management System ISO 9001:2000 Standard (Bangkok Thailand)
TRAINING:
Confined space awareness
LSA scale in water injection systems
Hazard awareness in water injection systems
Wax control and pour point injection in process systems
Train the trainer (Asian cultural awareness)
Gas detection systems
Rohrback Casassco corrosion systems
Accessor competency
HOBBIES/INTERESTS:
Interest in diet and nutrition, keep fit, reading and furthering computer skills
Place of birth: (Norwich UK)
UK Passport: 303927213 (valid May 2015)
UK full driving license (402015 AD9MP12)
Marital status: (Divorced)
References: (available on request)
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 6001 to 6050 of 15477)
Go to Search Parameters...
Brief Description
The computer skills I have apply primarily to Landmark (Unix, SunSolaris, Oracle) and Kingdom (SMT) seismic workstations. I am proficient with most PC applications as well. My work history is stable and I have good references.
Experienced UK qualified accountant. Finance and administration Manager in large construction projects in North Africa employing 1,500 site construction workers.
Over 26 years experience, 16 of which are with major foreign oil companies employment in specialized gas field operations which have included pre-commissioning and commissioning activities in the onshore and offshore Oil and Gas industry.
Seeking a position as a driller where my experience, training, loyalty and good work habits will be an asset to your company. I have over 27 years of oilfield experience offshore and on land with expertise in the following: supervision, operations, trouble shooting, safety and derricks.
to secure a responsible position as an electrical engineer.
Worked ten years in underground coal mine for Peabody coal compny. Was certified electrician from 1974-1984. Worked as a foreman and assistant mine manager.
Naval Architect with 6 years Experience of which 4 years in Indian Navy.
A motivated and experienced OIM/Superintendant/Supervisor, accustomed to tight budgets in an innovative atmosphere.
18 years of experience in respective fields
Senior Electrical Engineer , MEP Manager
15 years of utility/specialty chemical management experience.
. I have strong leadership skills and proven ability to manage and motivate a team to achieve assigned results. Through my previous jobs, I have learnt to provide and maintain consistent high standards and service.
BS Electronics and Communications Engineering, Proficient in Microsoft Office XP (Word, Excel, and PowerPoint), Taken up CCNA Sem 1-4 of CISCO Networking Academy, Knowledgeable in Autocad,
Structural Designer With 9Yrs. PDS,Microstation & Autocad Experience
Mechanical/Construction/Millwright Superintendent
8 yrs exp coal mining; exp in SAP PP, TOC SCM, DuPont Safety; OHSAS
Involved in exploration for precious metals in Archaean and Proterozoic terrains of India, includes Gold, PGE, Ni and basemetals
Work Experience: I have extensive experience in the repair, maintain and rebuild work with the following list of engines, etc. Wartisila (Varsa 32) Ulstein Bergen, (KVG12) Caterpillar, (D379, D398, D399, D3408, D333) Detroit Diesel, (in line 3-71,6-71,V-12) Lister, (2-3-4 Cyl.) EMD, (645s) Cummins
Projects, Design ,maintainance,plc programming,scada
B-tech_Electronocs_MWD/LWD_3 years
Mining geologist
Free!
Well Rounded Mine geologist with experience in Alluvial Diamond Mining and Gold Mining and Exploration
Seeking challenging position in a big drilling fluids and services company where I can contribute to the growth of this company. I will utilize my experience on offshore & onshore drilling operations to further the company mission goals. It is my goal to drill adeepers wells with highest performance
primavera
Safety Health & Environmental Engineer/Consulant/Energy
In this project I was taken three leading telecom companies BSNL, VSNL& MTNL The study of selected telecom companies and its financial performance summarizes conclusions that they achieved effective and efficient financial performance.
B.E/MECH/3YRS/PDMS
Civil engineer with some experience in environmental compliance and regulations
26 Years of Rotating Equipment, Mechanical Engineering Expertise gained in Oil and Gas Field Construction, Operation, Production, Reliability, Installation, Commissioning and Maintenance. Offshore, FPSO, and also Onshore Facilities experience. Rotating Equipment /Maintenance Engineer
Stress Analysis(Caesar-II,Rohr2),Piping Layout(PDMS),Support ,Isometrics,Material specification,Autocad,Microstation
Good knowldege in LNG Regasification and processing, drilling fluids and refinery operations etc. I like to take risks and find appropriate solution to it. This factor encourages to make my career in oil and gas industry. I like to contribute more to the company and scoiety.
As you will note on the enclosed resume, the breadth of my expertise covers a wide area of responsibilities. I have leadership, analytical and team work skill. I am recognized for flexibility, adaptability and for a high degree of expertise in the accounting or finance field.
MECHANICAL ENGINEER in the field of construction
Oil Industry Business Builder
I am a Pro-Engineer Designer with experience up to Wildfire 3.0, Pdmlink 8.0 & 9.0, SAP, and Intralink 3.4.
I am Civil / Structural Engineer with 25 years of experience. Presenly I am working as a Lead Engineer for last 10 years. I work as a hands-on lead and comfortable with checking of calculations, doing schematic design and providing site support.
Meticulous finance professional, current Controller of Mining Operations with twenty-two continuous years of challenging professional experience in the areas of audit, banking, accounting, cost control, budget, financial management and controllership. Hands-on executive.
Civil & Structural & QAQC Construction Superintendent
I am a Piping Engineer experienced in Piping Stress analysis, Complete Piping engineering activities, PDS expertise. I believe that my enclosed resume will demonstrate that I have the characteristics and experience you seek.
Over 14 yr of experience in dealing with Automation, Instrumentation & control systems. 11 years in Project Sales. Working experience with Honeywell & Yokogawa. Presently, located at Doha, Qatar, working with Automation/IT Company.Handling DCS, PLC, FGD System,Field Instruments.
An Electrical Engineer with over 12 years of hands-on experience in Maintenance of Assets and Utilities in a Gas based Petrochemical plant and Integrated Steel Plant with Rich Managerial and technical capabilities in Installation/Commissioning and Upkeep of Electrical Equipments.
Erection, Commissioning & Trouble shooting of Rotary Kilns, Ball Mills, Vertical Roller Mills and Electrostatic Precipitators.
Reservoir engineer Developing, maintaining and implementing integrated field depletion plans with the aim to maximize economic return
Quality Assurance Manager, ISO9001 and AS9100
Professional Geologist with more than 3 years experience in Porphyry Copper-Gold/High-Sulphidation Epithermal Copper-Gold and Epithermal Gold-Base Metal Projects and Prospects in areas of South Cotabato, Surigao del Sur, Davao Oriental and Agusan del Sur, Mindanao; and Negros Oriental, Central Cebu
QA/QC ENGINEER E&I
Sir, I have completed MASTER DEGREE in INDUSTRIAL SAFETY ENGINEERING at MEPCO SCHLENK ENGINEERING COLLEGE at Sivakasi, Tamilnadu in India.Also I appeared POST GRADUATE DIPLOMA in ENVIRONMENTAL MANAGEMENT through distance mode. In addition I completed BACHELOR DEGREE in MECHANICAL ENGINEERING also
Metallurgist with 4 years experience in base metals. Graduated with a Bachelor's Degree in Mineral Process Engineering 1st Class Honors. Enthusiastic and works well in a team or independently
Almost 5 years experience in Engineering and Detailed design, 5 years in field supervision in Oil & Gas, LNG & Petrochemical Plants.
Self motivated individual with the desire to continually increase my knowledge.
First
Prev
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
[ 121 ]
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
Next
Last
Seach Parameters
Goto Advanced Search...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com