Misco Jobs	|  Go to Job Seeker's Center »»   |
	«« previous resume Resume #81884 next resume »» CONTACT INFORMATION: View contact information... SUMMARY OF QUALIFICATIONS: ------------ * Proposal Engineering: Preparing scope of work & man-hour estimation. * FEED / Basic Engineering: Preparing technical specifications & cost estimation, conceptual studies, master plans, preliminary calculations for MTO, value engineering based on various alternatives, work package preparations. * Detailed Engineering: Preparation of design basis, analysis and design of steel and concrete structures, monitoring man-hours, coordination with clients and other disciplines, checking of drawings & calculations, review of vendor & shop drawings, site visits and trouble shooting, attending teleconferences and model reviews with prime office/clients, liaising with client's engineer for approvals and change management. * Project/Construction Management: Site supervision, review of drawings, calculations & method statements, design coordination and value engineering, attending review meetings and reporting, project planning and scheduling, coordination with client's/consultant's/contractor's, certification of bills, quality and safety management, controlling documents and drawings. As a Lead Engineer providing technical guidance for engineering team including mentoring, teaching, and developing the skills of co-workers in the department. OBJECTIVE: ------------ ------------ I am seeking to develop my skills in my next challenge and am very interested in joining the engineering team. WORK EXPERIENCE: ------------ ------------ Project Experience * BANTREL CO. CALGARY a) Project: Suncor Voyager, Utilities (April 2008 till date) I completed Structural Designing of 2 sectors of main Utility Piperacks using Tekla, it was 2 x 20' wide & 60' long and 50' high having 1 piping module (4 level piping) resting on Stick built & 1 electrical module at top. I have been involved in checking the entire foundation design for Utility Piperacks for 60 % model review stress information, I am involved in Structural Design of foundations for Evaporator & Crystallizer unit which include 25 m high crystallizer Unit foundation resting on piles. b)Project: Shell Scotford A& V Unit (Dec 2006 to April 2008) I had designed foundations & superstructure for process structures and equipment foundations. I have completed engineering check of process structures. I also completed review of connection design supplied by Fabricator. Following is a list of Structures/ Equipment I designed: 1) Structure "M":- A two level process structure with dimensions 18 x 6.5 x 8 meters high and containing one module and stick built steel. The structure was analysed & designed using Sframe. Loadings were calculated according to NBCC 95 and the project specifications. Structural design was completed according to CSA S16-94 and CSA A23.3-94. 2) Structure "N":- A 4 level process structure with dimensions 12 x 6.0 x 17 meters high and containing two modules and stick built steel. The structure was analysed & designed using Sframe. Loadings were calculated according to NBCC 95 and the project specifications. Structural design was completed according to CSA S16-94 and CSA A23.3-94. 3) V-41188:- An oily water sump with dimensions 10 x 7.5 x 6 meters deep below ground. Sump also included a steel roof for access. The sump was analysed & designed using finite element method using Sframe. Structural design was completed according to ACI-350. 4) V-41136:- A foundation for Vertical column 90 m high. Foundation size 10x10 m. The Structural design of foundation was performed by FEM. * TEBODIN MIDDLE EAST, Abu Dhabi Company Profile: Tebodin Middle east is the part of Tebodin BV, The Netherlands. The company is mainly involved in Oil & Gas Projects, Infrastructure projects and projects for Abu Dhabi government departments. a)Project: Ruwais Industrial area Service Harbor at Abu-Dhabi, ADNOC Position held: Lead Engineer- Civil/Structural b)Project: Qatar Gas / Ras Gas Common laboratory, QATARGAS, Qatar Position held: Project Engineer - Civil/Structural c)Project: Rehabilitation of R.C. sleepers/ Foundation at Ruwais, TAKREER Position held: Lead Engineer- Civil/Structural * DERBY DESIGNS, Abu Dhabi Company Profile: The Company is a part of M/s Derby Designs, UK. The company is mainly involved in Substations (400kv,132/11kv,33kv & 11kv) and Power Plants Projects for ADWEA (Abu-Dhabi water & electricity authority) in Abu-Dhabi. a)Project: E16-S18 132/11 kV Substations for ADWEA, Hyundai Engg. E16 a multi-storied substation (basement+Gr+4 floors) in Abu-Dhabi city & S-18 substation (basement+Gr.+2 floors) Position held:Lead Engineer- Civil/Structural b)Project: 220/33kv s/s at Bab, Buhasa & Asab for ADWEA, Hyundai Engg. Position held:Lead Engineer- Civil/Structural c)Project: Shweihat Water Transmission Scheme LOT-D at Mussafah, Marubeni-Taisei, Abu-Dhabi. Position held:Engineer- Civil/Structural d)Project:132/11 kV Substation at W 16 for ADWEA, ABB Engg. AUH. Position held:Engineer- Civil/Structural Responsibilities: -Preparation of basic design, selection of foundation by soil investigation report, preparation of design calculation, taking municipality approval for building permit. -Prepared GA & RC detail drawings for main building, transformer bay, auxiliary transformer bay, cable & pipe trenches, capacitor banks and boundary wall. -Attended technical co-ordination meetings with client (ADWEA) & consultant. * BALLAST NEDAM INTERNATIONAL BV, India Company Profile: The Company is an EPC Contractor, head office in Netherlands. It was a consortium with IHI, Japan & Toyo Engg. India Ltd.for the LNG Terminal. Project:Project consists of an LNG Jetty 2.2 km long trestle (1.8 km offshore) & Loading platform, Mooring Dolphin, Breasting Dolphin & walkways and Substations. Position held:Engineer – Field Engineer Civil/Structural My job responsibility included designing permanent & temporary engineering structures & preparation of calculations for the same, which included jetty sub-station, walkways & their supports & platforms etc. Checking of drawings and calculations of temporary structures made by sub-contractor. Involved in planning & scheduling activities, which included daily & weekly progress reports, weekly program and weekly progress meetings. * OMAN METAL INDUSTRIES, Muscat, Sultanate of Oman Company Profile: The Company is a Structural steel contractor. The company is mainly involved in Design, Fabrication & Erection of Power Plants, platforms and Oil & Gas Projects in Muscat. a)Project:Ghubhra Power Plant for WED, Sultanate of Oman Position held:Engineer- Structural b)Project: Al Barka Power and Desalination Plant for A.E.S. Barka SAOG. Position held:Engineer- Structural c)Project: Seeb City Centre for Majid al Futtaim at Muscat Position held:Engineer- Structural Engineering Deliverables: 1. Structural Analysis and Design using software STAAD-Pro 3D Model. 2. Design of Moment Connection & Shear Connection by BS 5950. 3. Checking Shop Drawings. 4. Checking of MTO's made by quantity Surveyor. * STRUCTWEL DESIGNERS & CONSULTANTS PVT LTD, INDIA Company Profile: The Company is Mumbai based private firm providing Engineering Consultancy services in diverse areas such as Oil & Gas Plants, Rehabilitation of structures, Paper and Chemical plants & Multi-storied Buildings. Projects: a) Oil Storage Tank at Mahul Mumbai for Bharat Petroleum Corporation.(BPCL), I b) Expansion of Industrial Plant at Turbhe for Converter Adhesives Ltd, India c) Glen Heights" a 40 storey Residential Bldg. at Powai for Hiranandani Construction Ltd, Mumbai, India. d) Pipe racks & Booster Pump Foundation for IBP (Indo-Burma Petroleum), Mumbai, India Position held: Design Engineer- Civil & Structural * SHAPOORJI PALLONJI CO. LTD, India Company Profile: The Company is EPC contractor, involved in large industrial & residential projects in India as well as Overseas. Project:a) Birla Mandir Project for Vikram Ispat Ltd. Raigad Dist. Maharashtra, India Position held: Site Engineer- Civil EDUCATION & CERTIFICATION: ------------ ------------ 1996 Mumbai University, India Bachelor of Technology (B.E)) - Civil 1991 Mumbai University, India Diploma in Civil Engineering Professional Engineer Provisional License with APEGGA & P.Eng status anticipated by July 2009. ADDITIONAL INFORMATION: ------------ ------------ Personal Information: Permanent Resident of Canada, References will be given upon request, Hobbies: Reading,sports,photography. View contact information... «« previous resume next resume »» Search Results (Resumes 1701 to 1750 of 15497) Go to Search Parameters... Brief Description Joined E & P Company in 1989 and have worked in both onshore and offshore at different positions. As co man supervise operations on Desert Rig deployed for drilling and work over wells. Prior to current assignment worked as co man on jackup rig. Ensure operations are carried out safely & efficiently My various experience in the Safety field has included so far about three years in KCA DEUTAG Drilling GmbH Company drilling company as Rig-site HSE Advisor in Libya,four years position as HSE Coordinator at Drilling Waste Management Company(Tunisian company),Prior to that I was a Chief of District Having substantial knowledge and experience (14 years) in Piping/Mechanical engineering, especially in the Piping Engineering and Design. Involved in industrial plant, petrochemical. Expert in PDMS, including Design, Draft, Isodraft and ability to design and drafting Pipe support using MDS Senior Welding Inspector QA/QC Total experience of 20 years of which 2 years in Overseas as a Process /DCS Plant Operator In various Gas, Refinery, Petrochemicals & Fertilizers Plants. 27 years experience as Drilling supervisor. Under Ground Piping Specialist Engaged for more than 14 yrs in extensive work in the field of piping, structural and welding inspection, supervision of piping, erection, material preparation and scheduling based on the given scope of work. I am a serious minded individual seeking a new environment that has a challenging and rewarding future. I can offer you 29 years of experience in the mining industry (phosphate/open pit). I have obtained my experience from working the ground level up to management. Millwright welding tickets Accomplished petroleum exploration and production manager of people and projects. Proven broad-based experience in multi-disciplinary exploitation of petroleum reserves, evaluation work in acquisition and divestitures, information technology and project management. Twenty-Four years experience in the administration of Oil & Gas property documentation inclusive with, land management, mineral leasing, landman duties encompassing lease conversions, reimbursements, compensations, and shut-in royalties. Serving as a generalist for my first ten years and as a speci Over 13 years experience in positions including Project Engineer, Quality Control Engineer, Civil Engineer, Project Planner and Scheduler, Estimator, Crane Lift Supervisor, Welding Inspector, Land Surveyor and Draftsman. Nine years performance on U.S. Military Construction Programs A Civil/Structural Engineer having 14+ years of Consultancy experience in Structural Design and Project Management for Process, Oil & Gas and Power & Energy Projects. I have good knowledge and experience of Canadian, British, Indian, American & various Process industry standards. Control System engineer with more than 14 years of experience with Yokogawa Systems Engineering Instrumentation & Control Engineering Trainer / Technical Instructors 20 Years plus: Industry sector, Expertise Platform construction, Fitter/Mechanic, Contract Supervisor, Offshore Heath & Safety, Supervisor/Trainer, Drilling Offshore, Rig Mechanic/Chief Mechanic, Drilling Onshore & Offshore. 40 Years Experience - Drilling Sector - Experienced Drilling Consultant / Superintendent, Work-Over/Completion Electrical & Instrumentation Engineer experienced in Testing & Commissioning Instruments in FPSO, Installation of Electrical services in the Power plants (Gas turbine, Hydro, Steam turbine), Commercial Buildings, MRT and Commissioning of Process Control System in Water Treatment Plant. APPLICATION FOR THE POST OF BLASTING AND PAINTING SUPERINTENDENT I have different skills from farming to superivor to general labor skills inthe oil and gas industary.amd also I have some sales experance Worked in Precommissioning,commissioning,start up of Refiner, Petrochemical, GasPlant,worked on DCS system and fields aswell,Fully ocnversant with HSE policies. Undergone training of Fire and Gas. Lead Drilling Fluids Engineer / Mud Engineer / Drilling fluids specilalist/ Mud Manager/Drilling Supervisor/ Drilling Engineer Drilling, Completion Wellsite consultant I am Mech Engg post graduate(Prodn Engg). I have experience in using CAE packages Hypermesh,Ansa and Nastran and performing static ,Normal mode and fatigue analysis 28 years experience with industrial design drafting work. Assignments have involved equipment layouts, P&ID development, material take-offs, estimating, checking and field work in addition to developing construction drawings and fabrication isometrics. Electrical Technician with 20 years experience in the oil and gas industry. Executive Recruiter, Recruiter, Contract Recruiter Over 20 years experience in both Supply and Project Logistics in both Oil and Gas as well as Mining. I also have direct Freight Forwarding experience including multi modal transport involving bulk, express, heavy haulage and over dimensional. Piping Designer (HVAC Piping and Plumbing Systems) am right now working at OXY in Santa Cruz with WO & Completion jobs related.( as a work over site Manager) am interested in your global opportunities so Ihave attached my resume with actual phones and emails.I have experience managing different kind of peoples and oil specialties. been welding for 25 plus years... A total of 10+ years experience in Pipe Stress Engineering and Mechanical Stress Analysis in Good knowledge in delivering commercial operational management including specialist area of hydrocarbon business and regulatory compliance and administration (Production Sharing Contract, Joint Operating Agreement and Gas Sales Purchase Agreement, fiscal terms) My underground mining experience begins from 1986. Over those years I was involved in all aspects of Underground mining. Beginning from manual labor, operating underground machineries, supervising crew, training new operators, to take role as Mine Foreman Electrical Superintendent Graduate in Chemistry with 10 years Cement experience in Chemical Analysis OR a Graduate in Science (Chemistry ) with 14years background in Cement Plant Quality Control procedures. Current position held: Project Exploration Geologist, Reefton Gold Project. Gold exploration 1993 - 1995, 2000 - present. Oil exploration 1996 - 1998 QA Manager with 23+ years diverse experience All STCW certificates are valid and available More than 26 years of experience in this feild and capable of handling induvidual stores Water-flooding, reserve estimation, production forecasting, economic & risk analyses, reservoir characterization, tracer & pressure transient analyses. Well surveillance for development opportunities. Some thermal experience. Simulation experience to predict performance & optimize development plans. 22 Years of experience in Granite and Minerals Industry. Project Head and Managerial cadre experience. Advanced Life Support paramedic whith wide remote medicine experience seeking new employment and challenge Experience LTL Operations Manager looking for the next level Application For Mechanical Inspector/Engineer Over 15 years mining experience in underground hard rock gold mine. Good computer, training and supervisory skills. Having 14 plus years experience in EPC projects in the area of Construction, Process and Equipments, Installation, Commissioning, Preliminary & Detail engineering & Project Management system, in Oil & Gas, Petrochemical, Chemicals sectors, etc. Plumbing contractor and general contractor. Strong technical and practical knowledge of mining and mineral processing. Over 20 year’s industry experience, in large and small mining operations, experiences in hard rock, sand and gravel, limestone, cement rock, and industrial minerals facilities. BS Mining Engineering. First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   [ 35 ]   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last Seach Parameters Goto Advanced Search... Keywords: (e.g. mining engineer) Find results with: ANY of the words ALL of the words WITHOUT the words Frequently Asked Questions What's the most effective way to perform a search? Go to Advanced Search 1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results. 2. Enter one or two of the most important keywords. Click 'Search' and look through results. 3. To search within results add more keywords. How can I find resumes that contain specific exact phrase? To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD". More Frequenly Asked Questions...
Employer's Center » Employers Home » Feedback » Help » Post Jobs » Edit/Delete Jobs » Search Resumes » Resumes By Email » My Account » Log In » Log Out
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com