Resume - CAWI - AWS (MIAMI); Qualifications NDT - SNT-TC-1A :Level II : RT and PT

Misco Jobs

Resume #82027

CONTACT INFORMATION:
View contact information...

QA/QC WELDING & PIPING INSPECTOR
TECHNICIAN IN MECHANICAL ENGINEERING

ID Number: 07530818
Date of Birth: 31-01-1976 – PERU – LIMA
Driver License: A1, Number: S07530818
_____________________________________________________________________

OBJETIVES:
* To offer to the Construction, Refinery (oil and gas), Naval and other enterprises my professional services in the area of inspection and supervision.

PROFESSIONAL PROFILE:

* My responsibility in back works was report is to the QA/QC Manager of the work the all contractors in the field about welding & piping or made the supervision it in the field.
* With more of 09 years old of experience.

* Technician in Mechanical Engineering with specialty in mechanics of production, a graduate of the SENATI private school of technology.
Code: 952100

* II SNT-TC-1A Level, in radiographic interpretation (RT), and inspection of penetrating liquids (PT). NDT (Non-Destructive Testing – ASNT).

* With Certified Associate Welding Inspector – CAWI of the American Welding Society – MIAMI (U.S.A.)

* Membership of AWS (American Welding Society), member code: 561298

* Excellent knowledge of such internationals Standard as: API 1104; API 650; ASME IX (Welders Qualifications) ASME B31.3; ASME B31.8; ASME B31.4; AWS D1.1; AWS D1.6.

* From the beginning of my technical career in Mechanical Engineering, I was focused on the process of strengthening my knowledge in this area, taking the responsibility of formulating different tasks within the mechanical engineering.

* I have completed the tasksde Cobre) of Non-destructive testing and Inspection of welding & Piping within the Sulphide Primary Project – Cerro Verde Mine (planta concentradora de Cobre), and checking all areas; the NDT, carrying out the tasks mentioned above in FLUOR DANIEL (VANCOUVER SUCURSAL); I have been undertaking them from the very beginning to the end; I was working as the QA Welding & piping during 02 years old of the begin the construction to the production of cooper concentrate.

* I have completed the tasks of Non-destructive testing and Inspection of weld within the Camisea Project (pipeline of gas and petroleum), in the Quality area, carrying out the tasks mentioned above in the TECHINT y TGP enterprise; I have been undertaking them from the very beginning to the end; I was working as the Inspector of Weld in the Coast Base for the Techint SAC enterprise.

* With the Experience in working in both rural and urban areas.

PROFESSIONAL EXPERIENCE:

PSI PERU SAC – Pipeline ANTAMINA
* Supervisión, inspection and repair of external coating tricapa (3LPE), line exiting (08.625" diameter) del mineroducto antamina.
* This pipeline was damage the external coating during the Works of Translei contractor; they made the procedure of repair, this material to repair was made REYCHEM COVALENCE, after it antamina made pass the Holiday Detector.
* Check the piping support (Desing)

Enero 2009 – Marzo 2009.

PSI PERU S.AC.
Proyecto de Relocación del Mineroducto
Antamina Mine, Huaraz - Peru

Inspection of Weld and verification of WPS, PQR and qualification of weld in different posts (depending on the work that had been carried out and the used codes)
Inspection of the works of welding in the pipeline of Carbon steel (minero-ducto) the process of welding was SMAW.
Inspection of the works of termo-fusion to the pipe HDPE (minero-ducto) that after was putted inside the pipe of Carbon Steel, the inspection of NDT was made to according the Code ASTM D2657.
The quality of WELD AND PIPES during the whole Project and the inspection of NDT (Non-Destructive Testing):

o Radiographic Testing made to the all welds joints of the pipeline, and the inspection were to 100%.
o Liquid Penetrant test made to the all weld joints (weldoltes with pipe), the inspections were to 100%.
Verification of the DOSSIERS: construction pipeline, such as the line of HPDE conduit fiber optic.
Febrary 2008 to December 2008

PSI – JRI Peru
Pipeline Tailing System Project – Atacocha Mine, Cerro de Pasco
Peru
Fabricator of Structural Welding in the Pump Station – Atacocha Mine

Inspection of Weld and verification of WPS, PQR and qualification of weld in different posts (depending on the work that had been carried out and the used Code: ASME B31.11; API 1104; AWS D1.1).
Guarantee of the quality of WELD AND PIPES during the whole Project and the inspection of END.
Inspection of the works of welding in the pipeline of Carbon steel (tailling) the process of welding was SMAW.
Inspection of the works of termo-fusion to the pipe HDPE (minero-ducto) that after was putted inside the pipe of Carbon Steel, the inspection of NDT was made to according the Code ASTM D2657.
Guarantee of the quality of WELD AND PIPES during the whole Project and the inspection of NDT (Non-Destructive Testing):
o Radiographic Testing made to the all welds joints of the pipeline, and the inspection were to 50%.
o Liquid Penetrant test made to the all weld joints (weldoltes with pipe), the inspections were to 100%.
o Ultrasonic Testing was made to 100% of the pipeline.
Checking the inspection QA and after Dossier of quality of the contractor that made the construction with the name CEMPROTECH; they made the construction of pipe inside the pump station and construction tanks.

Made the Audit Quality to CEMPROTECH Company, made in the department of engineering and checking the draw and AS-BUILT to the project
Audit to the quality department, checking the pack of quality during the works of welding and check the report in the field and procedure made to the project.
Inspection of the spool in CHILE (Santiago)
by PSI to the contractor ACOTEC
Spools to the Pumps Station – Atacocha Mine
1. Spools with rubber lining inside that it
2. Spools with polyurethane inside that it.
3. Spools Bares
Check the spools - QA PSI, verifying the documents of Quality department for example: procedure of quality, WPS, PQR; welding reports; dimensional reports; radiographic test reports; check the x-rays films made to the spools (the x-rays were 100% of the all welds joints); procedures of rubber lining inside the spools and procedure with polyurethane inside the spools; procedure of paint to the spools.
Applicable norms: ASME 31.11; API 1104; API 650.
From May 2007 to January 2008

FLUOR DANIEL SUC. DEL PERÚ
The Primary sulfides Project – the Cerro verde Mine, Arequipa
Inspection of Weld and verification of WPS, PQR and qualification of weld in different posts (depending on the work that had been carried out and the used Code)
Guarantee of the quality of WELD AND PIPES during the whole Project and the inspection of NDT (Non-Destructive Testing), Radiographic testing, Ultrasonic Testing, dry testing, also supervision of HDPE, including different diameters, such as 48"Ø; 20"Ø; 24" etc., and revision of UT-TOFD analysis reports, which has been realized within the project.
Tasks of the inspection of the equipment in the Primary Crushing, the Secondary Crushing and Tertiary Crushing, Mills, equipment of the flotation area, milling and the molybdenum plant
Inspection of the different lines of pipes according to P&ID (pipes and diagram of instrumentation), and Isometric issues, in order to verify the valves of the floodgate blockade and the others or measurers ebb tide, etc, in the different areas which has been mentioned above
Inspection of the construction of the tanks for the system of the distribution of fresh water fresh for the Project, which has been realized according to the Code: API 650
Verification of the DOSSIERS of the different lines of the processes, such as the lines of pipes conducting fresh water, the lines of pipes within fire hydrants, the lines of pipes conducting air, the lines of sewers and drains
Applicable Codes: ASME 31.3; ASME B31.4; API 1104; API 650.
From October 2005 to February 2007

Bureau Veritas (SPECPRO)
QUALITY ASSURANCE - Fluor Daniel (Mecanical Part)
The Primary sulfides Project – the Cerro verde Mine, Arequipa
Inspection of Weld and verification of WPS, PQR and qualification of weld in different posts (depending on the work that had been carried out and the used norm)
Guarantee of the quality of WELD AND PIPES during the whole Project and the inspection of NDT (Non-Destructive Testing), radiographic testing to the pipe of carbon steel, also supervision of HDPE, including different diameters, such as 48"Ø; 20"Ø; 24" etc., and revision of UT-TOFD analysis reports, which has been realized within the project
Applicable Code: ASME 31.3; ASME B31.4; API 1104; API 650.
July 2005 – October 2005

INGECONTROL - Contractor by GyM.
The Primary sulfides Project – the Cerro Verde Mine, Arequipa
Inspection of WELD for pipes and non-destructive testing by radiographic testing (RT) and Penetrant Testing (PT), verification and examination of radiography films 12" Ø y 24" Ø SCH 40, to the pipe of carbon steel
Applicable Code: API 1104.
January 2005 – July 2005

SPECPRO (Bureau Veritas).
Inspector of the area of WELD and Non-destructive testing by RT and PT, MT, UT (Haz Normal),
Inspection of the following tasks:
Inspection of the mills, traveling crane, heavy machinery, valves of miner among others.
DOE RUN, inspection of Cranes Bridge and mechanical pieces of heavy machinery.
SOTHERN PERU-ENERSUR -ILO Works of UT – Haz angular, which has been carried out by DRUM (longitudinal weld) and control of the steam kettle in the internal part. Inspection of kettles acuotubulares UT Normal (the Hogar zone, primary and secondary coils, drums – both superior and inferior)
PETROPERU (Iquitos – Ventanilla – Talara), inspection of the division tower, kettles of steam and tanks of carbon steel
SLAMBERGER – IQUITOS, inspection and verification of the mechanical part and weld of the Cranes bridge and tecles of lift, tests of the penetrating dyes that has been carried out, radiography. The support in the process of preparing the metalographic copies of the pipes, the ALICORP – CALLAO company.
Applicable Codes: ASME 31.3; ASME B31.4; API 1104; API 650. etc.
January 2000 – August 2002

LA PAMPILLA REFINERY–UDP II REPSOL CORP.
(Through BUREAU VERITAS).
The tasks of supervision de werd and END for the REPSOL CORP
Also, the tasks referred to the ultrasound and such equipment as:
Heat exchangers, drums.
July 2004 – January 2005

INGECONTROL - TECHINT – THE CAMISEA PROJECT
Supervision of: RT and UT in Non-destructive testings, which has been supervising by TECHINT and TGP, developed in the line of Ø 14 inches and Ø 24 inches developed from Malvinas (Cuzco) to the Lurin factory (City Gate-Lima), the lines conducting gas and poli-ducto. 740 Km.
Applicable Code API 1104
The Job of Welding Inspector carried out during the time which has been required, the tasks of radiography and UT in the Coast section for the TECHINT enterprise in the line of Ø 18 inches during the time of the closings of pipes. Supervision of the line of Ø 8 inches located from the area of Humay (Ica) to the division plant in Pisco – The Lobería Plant, the longitude of the line is 40 Km (for the Graña y Montero Enterprise). Supervision and evaluation of radiography in the Humay Station (called by PLUSPETROL Km.0) and the Lobería station (called by PLUSPETROL Km.40) referring to the lines of Ø 1", Ø 2", Ø3", Ø4", Ø6", Ø8". According the Code: ASME B 31.3; API 1104
August 2002 – July 2004
QAULITY ASSURANCE CORP.
The Metrology Inspector
The tasks carried out in the laboratory of metrology, which included hiring of the equipment and instruments of measurement; both referred to the chemical industry and the others.
September 1999 – January 2000

FORMACIÓN ACADEMINA:

- Level of grade: SUPERIOR
- Superior School: Escuela Superior Privada de Tecnología
SENATI.
- Carrer: TÉCNICO EN INGENIERÍA MECÁNICA.
- Elementary School: C.E.P. Santa Teresa – "Chincha" – ICA
- High School: C.E.N. John F. Kennedy
"Chincha"

OTHER SPECIALITIES:
o Office o AUTOCAD (SENATI)
o Solidwork 2003
o Process Technologies of Welding (SENATI).
o Electrical welding, autogen, MIG/MAG, TIG. (SENATI)

COURSE AND SEMINARIES:

- Seminar CWI (Certified Welding Inspector)
Florida. MIAMI – USA.
October 2008

- Seminar and exam to Level II:
Radiographic Testing (RT)
Liquid penetrant testing (PT)
Expositor: Arturo Hernández y Nivel III de la ASNT – TC-1A,
Certf. N° 97444
August 2007.

- Centro Superior de Estudios Nucleares (CSEN) -Lima
Curso de Actualización en Gammagrafía Industrial
Licencia Individual N° 302/2004
Emitido el 09 de Agosto del 2004

Languages:
– Instituto Cultural Peruano Norteamericano ICPNA (Lima)
Intermediate level: Code L9905003280

PERSONAL REFERRENCES:

Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8851 to 8900 of 15497)

Go to Search Parameters...

Brief Description

Highly skilled carpenter 17 years experience. Related work includes structural steel erection, connecting and rigging. Poured concrete, scaffold set up and tear down, foreman for residential housing from framing to finish carpentry.

40 years of underground mining experinece in all phases of mine development. I've supervised crews of 20 or more miners and operators, and have experience in the operation of underground haulage equipment, shaft sinking equipment and drilling/blasting equipment such as jumbos and jacklegs

Management of QA (Quality Assurance), Planning, Scheduling & Project Control

Chemical Engineer, Drilling Fluids Engineer, Process Engineer

An accomplished Environmental Consultant with strong planning and operational experience coupled with an excellent academic background. Strong interpersonal, problem solving and client handling skills, keen to develop skills further in a new and challenging role.

2 Years of Experience, Heavy Equipment Certified, CDL CLass A, OSHA 10HR/30HR, COnstruction Management Degree in progress

Irish Australian coal mining operator, excavator upto 400 tonne, haul truck , water cart etc.

Procurement specialist with supply chain experience. I am versatile, bilingual(spanish),proven difference maker and leader.

Cost/Budget Controls Manager

Proficient in Integraph Plant Design System (3D PDS) and its software including Piping Designer, Equipment Modeling, Microstation, AutoCAD, SPR (Smart Plant Review), Batch Manager, Isometric Extraction and knowledge in Microsoft Windows.

I have completed my diploma & degree. I have completed my NDT ASNT Level 2, I have more than 5 years experienced in the field of NDT technician.

DRAUGHTSMAN/QUANTITY SURVEYOR with 5 years exp. 3 years in Burj Dubai Tower with Diploma in Civil Engineering

Troubleshooting Specialist with years of experience in installation, commissioning, regulatory documentation, project management, high-profile customer services, and a proven background in all aspects of electronics and control systems.

Journeyman Ironworker with exsperience in boilermaker, pipefitter work

Instrumentation Graduate with hands on exposure in PLC programming and commisioning of PLC based Systems espescially,GE Fanuc,AllenBradelly,Beckener & Rainer (B&R).Hands on experience in Yokogawa DCS-CS 3000,System Engineering.

Having three years of experience in the field of process engineering, B.E, Chemical

Responsible for actively involvement in the pre-commissioning and commissioning of the worlds largest natural gas plant

Autocad draughtsman 19 years mainly civil/structural experience

As Instrumentation Inspector/supervisor fully involved in construction,precommissioning,commissioning,start-up activities

Bachelors degree in Chemical Engineering with Minerals Engineering, 4 years experience with a global mineral processing company.

Electronics security engineer

I have 13 years of oilfield experience as an operator of numerous gas and oil production facilities. I am an innovative thinker with a demonstrated ability to improve production and decrease down time very adaptable to changing projects and work schedules and have a proven ability .

Energetic, sincere and trustworthy

Master Technician (Mechanical)

Corrosion, Lab, Chemist, Oil & Gas

I have done my Bachelor’s Degree in Mechanical Engineering in Bharath Niketan Engg. College,anna university. The page following below contains my detail profile and responsibilities I can handle efficiently in your esteemed organization.

Application For The Post Of Offshore Medic

I am formerly a Sr. Maintenance Engineer responsible for the Maintenance and Project implementation of several Petro Chemical Plants. My responsibilities included supervising anywhere fro 10 to 200 mechanics at any on time. I was also resposible for budget up to 7million US.

CAWI - AWS (MIAMI); Qualifications NDT - SNT-TC-1A :Level II : RT and PT

I am willing to gain the experiences and applied the knowledges learned at the school. I am interested to do job related in engineering field.

Skills Experience in Oil & Gas Industries & offshore oilfield.

An engineer from evergreen branch (Mechanical Engineering) ready to put the optimum use of my knowledge in any desire discipline.

Prefer well completion, wireline, drilling engineer

Autocad, Pro-e

Seeking a challenging career in leading Petroleum Company as a petroleum engineer, that ýmatches my field of interest in Petroleum Engineering, where my abilities and skills ýcan be developed and knowledge can be applied.

Work as apipe fitter for 6 years.my last work location was in new calidonia,austria for bieng finish contract

An engineering post-graduate with specialization in environmental engineering. Overall work experience of more than 14 years with majority in Petrochemical.Career Objective-To excel in the field of Industrial Environmental Management by virtue of knowledge, team work and self motivation.

In-depth knowledge of related course work and work experience in Civil Engineering Firm. Worked as Design Engineer in private consultancy firm from May’03 to June’04. Working as an Associate Design Officer with Patni Computer Systems since Feb’06 till date.

3 years diploma in electrical engineering. Skills: involved in commissioning & maintenance of electrical equipment in upstream oil & gas /petrochemical industries.

Having Eight Years Experience in the field of Civil Construction of Tank Farms, Roads, Control Buildings, Valve Stations, Pipe Racks, Pipe-way Sleepers, Paving, Sulphur Silos, Furnaces, Boilers, Conveyors, Flare Tower, Heavy Vessel Foundations in Power and Desalination Plant, Chemical Plant, Public

Proficient in Excel and in Word. Proficient in Primavera Project Planning software.

Adaptable, Enthusiastic, seeks work in Aberdeen or UK.

A graduate of University of Port Harcourt, Faculty of Science, Department Of Geology (Bs.c Geology) Rivers State, Nigeria. Working currently as a contract staff with Shell Petroleum Development Company Nigeria Ltd.

B.Eng. Electrical Electronics. CCNA-Abuja,Nigeria. IEEE-USA Member, Networking Telephony/Data, MicroSoftExcel etc, Travelling & Visiting New places

Landman

Knowledge of Ms-Dos ,use of SQL ,use of linux operating system ,use of Oracle on window Analytical skill and problem solving with creativity,

Engineering skills, AutoCad, MS Word

Petroleum and gas engineer.

Recent University of Texas Graduate. Economics/Business Degree.

Mechanical, Estimate/proposal engineer

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 [ 178 ] 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out