Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #82059
next resume »»
CONTACT INFORMATION:
View contact information...
DIAGEO Plc, Plainfield, Illinois April 07 - Present
Corporate Engineering Manager
Provide process and utility project management solutions for multiple distillation and packaging sites across North America
Managed a $3,500,000 bulk storage project
Managed a $3,000,000 process improvement project which resulted in approximately $4,000,000 dollars in annual COGS savings
Managed a $2,000,000 process improvement project which improved liquid blending production by at least 10%
Managed a $750,000 ingredient rail receiving project which reduced COGS by $1,000,000
Managed a $3,500,000 distillery storage tank replacement project
Led corporate initiatives to reduce greenhouse gas emissions, improve water efficiency and eliminate waste to landfill in North American manufacturing facilities. This included:
Develop engineered solutions for boiler efficiency upgrades, improvement in compressed energy use and reduction in process chilling requirements
Develop engineered solutions for improving water use through reusing, recycling and reducing plant water
Develop processes to eliminate packaging waste to landfill
MILLER BREWING, Milwaukee, Wisconsin December 06 – April 07
Packaging Project Manager
Provide packaging project management solutions to manufacturing department including glass and packaging material waste reduction programs
INDEPENDENT CONTRACTOR AND CONSULTANT January 04 – December 06
Project Manager
Provide process engineering and project management services to clients
Manage multiple food processing projects ranging in value from $100,000 to $3,000,000.
Develop process methods that improved, production uptime, water usage and energy savings
GERBER PRODUCTS CO., Fremont, Michigan July 02 – January 04
Senior Project Engineer
Managed plant manufacturing and utility projects having a capital value up to $1,000,000,
Delivered annual savings of up to $200,000 in utility and energy costs
Provided project-engineering support for $30,000,000 aseptic production line
Developed long range cost reduction strategies with potential for annual savings of $1,000,000 in manufacturing, maintenance and utility budgets
PASCO BEVERAGE CO., (Formerly McCain Citrus), Chicago, Illinois May 99 – May 02
Corporate Project Engineer
Managed manufacturing and utility projects having a capital value up to $500,000,
Delivered annual savings of up to $100,000 in production costs
Managed a project that increased blending capacity by 200% and reduced downtime by 15%
Performed engineering audits, developed process and packaging improvement strategies and managed cost savings projects for three packaging facilities
KIKKOMAN FOODS, Walworth, Wisconsin May 98 – May 99
Plant Mechanical Engineer
Managed manufacturing and utility projects having a capital value up to $750,000
Delivered annual savings of up to $150,000 in production and utility costs
SERVICEMASTER INC., Downers Grove, Illinois April 96 – May 98
Facility Operations Support Engineer
Developed and implemented multiple facility operating programs
Performed feasibility studies and economic analysis of plant maintenance and facility operations budgets to determine potential for cost and efficiency improvement
TETRA PAK ENGINEERING, Pleasant Prairie, Wisconsin May 93 – April 96
Process Engineer
Managed the design, construction and start up of a $3 million hot fill beverage facility
Performed process engineering, construction management and start up functions for
$2 million aseptic beverage process system
Managed the design, construction and start up of a $1.5 million aseptic technology center
THE NUTRASWEET COMPANY, Mt. Prospect, Illinois August 88 – May 93
Development Engineer
Supervised pilot plant operations team consisting of 8 technicians on 2 shifts
Performed economic evaluation and scale up strategies of pilot scale process systems
Managed facility expansion project which increased pilot plant production by over 50%
EDUCATION
BS, Mechanical Engineering, Illinois Institute of Technology, Chicago, Illinois
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 1401 to 1450 of 15434)
Go to Search Parameters...
Brief Description
I am a Kentucky certified miner, mine foreman, electrician and electrical instructor.
Currently I am Mechanical Technician in the oilfields in Sudan also have many years of experience as maintenance supervisor.
Electroplating and running chemical an run test on them and check qc on parts
PDMS Structural Designer Offshore Experience
CFS-CV
NDT level III, Senior certified welding inspector, experienced in most industries
I am a traveling supt. looking for someone to utilize my skills. I am an excellent problem solver and work well under pressure.
I worked in Aker Shipyards Braila in Hull Design Department as ship designer. I was involved in several projects on making of hull structure drawings, workshop drawings, lines faring for different types of maritime vessels built in shipyards: cargo vessels, supply vessels, RO-RO, container vessels,
Free!
20 years experience in Control Systems design and drafting. Industries include: Refining, Petrochemicals, Pharmaceuticals, and Brewery. Working knowledge of AutoCad MicroStation, Microsoft Excel & Access, PDS modeling, SmartPlant P&ID, SmartPlant Instrumentation (INtools) and SmartPlant 3D.
Hungarian chief rig mechanic with 30 years experience
Dynamic, energetic, results oriented, Geologist/Technologist with extensive supervisory and field experience seeks a technical/management position in a progressive thinking mineral resources organization.
My career objective is to become an integral part of a team involved in oil and gas exploration where I can use my problem solving skills and creative abilities to meet challenges and contribute to a dynamic organization.
Results oriented engineering professional with 20 years experience in project management, process engineering, and facility engineering
Experienced Materials coordinator
HSE manager . qualfication . diploma of HSE engineer , osha qualified
A diversified and experienced individual seeking opportunity in mechanical engineering / management support or related field.
Planning of all the activities of Major and Minor inspection of conventional steam turbine of various capacities from shut down to start up and over speed testing.
development of process flow diagram (PFD) and P&IDs, equipment sizing & preparation of datasheet, heat and material balance, simulation on HYSYS, process improvement, Hazop Reviews, line hydraulics, debottleknecking to improve plant performance, commissioning and pre-commissioning activities.
Honest, hard working, tenacious employee
Experienced Manager, and an effective leader with excellent interpersonal skills and flair for creativity, with the ability to work to strict deadlines. Adaptable, good sense of humour that enjoys a challenge and enhancing peoples potential using communication skills at all levels.
Fabrication , construction , in-service inspection , repair, alteration and rating activities for pressure vessels , pressure relieving devices , steel storage tanks built to API 510, ASME section VIII div 1,
Over 13 yrs exp in OD/HR/OB engagements, executive coaching/mentoring, leadership development. currently working as Principal consultant with Infosys leadership system, Infosys tech ltd (Nasdaq:INFY).
B.E.-Chemical with 9 years of Commissioning and Operation Experience in Ammonia Plants; 6 years of Project Management experience & 4 years of Process Engineering experience in Fertiliser Project
Directing Large Engineering Teams.
PLAN SUPERINTENDENT,PLANT MANAGER.SHUTDOWN MANAGER,MAINTENANCESUPRINTENDENT.TECHNICAL CONSULTANT.COMMISSIONG ENGINEER
VERY GOOD EXPERIENCED IN CIVIL ENGINEERING AND CONSTRUCTION PROJECTS SUCH AS CONSTRUCTION OF BUILDINGS, ROADS, HOUSES AND HOSPITALS.
Highly experienced in project engineering management
I have experiences in Oil and Gas International Company in Exploration, Development and Cross Function Team Departments for 26 years in Indonesia with the latest position is Geoscience Analyst. I am expert on DAta base Administrator for Well dar, seismic and petrolog data
Document Controller,Scheduler (Primavera P3), Programmer (FoxPro), Administrative Assistant
Project Management Professional - 16Years of Experience (including overseas) in..,
Diploma In Civil Structural Engineering, Designer, Detail Engineering, FEED,Oil and Gas, EPC, PDMS, PDMS DRAFT, ACAD, Microstation, Review Reality, Terramodel, Windows (MS word, MS Excel & MS PowerPoint) on Windows NT & 2000 Novell environment
16 years extensive experience in the field of Health, Safety and Environment (HSE) in multi-discipline heavy construction projects covering site management, planning, training and developing all aspects of accident prevention. Manage HSE program while ensuring compliance with all government reg
Instrumentation, Qualification: ITI& Diploma Instrument & control
Passed in diploma instrument & conrtol skills in dcs system and manage/conrol our staff
Core Negotiator & Timely & Quality Conscious Buyer
Casing Vibration monitoring and spectrum analysis of Rotating equipment by using data collector & analyzer (SKF Microlog CMVA60) and data manager (SKF PRISM4 1.35 / SKF Machine Analyst 2.2)
Process Engineer with 19 years experience on which 12 years of Project Engineering, and Commissioning in international team environment.
Lead the Project in Oil and Gas in different companies namely CB &I, Ajman, Maersk Oil Qatar, Kvaerner Powergas Mumbai, Tecnimont ICB Mumbai etc.
Over Eleven (11) years of extensive experiences in the field of Planning/Scheduling Engineer of various projects. Similar to Oil & Gas Refinery, Chemical Plant, Oil & Gas Exploration & Production Onshore/Offshore, Power Plant, Transmission Line and Desalination Plant in Russia, Vietnam, Kuwait, Ch
I am a railway track engineer past 25 years in INDIA, MALAYSIA,DUBAI METRO PROJECT.
A reliable, enthusiastic administrative assistant with diverse experience, a strong work ethic and excellent attitude. Personable, diplomatic, flexible and adaptable team-player. Professional deportment and discrete. Self-motivated and willing to learn.
ASNT NDT LEVEL-III +CSWP+ISO LA+RSO
Extensive Operation experience in different petrochemical industries.
OSHA 30 - WCS Well Control School
Sr. Electrical Designer with AutoCAD background & some Microstation experience.
I am an experienced and qualified supervisor/manager with long term knowledge of the Manufacturing of construction Materials.
Worked in the oilfield for 28 years a very dedicated person and reliable,truthful, teamplayer, think safety.
A result oriented professional with 11 years experience of quality control, Quality inspection Management,NDT-inspection and CAWI-certificate holder
26 years of mechanic/welding background, Certified welder, 21 years Army SFC/E-7 retired
Security Manger with hands on experience
First
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
[ 29 ]
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Next
Last
Seach Parameters
Goto Advanced Search...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com