Resume - Process Engineer Resume Oil and gas

Misco Jobs

Resume #82284

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
* To gain employment in a company where accumulated knowledge and experience can be applied to sustain individual growth at the same time contribute to the growth of the company.

SUMMARY OF QUALIFICATION:
* 13 years of experience in engineering design environment with ability to work under pressure in coping with client job requirement.
* Effective in analyzing job flow system and finding solutions for efficient and reduced man-hour consumption.
* Exposure to different culture abroad gained from overseas assignments.
* Flexibility in terms of job requirement and can perform multi tasking activities.

PROFESSIONAL EXPERIENCE:
SHI Designing and Manufacturing, Inc.
(A subsidiary of Sumitomo Heavy Industries, Ltd. Japan)
32nd Floor Raffles Corporate Center Emerald Avenue Ortigas Center Pasig City, Philippines
2007 – Present Deputy Section Head of Process Equipment Section
* Managed project and organize job flow.
* Perform the overflow jobs of section head such as section workload monitoring and manpower distribution.
* Oversee performance of subordinate and develop measures for quality improvement.
2004 – 2007 Senior Engineer
* Project Head for Pressure vessel detail design such as Distillation Tower, Evaporator, Heat Exchanger.
* Coordinate with client and assure that proper specifications were integrated with job output.
* Facilitate training for young engineers.
* Overseas assignment in Sumitomo Plant Engineering (SPE), Tokyo Japan and SHI Pressure Vessel Engineering Section, Saijo Japan for project implementation and coordination.
* Assigned in Sumitomo's Coke Drum Fabrication Plant in Saijo Japan and used Finite Element Analysis method for Stress Analysis of Coke Drums – FEMAP with NX Nastran.
1998 – 2004 Process Engineer/Programmer
* Work as Design Engineer and make computational analysis for industrial processes.
* Perform Process Simulation using Software such as ASPEN and PRO/II in optimizing processes and sizing up equipment for chemical, petroleum and natural gas application.
* Develop Automation Program using Visual Basic for Basic calculations and automatic generation of Detail drawing for Tower Internals and Heat Exchangers.
* Develop calculation flow sheets for Distillation Tower sizing, Material balances, Component physical properties, VLE equations using macros.
* Initiated and developed new type of Internals such as Distributors, conduct equipment testing, until it was patented, and consequently applied in the industry.
* Assigned in Sumitomo Heavy Industries (SHI), Nishi Tokyo and Oosaki Japan office for technical support and project implementation.
May 1996 – May 1998 Junior Engineer
* Secondment to Sumitomo Heavy Industries Tokyo, Japan under Heat and Mass transfer Division for training in Basic design of Distillation practices.
* Trained under Association of Overseas Technical Scholarship (AOTS) Nagoya, Japan – Training organization under jurisdiction of Japanese Ministry of Economy, Trade and Industry that promotes Training activities in Japan focusing on Engineers.
* Work as Engineer Detailer in Process Equipment Section SDMI, Manila which makes fabrication drawings of tanks, heat exchangers, distillation towers, extraction towers and column internals.
* Work as Engineer Detailer in Machinery section of SDMI, Manila which makes fabrication drawings of moving mechanical parts.

GOMECO Metal Corporation, Rincon Valenzuela Metro Manila
Nov 1995 – May 1996 Field Engineer
* Supervise on-site installation of food processing equipment for commercial establishment.
* Coordination with client for equipment specification and secure compliance check at fabrication yard.

SKILLS:
* Knowledgeable in CAD software such as Auto Cad and Micro Cadam
* Knowledgeable in Process Simulation Software such as ASPEN Plus-Aspen Technology, PRO/II-Simulation Science Inc., DESIGN II-Winsim Inc.
* Proficient in MS Office, Visual Basic Application, Visual Basic programming
* Exposed to SULZER Chemtech (Switzerland ) standards particularly Distillation processes and Column Internals
* Stress Analysis Software FEMAP with NX Nastran 9.3.1

EDUCATION:
Bulacan State University - Malolos City, Philippines
B.S. Mechanical Engineering
Registered Mechanical Engineer PRC License No. 0048868

Major Educational Honors:
Consistent Scholarship grant Bulacan State University Malolos City 1990 - 1995
High School Class Valedictorian Our Lady of Perpetual Help Institute Cruz Guiguinto, Bulacan 1986 - 1990
Elementary Class Valedictorian Guiguinto Central School Poblacion Guiguinto, Bulacan 1980 - 1986

PERSONAL DATA:

* Age: 35
* Date of Birth: September 18, 1973
* Sex: Male
* Civil Status: Married
* Language Spoken: Pilipino, English, Nihongo

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1951 to 2000 of 15508)

Go to Search Parameters...

Brief Description

QA/QC ENGINEER

An experience individual with excellent knowledge of Sales/Marketing, Freight handling, Imports/ Exports Management with the objective of achieving organizational goals and making it a strong profit center seeks an opportunity in managerial capacity

I offer a broad range of upstream petroleum business skills and leadership experience covering exploration/development planning and LNG project execution, subsurface and production facilities planning, economic analysis, strategic planning, commercial/legal negotiations and corporate communications.

Five tears of experience in the field of industrial environmental monitoring specially related to petroleum and petrochemical complexes.I have sound knowledge of US EPA regulation. I can also design air air polltion control systems.

Senior Project Manager, International Industrial Multi-Disciplinary &Muli-Cultural Projects

I am having vast experience (22 Years) in Maintenance & Projects and in diverse fields. I am suitably qualified (BE, ME, PGDM, PGDIT) to take up any challenging assignments across the globe.

Negotiations, planning, economics in international joint venture gas and midstream projects for past 14+ years. Started career as reservoir engineer with Exxon.

Trade and degree qualified welding engineer and m,etallurgist with 25+ years experience in petrochem, power, onshore rig contruction and computerised welding documentation management.

M.Sc Applied Geology. M.Tech Min Expln,PG Dip In Envt Mgmt & PGDip In Env Scs, 22 years of experience in govt industry. opte vrs ,desg Manager (Environment)

Electrical engineer - building electrical design and rapid transit systems; proposals and specifications; CAD.

Analytical chemist in the fields of oil & gas, petrochemical, fertilizers, pesticides and pharmaceuticals.

Senior mechanical engineer with experience in engineering for material handling, industrial installations and conveying machines in steel industry, mining, cement & chemicals. Start-up assistance for steel industry.

Technical / Lead Safety Engineer

NDT inspector LVL II

reclamation and quarry

11 years experience in offshore construction, field engineering, planning, offshore and onshore project scheduling, field supervision for installation of offshore platforms pipelines spools, pigging and hydrotesting. Preparation of installation procedures, rigging calculations, material procurement

With 12 years in the Oil Field Industry, working in Brasil as well as other countries such as, Colombia, and USA. I became proficient and experienced in Completions, such as Sand Control (Gravel Pack, Frac Pack, High Water Pack, Horizontal Gravel Pack) Upper Completion (single/dual string), Expandab

Network and security Engineer

HR Officer, Recruitment and Administration, Hiring Officer, Hiring Consultant, Marketing

Close supervision of projects handle and monitoring

Degree in Petroleum and Natural Gas Engineering. New Mexico Institute of Mining & Technology (NMT), Socorro NM.

I have masters in Water Resources Management followed by Bachelor of Engineering. Skills in Construction management,people management,sub conatractor mangment,quality control,health and safety

Extensive field application and R&D experience in hard rock drilling rigs, rock tools, DTH hammer, strong trouble shooting skills of hydraulics

I have basic education, knowledge and experience as for Project Metallurgist

Core business is scaffolding; Consulting, controlling, supports, execution business. in Oil & Gas industry and construction industry

Nearly 15 Years QA/QC composite Experince in Electrical Manufacturing as well as Construction of Oil & Gas Central Processing Platform

A result oriented and self-motivated M.Tech Civil Engineering Professional with over 18 years of rich & qualitative experience in Project Management, Civil Engineering and Construction Management of infrastructure projects including Airport Terminals, Buildings Roads and Flyovers.

ASQ Certified Quality Technician with over 8 years Experience in the development and implementation of Quality plans and manufacturing procedures used in the Petroleum and natural industries for Rotary drilling equipments. Regulatory compliance, QA/QC, NDE, Material testing and Inspection

Human resources

A highly motivated professional with 10+ years of diverse hands-on experience in conceptual process design, technical services and developing/upgrading of upstream oil processing facilities. Worked on petrochemical projects, oil sands technologies and water/wastewater treatment plants from front end

Piping Designer with 12+ years of experience in piping design & detail engineering involving Equipment layouts, Piping layouts, Piping isometrics, Tie-in Schedule and Pipe supports for Onshore & Offshore Oil & Gas, Power and Petrochemical Plants. Have good knowledge of all national & international c

A senior logistics specialist - currently pursuing MBA - with 9+ years of track record in administration, logistics, contract and fleet management with cross competencies in MIS report analysis. Seeking a challenging position with a dynamic organization to apply accrued expertise in achieving tangib

Seeking a career change to obtain a challenging Project/Process Engineer position in a Water Management company.

Seeking suitable opportunities in the field of CP including offshore and onshore -industries, oil companies, contracting companies and power sectors, to harness my technical skills & acquired knowledge- to it's best, so as to bring out the best in me and thus to attain the highest degree of progress

Current Position as Air Separation Unit Technical and Process Specialist for Petronas Gas Berhad with previous experience with Air Products Chemical Incorporated and Messer Griesham. Some college from Texas Tech University, Lubbock, Texas USA.

Engineer Graduate with 09 years experience in Automotive Field as Sales ,Warranty, Technical Engineer

Process Engineer Resume Oil and gas

Over 25 years in the construction industry

Heavy Equipment Mechanic Journeyman including Redseal certification. Ten years experience on machines and equipment such as coaches, trucks, trailers, lifts, and others. Also knowledgeable in areas such as A/C, Electrical, Hydraulics, and Air Systems.

Experienced (+29 years) professional geologist with field and laboratory background and prospecting/exploration for gold, PGE and base metals.

Piping Field Engineer – Technical Office

I have generated prospects in several basins. I am a proven oil finder and a team player.

HEALTH, SAFETY & ENVIRONMENT SPECIALIST WITH 20+ YEARS OF EXPERIENCE

mine management, mining engineering opencast & u/g, planing & designing the mine , liaisoning

14 years experience in welding technology ,Have extensive experience in welding(SMAW ,GMAW,FCAW ,SAW,TIG etc) of CS ,Alloy Steel ,C-Mn steel , and SS , DUPLEX STAINLESS STEEL , CU ¡VNI , NI ALLOY AND OTHER CORROSION RESISTANCE MATERIAL

Bachelor of Commerce, Budgetary Control, Inventory Control, Planning & Analization of materials, setting up new storage system, Vendor development, Administration skills.

PETROLEUM ENGINEER WITH 11 YEARS OF INTERNATIONAL EXPERIENCE

An experienced superintendent with the necessary skills required for the safe commissioning and operation of oil and gas treatment plant

I've been self employed since 1994 as a baker selling fresh baked goods to people restricted to a gluten free diet. Not only have I been the chief baker, I started the business, do all the office work, do all the marketing, maintain the website, etc.

Senior structural engineer with 15 years experience. National Diploma (Civil Engineering)Bachelor of Technology (Structural)

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [ 40 ] 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out