Resume - Total of 20 years offshore , for just over the past 4 years I have been working ...

Misco Jobs

Resume #82411

CONTACT INFORMATION:
View contact information...

Experience
* Play active role in encouraging safety to all personnel onboard installation.
* Visibly demonstrate the highest commitment to health, safety and environmental performance.
* Actively participate in the installation and behavioral safety programmes.
* Demand and encourage the highest standards of HSE performance from all well personnel.
* Ensure consistent compliance with standards and be intolerant of inadequate standards and behaviors.
* Be highly visible in the work place in all areas and disciplines.
* Be accountable for all activities carried out at the well site.
* Supervise the drilling and completion phases to meet all the function standards with no accidents, incidents or environmental issues within the given AFE.
* Drive the continuous performance improvement process at the site.
* Strive for the best in class performance in all operations.
* Ensure that information critical for decision making is unfiltered.
* Provide feedback on potential improvements to the programmes, procedures and techniques.
* Ensure all well site personnel have a clear understanding of the work to be carried out.
* Monitor, evaluate, and report on the performance of service company personnel and equipment.
* Ensure environmental procedures are followed and reported.
* Liase with service companies and report all operations to shore based team.
* Supervision of LWD/MWD, wire line and slick line operations.
* Proven ability to handle well control situations, with high gas and high pressure.
* Experienced in cement jobs including cement kick off plugs and coil tubing cement jobs.
* Monitor track and report daily operational costs and well performance.
* Monitor, track and order the required equipment to the rig in good time for operational requirements..
* Over see rig move, correct rig location and spudding of wells. With correction heading on sub sea well head structures
* Drilling of horizontal hole sections and ERD wells.
* Fishing operations on drillpipe, coil tubing, wire line and slick line.
* Milling operations on coil tubing.
* Supervise the cutting and pulling of casing strings and well head / guide bases
* Competent with running completions and well test operations.
* Chairing of daily drilling meetings and safety meetings.
* Competent with IDS and Synergi reporting systems.
* Represent client at the well site and visibly lead the well objectives.
* Measure / prepare and supervise the measuring / running of various casing and casing cement jobs.
* Ensure environmental procedures are followed and reported.
* Ensure the well path is followed and that the specific directional targets are achieved.
* Identify and report any specific performance gaps with the well site personnel.
* Understand the operation and function of all tools run into the well.
* When problem occur provide honest and complete information.
* Ensure thorough investigations of incidents are carried out, followed up and closed out.
* Ensure lessons learned are captured in detail.
* Ensure that the mud properties are in Spec and kept within the required limits and adequate LCM supplies on location.
* To visually confirm that the correct equipment has arrive on the installation.
* Over see the running of the BOP's.
* Keep an up to date track on the well progress relative to the give AFE.
* Over see stripping and kick drills on the rig floor prior to drilling reservoir section.
* Ensure that all daily reports are detailed and accurate.
* Ensure timely call out and return of equipment and personnel to minimize cost.
* Ensure hole cleaning practices are being used.
* Supervise LOT / FIT for the well.
* Monitor the ECD while drilling not to induce formation breakdown with PWD and press pro.
* Input into the chose of bits to be run over the various section and grade the bits when at surface.
* Prepare the final drilling report for the well.
* Make sure all personnel are fully aware of the Well bore stability and potential loss zones
* Ensure that the well abandonment procedures are in accordance with the UKOOA guidelines.
* Supervise and prepare the wire line rig up's and ensure all corrected method statements are in place and correct.
* Supervise the rig up of all well test surface equipment.
* Perform well kill operation with brine.
* Oversee the coil tubing milling and drift runs required to clean out scale from the well.
* Supervise the coil setting of inflatable bridge plugs.
* Oversee the pumping and displace of liquid stone cement through coil tubing. 7" sand screen liner and Run Completion/ nitrogen lift well test.
* Pull completion, Mill window and sidetrack 8-1/2" section.
* Horizontal Cement plugs & Kick off, high gas/ high pressure.
* Complex sub-sea intervention with fishing, milling, plugged coil tubing BHA, well kill and bull heading

Courses
* IDS daily reporting system
* ERD well training
* Aberdeen drilling school HPHT course
* Fernley Proctor stuck pipe
* FMC Sub sea systems
* Synergi (Talisman in house safety reporting system)
* Talisman regulation awareness.
* IWCF Supervisors combined Well control
* Route cause analysis
* Supervisor leading safety
* Extended reach drilling / stuck pipe prevention course.
* Permit to work

SURVIVAL: - RGIT Survival 18.03.2013
MEDICAL: - UKOOA Medical 19.12.2009

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 301 to 350 of 15477)

Go to Search Parameters...

Brief Description

+30 Years experiance as Mining Engineer, and Metallurgist

Highly skilled and experienced Sr. Drilling Engineer, experience with land/offshore (including deepwater), having worked as Drlg Engineer through Drilling Engineering Supervisor for a large scale GoM deepwater developement project.

Accomplished presence in providing EHS decision support to Top Management through strategic planning for more than 16 years.

My techanical abilities in the use of Primavera and my leadership skills may be of significant interest to you. Upon review of my qualifications I think you will find that I would be a very valuable member to your company.

Around 2 decades of functional experience in Maintenance, Repair & Overhauling of Heavy Mining & Construction Equipments such as Bulldozers, Graders, Excavators, Loaders, Rig/Drill Machines, Cranes, Tower cranes, Compacters, Crushers, Batching plants, Water Pumps, Generators, Concrete Pumps/mixer

A highly experienced & qualified, possessing extensive experience in handling any size of organization in various aspects of Finance & Administration seeking a managerial position.

Total of 20 years offshore , for just over the past 4 years I have been working as night drilling supervisor in the UK North Sea. I started my career in mud logging and moved on to being a wellsite geologist,

20 years experience in the mining maintenance field. Experience covering fitter to mechanical superintendent roles.

20 years experience in design, installation, commissioning, performance testing, client personnel training to final handover of the DCS control system for epc power station projects. Excellent working relation with design, process, control, instrument, operation and vendor system personnel.

High educated Creative leader with 18 years of experience in business and human development and multi languages speaker seeking new challenges, quality experiences and more traces

I hold Master degree in palynology and currently Phd student doing research on ordovician silurian palynology

Bachelor Degree in Electrical Engineering,Masters in Management,Having Good technical knowledge about Engg.standards such as IEC, SEC-standards, IEEE, BIS.

looking for a new experience abroad

Chartered Civil Engineer with 30 plus years' experience in project control, construction, & design of major infrastructures, including reclamation, highways, water, drainage, sewage treatment works, underground and above-ground railways. Specialised in Geotechnical Engineering.

20 years experience in drilling/work

Engineering design, offshore and onshore pipelines and facilities, Report writing DBM, FEED, PEP

I graduated from university studies, firstly Drilling and Production then MASTER (Horizontal Drilling Wells). For 2 years I worked as Engineer in Cementing Department for SC Petros SA (Romania), then for 18 years I worked as Engineer and Data Analyst in Drill Stem Testing Department.

Production chemist involved in oil & gas flow assurance, development and validation analytical operating procedures, reliability plant engineering

Working as Dy. Manager (Forestry) and associated with raw material storage management, procurement and Tissue Culture.

Hands on Metallurgist with diversified experience in copper/cobalt refining as well as Sulphuric Acid Plants. I hold a B Min Sc(Met and Min processing) with over 26 yrs experience, 16 yrs at senior level

I am a diligent person and very articulate in presentation. I have a huge experience in Business Development with PETRONAS and its PSC Contractors like Exxon Mobile, Shell, Talisman and Murphy during my stint in promoting VDP status products and services. Cheers

Working in oil and gas project for more that 15 years as a QC- Piping Inspector.

Mining manager 25 yrs of experience

B.E.(Mechanical); 22 Years total Industry Experience; Served with SABIC, Reliance, SPIC & Shell;

HSEQ Manager

Supplier management, vendor development, startegic sourcing, procurement support, procurement management

More than twenty (20) years experience in the field of Engineering Construction in

Manager of milling department woodworking division, wood lamination, sawmill manager, lumber quality checker, logs scaler.

A professional, well-qualified MECHANICAL ENGINEER with extensive project management experience in the oil refining, gas, LNG/LPG, petrochemical and associated industries.

Senior Plant Inspection Engineer. Mechanical engineering graduate with 29 years of experience in Oil/ Petrochemical industries loking after Process Plant Inspection, Materials Inspection, NDT, Corrosion, Failure Analysis, Fabrication/ Welding inspection in running plants + new grass root projects.

Cost, management, financial accountant

Geologist, Heavy Oil and Oilsands. Experienced consultant, prospect generator, horizontal well planner for thermal and CHOPS applications.

dcs operator or panel operator

Process Industries, Oil & GasOffshore & Onshore Construction, Completion, Fabrication & Installation.

I have 22 Years of experience in the Detailed Design and Engineering in the areas of Plant Design & Piping for Oil & Gas, Petrochemical, Chemical and Power Projects. I am presently working as a Head Piping.

Accomplished senior manager with over 23 years experience in Financial Accounting, business development, Auditing and system designs. Special skills in Enterprise Resource Planning ( ERP) system implementation and SAP support and Training,

Extensive experience in multidisciplinary projects for the Canadian, Mexican and Venezuelan Petroleum Industry.

With 20years O&G experience, my main experience has been on major projects during design. I have experience within Operations, Construction and Commissioning and also worked on site; offshore, pipeline construction and FPSO shipyard construction. I have Australian and British Citizenship.

35+ years as Drilling Engineer, Drilling Supervisor, and Drilling Superintendent

Diploma in Polymer Tech.:Plastic And Rubber Institute London (UK), B.Sc. (Chemistry. & Physics.) Mumbai University.

Dedicated professional in Exploration and Production with 27 years experience working for the two largest major Oil Services Companies. Strong engineering background in Drilling and Completion Fluids as well as Drilling Waste Management through years of focused operational management.. Strong engi

Drafter & Designer experience in estimation and designing of transmission lines and poles. Facilitated department meetings for administration of projects. Have worked the industry for twenty-five years and have obtained a Bachelors of Science degree in, Business Administration. Ability to prioritize

Profile: A Specialist Seismic Interpreter with over 15 years experience in Oil & Gas exploration, in seismic interpretation and prospect generation. Having the ability to supervise seismic processing and acquisition activities and take on role as a Project Manager. Confident in ability to cont

Project Manager and Senior Staff Landman and Senior Right of Way Agent

Experienc in the development and management of new mines and existing operations.

Technical English instructor in oil and gas industry, rotational and residential; ESP, ESL and General English in a variety of countries; administrative/management experience as well as technical writing/translation and course writing; BA, MA and TESL cerified

Purchasing/Contract Administration career includes experience in oil & gas, subsea, petrochemicals and drilling. It also includes large and small projects and many years in chemical/refinery enviroment. My Motto: Whatever it takes to get the job done.

Over 31 years of extensive professional experience in various Highway/Road Construction projects in Bangladesh, Ethiopia, U.A.E., Yemen and Laos. Experienced in Geometric and Structural Design of road pavements. Experienced in Execution, Supervision Consultancy and Design of roads including bridges,

Working with Transocean as a Drilling Manager in Integrated services Project started for 5 Jack up rig for Bombay High field with client -ONGC. Operation commence in Jan 2007.

Drilling Engineer offshore tender rigs jackups onshore land rigs

First 1 2 3 4 5 6 [ 7 ] 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out