Resume - Experienced chemical process engineer with more than four years of demonstrated ...

Misco Jobs

Resume #82558

CONTACT INFORMATION:
View contact information...

PROFESSIONAL PROFILE

Experienced chemical process engineer with more than four years of demonstrated effectiveness in the Designing, Production and Technical Service fields. Results-given Process Design Engineer with expertise in CTL(Coal to Liquefaction) projects. Experienced Technical process engineer with proficiency in troubleshooting, process development and product improvement and increasing yields. Skilled at implementing process enhancements designed to reduce operating costs and increase efficiency and productivity. A dedicated, team player that embraces the challenges in an evolving environment and offers a commitment to the production of superior

EDUCATION

BS, Chemical Engineering, Drexel University, Philadelphia, PA, 2005 GPA 3.5

BS, Computer Science, S P University, V.V.Nagar, India, 2001 GPA 3.8

PROFESSIONAL EXPERIENCE

HEADWATERS HTI INC., Hamilton, NJ 2008 – 2009

Process design Engineer
* Develop scopes defining projects, including alternatives and cost benefit analysis
* Create feasibility study for Oil India & Reliance
* Create process design package for coal/coke gasification process
* Designing process unit for refinery including Air Separation Unit.
* Prepare PFD & P&IDs and process specifications for projects
* Create Simulation of ICL & DCL CTL (Coal To Liquid) Plant in PROII
* Create simulation for hydrotreater, Crude & Vacuum Distillation, Amine Treating, Tail Gas Treating and Sour Water Stripper unit in PROII
* Create simulation for Gasifiers for H2 production in PROII
* Generate material balance for non DCL plants

VALERO, Paulsboro, NJ 2004 – 2008

Process Engineer/Technical Service Engineer
* Provide technical support and recommendations to the operation group for the development of daily production and meet the product standards
* Identify opportunities for improvements related to safety, yields, capacity, quality and cost for refinery processes
* Shutdown & Start-up experience of Amine Regeneration, Sulfur Recovery Unit, Tail Gas Unit, Catalytic HydroDesulfurization unit
* Perform catalyst evaluation and propose catalyst lifetime
* Monitor and analyze operating data from the manufacturing process using statistical tools, both proactively (statistical quality/process control) and reactively
* Perform heat integration in the process unit for conservation of energy
* Monitor, troubleshoot process operation and implementation of project
* Developing HYSIS, Aspen, SulSim, ProTreat, TSWEET & ProMax simulation for process optimization for refinery process units
* Create and update PFD & P&ID
* Experience with Diesel Hydotreater, Sulfur Recovery,FCC, CCR, Crude, Naptha Hydroteater, Amine Recovery and Sour Water Stripper process units
* Coordinate turnaround planning for refinery
* Contribute in HAZOP, PHA, PSSR, PSM, MOC and LOPA for new projects of the sulfur complex

Junior Engineer (UNI Engineering contractor)
* Evaluate each piece of equipment, associated pressure relief device, vapor disposal system to ensure adequate overpressure protection and OSHA compliance for North & South flares for Berwanger Project

CERTIFICATION

* Hydroprocessing Certification, 2007
* Distillation Certification, 2006
* John Zink burner Certification, 2006
* Refining Troubleshooting Certification, 2008
* Advanced Degree in Computer Science, Aptech Computer Education, 2000
* Advanced Diploma in Information Technology, ACT Computer Education, 2001
* Java Programming Certificate, Bitech Sun Microsystems, 2000
* Oracle DBA Certificate, New Wave Computer Education, 2001

COMUPTER SKILLS

Software: Excel, Access, PowerPoint, Word, Outlook
Operating Systems: Windows 98, 2000, NT, XP, ME
Programming Languages: C, C++, Visual Basics, COBOL, FORTRAN, PASCAL, HYSYS & Aspen Process Modeling 3.2, elementary Java, AutoCAD
Databases: ORACLE D2K, FoxPro, Aspentech Hyprotech

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5101 to 5150 of 15497)

Go to Search Parameters...

Brief Description

My interesting field is Process Engineering and I am ready to work in field run projects, main office or sales departments as a Process Engineer in oil & gas and Petrochemical Industries.

Rotating Equipment Engineer

I am a skilled user of Microsoft Office and AutoCAD, Corel Draw, QNX, Qlog, Anax500, pressure course, well control course. Good english.

Experience product and manufacturing engineer with strong understanding in design, product develoment, manufacturing, ECN,ERP

Experienced chemical process engineer with more than four years of demonstrated effectiveness in the Designing, Production and Technical Service fields. Results-given Process Design Engineer with expertise in CTL(Coal to Liquefaction) projects. Experienced Technical process engineer with proficien

BMS Project & AMS Manager with 9 Yrs. Experience

Diploma in Electronics with 7 year experience in PLC/CNC/Commissioning

12 years experience. Rig manager for 2 years and Driller for 8 yrs alsoworked as floor hand but worked my way up to rig manager.

Drilling Supervisor / Company Man CBM

Mineral Exploration, Administration and Management.

Field and site experience, Ethylene Plant, Pipelines, Water treatments, Semiconductor tool upgrades, Refinery shut down, Jail, Clean rooms, Data center, Hospital, Schools, Substantial, Close-outs, MEP, Rotating and Static equipment, Process piping, Commissioing and startup, Schudling(P3)

Work experience in the Oil Industry in production, operations and good reservoir skills. Good computing skills, interpersonal relations, ability to work in a team environment.

10 years experience 7 years in paksitan & 3 years in dubai & i have the bachlor of arts degree & some diplomas in health safety & envoirnments.

Senior planning engineer,lead planning engineer,primavera P6,Primavera P5.0,MS-Office,Oil & Gas

¡§Being a Sr.Project Engineer - HVAC with a Post Graduation in Advanced Technological course in Refrigeration and Air Conditioning as Specialization and with hands on Seven Years experience in Project & Service Management (HVAC) .

Cementing Supervisor 3

I am an enthusiastic and professional (HSE engineer) who has emerged from work in-field of Oil spill response, Oil Spill Response Equipment Maintenance, hazardous material response, waste management and STS (Ship to ship transfer) and through the continual training and practical hands on experience,

Exploration Geologist and well aquented with the mining and Exploration Software , almost 4 years of experiance. in Mining and Exploration.

I AM AN ELECTRICAL ENGINEER FROM PAKISTAN WORKED IN MIDDLE EAST CONSTRUCTION COMPANIES

More than 13 yrs experience in oil & gas plant commissioning and start up, worked as commissioning supervisor, process supervisor and control room operator.

Mechanical engineer with more than 4 years experience in oil and gas industry including: site management, planning, supervision, construction, overhauling, revamping, petrochemical plants and refineries.

EPIC / EPCM FEED Feasibility study, Project Execution (Contract Management, Schedule and Planning, Cost Control, Procurement / Expediting)

past 10 yrs in India and Gulf countries as an Electrical Engineer in electrical field & Plant (construction) R O Plant , Batching Plant, Asphlt Plant,

Have gained above 6.7 years depth experience in the Field of Piping and Pipeline in various Onshore projects like Oil and Gas, Power & Petro-Chemical Plants and Water Treatment Plant, Fully conversant with Piping / Pipeline Design Codes API 5L, API6D, NACE, ANSI / ASME 31.3, 31.4 and 31.8.

ExPERT IN REFINARY UTILITY AND POWER PLANT IN FIELD AND PANEL OPERATION , ALSO MASTARUY IN TROUBLE SHOOTING OF EQUIPMENT LIKE COMPRESSOR,PUMPS AND OTHER ERROR OF PLANT PRODUCTION

MECHANICAL ENGINEER (12+), 10 YEARS WORK EXPERIENCE IN QA/QC/QMS WITH REPUTED ENGINEERING INDUSTRIES CERTIFIED WITH ISO/TS 16949:2002 QUALITY MANAGEMENT STANDARD. I HAVE KNOWLEDGE OF 5 CORE TOOLS APQP, MSA, PPAP, FMEA & SPC.

A research and development position or QC/QA/synthetic position in the pharmaceutical/chemical industry that takes advantage of extensive experience in synthetic/analytical chemistry

Mining Engineer with MBA (Operations Management), FCC (Metal), Base Metal (OP & U/G) & Iron Ore Mining (OP) +22 years of Hands on Hard Rock Mining Experience in Open Pit Mining (15 yrs.) & Underground Mining (7 yrs.), Mine Operations, Short term Mine Planning, Drilling & Blasting,

Experienced Marketing, Sales and Technical professional with comprehensive Business Development, strategic planning and implementation skills, seeking a position where these skills will add greater value. Proven leadership, presentation, negotiation and problem resolution abilities.

I have 13 years of experience in Mechanical Field as Project Manager in a project of special equipment which is a multimillion Dollars project supervised by me from 2001 to 2004 and have experience in Budgeting, Coordination, Project Management, Planning & Scheduling, Presentation, Construction & Lo

More than 18 years experience in DCS Engineering, Instrumentation Detail Engineering, Construction, Maintenance and Troubleshooting in Refineries, Petrochemicals & Project Management. Have worked overseas in Project Engineering arena in Canada, Kuwait, Singapore and India.

Instrument & control Engineer

15 years sound experience in almost all field of Instrumentation including, Project. construction, commissioning, planning, maintenance, Major modification, Revamping etc.

I have directed diverse construction sites, being in charge of but of 300 people, and controlling great projects of construction

Mechanical Engineer with 13 years of experience in pipeline design, estimating, commissioning and construction management in Oil and Gas industry.

Project management & consultancy experience for large refineries & power plant in Mumbai.

Petroleum engineer with over 16 years of industry & regulatory background in production & injection well drilling, design and operations; including regulatory aspects.

Spent About Nineteen Years In The Marine Field. Thirteen Years As A Senior Electrical Officer Gaining Broad- Based Hands On Engineering Skills Encompassing Servicing ,Installation , Fault Finding , Conversion , Modification , Commissioning ,Surveying , Repair, Running And Maintenance

Offers more than ten years of versatile experience in all phases of petroleum, gas, and alternative production facility operation. Equipped with a master’s degree in chemical engineering and a background in the development of PFDs and P/IDs. Excels at risk/hazard review and mitigation.

13 years experience as E.A. & have worked with Top Official’s of industries like mfg., service, infrastructure project, telecom, etc. Given that the whole exp. is with different ind. ,the exposure was across ind. & across functions, thus a rich experience of managing Top Management office.

More than 16 years of experience in all areas of steel pipe manufacturing, including shop production, sales, distribution, and production management. Possesses excellent leadership, communication, and project management skills. Able to work independently or in a team environment.

Project Engineering, Project Management, Mechanical Engineering, Piping Engineering

Experience in the Power, Water and Wastewater automation and process control. Designing and developing automation solutions for PLC/ SCADA systems. Project management of automation and Telemetry projects. Leading role in design, engineering, testing and commissioning

19 years process background in varied complex plants. Success gained in expatriate, residential and remote work environments. Utilised strong leadership ideals and practices to promote and empower subordinates and effected communication to all levels of management.

8 years experience as a Drilling Engineer, Drilling Supervisor, Directional Driller & Well Performance Engineer(Onshore & Offshore).

Mechanical Commissioning & Maintenance, Maintenance Planning Scheduling

1.Accurately process and record all technical documentation in accordance with agreed procedures. 2.Input progress mark-up information into Document Management System (DMS). 3.Receive, check accurately record into DMS system and distribute all project technical drawings and documentation

Extensie background in instrumentation and analyzers. Lots of CEMS experience.

Fourteen years Welding/Materials/NDE experience in fossil power industry, oil&gas industry, engineering, fabrication and construction

Currently Sr. piping designer on Bentley 3d and piping design checker. Experienced in all areas of piping Including high temperature and high pressure piping systems, lined and jacketed pipe, stress analysis, p&id’s, specifications, process, utilities, sulfonation, pharmaceutical, pharmaceutical val

First Prev 101 102 [ 103 ] 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out