Resume - A TWI certified and registered welding inspector (CSWIP 3.1) and worked as Field...

Misco Jobs

Resume #82834

CONTACT INFORMATION:
View contact information...

Career Summary:

A TWI certified and registered welding inspector (CSWIP 3.1) and worked as Field Piping Engineer with fourteen (14) years extensive experienced in oil and gas construction projects, refineries, gas plant, GOSP, power plant and desalination plant. Major activities involved general oversight of the fabrication/construction activities from a quality and good construction practice standpoint. Activities involved in welding inspection, structural, piping inspection, materials inspection, punchlisting/walkdown inspections, hydro test inspection, turnover documents and pre commissioning activities. Review and provide recommendations to construction issues raised through site queries and technical queries. Review of ITP'S and documentation. Inspection on site and fabrication shop to ensure that work is being performed in compliance with the project quality control requirement. Responsible for observing the contractors fabrication/construction techniques, procedures and installation to ensure it is performed in accordance with project specifications and requirements. Ensure pre- commissioning activities are carried out in compliance with project requirements. Participate in the weekly QC and construction meetings review as well as weekly safety walk down inspection on site and weekly safety general meeting with the sub contractors. Complies with the Company's QHSE management system and reports all incidents and near misses the QHSE representative.

EDUCATIONAL ATTAINMENT:

Course: Bachelor of Science in Civil Engineering
Western Philippine Colleges
Batangas City Phillippines
Graduated -1991
QUALIFICATION:

TWI CSWIP 3.1 TWI Cert. No. 7642/2
TWI Registered Welding Inspector Registration No. R/2914
TWI International Welding Inspector Diploma No. IWI-B/GB/02716
TWI European Welding Inspt'r Practitioner Diploma No. EWIP/GB/02716
Aramco Qualified Inspector Sap No. 70002078

TRAININGS AND SEMINARS:

CSWIP Course SGS Inspection Services Saudi Arabia Ltd.
P.O Box 6702
Dammam 31452 KSA
August 2003

Hands on Training of PT and MT Belleli Saudi Arabia Ltd.
Yanbu, KSA
May 1993

Welding Inspector's Course Philippine Welding Society
Manila, Philippine
October 1992

Upgrading In Pipefitting National Manpower and Youth Council
Manila, Philippines
October 1991

EMPLOYMENT HISTORY:

Company: Air Energy Resources (Qatar)
Project: Qatar Gas 3&4 On Shore Projects- QCS
Location: Ras Laffan, Qatar
Position: Mechanical Inspector/Welding Inspector
Date: 24November2008 to Present

JOB DESCRIPTION:

Mechanical and welding inspection in Train6 and Train 7. Inspection activities include witnessed mechanical allignment of Column, Vessel, Exchanger and other stationary equipment. Internal inspection of Column tray.Welding Inspection and Piping Inspection.Walkdown inspection of completed line.Witnessed hydrotest inspection and pneumatic inspection.Review of test packages.

Company: Technip Italy (Saudi Arabia Ltd.)
Project: Khursaniyah Gas Plant (Aramco Project)
Location: Khursaniyah, KSA
Position: Welding Inspector
Date: 23February 2008 to 10November 2008

JOB DESCRIPTION:

Inspection of piping fabrication and site erection in relation to daily fit up, weld visual inspection and preparation of documents. Monitoring welder performance and weld repair status on weekly basis. Preparing NCR's, DR's and QA/QC reports. Review of test packages. Punch listing and prepare punch list items prior to hydrotest. Documentation of welding, NDT and NDE reports. Preparation of reports for client submittal. Welding material control, welder control, welding repairs. Responsible to complete necessary documents for all witnessed items. Coordinating with construction supervisor/engineer. Reporting of poor workmanship and violation. Coordinating with NDT crews and third party inspector. Supervised subcontractor's inspectors with regards to site inspection and quality.

Company: Eastern Bechtel Company Ltd. (EPC)
Project: Habshan III Project (OGD III)
Location: Habshan, Abu Dhabi
Position: Field Piping Engineer
Date: October 2007 to December 2007

JOB DESCRIPTION:

Ensures engineering issues related to piping design, fabrication, installation, testing and pre-commissioning are resolved consistent with the project design. Received and answer site RFI's in relation to problem encountered on site during erection. Resolved in a timely manner field piping related issues that arise between the EPC contractors, sub contractors, vendors and other interfaces. Carry out final inspection of installed piping and inline equipment, produce punch lists and supervise completion of remedial works. Track and report installed commodities. Monitors contractor's performance for piping and installation system and provide advice and take necessary actions to achieve company's design goals and meet specification requirements. Keeps supervisor informed on issues and schedule progress through regular reporting. Provide technical support to construction organization to assist field construction in the design requirements. Observe the subcontractor's operation and record daily accomplishments, problems, and manpower and equipment usage. Instruct site personnel in good housekeeping and safety practices. Assures projects safety and quality expectations are satisfied.

Company:
Bechtel /Senimdi Kurylys Joint Venture
Main Contractor: Parsons Fluor Daniel (PFD)
Project: SGP, TengizChevroil (TCO)
Location: Tengiz, Kazakhstan
Position: Sr. QC Engineer I - Welding & Hydrotest
Date: August 2006 to August 17, 2007

JOB DESCRIPTION:

Implementation of contractors QA / QC Programs and Activities in compliance to company codes and standards, project specification, QC procedures and (ITP's). Monitoring and Surveillance of all welding operations and piping works, ensuring piping installation / material correctness per approved drawings and ensuring welding execution, qualified welder performance. Monitor, review and approved contractors NDT (PT/MT/RT), PWHT, hardness & PMI Tests activities. Report any deviation, non compliance and recommend possible solutions to discrepancies found based on codes / standards, approved procedures and client specification. Perform and witness hold point activities. Pre and final line checking of piping test packages and weld count completion.

Company: Consolidated Contractors Company
Main Contractor: Japan Gas Corporation (JGC)
Project: Sohar Refinery Project
Location: Sultanate of Oman
Position: Welding/Piping Inspector
Date: February 14, 2005 to May 2, 2006

JOB DESCRIPTION:

Responsibility includes monitor and control welding variables and parameters listed in WPS during welding operations of all piping works. Involved in activities like welding surveillance/inspection, schedule for NDT, monitor PWHT activities, checked qualification of welders, witness actual welding of test specimen for PQR and WQT and make sure it is in accordance with procedure. In process welding surveillance to verify compliance with specified procedure including any preheats, interpass temperature control and post heat requirements Check that all equipment and inspection instruments are calibrated. Maintaining records of calibration, inspection and testing equipment. Manage quality activities at site related to Welding and NDE. Monitor pipe spool fabrication and installation in relation to fit ups, dimensions, alignments and distortion. Check joint fit up, bevel angle, root gap, root face and alignment of pipes before welding in all phases of fabrication.

Company: Consolidated Contractors Company
Main Contractor: Snamprogetti
Project: Gas & Oil Separation Plant (ARAMCO Project)
Location: Qatiff, KSA
Position: Welding Inspector
Date: August 2003 to October 2004

JOB DESCRIPTION:

Inspection activities on site and fabrication shop related to Welding, Piping, Structural and NDE. Monitor pipe spool fabrication and installation in relation to fit ups, dimensions, alignments and distortion. Check joint fit up, bevel angle, root gap, root face and alignment of pipes before welding in all phases of fabrication. Surveillance of welding activities in relation to Structural and Piping, verification of consumable control, welders qualification, correct application of weld procedures, preheat and PWHT. Conduct routine welding inspection on site. Supervise the quality of construction welding work and carryout proper surveillance and inspection of welding activities. Carryout witness, inspection and surveillance checks in accordance with the Site Quality Plan and contractor inspection and test plans. Check weather condition if suitable for welding. Confirmation of finished welds profiles and releases of sub assemblies, and completed assemblies for subsequent released to painting, erection and NDE.

Company: Consolidated Contractors Company
Main Contractor: Japan Gas Corporation (JGC)
Project: Haradh Gas Plant (ARAMCO Project)
Location: Haradh, KSA
Position: Welding/Piping Inspector
Date: February 2002 to June 2003

JOB DESCRIPTION:

Check and review daily welding reports. Performs inspections of various installation activities for adherence to welding specifications and procedures. Generates reports of conditions found during inspection activities. Notifies Quality management of significant problems and reports non-conforming items. Check isometric and fabrication drawing and verify if all the WPS for all types of joints are available. Do line checking of welds prior releasing of test packs. Review of test packages. Witnessed of Hydro test, flushing, pneumatic, and drying, reinstatement and chemical cleaning as required. Witnessed non destructive testing which is performed by sub contractor inspection personnel such as PT and MT. Day to Day interface with contractor's inspection, supervisor and engineering personnel. Coordinate with Document Control, Production, Project Management Team, Engineering Department, and Certifying Authority and Client Site Representative with regards to Quality aspect.

Company: Consolidated Contractors Company
Main Contractor: Japan Gas Corporation (JGC)
Project: Hawiyah Gas Plant (ARAMCO Project)
Location: Hawiyah, KSA
Position: Piping Inspector
Date: January 2000 to August 2001

JOB DESCRIPTION:

Responsibility includes dimensioning of fabricated spools as well as checking the orientation prior to release for welding. Inspect that each piece of pipe is marked with corresponding traceability before cutting. Verifying piping material identity (pipe, valves and fittings) and its conformance to installation/erection drawings. Performing piping walkdown inspection and completing punch list. Ensure contractor's dimensional control methods for checking that all works are properly set-out and satisfactory. Verifications that dimensions, fitup and weld preparations are in accordance with WPS and drawings. Check the fittings required for particular spools/assembly are complete and as per isometric. Do line checking of pipes and prepare punch list items before releasing to hydrotest.Walkdown inspection of completed system prior to turnover. Reviewing and verifying completeness of piping test packages (hydro or pneumatic) prior to testing. Witnessed pressure testing of lines as well as pneumatic inspection. Witnessed air drying and blowing of pipes. Do reinstatement of lines after hydrotest and pneumatic inspection. Inspection and close out system punchlist.

Company: Consolidated Contractors Company
Main Contractor: Technimont
Project: Saudi Arabian Fertilizer Company (SAFCO II)
Location: Jubail, KSA
Position: Piping Inspector
Date: January 1999 to July 1999

JOB DESCRIPTION:

Activities on site include punchlisting of completed lines and prepare punchlist items. Review of hydrotest packages prior to releasing to test. Witnessed hydrotest and pneumatic inspection. Reinstatement inspection and closing out system punchlist. Prepare as built drawings as per site condition.

Company: Consolidated Contractors Company
Main Contractor: Bechtel Corporation
Project: Shaybha Producing Facilities (ARAMCO Project)
Location: Shaybha, KSA
Position: Welding Inspector
Date: March 1997 to April 1998

JOB DESCRIPTION:

Dimensional inspection of structural beams, columns and girders prior to releasing to welding. Weld visual inspection of structural and pipe spools prior to releasing to painting and NDE. Checked qualification of welders, witness actual welding of test specimen for PQR and WQT and make sure it is in accordance with procedure. Witnessed pneumatic inspection of reinforcing pad. Review DWR's of pipe spools and structural on daily basis. Inspects welded joints of work in progress and of completed structures/piping/pipeline trunks for visible weld defects, correct dimensions, weld sizes, type of weld etc., in conformance with approved drawings, and work order specifications. Verify traceability of materials during in process inspection. Verify alignment and dimensions of pipe spools. After visual acceptance of a weld, request for the required NDT of that welds as per approved weld maps and follow up with NDT to insure it is carried out and reported. Records inspection data. Raises NCR's for defective products or workmanship. Witnessing flushing, hydro-test of piping, verifying re-instatement of piping after completion of installation. Raising punch lists for incomplete works. Monitors welder's performance in shop and site.

Company: Belleli Saudi Arabia Limited

Main Contractor: Snamprogetti & Ansaldo Energia
Project: Power Plant & Desalination Plant (SWCC)
Location: Yanbu, KSA
Position: Welding Inspector
Date: March 1993 to February 1997

JOB DESCRIPTION:

Welding inspection on evaporator shell. Checking joint fit up, visual inspection of pipe spools in evaporator and boiler spools, welder's qualification, NDE request and coordinate with NDT coordinator. Weld visual inspection in water box of evaporator. Monitor PWHT activities. Carryout witness, inspection and surveillance checks in accordance with the Site Quality Plan and contractor inspection and test plans. Review of test circuit, punchlisting and hydrotest inspection. Witnessed air blowing and water flushing of line. Day to Day inspection of nitrogen purging of boiler. Conduct test circuit reinstatement for final mechanical completion and handover to client.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 15497)

Go to Search Parameters...

Brief Description

Quantity Surveyor 3 yrs experience in Gulf

New Mine Start Up. Project Management. Infrastructure EPCM.

Experienced in sweet and sour, oil and gas projects. Execute projects on time and on budget while working as a team player. Solutions oriented with an eye toward bottom-line results. Organized multiple projects concurrently, with successful results in a fast paced environment. Effective communicat

I am a multi-disciplined Project Services / Planning & Cost Engineer / Scheduler (Project Controls Engineer) with excellent analytical skills, flexible and strong personality, very good communication & coordination skills, team player, friendly, and result-oriented.

I have rough-necked, worked as a drilling engineer and as a consulting well-site supervisor and can relate to every level of personnel around the rig, effectively. Explainig the reasoning behind why things are done a certain way helps everyone buy into the total project, and reach a common goal.

Instrumentation Engineer

I'm Technical Degree in Geology (Associate Degree in Geology) and I'm looking for a job as Mud Engineer Worldwide.

Results-oriented, quality-driven professional with extensive experience in onshore, offshore operations and construction, demonstrating consistent achievement of objectives, strong leadership & management skills. Advance presentation & inter-personal skills and MS Office literate.

In addition to my graduate engineering degree and more than 15 year of experience in power generation and chemical plants. I have currenly done my MS in Total Quality management.

Document Controller / Document Manager/ Crewing Manager

Toopusher, Rig manager, Drilling Supervisor, Directional Driller

Senior rotating equipment with 12 years experience with sound knowledge of project engineering and project management

B. Tech. (Electrical Engg.) from Rajasthan Vidyapeth (Deemed) University, Udaipur.

KEY COMPETENCIES

A highly skilled Petroleum Engineer with over 20 years domestic and international experience in Petroleum Industry as a Petroleum Engineer, experience in reputed International Service Company

A Bachelor's degree holder in Chemical engg, have about 20+ years of Hydro carbon Industries experience both in Oil & Gas refineries and Oil production facilities. Having very good knowledge and trained in Fire fighting techniques and Plant safety equipments.

Industrial, B2B and Retail sales & marketing of ‘Fuels, Lubricants and other Petroleum Products’

Management Consultant / Project Manager / Business Process Analyst – task oriented, problem solver with successful experience in planning and implementing operational enhancements in support of critical business processes.

20 years of extensive knowledge and experience in Production, Quality Assurance & People Management in chemicals & petrochemicals plants, presently associated with YANSAB, Yanbu (Kingdom Of Saudi Arabia).

A TWI certified and registered welding inspector (CSWIP 3.1) and worked as Field Piping Engineer with fourteen (14) years extensive experienced in oil and gas construction projects, refineries, gas plant, GOSP, power plant and desalination plant. Major activities involved general oversight of the

Graduate in Mechanical Engineering having 15+years in Static Equipments & Packages Design & detail engg. engaged in Design & detailed engg. of pressure vessels, Columns for Oil & gas Applications and all other types of static equipments & packages, I have a good exposure in EPCM

I am a B.Tech (Production Engg) graduate with Nace certified Level-I coating inspector, I have more than 16 years exp in various fields including 8 years in coating field. Also I was handled various pipeline projects in oil & gas field for 5 years

I am a post graduate in chemistry working as Senior Chemist in KOC.Well experience in crude oil, Gas and Water analysis. Handling of all kind of Lab Instruments,Calibration ,standard chemicals preparation, reports making are the responsibilities.

MEP Cad Designer / MEP Cad Coordinator / HVAC Designer

Knowledgeable in electrical, mechanical, and some electronics

Lead/Senior Mechanical Engineer- Oil & Gas, Chemical, Petrochemical and Energy Industries

Free! Oil and Gas Industry onshore construction civil engineering Superintendent with 20 years experience in overseas projects.

I am a B.Sc Chemistry degree holder and have totally 24 years of very good experience in PROCESS FIELD / PANEL operations in oil/gas treatment plant. This is one of the biggest oil processing plant in India. SOUTHERN PETROCHEMICAL INDUSTRIES CORPORATION LTD., (SPIC).

Twenty plus year's progressive experience in heavy industrial design, development, and construction for petrochemical refineries, upstream petrochemical, waste water treatment, power generation, chemical demilitarization facilities, Microchip facilities, LPG gas transitions, and the food & beverage

electrical contractor for 25 years and have a ton of experience in the electrical field.

Mining Engineer in area of Mine Planning- Surpac

Electrical Supervisor Mining

I am very talented and a hard worker. I have a good eye for any type of construction.

Outstanding background of knowledge’s into oil and gas processing and utilities, more then 14 years experience into commissioning and process activities from which more than three years offshore, working into an multicultural team and with all disciplines engineers, proactive and disciplined

Prospecting,Boaring and Rotary Drilling, Geological Log and core-log Preparation Exploratory mining pit, Liaisoning, Estimation of Reserve, Sampling, Stacking, Environment pollution control & study, Preparation of Mining Plans in co-ordination with R.Q.P., Celebration of Envirnment and safety week,

24 years of experience in Upstream And Downstream (Refinery) Oil & Gas Operations and Process Engineering out of which:

20 years experience. Executive with proven management, operations, P&L management, and business law experience. Communicator, negotiator, and capital raiser. Global, regional, and country specific business expertise.

all-round civil engineering background with experience in traditional building constructions and special structures, such as bridges, tunnels, towers, piers and offshore structures including design, planning, project management, quality assurance and supervision.

Challenging job related to oilfield, where I can capitalize on my 23 years of oilfield experience with Schlumberger in management, sales, marketing and contracts negotiations. No geographical preference. No schooling constraints.

20+ years experience in private & public sector contract, program/project mgmt. Developed/initiated groundwater evaluation,implementation, monitoring & technology development plans for containment and/or clean-up of nuclear and non nuclear waste (domestic/international).

Geophysical modelling Rock physics, AVO, Pre-stack and Post-Stack Seismic Inversion, seismology, reservoir characterization, Interpreted seismic data (3D, 2D) & amplitude analysis using Seisworks, PostStack/ PAL, IESX, and EarthCube. Certified Landmark Graphics instructor

I have completed a BSc in Geology and a PhD in Petroleum Engineering. In the last 20 years working for BP I have worked as a Production Technologist, Completions Engineer, Reservoir Engineer and in Production Operations, both onshore and also offshore on an FPSO, in recent years as a Team Leader.

Extensive experience and skills to help industrial organizations improve their effectiveness through better use of processes and systems. Also very proficient in development and use of integrated improvement teams.

22 yrs experience in environmental science. Marine, freshwater and coastal. Environmental impact assessment. Monitoring, mitigation and remediation programs for impacted habitats. Extensive international experience, wide industry experience. freelance.

Geophysicist, 4+ years of experience in the seismic data processing onboard & in data processing center. Ph.D. in the field of Geophysics. Skills: Seismic Data Processing (2-D/3-D) by ProMax & Focus, imaging by Geodepth (Depth-Velocity modeling, Depth Migration), AVO analysis by Probe.

Reservoir Engineer with over 20 years of experience in international oil company, consulting/software company and consulting company both in technical capacities and management and business development.

field appraisal, depletion, material balance, well test, reserve estimates, water injection, fractional flow, gas injection, reservoir evaluation, production forecast, reservoir and production monitoring, data acquisition, multilaterals, development projects, reservoir modelling and simulation.

7 years experienced in Oil Refinery Operations . 8 years experienced in Petroleum and Gas Processing Engineering (Design, Research and Development of Oil Refinery Processes). 5 years of international exposure in Europe , Asia, Africa, Middle East .

Knowledgeable and experienced Design Procedures with 15 years road construction experience

I have a record of outstanding success in the field of Instrumentation Engineering for the past 20 years with various clients and consultants in India and overseas for the Oil & Gas (both onshore and offshore upstream)/Petrochemical/LNG Projects/Plants.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out