Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #82940 next resume »»
CONTACT INFORMATION:
View contact information...

Skilled in the following trades;
Strong Organized Working Foreman
CNC Operator / Programmer
Fitter / Welder
Iron Worker
Millwright
Shop Machinery Operator
Material Handler / Inventory Auditor
Maintenance / Repair Technician
Entry Level CAD Draftsman
Computer Tech (I am MCSE certified)
Web Designer
Network Administrator (.net, PHP5 MySQL, database implication, backup, monitoring and design, Corn Jobs, Perl interface and Apache table structures,)

SPECIAL QUALIFICATIONS;
* Advanced in plumbing, electrical wiring repair, and construction processes.
* Advanced in HVAC repair.
* ASME certified welder: (Experience in MIG, TIG, Stick, Heliarc)
* The making of specialty metal tooling to make work more efficient: (leverage keys, jigs, tack plates, dawgs/wedges ect.)
* Material Handling and Inventory:
* Read and Study of Blue-Prints: (lengths, widths, angles, slope-angles, weld type, weld placement, weld shrinkage, weld size, weld penetration, finishing grinding)
* Shop math: (Finding square, dividing radiuses, calculating slopes and loads, math conversions)
* Efficient in reading: (tape measures, micrometers, various calipers, dial indicators, feeler gauges, laser measuring equipment)
* Knowledge of various ISO 9000 and 9001 processes dealing with metal construction.
* Extensive use of hand held plasma cutter plus oxy-acetylene.
* CNC Plasma Table Operator: (cut preseason pieces)
* CNC Machinery Operator: (laths and milling machines)
* Overhead Crane Operator up to 50 tons: (magnetic and vacuum)
* Load Rigger: (use of straps, chain straps and spreaders to safety host heavy objects)
* Fork Lift, Fork Truck, Backhoe, Man lifts up to 125 foot, man basket experience:
* Metal cutting and forming skills:
* Sheet Metal cutting and forming skills:
* Managerial Skills:
* Supporter of other employees:
* Safety Orientated:
*

WORK HISTORY:

1993/1997 Welder/Fitter - CNC Plasma Operator
Butler Manufacturing Company
IH 35 San Marcos, TX. 78666
(512) 353-6100

Duties: Certified welder, Fitter, CNC Plasma Table Operator.
Brief Description of responsibilities:
Butler is the leading manufacturer of pre-fab metal buildings.
As Fitter/Welder:
I Read and Study blue-prints, Weld and fit end plates to structural components, Find any defect in component and finish weld, grinding and truing each component, Each component had to be finished and ready for the Paint Shop with my stamp and the of another welder which checked off on my work. I also checked the work of my co-workers and stamped off on their components only after: I looked at each weld for size, undercut, and porosity. Take measurements of components, length, width, hole placement, hole size, and straightness which had to be within a 1/16th of an inch from blue-prints. Attended bi-weekly safely class meetings, I always looked out for the safety of myself and my co-workers, and reported any unsafe practices and equipment to shop foreman. Work space clean-up after each shift. Maintenance on welding equipment, such as replacing 100lb coils of welding wire, nozzle and tip replacement, gun tare-down and replacement of gas tub, wire tub, and gun parts that would ware out.
As plasma operator:
I operated and maintained a dual cutting head CNC controlled Plasma Table cutting machine. Ordered metal from yard to make webs, flanges, and any other specialty parts to tolerances of 1/32nd. Kept logs of material, material used, material returned, drop material, and parts made. Programmed machine to cut each piece as said per blue-print. Used magnetic and vacuum over head cranes to move material. Made sure that parts came out on time and in order. Looked after the rest of the line which included: a flange hole punch operator, web to flange tack station, and sub-arc welder operator. I'd make sure pieces were in order and on time to be shipped to weld shop for finishing.
Contributions and learning experiences:
While at Butler I seen the company go through many changes. I was hired for a new program that would teach welders in house with teachers from different tech-schools from the Austin TX area. I received a four week in class welding, before starting. I apprenticed for six months with an experienced welder before setting off on my own. I seen butler go through a total tool remodel, and was chosen to learn how to operate the new CNC plasma machine, since I'd had shown computer experience and good organizational skills. While operating the plasma machine, I made many specialty parts that were used in the remodel such as: a fifty foot paint dip tank, large shelves that holds crates of metal siding material, roller conveyer systems, weld station tools, and paint booth parts just to name a few. Butler held bi-weekly safety class meetings were I've learned many important safely practices. I enjoyed this job very much and took pride in the pieces I made.
Reasons for leaving:
I gave Butler a three week notice. My farther pasted away and I decided to take over Dockside Restaurant so it wouldn't go out of business. Before I left, I trained my replacement for the plasma table.

1997-2000 Owner: Dockside Bar & Grill
420 W. Cotter Port Aransas, TX. 78373
Copy of sale tax forms available

Duties: All aspects of owning, running, and maintaining a business.
Brief description of responsibilities:
Manger/Owner; Make sure customers are satisfied, Recruit and Dismiss employees, Ordering all inventory (dealing with food salespeople, restaurant equipment salespeople, to building contractors), Oversee work, cleaning and organizational practices of work staff, Staff meetings, Staff reprimands, Scheduling, Profit & Loss statements, Staff and inventory control i.e.. Not to go over set budget, prepared weekly payroll, keep daily books, calculate estimated quartile income tax, sales tax, bar tax, 941, 940, Kept track of payments due. Prepared income tax forms with the aid of my accountant.
Contributions and learning experiences:
I took over the business after my father passed away. Instead of letting the family business shut down, I decided I would take the business over.
The building was in very bad disrepair when I took it over, and needed many repairs/improvements. I remodeled the business acting as my own sub-contractor, pulled all the local building permits using contractors to do the jobs I wasn't qualified to undertake..
I have had many positive learning experiences throughout my ownership of the business. I have kept my "building" desire by remodeling and maintaining the building and the equipment. I've learned how businesses work and the time involved running one. I have learned how to get along with all sorts of people and attitudes. I have learned leadership skills that my staff would fallow and rarely had any problems. I think the most important thing I've learned is to be a part of the business not just an employee.
Reason for Leaving:
Divorce forced sale. I sold the business to my family.

12/1/00-2/15/01 Major Maintenance - City of Corpus Christi
Waste Water Department
Director
Foster Crowell
361 857 1800

Duties: Worked on one of the four maintenance crews that serviced all of Corpus
Christi's waste water plants. I worked as a welder on my crew.
Brief description of responsibilities:
Welder/Maintenance Crew, Fabricate and install a parts to keep plants in operation. Perform maintenance on city wide lift stations this includes pipes, pumps, valves, and lift station structure. Perform Maintenance at waste water plants that included, replacing sections on pipes, valves, cast pipe sections, maintained and rebuilt, valves, many different types of electric pumps and blower pumps, conveyer belt systems, standard plumbing and wiring of all rebuilt and new equipment. Operated winch truck to remove larger pumps and valves almost on a daily bias.
Contributions and learning experiences:
I've learned more about electrical wiring I have no problem working with three phase or working on electric equipment, plus Heavy-duty valves. Preventive maintenance and personal safety
Reason for Leaving:
I left the city because the work conditions were too unsafe working around waste water, I was also offered a better wage and safer work conditions with another company.

2/16/01 - 4/25/01 Welder/Fabrication Forman - Gaiter Steel
Orange Grove, TX
Cole Browning "out of business"

Duties: Foreman of ten man crew, Welder plus fabricating and erection of metal buildings.
Made and installed beams, metal siding, door jams, window frames, and insulation. Used cranes, forklifts, and bucket cranes to install beams, and metal siding as long as 30 foot. Performed daily maintenance on welding equipment, heavy equipment and tools. Set up jobs for the other workers to perform for that day and made sure it was getting done on time.
Contributions and learning experiences:
Since working for butler manufacturing I am well versed on this type of this construction.
Reason for Leaving:
I left to try and open a restaurant.

2001-2003 Owner: Goodfellas Winery
5117 Webber Road Corpus Christi, TX.
Copy of sale tax forms available

I decided to try and open a restaurant in Corpus Christi. I spend over six months remodeling and opening this restaurant. I went through all the aspects of running this business from start to finish. I pulled all city permits in order to complete this work.
I personally remodel that restaurant with my own time and money.
Contributions and learning experiences:
I will never open another restaurant.
Reason for Leaving:
I was certain with my experience, that I could do good business there. Do to major road work in front of the business at the time the business was open it just couldn't sustain it's self, so I decided to close it...

2003-2004 Gulf Copper Ship Repair
4721 E Navigation Blvd Corpus Christi, TX
(361) 883-1040 Aransas Pass Location, Please speak to Lorenzo the head foreman.

Duties: I worked as a welder, ship fitter, valve mechanic.
Brief description of responsibilities:
Gulf Chopper is a ship repair facially that services naval station Ingleside's fleet of mine sweeper ships, and other privately owned large vessels. Gulf chopper has a floating boat dock, which was a 1942 Navy repair ship.
It was my duty to maintain this ship to strict navel codes. I would actually take pieces of rusted metal (I-beam, plate steel and pipe) from the ship and replace them; this was all inspected by the Navy.
I also worked on valves though out the ship and exercised them regularly. The valves sink the dry dock so the lager boat can be lifted out of the water, it was very interesting.
Contributions and learning experiences:
While there I learned many new fabrication skills they follow ISO9000:2000 I learned tig welding on presser vessels, joining chopper/nickel piping, and high quality heliarc welding,
Reason for Leaving:
Well I really liked this job, but it required me to work 84 hours a week, It was really affecting my family life.
There was also a very bad heath risk, many time I was welding in confined spaces after several months I could feel the effects from this, it was a hard decision but my health come first.

2004 - 2006 Lead Dock Builder
Grendwald Construction Company
Aransas Pass:

Duties: Crew foreman that builds boat docks at homes near the water.
Brief description of responsibilities:
Build custom boat docks, disassemble old docks then dispose of old materials. Set up for new dock, this includes preparing the site to get a reference so new dock comes out level. Unload wooden pilings that are eight inches by eight inches then rig them in the winch. These pilings must be set to hold the dock in place which means they are sunk under water using a jet hose.
Once dock is almost completed a boat lift is installed to lift boats out of the water.
This is not a easy job, the wood that is used is treated to expel the elements so it is very heavy, and I must life over 100lbs on a daily basis,
Reason for Leaving:
I left because this is a friends business and I just started to help him out. After two years working full time I never got a raise and wasn't making enough to support my family and working for friend is not good at all, but we remain friends.

2006-2008 Lead Dock Builder
Smart Docks Inc. www.smartdocks.com
Aransas Pass
Duties: Crew foreman that builds boat docks at homes near the water
Brief description of responsibilities:
Build custom boat docks, disassemble old docks then dispose of old material. Set up for new dock, this includes preparing the site to get a reference so new dock comes out level. Unload wooden pilings that are eight inches by eight inches by twenty foot then rig them in the winch. These pilings then must be set to hold the dock in place which means they are sunk under water using a jet hose and a lot of muscle to set them in place. I would keep inventory and order what was needed for get job.
Once dock is almost completed a boat lift is installed to lift boats out of the water.
Contributions and learning experiences:
When I started there were two workers, I worked with the owner and got another boat and crew in the water, then a third. I worked very hard keeping things together, and sadly after I departed they lost two of those crews. I also did all of the welding and maintenance work on the boats plus shop equipment.
If you look at their web site I built most of the docks.
Reason for Leaving:
I left because I've worked for them for two years and my paid is not much more than the job I had with Grendwald Construction Company and my bills were not being met therefore I must find other employment.

On a personal note:
I work really well with others, people tend to follow me and ask for my advice. I am very straight forward and I can keep people around by making the work day more interesting and solving a lot of turnover problems before they begin. I was taught this by my father, and has helped me gain many friends.
I watch over my other co workers, my motto is safety can always be improved. I have every good writing skills, and enjoy teaching people new trades. I always have the company's best interests on the top of my mind and always look for improvements, time is money.
I have loads of computer experience, while working for Butler I was also enrolled at South West Texas University my major was computer science; my minor was computer information services. After leaving college and Builder, I never perused it further. I do as a hobby design web sites and write electronic repair manuals. I constantly learn new programming languages and as of now the sites I operate pay the bills. I have also come of age so to speak, I'm now 35yrs old, I have had lots of opportunities in my life to go out and make a few mistakes, dealings with all kinds of people, I have become very electronically and mechanically inclined, I always listen to people that have more skills than I. I strive for perfection, both out of myself and install this into my co-works. When I work for a business that business does well, I believe a job worth doing is worth doing right, customer service is key, and in a lot of situations the after care of customers is just as important as the building for that relationship.
I believe I have a lot to offer a business that uses the skills mentioned above. If that business is Safety orientated, well organized, sets goals and always tries to improve it's day to day operations would win me over.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 7651 to 7700 of 15508)Go to Search Parameters...
Brief Description
i have one year experience iin leading post tensioning company . I have completed B.E civil Anna university Chennai. I have skill set in AUTOCAD, STAAD.Pro,ADT ,MS Project
18 Years of experience in Electronics & Instrumentation field at supervisory level in Construction & Maintenance, including 3 ½ Years of Gulf Experience. Known for superior integrity, accommodative nature, sincere & honest team member.
In June 2003, I completed Diploma in Mechanical Engineering from M.S.University, and recently I passed NDT LEVEL II Examination from FLAWTECH INSPECTION SERVICES. And I have 3 years work experience in mechanical field.
strong drilling, geological, petrophysical, coring/core analysis, OH/CH log interpretation & reservoir studies background,worked with Halliburton,Reslab,QP & Schlumberger,Involve in Operations/Well Site/Petroleum Development,reservoir characterization,Image analysis, FMI/OBMI/MSD,Mentor &training
Senior Welding Inspector
ROV Pilot/Technician with two years experience on workclass ROV
Well experienced Financial Director with CA(SA) and Masters Degree in Accounting. Vast African and International experience. Was in charge of 18 African operations in 10 countries. Gets the job done within deadlines. Very accurate and technically astute.
SKILLS: Pipefitting and related works.
drafting 3D and 2D modeling and design of some plans from field work, mechanical, structural in different applications such as Cadworxs P&ID 2009, Cadworx Plant 2009, Autocad 2008
Completions Engineer, Mechanical Engineer, Technical Sales Representative
Piping designer
Skilled in Electrical and Instrumentation Systems, associated with sensors, machines, electrical generating units and switchgear systems and programing and applications of PLC, DCS
Experienced Oil and Gas HSE professional
Steward, Strong Organized Working Foreman, CNC Operator / Programmer, Fitter/Welder, Iron Worker, Millwright, Shop Machinery Operator, Material Handler / Inventory Auditor, Maintenance / Repair Technician, Entry Level CAD Draftsman Computer Tech, Network Administrator
I am an Italian naval architect. I graduated from The University of Genoa specializing in Marine engineering and naval architecture
Bachelor in Chemical Engineering (Co-op option) (University of Ottawa, Canada) Hard worker, enthousiastic.
Looking after Maintenance and repairs of Heavy Earth Moving Equipment, Construction Equipment and Commercial Vehicles
Mechanical Engineer,Planning in primavera for projects , Designing in solidworks,Pro/E , Analysis in ANSYS
Major Course Work: Process Heat Transfer, Chemical Engineering Plant Design I, II, and III, Kinetics and Reactor Design, Process Dynamics and Control, Mass Transfer, Unit Operations, and Chemical Economics and Design
Exp.Mechanical & construction manager in Oil & gas , more that 26 years of work with big oil companies.High educated with MSc in Mechanical and offshore engineering from Robert gordon Uni /Uk.
7.5+ years of Control System Enineering experience with Global Control System leaders(INVENSYS-TRICONEX IPS/FGS,YOKOGAWA Prosafe ,CS3000,HIMA-IPS,EMERSON-DELTA V Systems)
A capable, enthusiastic computer engineering major with on-site experience as Assistant Material Coordinator at IANUA S.P.A Engineering and Contracting Company for Glass Production.
I am highly motivated Geologist / Geoscientist with degrees in Science (Earth Science: Geology) and Geomatic Engineering (Honors) from Melbourne University.
As a Instrument supervisor to lead the work crew and holding the responsibility to complete the job with standard ¡§HSE¡¨ practices as per the strict ¡¥Shell¡¦ safety norms of Petroleum Development of Oman. And also involved in Installation, calibration, loop checking, Pre commissioning, etc..
Cementing Engineer
holding 3 yrs diploma in hotel management and catering technology with more than 8 yrs exp. in catering field
Working in QA/QC
3 years diploma in mechanical engineering
LAND SURVEYOR
Currently working in the North Sea as a Slickline Supervisor on an Ad-Hoc basis.
MicroStation 3D Modeler
PDS &piping drafter
B.Tech Chem engg + MBA (marketing) with 10+ years in Project Management in O&G / Petrochemical Projects
QUALIFICATIONS : M.Sc. (Geology), Skill : Geologist, Mudlogger, Geotechnical Engineer
Good knowledge of Environmental Impact Assessment (EIA), HAZOP, Risk Assessment, Safety Audit, Environmental Audit, & Various Safety Techniques Like; International Safety Rating System (ISRS)-By DNV, Process Safety Management (PSM) etc.
Graduated Mechanical Engineer,Certified Caterpillar Engineer, Experience as a Field Engineer in the Gas & oil, Marine,Mining Industry
M. Sc. Environmental Technology (specialization in Environmental Engineering) , Wastewater treatment (Aerobic and Anaerobic process), Water disinfections, Air pollution measures and solutions (sound level measurement, air monitoring and air emis
Knowlegeable on 2D&3D AutoCAD Drafting, ArchiCAD, Vectorworks, Photoshop, Office Apllication, - Word and Excel, Outlook , Internet, Manual and Computerized Rendering, Mechanical/ Conveyor Technology (as per ASTM, ISO, JIS, and Other Drawing Standards), well versed on the English System Units.
13 years of Experience in DCS System, PLC & ESD system as well as field instrumentation.
Ph.D. in materials science and engineering, four year experience in teaching, five year experience in working in various industries. Fields of specialty; corrosion, coating, materials selection
Geophysicist. Current area - Exploration Seismology. Strong experience in Geophysical Data Processing, Theory of Polarization Anomalies, Numerical Modeling.
Looking for a position with your company in Il. I have 20+ years in the mining industry. I have been a face boss- shift mine manager and general mine manaqger.
Electrical Project Manager 20+ years experience
* Over 11 years of experience in areas of Process Automation Engineering & Instrumentation.* Hands-on experience in Automation Engineering, estimation, design, installation & maintenance of equipments in India & Abroad.Expertise in advanced PLC, systems & providing technical support on Instruments.
ISP, NOC, NETWORKING, VSAT, BROADBAND, SATCOM, CCNA, MCP, MCSA, VOIP
M.A.(English) DELHI UNIVERSITY (NCWEB) Hansraj College; Advanced Certificate Programme in Computers(languages learnt C, C++ and Basic) from ZedCA, Bareilly. Certificate Course in French Language from Alliance Francaise, Delhi.
adaptability, flexibility, coputer knowledge
Master Operator with exceptional work ethic.
MapInfo professional 6.0, 8.0, 8.5,,Schema BTS Ultima,TEMS investigation 3.1, 4.1, 5.1, 6.1.3 Agilent, Nemo for drive test (Data collecting tools
DEsign Engg., PLC, SCADA, I&C work Experience
First   Prev   151   152   153   [ 154 ]   155   156   157   158   159   160   161   162   163   164   165   166   167   168   169   170   171   172   173   174   175   176   177   178   179   180   181   182   183   184   185   186   187   188   189   190   191   192   193   194   195   196   197   198   199   200   Next   Last
Seach Parameters

Goto Advanced Search...
Keywords: (e.g. mining engineer)Find results with:
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com