Resume - I have been involved in Health, Safety and Environment in excess of 25 years and...

Misco Jobs

Resume #82997

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS: H.N.D. in Construction Management
National Certificate in Occupational Safety and Health (NEBOSH)
Petrochemical & First Aid Examinations
Breathing Apparatus Trainer
HS and SO Trainer
Fire Prevention Officers Certificate
Emergency, Crash and Rescue Certificates
Off - Shore Survival Certificate
Off - Shore Medical Certificate
Off - Shore First Aid Certificate

AWARDS: National Bravery Award with Distinction from the Society for the
Protection of Life against Fire.

EMPLOYMENT HISTORY: -

March 2008- December 2008 OGER CONSTRUCTION DUBAI UAE.

Projects HSE Manager.

Responsible for the Safety and Health for all the projects in Dubai, Oger being one of the largest construction companies in the Middle East, most of the contracts being high rise residential and commercial buildings. My duties involved the day to day running of the safety department, implementing the safety plan, co-ordinating training, safety awareness on the sites and all legislative polices regarding UAE mandates

November 2005- Jan 2008 MUSHRIF CONSTRUCTION LIMITED KUWAIT.

HSE Director.

Based in Kuwait as HSE Director for one of the largest construction companies in the middle east, my position being in charge of the companies Safety department and responsible for all safety matters for all the projects throughout the middle east, this entailing heavy construction, deep foundation, excavation, de-watering, sheet piling, micro tunnelling and infra structure projects the company was involved in. I was also responsible for the Safety and welfare of over 3000 multi national personnel employed by the company. I also set out the safety targets for the projects, safety budgets and trouble shooting any problems that arose, enabling Mushrif to have an enviable safety record throughout the Middle East.

July 2003- November 2005 FLUOR INTERNATIONAL.KUWAIT
HSE Manager

Employed by Fluor International on the rebuilding of damaged facilities and upgrade of the Gas Gathering plant in Kuwait for the Kuwait Oil Company. My duties involve advising the Construction Management Team on the preparation, promulgation and review of the project construction phase safety plan, legal requirements affecting HSE. Establishing field procedures within corporate policies, assessment of sub- contractors through pre- qualification procedures, co-ordinate submission of all project HSE submittals to client, write and review site procedures, risk assessments and method statements, maintain the construction sections of the HSE plan, Initiate Safety meetings. Initiate Project inductions, training, counselling, performance appraisal and safety personnel relations

August 2002 – June 2003 MACGREGOR ENERGY SERVICES. KHARG ISLAND IRAN.
Safety Manager.

Employed by Macgregor Energy Services and seconded to KCA Deutag on Kharg Island Iran, my duties involve overseeing of safety procedures on two rigs, this includes responsibility for expatriates and Iranian nationals from the construction phase through to drilling operations My main remit being all health safety and welfare of personnel both on-shore and off-shore, evacuation procedure training, H²S and SO² training, B A training, site inspections, risk assessments and the attendance of all safety meetings, I also carry out all inductions, Tool Box Talks and working in compliance with the client, Total Fina Elf Iran.

January 1999 – JULY 2002. INTERSERVE INDUSTRIAL SERVICES, B.P. GRANGEMOUTH. UK.
Project Safety Manager.

Employed by Interserve Industrial Services as project safety manager for the Fabrication workshops / maintenance division. This being a large Petro-chem Site. My duties involve the day to day running of the safety department arranging safety meetings monitoring and training while maintaining the company Health and safety documentation and working in conjunction with BP / Amoco and Interserve company policies.
While at BP Grangemouth I was involved in the Kinneil boiler re-tube shut down and the shut down of the Hydro-Cracker unit.

June 1997 - December 1998 ROBERTSON ENGINEERING, ENI-CHEM GRANGEMOUTH. UK.
Safety Advisor

Dealing with safety audit, risk assessments and general safety procedures including the implementation of the safety file in conjunction with the current C.D.M. Regulations.

August 1995 – April 1997 U.K. CONSTRUCTION BP REFINERY GRANGEMOUTH, UK.
Safety Officer

Worked on the refurbishment of the Ethylene plant, responsible for all the Safety procedures, risk assessments, inductions, and setting up the project Safety procedures, training of personnel in all Safety related matters, worked in conjunction with the rigid safety demands of BP refinery policies

August 1993 - July 1995 FULL-TIME H.N.D. COURSE in CONSTRUCTION MANAGEMENT

January 1993 - June 1993 AMEC CONSTRUCTION, BP REFINERY, GRANGEMOUTH. UK.
Safety Advisor

Worked on the refurbishment of the Hydro- cracker, my position entailed working in conjunction with the Site Manager, dealing with safety procedures, audits, risk assessments etc.

Dec 1982 – December 1992 WACKENHUTT UK LIMITED, TABUK AIRPORT, SAUDI ARABIA.
Fire / Safety Officer

Worked in all aspects of aviation fire fighting and fire prevention giving full coverage to all aircraft (Civil and Military) using the airport.

June 1980 - November 1982 BP REFINERY, GRANGEMOUTH. UK.
Fire / Safety Officer

Dealing with BP Super tankers berthed at the BP Jetties and gas tankers using the LPG Depot. Ensured that the rigid safety procedures required in an oil related complex were up to, but mostly well above, the required standard. Worked with all the emergency services in initiating and carrying out the Emergency /
Disaster Programme laid down by Government rules, should an
Emergency arise

April 1973 - May 1980 CENTRAL REGION FIRE SERVICE.
Leading Fireman

Leading fireman for the Local Authority Fire Service. Worked in all aspects of fire fighting as Driver/Operator and Fire Prevention Officer.
This included all structural, airside and landside facilities and utilities. Involved in all aspects of fire fighting, driver operating, equipment maintenance, breathing apparatus and truck overseer, responsible for always having equipment ready for emergencies.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8701 to 8750 of 15488)

Go to Search Parameters...

Brief Description

Mechanical fitter, Snr SHE Officer & Mining Eng 2nd year Honours Degree at Leeds University

detail drawings to be prepared from design drawings or from the data available as per site or workshop or offshore, civil steel structural, fabrication, electrical and drainage piping design works experience in India and Saudi Arabia for bldgs, strl towers, elect control panels, factories, furnaces

A results-oriented professional with experience planning and directing executive-level administrative affairs who combines strong planning, organizational and communication skills with the ability to work in an extremely fast-paced environment

Analytical Thinking , Technically Sound, Good Negotiator, Innovative

10 years of experience as chemist with exposure to most modern methods of analysis

chemist, corrosion eng, oil and gas fields

To obtain a Technician, Operator, or Specialist Position.

Objective I am looking for an environment that provides a challenge and growth opportunities. My ideal company would utilize my 15 years of experience in all aspects of the mining industry.

Over 16 years of total experience in the industry of which 8 year’s industrial experience as Chemical Engineer. This is backed by 8 years of experience of implementation of Intergraph’s Plant Design System (PDS) software. The domain of PDS expertise comprises of piping and structural modeling, extra

With a proven record of exemplary senior management, and delivering efficient and productive operations strategies within corporate environments, I am seeking to utilize my comprehensive experience with an innovative and high growth company.

Design/Detail engineering, inspection , erection & commissioning of Oil & Gas Plant,Agro-Chemical industry, Refinery, Pharmaceutical industry involving PLC & DCS system, fire alarm system, access control system, CCTV system ,Public address system, local control panel & field instruments like pH met

6+ years of experience in Reservoir Engineering and Oil Industry.

Drilling specialist and Mech. diesel fitter

Experienced Civil / Structural Engineer

Responsible for on and offshore site planing for well testing operations job logistics and personnel movements. Working in a wide range of environments and positions around the world. Responsible for the safety of the crew, the accurate reporting of operations and morning reports, preparing the corr

Over 20 years experience

Wireline Operator/Supervisor

9 yrs of experience in people management, time management coordination.

I have 18 years experience in the Oil Service Industry, involved in all aspects of Coiled Tubing, Nitrogen Services, Fluid Pumping, N2/He Leaktesting(HLD), Pipeline Pigging/Testing & Well Testing. My last permanent position was Service Supervisor II for Halliburton Coiled Tubing in Australia. Since

25+ years experience

20+ years oilfield experience, excellent work ethic - personal skills - time management, own truck with commercial insurance and plates, current tickets

Inspection Coordinator / Welding Inspector

Technical skilled person for supervising piping /construction projects

A state Engineer in refining

30 years experience in the pipeline field, which includes- bidding jobs, safety procedures, quality control, facility installation, environmental knowledge, welding procedures, know procedures for filling out ground disturbance, hot and cold safe work agreements and confined space entries

CNC programming, unigraphics NX4/5, Catia V5, Autocad

I am a mig welder that is a harder worker that is willing t o learned new skills to become a better overall welder.

I have a degree in bachalor of engineering, in mechanical engineering discipline. i will be able to perform effectively if i am being taken

NDT Level II - UT / RT / MPT & LPT - Sr. NDT Tech.

Design, collaborative Industrial design, product development, rapid prototyping, surfacing, drafting, Pro/E, Solidworks, plastics, sheet metal, die cast, machining, weldments, tooling, GD&T, analysis, concepting, presentation, project management tools, materials sourcing, costing, vendor interface

Experienced Opito Level 3 offshore rigger with additional safety and working at height training.

Construction Manager with 22-years experience in Mechanical Construction discipline for Industrial Projects (Oil & Gas, Refineries, Petrochemical Project and Power Plant Projects).

I hold a BSc in Engineering and have extensive experience in procurement and contracts activities in the upstream oil and gas projects. I seek an employment in the Middle East region as Senior Procurement /Contracts Engineer.

Engineering manager, Planning, Contracts and administration. Production engineering a specialty.

Sales Management Executive providing leadership in hiring, directing, and motivating a sales force consisting of direct / indirect channels in the pursuit of increasing revenue, profitability, and market share.

MAINTENENCES MANAGEMENT OF HEAVY EARTH MOVING AND CONSTRUTION EQUIPMENT

Experiance in Detailed engineering, System Engineeering (PLC ,SCADA,DCS) FEED study, instrument selection, BOM preperation, Hotcutover, start up and commissioning, engineering and feild engineering

Autocad programming(VB, Visual Lisp, AutoLisp), Database, Report Generation (Crystal Reports, Active Reports)

I am a construction engineer having experience of more than 3 years in multi storey building construction

PDS Modelling, Microstation & ACAD 3d Modelling

Bachelor’s degree in Mechanical Engineering passed from N.E.D. University of Engineering and Technology Karachi in the year 1998

5 yrs extensive training and experience in PDS-EERaceway and Microstation, 8 yrs in Autocad

With 5 yrs experience, Chevron Indonesia, as a Petroleum/Reservoir Engineer. Activities include EOR optimization, reserves estimation, depletion plan, project management, reservoir surveillance, workovers, drilling programs, and artificial lift optimization.

M.S in petroleum geology and petroleum engineering. years working experience in reservoir characterization, formatioin evaluation in industry. knowledge in reservoir simulation, prduction and drilling engineering.

Power Station Chemist in the Philippines with experience in power plant desalination and ultrapure water treatment, corrosion issues, water/steam purity control, fuel gas and oil chemistry and engineering projects related to power plant chemistry.

I have completed my graduation in Computer Science. Have worked with Bell Canada as a Tech support Customer Representative. Right now working in a telecommunication Industry for Sony Ericsson as Software engineer.

engineer with excellent telecommunication knowledge

i am structural civil engineer from algeria and i have 9 years experience in such field, i speak and write both french and english

I have been involved in Health, Safety and Environment in excess of 25 years and I am an experienced and qualified Health and Safety Professional in a Construction, Oil /Gas, Drilling Off-shore and On, Aviation and Petrochemical environment. This has enabled me to undertake the following:

Chemical Engineer

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 [ 175 ] 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out