Resume - I have worked in the Oil & Gas industry for over 20 years

Misco Jobs

Resume #83068

CONTACT INFORMATION:
View contact information...

Work History
5/08 to 1/09 Scientific Drilling OKC, OK
Directional Driller
Duties: * Read well plan to determine path and parameters'
* Figure build rate needs and slide accordingly
* Supervise driller while sliding to ensure tool face stability
* Monitor Motor and other DH tools for failures
* Prepare Daily reports for the Customer's representative utilizing a WinServ application.

3/06 to 5/08 Unit Drilling OKC, OK
Driller
Duties: * Supervise crew.
* Operate rig as safely and efficiently as possible
* Maximize ROP by maintaining constant watch on bit and changing variables
* Assign duties to my employees. Keep track of Parts and Oil inventory and report to
Toolpusher
* Train new employees how to use the equipment safely
* Cross train employees for advancement

9/00 to 2/06 Nabors Drilling OKC, OK
Driller / Toolpusher
Duties: * Drillers duties were same as above
Toolpusher:
* Supervise drilling crews
* Schedule maintenance to minimize downtime
* Fill out morning reports
* Conduct inspections and report them to district office
* Train employees to start and for advancement
* Maintain a working parts inventory to have enough expendables on hand
To take care of repairs but not too much to go over R & M budget utilizing an
Online Oracle database.
* Maintain time records of the employees
* Keep moral high and safety fresh on every ones mind

6/99 to 9/00 Trinity Trailers Boise, ID
Welder / Fabricator
Duties: * Fabricated rear doors
* Built maintained conveyor shaft inventory
* Utilized Mig & Tig welders

5/98 to 6/99 Bayard Drilling OKC, OK
Derrickman / Driller
Duties: * Mixed drilling fluid
* Maintained all mud equipment
3/98 to 5/98 Triad Drilling Woodward, OK
Driller
11/97 to 2/98 R & B Drilling Houston, TX
Floorman
9/96 to 10/97 Triad Drilling Woodward, OK
Derrickman

1994 to 1996 Various Drilling Contractors
All of which are owned by Nabors
1982 to 1994 Self Employed
Contract Pumper
The requirements of this were going to the wells on a daily basis to make sure they were still running, to troubleshoot and repair if they were not. Read sales meters and gauge stock tanks. Fill out 8-day well production reports.

References
Will be provided

Education
Anadarko High school 1985
Oklahoma University Well Control School 1998, 2000, 2002
WCS Well Control School 2004
Randy Smith Leadership Training 2001
Driller Tech School 2002
DuPont S.T.O.P. 2001
Safety courses in rig safety

Interests and Hobbies

During the infancy of home PC's knowledge and skills were obtained to build optimal computer system. (Require matching internal hardware components, Motherboards, CPU, Memory, Video Cards, Hard Drive, etc…) Numerous systems were built for home and business purposes. My knowledgebase extends to Microsoft Word, Excel, and Power Point; also familiar with Microsoft operating systems since Windows 3.1.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1651 to 1700 of 15512)

Go to Search Parameters...

Brief Description

Sr. Civil Structural Designer

B. Com. 16 years of experiences different construction materials such as soil, aggregates, concrete & asphalt laboratory & field test & Prepared test reports by using computer.

MC Driver and Chef

Working as Well Site Geologist for Oil Field Instrumentation, India. Our client is MEDCO international an Indonesian company. Presently I am working in Oman. I have worked in the following fields of Oman: Simsim, Warad, Basma and Irad.

Maintenance Welder/Fitter with strong background in Plant Maintenance

PANEL AND FIELD OPERATION

CAREER SUMMARY : Vast experience in the field of industrial piping, i.e. petrochemicals, fertilizer, synthetic fiber, refinery, polyester and pharmaceuticals industries. Main responsibilities includes - model review, piping designing, supports, drawings checking, site survey and coordination.

I have worked in the Oil & Gas industry for over 20 years

HSE Manager with international experience. Nebosh certificate.

My career objectives, strengths and experience in the workforce I am a skilled, experienced and respected heavy equipment mechanic with substantial experience onshore & offshore Australia and overseas particularly here in Asia.

Experience in Supply and Demand Planning, Customer Service, Logistics and Purchasing

I am actively seeking a production management opportunity in a demanding, fast-paced multi-tasking environment, where I can provide critical management with a multitude of skills, and I would like to continue my growth with in your company.

20+ years exp. in survey and valuation, mines rescue services

Land Surveyor , Autocad Tech.

Senior Health, Safety & Environmental Practitioner and Trainer

Drilling Supervisor / Drilling Foreman / Comapany Man/ Drilling Engineer

GIS Project Manager

Working in the North Sea in UK, Norwegian and Dutch sectors. Projects for Seafox 4,Sean P, Clipper, Britania,Transocean Leader, Transocean Winner, Deepsea Delta, Njord A, Troll A B C, Ocean Vanguard

Client Representative QC navaigation,

Snr Completion's & Well Intervention Supervisor

Production ,Operations

Over Sixteen Years of OSP/ISP Site Inspector/ Configuration Controller Experience in Saudi Arabia with Commercial, Civil and Govt.

electrical /instrument superintendent

Having Technical qualification and more than 14 years experience Offshore - oil gas and Refinery experience looking for good oppertunities.

I did my diploma in mining engineering from schools of mines , kolar gold fileds, board of technical examinations, karnataka, india. 30 years experience in underground field.

Planning & Project Control

Experienced Construction Superintendent / Manager Residential / Commercial

Electrical/Instrumentation. Design, supervise, commission and maintenance. 44 years experience. Tech Cert. T3, Nat.cert electrical N5, Prod. Mgr. Dipl. (4year). SAMTRAC,ITIS(Safety certificates, licence to train).etc.

Able to make piping design from conceptual to detail design and field engineering work( see career summary on my resume)

CATIA V5 (1600 Hours), Kaizen/Kanban - Continuous Production Improvement, Lean Manufacturing/Six Sigma, Microsoft Office Systems

Senior Paint/Coatings ; Offshore & Marine New Building

Experienced Well Services, Completion, Workover, Wireline and Well Test Supervisor. 26 years Otis Eng. Corp and Halliburton. 7 years free consultant. 2 1/2 years Bapetco/Shell, Egypt.

Mr. Bipradas Rajbongshi is a specialist in the field of Geotechnical Engineering. He has 20 years experience in technical and managerial roles.

QA/QC Engineer-International projects-Oil&gas industry

Highly motivated, energetic, hardworking, result oriented QA/QC professional, with Master of Science (Chemistry) who is well organized, flexible and determined to exceed performance standards. Offer a broad technical background with 22 years of profound petrochemical experience.

I have 14.5 years of experience in the field of instrumentation/control system engineering for Oil/Gas industry. I have served with Reliance Industries Limited (A Indian largest Oil/Gas/Petrochemical Company ) & and SABIC (A Saudi Arabia largest Oil/Gas/Petrochemical Company).

Mechanical & Electrical Engineering Manager in PT. Muara Manggalindo since June 2007 until now.

More than 15 years of comprehensive knowledge and experience in the field of electrical and instrumentation engineering. Over 12 years of involvement in inspection and construction of Oil & Gas, Petrochemical, and Utilities Plants. Have good knowledge in implementation of SHELL DEP (Design and Engin

Pre-commissioning, commissioning, de-commissioning & Re-commissioning of Hydrocarbon tanks/LPG bullet/Double Wall Ethylene tanks & hydrogen bullets(150 kg/cm2) for statutory inspection ,Gas Turbine commissioning, Safety measures in Hydrocarbon storage, loading & handling system, SAP Operation

More than 15 years total experience on combined field in construction, inspection, engineering project management, commissioning and maintenance of instrumentation and control on gas and oil production facilities, geothermal, power, petrochemical and oleo chemical refinery plants. Extensive knowledg

Analyst/Technical Assistance for reservoir/production operations

I have extensive experience as a process engineer in refining and oil production that I would like to put to use in a technical service or economics and planning management position.

Chief Engineer/ Barge Mechanic with work experience more than twenty years incl. 8 years of Offshore (Juck-up's - 5 years). Education: Maritime Academy (five years course). CEng, MIMarEST.

A Senior Contract Specialist with 25 years international experience on most types of construction/engineering projects worldwide.

Vast experience in Well and Reservoir Surveillance, Integrated Reservoir Studies, Integrated Production Systems Modeling, Well Optimization Production Engineering and Hydrocarbon Accounting. Proven record of accomplishments in deepwater production operations in the U.S. and West Africa

Electrical Engineer

Sr. Geologist / GIS Analyst / Mine Geologist / Structural Geologist

Twenty-Eight(28) years of progressive experience in Piping Design with function relevant to all aspects of Font End Engineering and Design, Plant Layouts, Piping Layouts, Isometrics, Material Take Off, Stress Analysis, Procurement and Preparation of Specifications, Plant Modifications, etc.

Experienced production supervisor

Observer / Senior Observer /Chief at Schlumberger -WesternGeco International Resources ( WGIR Libya 3 D Projects ) with Sercel 408 UL CMXL /428 Recording instruments and VE432/64 vibroseis electronics using source navigation

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 [ 34 ] 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out