Resume - I have 4 years exp in Oil & Gas Industries as an Electrical Maintenance Engineer...

Misco Jobs

Resume #83354

CONTACT INFORMATION:
View contact information...

4.1 Years experience in Operation & Maintenance of Electrical Equipments. Currently working with Essar Oil Ltd –As an OFFICER in Electrical Maintenance department.

DEGREE: B.Tech (ELECTRICAL)

DATE OF BIRTH: 19TH JUNE 1986

NATIONALITY: INDIAN

LANGUAGE KNOWN: ENGLISH (Read, Write & Speak)
TAMIL (Read, Write & Speak)
HINDI (Speak)

PASSPORT NO/DATE: HO233221 Validity Sep-2018

PERMANET ADDRESS: 371-3/36 Ramakrishna Nagar,
Periya Nayaken Palayam,
Coimbatore - 641020. Tamilnadu

PRESENT ADDRESS: FLAT NO E-19
Nandhinikethan, ESSAR Town Ship
Jamnagar 361006, Gujarat

Email: dinesh_1506@yahoo.co.in

Personal no: +91 98252 05142

Seeking a challenging position with safety in the Oil/Gas and Energy Industry that would make the best use of my knowledge acquired in my experience with Essar Oil Ltd.

Sr.No
COURSE
NAME OF INSTITUTION
%OF MARKS
YEAR OF PASSING
1
B.Tech in Electrical Engineering
RVD University, Rajasthan
66.5%
Aug 2008
2
Diploma in Electrical & Electronics Engineering
Sri Ramakrishna Mission Vidyalaya,Coimbatore-20
93.5%
Apr 2005
3
HSC
SLNM Hr Sec School, Coimbatore-58
72.8%
Apr 2003
4
SSLC
Thamu Hr Sec School, Coimbatore-19
82.8%
Apr 2001

Programmable Logic Control (PLC) In PSG College of Technology.
Printed Circuit Board (PCB) In PSG College of Technology.

Campus recruitment, Essar Oil Limited May 2005. Around 4.1 years of experience in Project Execution & Maintenance of COT (Crude Oil Tankages) Area Electrical Systems.
Maintenance (Preventive Maintenance, Condition based Maintenance & Breakdown Maintenance) & Operation of HT/LT Motors up to 6.6kV, HT/LT Switch gears up to 33kV, Power/Distribution/Lighting Transformers up to 10MVA, Battery Chargers up to 17.5KVA, Battery Banks up to 250Ah, Cathodic Protection Systems on tankages & Pipe lines, MoV's and Heat Treasing Systems.
Handling & Trouble shooting of electrical equipment like LT & HT motors, HT & LT Switch Gears, Power transformers (up to 10MVA), MCC, PCC, Battery chargers, Cathodic Protection systems, Motor Operated Valves and Heat tracing systems.
Commissioning and Maintenance experience of HT & LT Switchgears, Power transformers (up to 10MVA), MCC, PCC, Battery chargers, Batteries, EOT Cranes Package Units, Cathodic Protection systems, MOV's and Heattreasing system and HT & LT Motors.
Shutdown Maintenance experience of Transformer overhauling up to 16MVA, HT (VCB) Breaker overhauling up to 33kV, LT (ACB) Breaker overhauling (MAKE – Siemens, CGL & L&T).
Enhancement and Modification of 16MVA transformer to 20MVA transformer.
Working with Power system protection equipments such as circuit breakers (SIEMENS VCB & ACB), Microprocessor Based Numerical Relays & electro-mechanical relays (MAKE - GE, ABB & SIEMENS)
Testing experience in Commissioning and Pre-Commissioning of various electrical equipments like HT/LT Motors up to 6.6kV, HT/LT Switch gears up to 33kV, Power/Distribution/Lighting Transformers up to 10MVA, Protection Relays ((MM30, MOTPRO and MCGG Thermal relays (BMR), TAN Delta for HT Motors, Partial discharge (PD) test of CT & PT, BDV test for Transformer Oil and Circuit breakers (SIEMENS, CGL and L&T).Battery Banks up to 250Ah, Cathodic Protection Systems on tankages & Pipe lines, MoV's.
Preparing maintenance schedule for transformers (Power, Distribution, Lighting), Motors (HT & LT), Panels (HT, LT and Lighting) through SAP system.
Preparing SMP & SOP for various electrical equipments,Preparing scope for Maintenance, Testing and services of electrical equipments. Identifying and Preparing CAPEX Budget for system reliability improvement.
Knowledge in electrical system studies, single line diagrams, block flow diagrams, power management systems and microprocessor based relays & protection system.

Cathodic Protection System.
Knowledge for Impressed current and sacrificial anode type cathodic Protection
Maintenance and trouble shooting of Cathodic Protection.
Knowledge about AJB, CJB, TS, TRU, Reference Cells, CTSU (Computerised testind station Unit), Data logger and Plam.

As a Maintenance Engineer.
Operation and Maintenance of plant electrical equipments.
Coordinating with operation and other service department and executing requirements of operation department.
Executing job with all necessary safety equipments and trained technicians (Before starting any job, Tool Box Talk and One Point Lesson shall be given to technicians).
Attending plant safety, ABC (Area Business committee) and Plant reliability Meeting.
Attending safety training and Technical training (In-house & Outdoor)
As a Planning Engineer.
Ensuring & implementing Contractor safety management system.
Developing & implementing the system for tracking & reporting the monthly budget by indicating major & non budgeted expenditures.
Maintaining & Generating Revenue & Capital Expenditure reports.
Effective planning & monitoring of procurement of services for shutdown activities within stipulated time frame and cost
Preparing various formats, SOP's, SMP's, RA Sheets (Risk assignment) & checklist and arranging to get final approval.

Obtained appreciation letters stating "Performance Significantly Exceeds Expectations" from the head of the refinery for my performance during appraisal year 2006/07 & 2007/08.

Trained in "RELAY SETTING AND CO-ORDINATION".
Trained in "HT & LT Motor Protection and Maintenance".
Trained in "Inventory and Material Management System".
Undergone Industrial Training in "salzer Electronics Ltd", Coimbatore /Tamilnadu.
Undergone Industrial Training "Bharath Machine Works", Coimbatore /Tamilnadu.

OS - WINDOWS 95, 98, XP, PROFESSIONAL
SAP ( MM and PM Model)
MS OFFICE ( EXCEL, WORD, POWERPOINT, ACCESS )

NON-CONVENTIONAL ENERGY USING FOOT STEPS (Diploma final year project, the same project has projected in state Level Project Exhibition at Sri Ramakrishna Polytechnic, Vattamalapalayam and got a 2nd Place)

HARMONIC REDUCTION THROUGH PASSIVE AND ACTIVE FILTER.(B.Tech Project)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6051 to 6100 of 15478)

Go to Search Parameters...

Brief Description

Senior Assistant + Engineering Technician with 3 yrs. work experience in Dubai and Building Maintenance Engineer with 5 yrs. work experience in hometown. Autocad 2009 & Revit Architecture software I used at work.

ƒæ Mecahanical Pump,Gearbox,roll,and all,ƒæ Mechanical Install Machine Project ,ƒæ Drafter (2D, 3D, Isometri),ƒæ Preventive, Proactive, Predictive And Corective Maintenance,ƒæ Mechanical Maintenance and Welder,LATHE/Milling Machine,Theodolit Elevasion,Microsoft Office

PIping, PDS, CAD

B.E. Mechanical Engineer with 4 years of Experience in Commissioning and Maintenance of Industrial Equipments in Refinery and Oil & Gas Field.

LOGISTICS, SHIPPING, BILLING, SAFETY OFFICER

I have had experiences for 4 years in wireline operation, drilling and production area. Having good knowledge of Bottom Hole Equipment, mPLT, gauges and other conventional wireline jobs.

Problem solving skills in core Mechanical Engineering and in the area of Structural Mechanics; Ability to handle multiple tasks with good time management skills; Self-motivated, highly responsible & organized, strong written and verbal communication skills, Knowledge of Design Engineering Stres

Oil and Gas Lawyer (Masters Degree)

As the Cost Engineer in one of the leading owner and operator of FPSOs, my main task is to provide effective cost control measures for the ongoing conversion projects. Good interpersonal skill is an important aspect as my role requires liaison with various parties of the hierarchy from

MSHA Qualified Electrician, Part 77.103 since 1993/ Instrumentation/ HVAC

3.5 years of experience in Structural drafting, Structural Analysis and Detailed Structural Design Engineering. Experienced in RISA, Strand7, AutoCAD, MathCAD and X-steel.

Diploma in mechanical engg

Customer support , service engineer, bio medical engineer

Honours degree in Geology/Petroleum Geology, 4 years offshore experience, 3 years as LWD/MWD engineer, valid offshore safety and medical certificates

ME Environmental Engineering and management in One year Exp in Wastewater treatment plant, & my skills is Designing of wastewater water treatment plant,Air pollution control,biological treatment system.

Welding Inspection and also able to perform Welding Engineer job.

I am currently looking for work in the Texas Panhandle region. I have 7 years of experience in the Oil/Gas Pipeline control systems.

Mining Engineer

Field Experience Upstream Production Testing / Logging. Petroleum Eng Background

C,C++,MATLAB,ZMAP,GIS,CRISIS,SIGMA PLOT

Experinced seaman of over 12yrs on boats

RELEVANT ACQUIRED SKILLS Working Knowledge of ECLIPSE Reservoir Simulator and OilField Manager (OFM), Programming in FORTRAN and C++, Proficiency in Microsoft Word, Excel and Power Point Applications and AutoCAD

I have 4 years exp in Oil & Gas Industries as an Electrical Maintenance Engineer. i did B.Tech (Electrical) at Rajasthan University. Now i am working in ESSAR OIL Ltd as a Maintenance Engg.

Coal Bed Methane Drill Site Supervisor

To operate shutting down / starting-up the processing plant assigned to an Offshore / Onshore platform for collection, treatment & inward transmission to consumers of oil & gas. To mix chemicals, prepare the plant for routine / planned maintenance and carry out first line maintenance.

My expertise includes strong hands-on technical skills with ECLIPSE and MBAL software applications. I am highly skilled in EOS fluid characterization, well test analysis, reservoir modelling, manage mature reservoirs, well monitoring

Excellent experience in the oilfield, having worked as Rig Manager for 3 1/2 years , working on Top Drive Telescopic Doubles, scissor sub and Super-single rigs.Good communicator, speak fullest Spanish excellent people skills and works well with others

I am graduated faculty of engineering, stillworking in my Master Thesis, Last position AD on MAERSK ENDURER HPHT Jack-up

I am a mechanical engineer with over 25 years of experience in designing, engineering and field servicing of various types of mechanical equipment.

I am a Static Equipment Design Engineer with %+ years experience. I have work experience in Both static and Rotating equipments. Ihave strong exposure to design softwares such as Compress, B-JAC, etc.,

A Mechanical Engineer with 4.7 years of experience in a piping &Pressure Vessel Currently working as QA\QC ENGINEER in M/s KALPATARU POWER TRANSMISSION LTD, GUJARAT

Post graduate in chemical engineering with impressive skills and work experiences seeking a full time position as a chemical/process engineer.

sound knowledge of engineering hydrodynamics, fluid dynamics, working experience with subsea pipelines (marine riser), having received master degree in offshore engineering, seeking an opportunity in the filed of subsea engineering.

Masters in Electrical Engineering with 2 yrs of experience in Electrical Controls & Instrumentation

Quantity Surveyor able to takeoff, variation claims, valuation, computers,caddrawing

Having 14 years of work experience in Ship Building/Repair, Petroleum and Mining industry in both Philippines and Dubai (UAE).Worked as Insulator, Tinsmith, Pipe fitter, Fabricator and CAD Operator for mechanical and structural works. Used AutoCad Software as drafting tool.

Test Engineer

Microsoft office, Auto cad, SAP, Everstress, Winhwy

2 years of Knowledge of the environmental compliance requirement (40 CFR Part 60, 40 CFR Part 71, and 40 CFR Part 75); 4 years of experience working with continuous emission monitoring systems (CEMS).

Oil & Gas Land services

Procuction,project,commissioning experience in chlor alkali industry

journeyman electrician

Diploma in mine survey from the Zimbabwe school of mines. All round surveyor capable of all underground surveys plotting and reports; all surface surveys including all setting out, pit surveys and volume calculations, road surveys,cut and fill calculations using total stations, GPS & automatic level

Landman

Chemical Engineer, Piping, SmartPlant 3D (SP3D), 5+ years of exp.

Fluent in English and Filipino. Knowledgeable in computer and customer service related works. Possessed with proper knowledge, good quality of administrative and banking skills and right attitude. Interests include surfing the net and socializing with people. Goal-oriented, adaptable, determined and

Procurement Engineer with 4.5 years of experience in Procurement of Static Equipments, Packages and Piping Specality itemd for EPC Project. Act as focal point for all Third Party Inspection for all Packages, Piping bulks etc required for EPC Contracts. Also acting as Logistics Controller

Accumulated almost 10 years working experience in Apo Cement Corporation, Cemex, Philippines. Directly involves in operation, inspection, maintenance and commissioning of the following Krupp Polysius AG manufactured equipment: 2 units 170 tons/hour cement grinding tube mill, 2 unit 300 tons/hour VRM

James is a biologist in marine and coastal ecosystems and associated marine issues, as well as geographical information systems (GIS).

DCS Control Room Operation In Hydrogen. LPG MEROX At World Largest Petroleum Refinery In Reliance Industries LTD

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 [ 122 ] 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out