Resume - Graduate Chemical Engineer with 08 years experience in field of Internal Corrosi...

Misco Jobs

Resume #83382

CONTACT INFORMATION:
View contact information...

Job Experience

October 01, 2001 to date

Working as "Application Engineer-II" in the field of Corrosion, Integrity Management and Flow Assurance with Nalco Ltd - Energy Services Division, dealing in Oil and Gas Field Specialty Chemicals Sale and Technical Services to "Oil and Gas Exploration and Production Companies" Since 1st October 2001.

Professional Skills include¡K

A. Corrosion Risk Assessment / Data Analysis Skills

„« Analysis of produced fluid's chemical and physical properties and system conditions (temperature & pressure) for prediction of internal corrosion rate at initial fabrication and drilling phase and use this prediction for selection of most suitable material of construction in oil and gas wells and production system (flowlines and piping).
„« Use of different corrosion models and software to simulate well production data to predict blank corrosion rates.
„« Recommendation and deployment of different corrosion monitoring techniques to monitor internal corrosion rates e.g. corrosion rate by corrosion coupons, ER probes, LPR probes and Thin Layer Activation (TLA) coupon techniques.
„« Recommendation of different corrosion mitigation and corrosion rate monitoring provisions (e.g. installation of sampling points and fitting provision for monitoring devices like coupons and probes) during well completion, flowline and piping fabrication phase.
„« Analysis of produced fluid's chemical and physical properties and system conditions temperature & pressure for prediction of scale deposition tendencies oil and gas wells and production system (flow lines and piping).
„« Use of different models and software to simulate system conditions for scale deposition tendencies in oil and production wells, flowlines and water injection / disposal wells.
„« Design and recommend a comprehensive chemical treatment program to mitigate internal corrosion and inhibit scale deposition.
„« Design, monitor and review the corrosion mitigation program
„« Collection, management and analysis of corrosion rate data
„« Periodic review of corrosion mitigation program on the basis of corrosion rate monitoring data

B. Laboratory/ Analytical skills

„« Procedures and Analytical techniques of different activities related to corrosion rate monitoring program e.g.
* Installation and retrieval of corrosion coupons
* Analysis of weight loss coupons
* Iron counts analysis in produced water
* Calculation of internal corrosion rate from chemical analysis (iron counts)
* Monitoring of corrosion rate by ER & LPR probes

„« Laboratory and analytical techniques involved in analysis of produced and sale crude oil e.g.
* BS&W by centrifugation
* Salinity of crude oil in terms of PTB
* Pour point of crude oil
* Cloud point of crude oil

„« Laboratory and analytical techniques involved in Raw and Sale gas e.g.
* CO2 in gas
* H2S in gas
* Gas analysis using Gas Chromatography
* Moisture contents in gas

„« Different laboratory and analytical techniques involved in monitoring of produced water quality
* Ionic analysis of water
* Testing of dissolved gases in water (dissolved O2, dissolved CO2 and dissolved H2S)
* Total dissolved solids (TDS), Total suspended solids (TSS) and specific gravity, Millipore testing etc.
* Microbial contamination - Testing of sulphate reducing bacteria (SRB) and general aerobic bacteria (GAB) in produced water.

„« Skilled in different analytical techniques for evaluation and recommendation of Chemical treatment e.g.
* Demulsifier bottle testing,
* Pour point depressant product screening and evaluation
* Bubble test for corrosion inhibitor evaluation
* Scale deposit sample analysis.

C. Process Skills

„« Processing and trouble shooting of crude oil at oilfield. The operation involves Crude Oil Production, Demulsification / Desalination, 3P Separation, Sale Crude Quality Control and Chemical Treatment for Integrity Management and Flow Assurance.
„« Operation and trouble shooting of Gas processes i.e. gas sweetening in Amine sweetening plant, wet gas dehydration in Glycol dehydration plant and H2S Scavenging from hydrocarbon gases by chemical treatment.
„« Handling and treatment of produced water to maintain its quality before re-injection in injection and disposal wells.

D. Inspection skills

„« Experienced in visual inspection of stationery equipments (Tanks, Vessels, Plant piping and flow lines) for their physical and operational fitness and integrity.
„« Inspection of pulled out well's tubing during the work over / down hole intervention jobs.
„« Ultra Sonic Testing (UT) to find out thickness and scanning of in service equipments.
„« RCFA (Route Cause Failure Analysis) for the Failures/Leakages in down hole and surface equipment of oil and gas production system.

Core/Current Job Responsibilities

„« Currently working with BP Pakistan and responsible to look after all matters related to corrosion, scale, oil water separation and chemical treatment in BP Pakistan Exploration and Production Inc. to ensure integrity management and flow assurance. Over all responsible for monitoring and control of corrosion, scale and separation issues and monitor and maintain the produced water quality before injection/disposal in all BP Pakistan production operations. JOB Scope includes supervision of all Nalco field based activities leading Nalco Field Team and looking after of new KPI based Chemical Managed Services (CMS) Contract between NALCO and BPP to provide cost effective and quality flow assurance and integrity management solutions to BP Pakistan.

Also responsible for supervision of all activities related corrosion monitoring program including corrosion rate monitoring techniques and corrosion rate data evaluation.

Responsible for inspection and route cause analysis of tubing failure, production flow lines and plant piping leakages.

Has also worked in the same capacity for all other E&P companies (Nalco Clients) in Pakistan like Oil and Gas Development Company Ltd, Pakistan Oilfields Limited, Mari Gas Co., Orient Petroleum In. and Pakistan Petroleum Limited.

Besides above JOB responsibilities also include¡K¡K.

* To enhance sales of Nalco's Specialty Chemicals
* Visit to customer site for system review, data analysis and trouble shooting.
* Monitoring and supervision of all corrosion, scale, oil water separation, flow assurance and chemical treatment related activities.
* To carry out on-side testing and laboratory evaluation for the selection/recommendation of different Oil Field Chemicals.
* Provide after sale technical support to Nalco clients.
* To generate technical and service visit reports.
* To coordinate with Nalco Global Technology Group for technical support in complex situations.

September 2000 to September 2001

Has worked in Olympia Chemicals Ltd. Khushab, (A Project of Light Soda Ash) as "Shift Engineer".

Job Responsibilities included¡K¡K¡K

* Manage and supervise the operation of all sections of the plant starting from Brine preparation to final product shipment including Brine Purification, Kiln, Compressor Station, Ammonia Towers, Carbonation, Calcinations and Packing.
* Optimize and maintain plant parameters to get targeted production.
* Manage and lead production team during the shift
* Monitor and control the product quality
* Trouble shoot and address the operational issues during plant operation
* Manage the maintenance schedule for standby equipments
* Preparation of maintenance plan during annual shut down

September 1999 to September 2000

Has worked in Habib Sugar Mills Ltd. "Trainee Chemical Engineer" and then "Shift Engineer".

Job Responsibilities included¡K¡K¡K

* Manage and supervise the operation of all sections of the plant from cane crushing to final product shipment including crushing, Juice clarification, Evaporation, Crystallization, Refining and Packing.
* Optimize and maintain plant parameters to get targeted production.
* Manage and lead production team during the shift
* Monitor and control the product quality
* Trouble shoot and address the operational issues during plant operation
* Manage the maintenance schedule for standby equipments
* Preparation of maintenance plan during annual shut down

Certification

Certified "The Counselor Sales Person" by Wilson Learning Worldwide Inc. USA.

Member Ship / Registration

Member of "Pakistan Engineering Council" and registered as "Professional Engineer (PE)"

Safety and Technical Trainings

1. Has Passed Nalco's Online Safety Training course "SafeTNet" from "NALCO CORPORATE UNIVERSITY".

Nalco's "Safe TNet" course contains following courses

ƒæ Risk Assessment
ƒæ Respirator Protection
ƒæ Confined Space Entry
ƒæ Driver Safety
ƒæ Fall Prevention (Working at Height)
ƒæ Hearing Conservation
ƒæ Energy Isolation ¡V Lock out/Tag out
ƒæ Personal Protective Equipment(PPE)
ƒæ Personal Safety Management
ƒæ Transportation of Hazardous Material

2. Has passed a course of "Oil and Gas Production Chemistry" jointly arranged by "BP Sunbury and Nalco UK" and sponsored by BP Pakistan and Nalco Pakistan.
3. Has passed safety training to work under "Sour Gas (H2S) Environment" from Gulf Technical and Safety Training Centre LLC. Abu Dhabi, U.A.E.
4. Has passed certificate course "H2S OPITO LEVEL II" from Rutledge E & P Pte. Limited
5. Has passed "Gas Testing Course" from Gulf Technical and Safety Training Centre LLC. Abu Dhabi, U.A.E.
6. Safety training for safe handling of oil field chemicals e.g. H2S Scavenger, Corrosion Inhibitor, Scale Inhibitor, Oxygen Scavenger, Biocides and Demulsifiers etc. arranged by Nalco EMEA regional experts U.K. at Dubai.
7. Got 15 days technical training course for different laboratory test procedures used in oil field testing i.e. Demulsifier Bottle Testing, Pour Point Evaluation, Bubble Test, Time Kill Tests, Tube Blocking Test, Corrosion and Scale Inhibitor residuals tests etc. at "Nalco regional lab Abu Dhabi"
8. Passed "Defensive Driving Course" form "Consult and Train" Karachi arranged by BP Pakistan Exploration and Production Inc.
9. Has passed a 15 days First Aider training certificate course of "First Aid to Injured Persons with CPR" arranged by Pakistan Red Crescent Society at its National Headquarter Islamabad.
10. Has passed "Advance Safety Auditing" course arranged by BP Pakistan Exploration and Production Inc. and is certified as "Advance Safety Auditor" for BPPI.
11. Has passed "Train The Trainer" course arranged by BP Pakistan Exploration and Production Inc. and is certified as "Safety Trainer" for BPPI.
12. Has passed "Hazard Identification and Task Risk Assessment (HITRA)" course arranged by BP Pakistan Exploration and Production Inc.
13. Has passed "Permit to Work System" course arranged by BP Pakistan Exploration and Production Inc.
14. Has passed "Emergency and Spill Response" course arranged by BP Pakistan Exploration and Production Inc.
15. Has Attended a course on "Hazard Recognition and Control" arranged by BP Pakistan Exploration and Production Inc.
16. Attended "First Aid Awareness Refresher Course" arranged by BP Pakistan Exploration and Production Inc.
17. Has attended technical training course of "Process Engineering" at Habib Sugar Mills Ltd. Arranged by "NFC of Engineering and Technology, Multan".

Academic Qualification

* Bachelor of Chemical Engineering from NED University of Engineering and Technology, Karachi, Pakistan in First Division (1999).
* Intermediate (F.Sc Pre-Engg) from Board of Intermediate and Secondary Education, Faisalabad in First Division (1993).
* Matric ( Science) from Board of Intermediate and Secondary Education, Faisalabad in First Division (1991).

Computer Skill

* Has vast experience of using proprietary company owned soft wares for simulations of Oil and Gas wells down hole and surface conditions to investigate and mitigate corrosion and scale issues.
* Has necessary skills in using office soft wares such as MS word. MS Excel, Power Point, Lotus Notes, Microsoft Internet Explorer, Microsoft Outlook Express etc.

PERSONAL Data
Domicile: Jhang (Punjab)
Date of Birth: January 10, 1976
Marital Status: Married

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3051 to 3100 of 15497)

Go to Search Parameters...

Brief Description

I am Chemical Engineer over 18 years of experience in all aspects of combined cycle chemistry, chemical/water treatment operation, quality control and analytical services as Plant Chemist/ Quality Control Supervisor in co-generation power stations. I am a Canadian citizen and willing to relocate.

Project Manager

I am applying for welding supervisor and i have 15 year experiance in welding

Maintenance, Installation, Comissioning, Calibration, and Design And Documentation.

Manager shift Combined cycle power plant

Drilling Engineer, 10 years experience, hpht experience, Casing design, advanced well design, drilling fluids, directional drilling, drilling software,

I have 17 years of experience and presently working with Saudi International Petrochemical Co (Sipchem). I have got specialized Skills in maintenance planning and scheduling work process control, CMMS SAP R/3 PM module, Primavera P3 / MS project, RCM, Development and implementation of maintenance

I am a Civil Engineer and have worked about 10 years in the field of environmental field in verious construction industries in nepal with Multinational Construction Companies.

Geologist with large experience in oil and gas exploration and development-Offshore experience and TDC unit manager and well site

10+ years of experience in the field of GIS & construction industry with wide ranging domain and industry expertise.

I have developed over the years a very good and unique network in Africa and have had a chance to only work for multinational companies and one institutional investor company, business development and expansion, sales, corporate strategy, management are my fields.

Certified Welding Inspector (aged 30 years) with more than 10 years experience (Six years in Saudi Arabia having valid Driving License , Singapore & UAE) Oil & Gas / Petrochemical Projects & Semi-Submersible Rigs, Offshore / Onshore Process platforms seeks a challenging position in Inspection Field.

Performance driven procurement and logistics manager offering 14 years expertise in reducing costs while increasing efficiencies in international production and exploration operations. Builds and leads internationally diverse supply chain teams.

3D models PDS, Smart plant Review, PDMS, Autocad, Miicrostation, isometrics, Orthographic Drawing Production

Having 16 years experience in the oilfield, I am a highly motivated, conscientious and experienced professional with a proven ability to work beyond the parameters of the role and to prioritise effectively to meet deadlines.

PRIMAVERA, M.S Office, AutoCAD-2007

Mud Engineer

Total 12+ years of experience (8 Years in India & 4+ Years in Middle East) in Quality Assurance / Quality Control, Inspection and Welding Engineering from Raw Material stage to Final Stage in Fabrication, Construction, during Shut Down / Maintenance, Repair / Renovation work in Oil and Gas, Petroche

Bsc of mechanical engineering 1994, onshore and offshore rigs expernice, joy stick touch screen rigs

Graduate Chemical Engineer with 08 years experience in field of Internal Corrosion and Chemical treament in oil and gas field.

Post Applied for: Planning Engineer / Sr.Planning Engineer (Primavera and MS-Project).

SOFTWARE SKILL: PRIMAVERA-P3 ,P5 ENTERPRISE , P6 PROJECT ENTERPRISE V.6.0 AND PM+

Directional Drilling Operator,Locator and Site Supervisor.ITI Electronics

Seeking A Challenging Overseas Position in a professional org MSProj & Premevira

BTech in Mechanical Engineering specialised in Designing HVAC systems.........

Geophysicist with more than 20 years experience, out of which 9 years in marine seismic data acquisition, QC, Party Manager & HSE. Good academic background with an M.Sc. in Geophysics and MBA in Admin.Management, with wide experience working in 2D & 3D seismics.

Manager for techno commercial jobs in mining machinery

A highly experienced and versatile project management and professional engineer with over 15 years of engineering and project management experience in the Oil and Gas industries. Extensive experience in various types of oil and gas projects.

Business Plan Modeling, Project Management, Motivational Team Leader

I have twenty five years mining/supervisory experience in exploration,construction,mining, and reclamation. A true professional in my field

Landman work; Due Diligence; Assignment breakdowns; Figuring ORRI, NWI, NRI; Curative;Title research; Title abstracting; Ensuring complince with governmental and enviromental regulations; Acquisitions; Right of way; Leasing; Geophysical permitting; Mapping skills; Extensive computer knowledge

ESTIMATING, PROJECT MANAGEMENT,HEAVY EQUIPMENT OPERATOR, UNDERGROUND UTILITIES

Algerian petroleum geologist with +8 years of experience in the area of petroleum exploration and geomechanical engineering. Looking for an international carrier in the area of petroleum geology or geomechanics

Underground fitter/machinist, with hydraulic experience, and am proficient in all types of welding. Reliable, motivated, self-starter, that is safety oriented. I have great interpersonal skills and work well with others. I go that extra mile to get the job done efficiently.

I have over 22 years in the underground mining industry in all aspect of operations

During 8 years experience in Oil & Gas industry, I was fully in charge of Reservoir Engineering. I have done 3 reservoir simulation jobs , PVT Analysis, Static Pressure Analysis, Transient Pressure Analysis, Reserve Estimation, Material Balance, Decline Curve Analysis ,field job supervisory

Over 20 years managing equipment. Large tunnel, heavy civil jobs and managed jobs across state and states. I have been involved in training and presentations to improve and maintain safety and service. I enjoy a challenge and enjoy reaching goals and working with a team or teams to reach a common go

Management

I would like to continue my career in mining as an equipment operator or a supervisor/foreman. I have worked in or around mines for the last 25 years, the last 5 as a supervisor.

A. Competencies/Skills for over fourteen (14) years of experience in different projects as Crane Operator and Heavy Equipment Mechanic a. ARAMCO-Certified Crane Operator in oil and gas wells for all required works in drilling and rig moving b. Qualified Crane Operator for underground civil works c.

24 years experience in completions and workovers.

Well site supervisor for 4 years specilizing in horizontal, directional, underbalanced, reentry wells.

I am a HVAC /Electrical Lead technician with 22years experience 19 years in Multi-national oil companies both onshore and offshore for production platforms and perform preventive maintenance activities, job scheduling including preparation of JSA with relevant parties .

Electrical Engineer

Metallurgical process supervisor/trainer Experianced on Gold ,Copper and Uranium

I am 46 years old, hardworking and trsupervision. Seeking permanent employment overseas. ie: Dubai.ustworthy. My attendance is 100%, never having had any sick time from my work in 25 years of full time employment. I can use my own initiative, and am able to work without supervision.

Workover/Completion Consultant/Supervisor

Production foreman with twenty years of experience in oil and gas industry.

Occupational Health and Safety Engineer with Industrial Hygiene Background. Worked on Variety of Oil & Gas Project

First Prev 51 52 53 54 55 56 57 58 59 60 61 [ 62 ] 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out