Resume - cfd, thermal, aircraft, turbomachinery

Misco Jobs

Resume #83410

CONTACT INFORMATION:
View contact information...

Technical Skill:
CFD, Aerodynamic, Heat Transfer Design and Analysis on Business Jet, Anti-Icing System and Turbomachinery. Good in C, C++, Fortran90 OpenGL and. Linux system.
Experience

Emivestaerospace Inc. San Antonio, TX, 1996-2009
Senior Engineer

Performed CFD analysis on business jet using overflow, usm3d, Euler code. Heat Transfer analysis on Anti-icing system using Lewice and internal codes.

Performed wind tunnel testing and validation on CFD results..
Developed CFD and thermal capabilities in Emivestaerospace, using OVERFLOW, OVERGRID, Gridtool, Pegasus, Fun3d, Pab3d,Usm3d, PATRAN, Pmarc, Gridgen, Mercury, Tecplot, Plot3d, OpenGL, GUI on window, SGI and Linux computer system
Performed low speed wind tunnel test on SJ30-2 to get takeoff, landing performance.
Optimized gap and overlap for slat and flap for takeoff and landing performance.
Performed high speed wind tunnel test on SJ30-2 to get cruise performance.
Designed SJ30-2 nacelle inlet system, pylon and integrated with fuselage to minimize drag.
Performed vortex generator simulation on wing to reduce shock induced separation
Performed optimization design using CDISC.
Investigated various turbulent models on maximum lift prediction.
Performed engine deck calculation to evaluate its effects on anti-icing system.

Developed critical load for stress evaluation on SJ30-2 flight envelop.
Developed 1g wing geometry by iterated aerodynamic and stress codes.
Performed RVSM (reduced vertical separation minimum) cfd analysis.
Finalized pitot static probe locations by cfd.
Performed icing wind tunnel test on icing shape generation.
Predicted Ice Shape on Radome, wing, unprotected areas.
Design anti-icing system and certify icing system for SJ30-2 business jet.
Performed thermal analysis for anti-icing system on wing and inlet.
Coordinated with aircraft performance group, engine performance group, stress group,weight group, system group, design group, manufacture group and flight test group to optimize aircraft design.

Performed preliminary supersonic business jet design and analysis on wing, inlet system.

Accomplishment:
1.Developed CFD capabilities in emivestaersoapce and performed aerodynamics design, analyze and optimize SJ30-2 geometry to save company millions dollars. Million dollar already spent on outside consultant work which can be done inhouse now.
2. Developed a best and fast business jet by minimized the drag and maximum the lift by aerodynamic design and analysis by cfd.
3. Developed vortex generators on transonic supercritical wing to reduce shock-induced flow separation. It will eliminate the future chance of aircraft crash during flight test.
4. Certified Anti-icing system in-house which save half millions dollars if done by the outside consultants.

Dee Howard Company, San Antonio, TX, 1988-1996
Senior Engineer
Performed CFD analysis and design in Boeing 727 reengine program, S-Duct and Thrust Reverser.
Accomplishment:
Developed a patented S-duct for Boeing 727-100 QF for 50 UPS fleet. The successful program made Dee Howard over $500 millions.
Developed the patented thrust reversers which won almost all the contracts from the business jet industries.

Honeywell (Garret), Torrance, CA. 1984-1988
Senior Engineer
Performed CFD analysis and turbocharger design, analysis, testing, performance and improvement.
Developed turbocharger used for transportation industries. Now Honeywell is the world best turbocharger manufactures.

Taiwan University, Taipei, Taiwan, 1978-1984
Professor in Department of Mechanical Engineering

Pratt Whitney Rocketdyne, Canoga Park. CA 1976-1978
Member of Technical Staff
Performed CFD and analysis on Space Shuttle Main Engine Pump and inducer.
Advanced numerical capabilities in Rocketdyne.

Rolls Royce, Allison Division, Indianapolis, IN 1973-1976
Senior Project Engineer
Performed CFD and Heat Transfer analysis on turbine blade.
Developed CFD and Heat Transfer Finite element codes.

Education:

Ph.D Mechanical & Aerospace Engineering, Univ. of Rochester, Rochester. NY, 1973
MS.Mechanical & Aerospace Engineering, Univ.of Rochester, Rochester. NY, 1971
BS Mechanical Engineering, Taiwan University, 1969

2 Patents and 13 publications can be seen in Google Search.

Patent

1. Pao Huang " Center Engine Inlet S-Duct Geometry for Reengined Boeing 727-100 Airplane" 1992 in USA, Europe
2. Ray Furst, Pao Huang " Rotating Diffuser for Coal Slurry Pumps" 1978
US and Foreign Countries

Publication

1. Slater A. Huang P., Paschal W. and Bewick Clare "Comparison of Experimental
Ground Testing and Computation Fluid Dynamics for the Re-Engined 727-100
Center Engine Inlet, AIAA paper 92-3920
2. Anderson B. Huang P. Paschal W and Cavatorta E " A Study on Vortex Flow Control of Inlet Distortion in the Re-Engined 727-100 Center Inlet Duct Using
Computational Fluid Dynamics", AIAA paper 92-0152
3. Huang P., Piccolo A., Paschal, W and Anderson B. " Design and Analysis of
Re-Engined Boeing 727-100 Center Inlet S-Duct by a Reduced Navier-Stokes code" AIAA paper 92-1221
4. Huang P, Piccolo A., Slater A. " Design and Analysis of Vortex Generators for
Boeing -100QF Center Inlet S-Duct by a Reduced Navier-Stokes Code'
AIAA paper 92-2700
5. Huang P. " Boundary Element Method in Microcomputers"
MSC-73-0410-E002-014 July 1984
6. Huang P. " Computer Aided Design of Centrifugal Pumps" Symposium on Transport Phenomena and Application, Taiwan University, June 1984
7. Huang P. "Computer Aided Design of Impeller of Axial Flow Tubo-Blower"
International Conference on Advanced Automation, Institute of Information
Science Dec. 1983
8. Huang P. " Dynamic Characteristics of Squeeze Film Damper Bearing"
Bulletin of the College of Engineering, Taiwan University, No XXXIV, Dec.
1983
9. Huang P " Steam Hammer Loads in Nuclear Power Plant Piping" Symposium on Transport Phenomena and Application, Taiwan University, June 1982
10. Huang P " Computer Analysis of the Flow Field in Turbo machinery"
National Science Council, Vol. X, No2. Feb. 1982
11. Huang P " Dynamic Characteristics of Taper Seals" Journal of the Chinese Institute of Engineering, Vol. 3, No. 1 Jan 1980
12. Huang P " Finite Element Methods for Three Dimensional Duct Flow"
Symposium if Computer Application in Engineering, University of Southern
California, Aug. 1977
13. Lessen M and Huang P " Poiseuille Flow in a Pipe with Axially Symmetry Wavy Walls " Physics of Fluids, Vol. 19. No 7, July 1976

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 15455)

Go to Search Parameters...

Brief Description

Free! Pipeline Construction and Installation

Free! I am working as Toolpusher since 1999 then as SNR Toolpusher.I have experience in Land rigs,different types,Land skidding rigs type,Good HSE Attitude, To manage the personnel of different nationality.

Free! 20+ years in Civil/Structural design with a variety of Cadware both 2D and 3D

Free! Current COO of Russian resource company, formerly Director and Principal of international engineering consulting firm

Free! Mill General Foreman/Supervisor/Trainer

Free! I have been a well site supervisor for the past 7 years for top companies in Canada / Duvernay Oil Corp / Shell International ( canada ). I have been working hard for the past 19 years to excel in the completion / workover / production, sector of the oil and gas industry.

Free! Geophysicist

Free! Dynamic business development and operations executive with 25+ years of experience and a history of delivering multimillion dollar P&L improvements by identifying and capitalizing on opportunities to win new business, reduce costs, and enhance processes / productivity. Strategic thinker.

Free! I am reliable, highly motivated leader, with over 17yrs experience in the drilling industry

Free! Knowledge and specialty in Versaclean Synthetic Oil Based Systems, Novaplus systems, Lignite/Lignosulfonate, KCL Polymer, Rheliant and Flo-Pro systems. Experience in exploration wells, directional, deviated, lateral as well as development wells. Experience with blowouts,and well control,

Free! Completion Supervisor for vertical and horizontal wells with 14 years experience

Free! I am an Engineering Geologist with 12 years post graduate experience in geotechnical consulting, construction supervision and mining operations. HAve post graduate qualifications in Engineering Geology (M.Sc) and am currently working as Geotechnical Superintendent at a world class mining operation.

Free! A certified professional coal geologist with over 15 years of domestic and international experience in exploration and mine production. Also have 10 years of management experience in the manufacturing sector

Free! Project Manager with established record of successfully completing large-scale drilling programs. Proficient in prioritizing and directing complicated logistical operations, synthesizing abundant data, and optimizing mineral resource potential.

Free! Twenty five years of mining and construction experience in both surface and underground. Lead Quality Engineer for MTA East Side Access NYC. Chief Inspector for Construction Management on The Heartland Corridor Project in West Virginia. Chief Inspector for the city of Atlanta on the West Area CSO.

Free! Geologist (Ph. D.), 10 years industry experience in exploration, mining and JORC-like reserve/resource estimation projects in Europe, Middle East and East Africa is interested to support and strengthen a new international team. Surpac experienced, hands on approach, bulk commodity experience.

Free! Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification

Free! Experienced hard working Geologist, Underground and open pit experience, Resource development modelling and drill program design and implementation, Very experienced mapping and strong structural background.

I am an M.Sc Ph.D and had 26 years experience as Mud Cosnultant/Supervisor. Worked worldwide with amjor mud services providers. Presently available to work immediately any where in the world. Preferrably on rotational basis, however, not regid to stay at work place. looking for some senior position

Specialist in geophysical projects management, data acquisition /processing, AVO studies (processing / seismic attributes and tomographic inversions) / mapping and interpretation; multilingual practitioner and self-starter with diverse professional experience/ skills

A qualified geologist with an exceptional track record in sedimentology, mineralogy, geochemistry of non- clastic sediments and open cut mines of non – metallic ores

I am having 24 years rich experience in Water Treatment that includes pretreatment, water filtration, demineralization plant, water softening plant, micro-filtration, nano-filtration, reverse osmosis and power plant water treatment that include O&M of condensate polishing units.

Experienced Ph.D Reservoir Compositional Simulation Engineer

CHIEF EXECUTIVE OFFICER / CHIEF OPERATING OFFICER / CHIEF FINANCIAL OFFICER

Licensed attorney with 25 years international experience in procurement and administration of contracts for engineering and construction of infrastructure, public works and power generation for petrochemical industries, facilities and contracts for engineering design services and consulting studies.

Health and safety project manager with extensive knowledge of construction techniques specializing in developing and implementing health and safety procedures for global construction companies. Expertise includes design of behavioral based safety, cultural assessments, and audit protocols aligned wi

Project leadership, project development, engineering, installation, field startup and operations. Project engineering, instrumentation and controls, distributed control systems (DCS), safety systems (SIS),programmable controllers (PLC) Human machine interfaces (HMI). System interfaces. DCS,PLC

27-year career with Chevron, I was employed both as organic geochemist and petrophysicist. Experienced in openhole log analysis, integrating log and core data. Worked with all three major logging contractors. Experienced in LWD and wireline logs. Familiar with workstation and geolog.

I Obtained a PhD, MSc and BSc all in petroleum engineering, and a wide experience (hands-on, supervision and Lab work) in drilling and drilling fluids engineering for over twenty three years. I believe in undertaking challenging for improving innovative enhancement in drilling and completion fluids.

30 plus years of international petroleum exploration in prospect generation/evaulation and in basin analysis using sieismic, geological and sequence stratigraphic tools.

C Level Oil & Gas Exploration and Production Leader

International experience in exploration and mining. Skilled in core and cuttings logging, mapping, and use of computer software to manage data and produce maps and cross-sections. Ability to travel at short notice.

cfd, thermal, aircraft, turbomachinery

I have experience in oil & gas industry for more than 22 years, 5 years in power equipment fabrication and manufacturing and 2 years in mining industry. Area of my expertise are QA/QC, Welding and NDT, Construction and Fabrication and Project Management. Familiar with International Code & Standard .

E&P Geophysicist & Integrated Geoscientist (at Advisor/Senior Staff or Practice Manager level) immediately contributing Prospect Generation, Reservoir Seismo-Geology/ Seismo-Petrophysics, 3D Reservoir Modeling & Seismic/Sequence Stratigraphy enhanced with IT Applications; Strategy Mgmt, Risk Mgmt.

Strong in project design and supervision.

A mechanical engineer with 35 years experience in the design, troubleshooting, installation, operation, and control of rotating equipment including compressors, gas turbines, steam turbines and pumps. Primary experience has been in improving the performance of gas compressors and related systems for

A senior engineering position in areas such as Mechanical Engineering, Petroleum Engineering, Artificial Lift, Multiphase boosting & Separation, Petroleum Production Technology, Petroleum Facilities Development, Planning & Design, Pipelines Inspection & Engineering, Inspection Engineering or Corrosi

I am 56 years old Turkish citizen and looking for a serious and full time job abroad. I am an AIChE member and have PhD. , M.S. degrees related with heat transfer in chemical engineering and I also have more than 30 years of experienc

30 years international executive leadership of HSEQ, integrated risk and life-cycle management gained in engineering, fabrication, construction, commissioning, operation, maintenance and decommissioning projects.

23-year profession experiences in oil and gas upstream activities with Texas Geophysicist Licenses

Senior Executive with proven track record as CEO, COO, and President of major operating divisions of a multi-national mining company.

Qualifications: CPL/JD Skills: Due Diligence, Title Runsheets, Lease Take Off's, Ownership Rpts. and Lease Acquisitions.

Structural and stratigraphic interpretation of 2D and 3D seismic data

As a Principal Process Engineer supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene, and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.

PhD degree, Base metals, Gold exploration, Strong problem-solving and communication skills and my ability to built strong collabritive relationships with subordinates, colleagues. Easy Delegating

Landman, Lawyer, Title Abstractoe, Business manager

My career encompasses over 25 years of professional experience as a project manager and supervisory scientist working in diversified environmental policy and regulatory evaluation, international fisheries and forestry management, and the effects of environmental change on landscapes and freshwater a

front-end engineering design (FEED), engineering, procurement & construction and test & commissioning of wireless network planning & design, backhaul microwave, satellite network and fiber optic transmission systems. Proven ability to design and implement large-scale wireless network and fiber optic

23 years experience including IT management, systems architecture and design, analysis, modelling and development, training as well as IS/IT strategies and frameworks for management information systems.

First [ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out