Resume - Level 1 OGPO looking for work in northeastern B.C.

Misco Jobs

Resume #83537

CONTACT INFORMATION:
View contact information...

OBJECTIVE
I am looking to obtain an entry level position within your company. I am willing to relocate, travel, or stay in camp. I am a good trouble shooter and a hard worker and can adapt to work in any weather conditions. I hope to obtain a career within your company for many years to come.

EMPLOYMENT
Pure Energy
Production Testing Operator Sept. 08 – Present

As part of pure energy's production testing division I was responsible for the safe operation of a pressure vessel. As part of the job scope for testing I was responsible for monitoring the p-tank and wells during all phases of completions, this meant recording pressures and fluid levels within the p-tanks and on surface. I also am familiar with inline work, frac recovery, stimulation, snubbing, rig work and coil tubing work. I was also responsible for maintaining the p-tanks and all test equipment including line heaters, flare stacks and incinerators, manifolds and chemical injection equipment. I am experienced in the use of Barton meters and vortec meters, texsteam chemical injection pumps, and ESD systems.

Marcal Energy,
Field and facility operator Mar. 07 - Oct. 07

As a gas plant operator I worked for CNRL (Canadian Natural Resources Limited). I was operating a 6% sour site with a compressor, heat string, liner heater, and a glycol dehydrator. My duties included taking readings of the site along with the compressor and making sure it was all running smoothly, as well as keeping all support gear for the plant running. I also I operated 12 well sites. I was responsible for the daily upkeep of these sites including pigging of lines as well as keeping all chemicals for injection into the well topped up and produced fluid hauled out daily, Also log sheets on all wells and the compressor were to be emailed to our lead operator as well as the area foreman. I was responsible for the optimazation of all of our wells by using SCADA or ZEDI programs and am familiar with how they work. I am comfortable working under air and don't mind working alone. As operator we had to maintain these shacks and plants in accordance with the AEUB regulations.

Halliburton, Wellhead Isolation Tools Division 2005 - 2006
OPERATOR Hinton, AB

World renowned Halliburton hired me as one of the nine employees' for their WIT department. WIT (wellhead Isolation Tools) isolates the wellhead from treating fluids and pressures. I have learned outstanding trouble shooting and maintenance skills. I have also insured the integrity of their multi million dollar oilfield equipment.My duties included: The maintenance and rebuilding of our isolation tools. As well as maintaining of a 20 ton crane on a tri-drive Picker truck. Preparing the truck and tools for upcoming jobs. Dealing with consultants and company men.

Education

Harry Collinge High School
Grade 12 Diploma
2000-2005

Oil and Gas Production Operator Level 1 Certificate.
Currently enrolled in oil & gas production operator level 2 through NAIT.

Tickets
Class 3Q License
∙ H2S Training
∙ St. John First Aid & Level A CPR
∙ Petroleum Safety Training
∙ ATV safety training
∙ Ground Disturbance level 2
∙ WHIMS
∙ TDG (Transportation of Dangerous Goods Ticket)
∙ Fall Protection Training
∙ Wellhead Boom Truck Operator Apprentice Certificate
∙ OFA level 3 first aid w/ Alberta Endorsement
General Oilfield Driver Improvement course

References:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9101 to 9150 of 15341)

Go to Search Parameters...

Brief Description

Industrial Engineer with strong research,analytical,leadership,communication, interpersonal skills Self motivated,persistent,adaptable,efficient in managing multiple projects simultaneously Proven ability to work efficiently in independent and team environments in diverse work cultures

Project management, maintenance engineering, mechanical design

More than 15 years in oil and gas production experience on DCS and PLc fluent in English my main language is French. Available for any jobs all over the world

M.Sc. Applied Environmental Science B.Sc. Geology Houours Expertise: Waste Management, EU Environmental Legislation, Environmental Impact Assessment, Ecology, Communications, Project Management

ROV Supervisor with 15 years experience.

New calédonian based Exploration and Mine Geologist, 5 years experience. Project management, core logging, mapping, strong structural geology skills. Proficient in the use of SURPAC, MAPINFO, GPS programs, Corel graphics and database programs. Available worldwide. x

10+ years of project management experience in the areas of accounting and financial reporting in various industries, including Management Consulting, Retail and Wholesale, Manufacturing and Distribution, Mining and Construction

Provides well site supervision for all aspects of drilling, Work over and completion activities on both drilling and work over rigs.

Dear Sirs, As you can see on my resume, all my experience is on Marine and Oil related Bussines, if any additional information is needed, please do not hesiate contact me.

1992 NTT research, Tokyo, Japan (trainee), 1993 - 1997 PhD exp. Physics, 1997 - 2000 reservoir engineer (RE), oil major's research lab, 2000 - 2002 RE Russian offshore oil development, 2002 - 2005 RE, Al Furat Petr. Co, Syria, later section head and subs. asset man.

I have a total of nearly 13 years experience drafting, with about 9 of those years in the home building business. I also have 5 years in Coil Production (AC, Steam, Condenser, & Air Handlers) I have developed custom designs for previous companies specifically tailored to the customers needs. I have

Operate fractionation plant, lean oil extraction plant, refigeration plant, instumentation work, maintenance work.

Store keeper (SAP, Computer skill, safety training and certification)

4 years underground mining experience, current MSHA, 2009 Underground Blasting Training Course, Underground Core Skills Program,

I have diploma in Surveying and 4 years exp in High rising Bulidings. I can operate all kind of Survey instruments

Diploma in production engg.and nace level-1 & 2 are comleted

Currently I am working as DCS plant operator at Distillation unit, having capacity 27000 BPD.

Preparation of Static Equipment Drawings Using Microstation & Autocad

Inlet gas system,TEG Regeneration and Treating system,Amine Regeneration and Treating unit..

Former GS 15, U.S. Government Contract Officer (KO) & Administrative Contract Officer (ACO)¡Xcurrent Senior Level Professional seeking a Project/Program Management and or Business Development opportunity

Oil Drilling & Production (Quality-Inspection & Maintenance and Auditing)

Seeking a job position in the field of Instrumentation, with challenging opportunities to further enhance and optimize leadership and technical capabilities and to contribute to the success of my employer in my fullest interest and potential

Chemical Engineer with 7 years of experience in Chloralkali Plant and Caustic Concentration Flaking/Prilling Unit

I am currently a final year M.Sc. Student in Electrical Engineering Department, King Fahd University of Petroleum and Minerals (KFUPM). My graduation is expected by May 2003 and I will be available by July 2003.

BSC CHEMISTRY / DIPLOMA IN HSE + 02 YEARS EXPERIENCE

I am working in RALLIS INDIA LIMITED for 10 years in SAP SD ERP .

Mechanical Engineer - 20+ years maintenance experience in mining - both Underground & O/Cut. Also Processing Plant maintenance & Project Management on new Greenfields plants.

HSE Training,Risk Assessement,Management,Field Safety,Loss Prevention

Aws Cwi Welding Inspector / Ndt Inspector / QA-QC Inspector

CERTIFIED IN HEAVY EQUIPMENT OPERATION, EXPERIENCED LABOR WORKER, KNOWLEDGE OF SAFETY AND TRAINED IN MSHAW, CPR CERTIFIED,CUSTOMER SERVICE SKILLS, ETC.

Implementing the health and safety plan. Daily Tool-Box talks prior to commencement of work. Inductions of new staff members on site. Ensuring that every team member wears PPE equipment and that it is worn correctly. Specified to each projects’ requirements.

Working on following systems:- *FMC smith flow meters, accuload loading pre-set batch contllores, *Rosemount saab tank radar system. *Enraf additive injector system. *MSA gas monitoring system{ suprema ,9010,9020 etc}.

Level 1 OGPO looking for work in northeastern B.C.

LAND SURVEYOR

Seventeen years experience in electrical engineering design, construction supervision, commissioning & start-up for major international EPC and Consulting firms specialized in power generation, T & D grids, oil and gas petrochemical fields

Expert Contracts and Business Development Manager with more than 20 years of experience with major oil/gas operators in the Middle East and exposure to Contracts Management from start till award and post award, establishing new ventues in drilling, engineering and related fields, & procurement.i

1.2 years of Experience as a Piping Engineer, 2 Year of Experience in PDS Modeling

I am a Controls and Instrumentation engineer from Pakistan. I have 3 year experience

Project Controller with extensive experience of implementation and operation of project management systems. Detailed knowledge of C/SCSC & EVM systems. Experience in Petro-Chem, Oil & Gas downstream distribution, Rail, Defence and Civil Engineering sectors. Extensive procurement experience.

Reservoir Engineer

I graduated from Bandung Institute of Technology (ITB) majoring Chemical Engineering on March 2004 with GPA 2,92. I have experiences as a chemical tanker chartering team and process engineer.

Qualification: B. Sc. Hons Biotechnology

I have confident, good communication skill, able to adapt to new environment very fast.

B.Tech (APE) University of Petroleum and Energy Studies, Dehradun (2005-2009) CGPA:-2.98/6 (till 6th sem)

I Am Computer Engineer And I would like to go in Automation field

Summary of Qualifications,Combined experience in Industrial Refrigeration Technician / Electrician Technician in the Pharmaceutical Industry,Petro chemistry, Building Management System (BMS), Ship Systems, Maintenance and Troubleshooting.

I am Mine Surveyor with more than five years experience in the Zimbabwean mining industry. I established survey offices at Sino-Zimbabwe Cement Company and Murowa Diamonds being the first permanent employed surveyor at the Mines. I have experience in Surpac, AutoCad and Vulcan mining softwares.

Design engineer

Previously employed to Rusal (Guyana) as a Planning Manager

Off Shore Work

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 [ 183 ] 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out