CONTACT INFORMATION:
View contact information...
SUMMARY
Experiences in various industries such as oil, gas, petrochemicals, power generation, fertilizers and acid plants. Responsibilities includes performing pipe stress analysis of critical piping systems, equipment nozzle load evaluation, finite element analysis, failure analysis, piping routing & arrangement, field surveys and development of piping material & fabrication specifications. Familiar in the application of international codes and standards such as ASME, API, ASTM, WRC, NEMA, HEI, and other company or project specific standards. Advanced knowledge in latest pipe stress analysis and software applications such as Caesar II, Autopipe, Nozzle Pro, Smart Plant Review, Plant Vision 3D, Risa 3D, Autocad and Microstation.
WORK EXPERIENCE
PegasusTSI Inc.
2002 North Lois Avenue, Tampa, Florida 33607 USA
Mosaic Alliance Multi-Projects
Mosaic Corporation
Multi-location in the USA
Lead Piping & Pipe Stress Engineer
November 2008 - Present
Lead Piping Engineer for all Mosaic Fertilizer Projects in the USA
Project estimates and Material Take-off of specialty items during Basic Engineering Stage
Lead role as Piping Engineer & Pipe Stress Engineer on Basic Engineering Stages
Lead role as Piping Engineer & Pipe Stress Engineer on Detailed Engineering Stages
Direct supervision other Piping/Stress Engineers in the project.
Development of Piping Material and Specialty Item Specifications
Control of Progress and Technical Auditing of piping engineering designs.
Coordinate with project managers, other disciplines, and client
Site survey of existing plant for confirmation and references.
Mosaic Bartow Plant No.6 OA Superheater Replacement
Mosaic Corporation
Bartow, Florida, USA
Lead Piping & Pipe Stress Engineer
May 2009 - Present
Lead Piping Engineer for Superheater replacement project
Control of Progress and Technical Auditing of piping engineering designs.
Pipe Stress Analysis of 72¡¨ Sulfuric Acid Gas Ductwork using Caesar II and Finite Element Analysis
Design and evaluation of Single-convolute type Flange & Flued Head Expansion Joints for Acid Gas Ductworks
Development of Ductwork and Expansion Joint Specifications.
Coordinate with project managers, other disciplines, and client
Mosaic Uncle Sam A-Train Converter Replacement
Mosaic Corporation
Uncle Sam, Louisiana, USA
Lead Piping & Pipe Stress Engineer
February 2009 - April 2009
Lead Piping Engineer for Converter Replacement Project
Control of Progress and Technical Auditing of piping engineering designs.
Pipe Stress Analysis of 72¡¨ Sulfuric Acid Gas Ductwork using Caesar II and Finite Element Analysis
Design and evaluation of Single-convolute type Flange & Flued Head Expansion Joints for Acid Gas Ductworks
Development of Ductwork and Expansion Joint Specifications.
Coordinate with project managers, other disciplines, and client
Mosaic Riverview No. 8 Sulfuric Acid Plant Converter Replacement
Mosaic Corporation
Riverview, Florida, USA
Lead Piping & Pipe Stress Engineer
September 2008 - March 2009
Lead Piping Engineer for No. 8 Converter Replacement Project
Direct supervision other Piping/Stress Engineers in the project.
Control of Progress and Technical Auditing of piping engineering designs.
Pipe Stress Analysis of 72¡¨ Acid Gas Ductwork using Caesar 5.10 and Nozzle Pro 7.0
Design and evaluation of Single-convolute type Flange & Flued Head Expansion Joints for Acid Gas Ductworks
Development of Steam, Ductwork, Expansion Joint and Specialty Item Specifications.
Development of Piping Material Specifications using ASME, API, ASTM codes and standards.
Supervised in the development of an EJMA based calculation sheet for the design of Expansion Joints.
Coordinate with project managers, other disciplines, and client
Site survey of existing plant for confirmation and references.
Black & Veatch Corporation (Energy-Production)
11401 Lamar Ave, Overland Park, Kansas 66211, USA
JK Spruce Unit 2 Power Plant Project
Calveras Power Partners Energy of San Antonio
Calveras Lake, San Antonio, Texas
Senior Pipe Stress Engineer
September 2007 - September 2008
Stress Analysis of Hot systems within the Turbine/Boiler Building
Flexibility, support location and design of Cold Piping (Large & Small Bore) using engineering judgment, simple hand calculations and tables.
Stress Calculation and Analysis of piping system using Caesar II Version 5.0.
Application of International Codes and Standards such as ASME B31.1, API Standards, Black & Veatch Standards, etc.
Validate piping designs and provide recommendations (such as re-routing, support relocation, additional guides/supports) for adequate piping flexibility.
Support design, detail and modeling to Powertrak Plant Vision 3D (B&V Design Software).
Steel, stanchions, lugs qualifications based on support design requirements.
Qualification of steel support designs using RISA 3D structural analysis software.
Control of progress and documentation of all calculation results
Provide designers and other discipline with data concerning pipe stress
Coordinate with designers and other engineering disciplines.
Plum Point 665MW Coal Fired Power Plant Project
LS Power Services Plum Point LLC
Plum Point Energy Station - Osceola, Arkansas, USA
Senior Pipe Stress Engineer
November 2006 - December 2007
Key person 2nd-in-charge of Plum Point Project Pipe Stress Group.
Stress Calculation and Analysis of piping system using Caesar II Version 5.0.
Application of International Codes and Standards such as ASME B31.1, API Standards, Black & Veatch Standards, etc.
Validate piping designs and provide recommendations (such as re-routing, support relocation, additional guides/supports) for adequate piping flexibility.
Support design, detail and modeling to Powertrak Plant Vision 3D (B&V Design Software).
Steel, stanchions, lugs qualifications based on support design requirements.
Qualification of steel support designs using RISA 3D structural analysis software.
Control of progress and documentation of all calculation results
Provide designers and other discipline with data concerning pipe stress
Coordinate with designers and other engineering disciplines.
Foster Wheeler International Corporation - (Thailand Branch Office)
217 Moo 12, Sukhapiban 8 Road, Tungsukhla, Sriracha, Chonburi 20230, Thailand
Olefins II Project-Kuwait Ethylene Glycol Plant 2
The Kuwait Olefins Company (KSCC)
SHUAIBA INDUSTRIAL AREA, AL SHUAIBA, KUWAIT
Lead Pipe Stress Engineer
August 2006 - October 2006
Stress Calculation and Analysis of piping system using Caesar II Version 4.5.
Application of International Codes and Standards such as ASME B31.3, DOW Design Standards, other ASME Codes, API Standards, WRC Bulletins, Foster Wheeler Standards, etc.
Validate piping designs and provide recommendations (such as re-routing, support relocation, additional guides/supports) for adequate piping flexibility.
Study on possible re-routing and/or support relocation/addition with the aid of Smart Plant Review, Plot Plans, and other references
Control of progress and documentation of all calculation results
Provide designers and other discipline with data concerning pipe stress
Coordinate with designers and other engineering disciplines.
Selection of Piping supports and Design of Special Pipe Supports
CDU-3 Revamp Project
Thai-Oil Company Limited / ABB Process Solutions & Services
Sriracha, Thailand
Lead Pipe Stress Engineer
January 2006 - October 2006
Key person in charge of CDU-3 Project Pipe Stress Group.
Control of progress and documentation of all stress issues.
Coordinate with designers and other engineering discipline
Site survey of existing lines, support locations, validity of re-routing options, etc.
Stress Calculation and Analysis of piping system using Caesar II Version 5.0
Application of different International Codes & Standards such as ASME B31.3 & other Codes, API Standards, WRC Bulletins, Shell DEP Standards, ABB Standards, Foster Wheeler Standards, etc.
Provide design engineers with recommendations (such as re-routing options, support relocation, additional guides/supports, spring supports, etc.) for adequate piping flexibility.
Stress analysis of Plan Drawings and General Arrangement Drawings using Visual Inspections and Engineering Judgement.
Study on possible re-routing and/or support relocation/addition with the aid of Smart Plant Review, Plot Plans, and other references
Provide designers and other discipline with data concerning pipe stress
Design of Spring Hangers/Supports and Datasheets.
Selection of standard piping supports and design of Special Pipe supports of piping layouts.
Material Take-off of pipe supports, special pipe supports, PTFE, etc.
CTCI Corporation (Taiwan)
CTCI Tower, 77, Sec. 2, Tun Hwa South Road, Taipei 106, Taiwan, R.O.C.
DAH-TARN Power Station 4200MW Combined Cycle Power Plant Project
Taiwan Power Company
Taiwan, R.O.C.
Senior Pipe Stress Engineer
October 2004 - October 2005
Stress Calculation and Analysis of piping system using AutoPipe Plus Ver 6.1
Application of International Codes and Standards for Power Plant Design such as ASME B31.1, CTCI Standards and others.
Design of Pipe supports and Special Pipe Supports.
Provide design engineers with recommendations (such as re-routing, support relocation, additional guides/supports) for adequate piping flexibility.
Study on possible re-routing and/or support relocation/addition with the aid of Smart Plant Review, Plot Plans, and other references
Layout of piping arrangements around piperack, steam blowdown piping, etc.
Control of progress and documentation of all calculation results
Provide designers and other discipline with data concerning pipe stress
Coordinate with designers and other engineering discipline
Japan Gas Corporation Philippines, Inc. - JGC Phils.
Madrigal Business Park, Ayala Alabang, Philippines
SOHAR Refinery Project
Sohar, Sultanate of Oman
Senior Pipe Stress Engineer
April 2003 - October 2004
Key person for stress analysis of Process Area 4 (Hydrogen Regen Unit, Sour Water Stripping Unit, Amine Regen Unit, Sulfur Recovery Unit, Tail Gas Treating Unit)
Stress Calculation and Evaluation of piping systems using Caesar II Ver. 4.40
Preparation of Stress Sketches for initial stress analysis
Provide design engineers with support and anchor loads.
Prepare Critical Line listing for stress analysis
Provide design engineers with recommended resolutions (such as re-routing, support relocation, additional guides/supports) for over-stressed piping arrangements.
Study on possible re-routing and/or support relocation/addition with the aid of Smart Plant Review, Plot Plans, and other references
Control of progress and documentation of all calculation results
Provide designers and other discipline with data concerning pipe stress
Selection of Spring for spring supported pipes and equipment
Coordinate with designers and other engineering discipline
CSPC Nanhai Petrochemicals Project
CNOOC and Shell Petrochemicals Company Ltd.
Pipe Stress Engineer
April 2003 - June 2003
Stress Calculation and Evaluation of inner and outer piping of Fired Heater (Furnace) on Caesar II Ver 4.40
Preparation of Stress Sketches for initial stress analysis
Provide design engineers with support and anchor loads.
Prepare Critical Line listing for stress analysis
Provide design engineers with recommended resolutions (such as re-routing, support relocation, additional guides/supports) for over-stressed piping arrangements.
Study on possible re-routing and/or support relocation/addition with the aid of Plot Plans, isometric drawings, equipment drawings and other references
Control of progress and documentation of all calculation results
Provide designers and other discipline with data concerning pipe stress
Selection of Spring for spring supported pipes and equipment
Coordinate with designers and other engineering discipline
PSPC Shell Bottom Loading Gantry Gas Project
Pandacan Oil Depot, Shell Philippines Inc.
Piping Engineer & Pipe Stress Engineer
September 2002 - April 2003
Detailed piping layout for Tanks, Centrifugal Pumps, Pipe Sleepers and Pipe Racks
Application of Engineering Code of Standards (ASME Codes, Shell DEP - Design Engineering Practices, JGC Piping Standards, etc.)
Detailed Engineering and drafting (thru AutoCAD) for piping arrangements around Tanks, Centrifugal Pumps, Pipe Sleepers and Pipe Racks
Site Survey for existing pipes, supports and tie-in points.
Material sketch and Material Take-off and input (thru WinMTO - Material Management Software)
Loading Calculation preparation for pipe supports
Piping Stress Calculation and Evaluation of critical lines thru AutoPipe
Preparation for Piping Information for Inter-discipline Correspondence
Coordination with other Engineering Discipline for proper exchange of information
JGC Philippines - Multiple Local & International Projects
Piping and Pipe Stress Engineer
March 2002 - February 2003
Stress Calculation and Evaluation of piping systems on AutoPipe and Caesar II
Preparation of data for Static Stress Analysis of piping systems using P&ID, Pipe Line List, Equipment Drawings, etc.
Preparation of Piping sketches for Stress Analysis
Application of Engineering Codes for Piping Stress (ASME Codes, ASTM Codes, AISI Codes, JGC Standard Codes, Project Codes, etc.)
Piping Design and Layout arrangements around Columns, Pumps, Piperacks, Pipe Sleepers, Heat Exchangers, Tanks, etc.
Process of Material Take-off and Material Management Softwares
Line Checking between Piping Isometrics and P&ID¡¦s
AutoCAD works on Plan and Isometric Drawings
Project Proposal Preparation
-Material Take-off and input
-Material Sketch (isometric & plan drawing based)
-Manhour estimation
-Bill of Materials
-Bill of Quantities
-Identification of System loops for Hydro-testing
Epson Precision (Philippines) Inc. - Lipa Plant
Automation and Painting Engineer
Shaft Production Section
Lima Technology Center, Lipa City, Batangas, Philippines
January 2001 - March 2002
Supervise and Monitor of operators and production output.
Maintains top quality of output produced by the Machine
Supervises the operation of the Epson SRP Line Coater (Painting Machine)
Supervises Operation and Maintenance of the SRC-500 Epson Manipulator Robot
Automation programming and software maintenance of SRC-500 Epson Manipulator Robot and Spindle Robot Feeder
Supervises in the Operation and Maintenance of the Epson Conveyor Oven, Straightening and Laser Bent Check Machine
Supervises in Operation and Maintenance Calibration of the Keyence Laser Micrometer
Monte-Aire Properties, Inc (Real-Estate Developer)
Design Engineer
Bucal, Calamba, Laguna, Philippines
March 2000 - December 2000
Structural Roof & Water Tank Framing Design
Engineering plans for Land and Housing Development through AutoCAD
Validation of measurements of manually drafted designs through AutoCAD
Interpret and countercheck of Land Titles and Subdivision Plans thru AutoCAD
Primary Layout Artist in creating presentations, billboard ads, brochures, leaflets, and other advertising materials
National Power Corp. MAKBAN Geothermal Power Plant
Maintenance Staff
Calauan, Laguna, Philippines
November 1999 - March 2000
Annual Over-hauling procedure & maintenance for Steam Turbines, Hotwell Pumps, Cooling Towers and other Powerhouse equipment
Operate and data input for MIMS Material Handling Computer Software
Freelance Computer Sales and Repair Man
January 1999 to October 2004
Home servicing repair and maintenance of personal computers.
Assemble and sale of personal computers, parts and accessories
EDUCATION
„« Mechanical Electrical Engineering Reviewers Institute of Training
MERIT Philippines
Mechanical Engineering Board Examination Review Course
May 2000 - September 2000
Manila, Philippines
Colegio de San Juan de Letran
Bachelor of Science in Mechanical Engineering
1994 - 2000
Calamba, Laguna, Philippines
EXAMINATIONS AND LICENSES
Mechanical Engineering Professional License
Philippine License No. 0057640
October 2000 Examination
National College Entrance Examination (NCEE - Philippines)
95+% Rating
1993 Examination
TRAININGS AND SEMINARS
Project Delivery Leadership Program
Dr. Hal S. Resnick of Work Systems Associates, Inc.
Center Club Plaza, Tampa, Florida, USA
January - September 2009 (7 module program)
Pipe Stress Analysis Training Seminar for Caesar II
Engr. Darren Yin of COADE Engineering
Alabang, Metro Manila, Philippines
January 7-11, 2004
Certified Piping & Pipe Stress Engineer Detailed Training Course
Japan Gas Corporation Philippines, Inc.
Alabang, Metro Manila, Philippines
March - August 2002
ISO 14001 and ISO 9002 Training
Epson Precision (Philippines) Inc.
Lipa City, Batangas, Philippines
January 2001
„« AutoCAD 2000 Training Course
Colegio de San Juan de Letran
Calamba City, Laguna, Philippines
October 1999 - April 2000
ORGANIZATIONS / AFFILIATIONS
Philippine Society of Mechanical Engineers
Member
November 2000 to Present
Koinonia de Letran (A Religious Organization)
President
1999 - 2000
Alliance of Student Organizations
President
1999 - 2000
Letran Musicians¡¦ Circle
President
1997 - 1998
Letran Mechanical Engineering Society
Member
1995 - 2000
UPLB Pi Omicron Fraternity
Member
1994 - 1996
COMMUNITY SERVICES
Reach Out Activity
Gift Giving and Relief Operation
Once a year every December from 1996 - 2000
Sponsored by Koinonia de Letran
Apostolate Activity
Visits at Orphanages & Homes for the Aged
Once a year every February form 1996 - 2000
Sponsored by Koinonia de Letran
COMPUTER SKILLS
Software Knowledge
COADE Caesar II
REBIS AutoPipe
NozzlePro 7.0
FE Pipe
Navisworks Freedom
Smart Plant Review
Bentley Microstation
Powertrak Plant Vision 3D
RISA 3D (Rapid Interactive Structural Analysis)
AutoCAD
Visio Technical
Microsoft Office
Lotus Notes
View contact information... |