Resume - Graduated from Geological Engineering, Faculty of Earth and Energy Technology, T...

Misco Jobs

Resume #83726

CONTACT INFORMATION:
View contact information...

Skill Gained

1. Geological mapping in field. Those are sedimentological mapping to analysis outcrop in field, structural geology mapping to reconstruct regional structural geology, vein mapping in economical mineral exploration such gold, cooper, silver and etc. It's very useful for next exploration.
2. Facies analyze and depositional environment. Interpreted base on outcrop describes, core analyzes and electrofacies analyze from log data.
3. Modeling of hydrocarbon reservoir especially in Mahakam delta using cutting and fluid from log data and facies analyzes to reconstruct the reservoir.
4. Calculation the hydrocarbon reserves in reservoir from reservoir model.
5. Calculation the reckon coal reserves from geological map.

Formal Education

1. Bachelor Geology Engineer,2003 - 2008,Trisakti University,Jakarta,3.14 (0.00 - 4.00)
2. Senior High School,Science Class,2000 - 2003,SMU Negeri 04,Balikpapan,7.14 (0.00 - 10.00)
3. Junior High School,1997 - 2000,SLTP Negeri 10,Balikpapan
4. Elementary school,1991 - 1997,SD Negeri 022,Balikpapan

Language Skill

Language Speak Write Listen
English Good Good Good
Indonesia Very Good Very Good Very Good

Computer Skill

Software Level
Windows Office Expert to operate
Geoframe Able to operate
Surfer Able to operate
Geolog6 Able to operate
Corel Draw Able to operate

Training

1st Study Field
This training usefully to understand a basically practice in geology concept, there are learning of field orientation, learning the basic geology tool, learning of basic manner to description and create profile of lithology, interpretation of geology structure, and learning to divide geomorphology unit in field.
Bayat – Klaten, Central Java held by Trisakti University
2 August 2005-27 August 2005

2nd Study Field
Detail geological mapping such as geomorphology, sedimentology and structural geology to reconstruction historical geology and to evaluating the economic and disease potential from geological factor in area of study. Fossil analyze to know the depositional periodic and petrography analyze to divide genetically lithology from mineral composition.
Karangsambung,Central Java held by Trisakti University
7 August 2006-7 September 2006

On the job training
Sedimentology analysis such as electrofacies from log data using Geolog6 software, interpreting sequenstratigraphy, parasequen and bedding of lithology in interval of study, dividing kind of facies into there environment, interpret direction of depositional, modeling reservoir (sandstone) base on facies analyze, reconstruction structural geology. Combining reservoir map and structural map to make potential hydrocarbon map, and than calculation initial hydrocarbon potential in place from 4 (four) reservoir that had been analyze.
Balikpapan held by PT. TOTAL INDONESIA
12 August 2007-12 December 2007

Work Experience
1. PT. Sagita Energy

Work Duration: 11 September 2008 – 25 September 2008
Place: Berau - East Kalimantan
Position: Geologist
Supervisor: Ariyanto
Contact Person of Supervisor: +62813-20556592
Project Title: Geological survey of coal exploration

Job Description:

- Leading the team about 5 person in field.
- Detail mapping for coal description in 5000 Ha of study area to understand spreading of coal bed.
- Detail lithology description in using sediment profile to dived the thickness of lithology especially on coal bed.
- Infer the total of coal bed in field that projected to geological map to understand how the model type of coal that have combine with construction of structure geology in field that has been mapped.
- Infer the recon of coal reserves in field.
- Make report and give to the PT. Sagita Energi about the result.

2. Badan Pengkajian dan Penerapan Teknologi (BPPT)

Work Duration: 10 November 2008 – 30 January 2009
Place: Soroako - East Sulawasi
Position: Supervisor
Project Manager: Abdul Haris
Contact Person of Project Manager: +62813-83771323
Project Title: Geotechnical Survey

Job Description:

First Project:
-Leading the project in field and estimate the time that has been scheduled before in Jakarta.
-Job had done by use drilling operation, depth of drilling is about 15 m - 45 m, use 12 hole.
-Focus of job is to understand how is condition of slope in field to the sliding potential, because in the study area will been used to the mining operation area of nickel.
-Record the geotechnical test result there are SPT (Standard Penetration Test), UDS(Undisturbed), and coresample.
-As a supervisor i had described the core data, make a profile of core and simple modeling of sedimentation sequence.
-Area of study is work in turbidity zone, with soil contain are limonite, saprolite, peridotite boulder, and fresh peridotite. i have to dived each of sliding strata to understand how depth of the sliding in one period. Base on the study result there are 3 period of sliding that have been formed.

Second Project:
-Leading the project in field and estimate the time that has been scheduled before in Jakarta.
-Job had done by use drilling operation, depth of drilling is about 15 m - 50 m, use 10 hole.
-Focus job is to update data of lithology and to installing the geotechnical instrument there are phizometer and Inclinometer.

Thirst Project:
-Leading the project in field and estimate the time that has been scheduled before in Jakarta.
-Job had done by use drilling operation; depth of drilling is about 20 m - 25 m, use 3 holes.
-Focus of job is to do the geotechnical drilling analyses.
-Record the geotechnical test there are SPT (Standard Penetration Test), UDS (Undisturbed), and core sample.Core sample is describe is profile lithology.

3. PT. Transald Consultant

Work Duration: 1 March 2009 – 5 March 2009
Place: Ciemas, Sukabumi - West Java
Position: Geologist
Project Manager: Anto
Contact Person of Project Manager: +62813-88039308
Project Title: Geological mapping in gold exploration

Job Description:

-Detail mapping of vein distribution use to gold exploration.
-Describe the mineral composition and divide genetically of vein into high and low sulphides base on the alteration rock and mineral composes of vein
-Reconstruct the vain in field to the map.

Referees
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8651 to 8700 of 15497)

Go to Search Parameters...

Brief Description

PRODUCTION PROFILE

my theoretical skills in drilling engineering is very nice.i can speak with english,kurdish and persion

E&I Supervisor or Tech

8 years experience in downstream logistics. Developed logistical planning for crude oil transportation via Caspian Sea to Black Sea ports, good communication skills. Demurrage claim settlements, reduced third party demurrage claims by $3 million during 4 years.

Currently a Cryogenic gas plant operator 3 yrs. Well Head compression experience 1yr. Associates Degree in Electronic Instrumentation and Control.

b.sc with first class and 2.8 years of experience in chemical/petrochem industry

Graduated from Geological Engineering, Faculty of Earth and Energy Technology, Trisakti University Jakarta in August 2008 with cumulative grade point average (GPA): 3.14 (scale from 0 to 4). My organization experience as membership of Gathering Student Board of Geology in Trisakti University

Competency in developing HSE Management system and conducting compliance audits, advising on HSE requirements & statutory compliance.

Marine engineer seastaff 15 years/eng superintendent 5 years/ operations manager 4 years/ technical manager 4 years

Great expierience and offshore back ground

Drafter, Designer, AutoCAD, Revit, CADD Manager, VB, VBA, AutoLisp, Access database, MS Office

Sr. Field Engineer, 20+ years, excellent customer service skills, electro-mechanical repair, maintenance

I'm a diploma holder in Chemical technology having 12 yrs of experience in petrochemical field worked as Junior Engineer in Ammonia synthesis plant of all sections of desulphurization, catalytic reforming,CO2 removal, synthesis reactor, refrigeration, ammonia storage with adequate HSE practices

I am a mechanical technician I can do all rotary and stationary equipment jobs.

my expertise are using any release of autocad, rhinoceros for 3d and GHS for stability calculation.

Reliable, hard working Geologist with experience in Environmental Consulting and Geophysical Investigations .

Degree and diploma in chemical engineering.

Experienced in developing and delivering drilling plans, including wellbore and casing design,mud program,cementing program, directional plan, completion design, leading risk assessments, developing safety programs for workover, drilling and completion operations on exploration and development wells

Seeking a challenging career position where my technical skills, talents can be effectively utilized by a company offering long-term opportunities for professional growth in recognition of dedication, drive and superior performance.

I have been in Customer service Line since 10 years. I have experince towards handling customers and solving the inquiries as well. Further more my qualification are until SPM but the working experince towards this line giving me a lot of opportunity to built up my career.

Have worked 9 years in mining industry. during this period i worked as dumptruck operator, l.h.d operator, jumbo operator, shift coordinator and drill master. what i like and enjoy of my work is the challenge of keeping my-self,

I am a Journeyman licensed plumber with electrical certification(NC) I have OSHA competent person training for heavy equipment and excavation. I am gas tite certified and a good mechanical skil set.

I Started at Newmont Gold Company In 1996 as a miner trainee, within one year I was promoted to miner 3. I also worked for Stillwater mining corporation in Montana where I was a lead miner in charge of 15 miners and two levels of the mine.

Young energetic hard working safety conscious person with good experience in comissioning training and optimization of a gold treatment plant

Underground Mining, Roof Support team.

Holder of the diploma in safety and health and certified in indsutrial hygiene management, holder of the NEBOSH certifcate in OSH

Self-motivated with experience in field of instruments, process, oil&gas valve and actuator control system. Knowledge, understanding and interesting in variety of control systems such as DCS, PLC, SCADA, and MARK series.

Microstation, AutoCad, Electrical Utility as well as Residential/Commercial, Pipeline Drafting and GIS

Safety Trainer seeking entry level position with Safety minded company.

Mechanical engineer with 13 month experince in production

I studied B.E.,in Instrumentation and control Engineering with 75% and First class with Distinction

Registered Nurse with one year working experience in different special areas like ICU,EMERGENCY DEPARTMENT,RECOVERY ROOM,SURGICAL AND MEDICAL WARD

Seeking a position in Project Management to utilize my Practical & Theoretical knowledge as well as technical skills so as to serve the firm for long time, which enables my professional growth. To work efficiently and honestly for the betterment of the organization and personal development .

7 Years of experience in Installiation,Testing & Commissioning of Electrical Equipments in the field of Power Stations,Petrochemical Plant etc

I am a red seal electrician with 7 years exp. I have worked sinking shaft & development.

civil formwork

B.Tech., Diploma., Civil engineering

I have worked as a drilling supervisor for 5 years and at the moment for 1.5 year work as a completion and drilling material specialist for national iranian oil company. I am ready to relocate internationally regarding to job situation.

Mechanical Design Engineer for Oil and Gas with 10 yrs exp. for EPC companies

Paint Inspector/Supervisor

Electrical and instrument project manager construction, design and inspection

Open Hole LWD Logging and log analysis, M.Tech (Applied Geology)

My most recent experience was repair and maintenance on board a Tanker vessel, Livestock and Reefer Ship. I was responsible for all the hot work and repair, including the use of Manual lathe machine

Overhauling of Rotating equipments e.g pumps, compressors, gas turbines etc. in an oilfield

Presently working with ConocoPhillips Syria Dez.Gas Ltd. since April 2002 as a Senior Warehouse & Procurement Supervisor in Syria (Middle East) on 28 Days ON/OFF schedules through GMOS (MSI). Job Profile: Responsible overall for all aspects of materials including warehousing, procurement operations

Working In the Oil and Gas Drilling Industry Since 1986 Looking for a company that wants its employers to look after it !!

Rotating Equipment Mechanical Engineer

Civil Engineering,Construction Manag., Geotechnical, structure, Design of steel towers

Senior Geologist (16+ years oil and gas experience), graduated in geology from University of Kansas in 1987.

I am currently working in a Water Utility Company as a Project Development Manager with exposure in designing pipe network, supervision of pipelaying works, and pipe maintenance, handles customer service operation, and Customer and Billing computerization project.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 [ 174 ] 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out