Resume - Able to prepare welding procedure/ welder qualifications, organize for hydostati...

Misco Jobs

Resume #84127

CONTACT INFORMATION:
View contact information...

WELDING INSPECTOR (AWS CWI)

Career Summary

18+ years of experience in engineering and construction activities in Oil field, Petrochemical, Refinery and gas handling projects.
* Broad knowledge of oil and gas facilities and construction management.
* Demonstrated experience in various projects.
* Review of project QA/QC and HSE plans and monitor for the system implementation.
* Review all procedures, Quality inspection test plan and method statements prior to commencement of any activity.
* Prepare WPS, monitoring the procedure qualifications and subsequent welder qualifications, piping/pipeline welding inspection, pressure test and coordination with sub con/client.
* Verify welder performance records and recommend steps to minimize weld repair rates.
* Verify and maintain the calibration status of necessary Inspection & Testing Equipment.
* Ensure that all the required tests are properly conducted and reports submitted on them.
* Preparation of final dossier and handover to Commissioning team.

Educational Qualification: Diploma in Electrical and Electronics Engineering.

Technical Qualifications: AWS CWI (CERT. NO: 08082441).
ASNT NDT Level II RI
ASNT NDT Level II MT
ASNT NDT Level II PT

Trainings Attended: Construction Risk Assessment from TOTAL E & P
YEMEN.
Valid driving permit from TOTAL E & P YEMEN.

Key responsibilities and functions

* Observe all safety regulations.
* Planning, management and coordination of all activities associated with the construction, installation and commissioning of oil and gas facilities.
* Review that materials supplied by Contractor have Inspection Release notes from recognized Third party inspection agencies.
* Report to QA/QC manager on the performance of the Quality Management Systems and the need for improvement.
* Active liaison between various groups on the project, including engineering, construction and installation contractors/Operations.
* Responsible for establishing and ensuring that preventive action are implemented and corrective actions are taken within the area of responsibility.
* Establish and maintain liaison with the Client's QA/QC representatives.
* Monitor the status and disposition of any non-conformity on the project.
* Provide response based on root cause analysis for quality issues, and corrective action requests.
* Visual testing of welds for meeting codes and client specifications.
* Coordinate for NDE's with third party inspections when necessary.
* Release pipelines and piping for hydro testing.
* Quality surveillance, witness for hydro testing and documentation review.
* Carry out final inspection, prepare punch/ defect list and any other document, certify and clear for pre-commissioning activities.
* Preparation of contractor performance report and project close out report.
* Represent company in all meetings/discussions with the Client's QA/QC representatives.
* Initiate, organize and chair weekly site technical meetings and monthly progress meetings and report on them.
* Ensure that Contractor / Employer's obligations under the agreement are strictly adhered to.
* Review the training program submitted by the Contractor to ensure that it is beneficial to the Client.
* Assist in performance of Internal Quality Audits and ensure any corrective actions needed are followed up and cleared.
* Coordination of shut down activities, as applicable
* support for ISO certification and training compliance
Employers Profile:

01. Masarco Oil Field Services Co, Yemen - September 2003 to till.

Client: Total Exploration and Production at Kharir block-10.

Position: Senior QA / QC Engineer(Welding inspector)

02. M/S.Unitech Machines Ltd, New Delhi - July 1996 to August 2003

Position: QA/ QC Engineer

03. Gulf engineers & Constructors Pvt Ltd, Chennai - Feb¡¦91 to June ¡¥96

Position: Piping Supervisor

Personal Summary
Date of birth 07.05.1970

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7801 to 7850 of 15508)

Go to Search Parameters...

Brief Description

Seeking a challenging and satisfying position in a top class signalling organization and to benefit it and my personal self through continued application of my professional and technical skills Work Experiance in McML Systems :

ERECTION AND COMMISSIONING ACTIVITES

I am the miner who has the blasting certificate, i have been been working under the stoping, development and the trackless sections, I have reached all my monthly calls , all my working areas have been declared safe. I am the undergratuate at University of JHB in mining engineering.

A young graduate who is capable of performing roles with little supervision. A very determined practical person, with the ability to learn new things. I enjoy and work well as part of a team, yet equally at ease working on his initiative

I’m Petroleum Engineer. I have Bachelors degree in Petroleum Engineering. From the beginning of year 2008. until now I work as Pipeline Engineer in company SAIPEM ( member of ENI group).

Mechanical Engineer, Project Manager

I am working as a planning Engineer. I am B.E- Civil Engineer graduate. 2.5 years of experience in construction field. Extensive knowledge in PRIMAVERA P3. Experience in Planning Division •Good knowledge in MS Office

A highly talented designer in the area of pipe for petrochemical complex. Using the information supplied by engineers and equipment vendors. Experience to work on P&ID's, vessel structural detailing, GA's, isometric piping, 3D structure design.

Senior Estimation Engineer for oil and gas construction projects

Experienced Supply Chain and Strategic Sourcing Specialist with Big 4 Consulting firm

I have over 9 years of experience working in the major international oil and gas projects participating in the activities at the different phases of a project. The areas of my expertise are: Maintenance activities support, Implementation of maintenance data base in CMMS

Experienced with Microsost Office, ie Excel, Word, PP, Access.

PRODUCTION SHIFT INCHARGE.DRILLING INCHARGE.PP MODULE,PRODUCTION &DRILLING PLANNING .B.Sc in mining engineering(4 years),present time in ACC HOLCIM chaibasa cement works

25+ years Upstream Project Controls Management across all stages of Oil & Gas E&P Business Process Life Cycle:

Over 8 years of experience both as a QA Inspector and QC Inspector in Welding and NDT Inspection in different Sectors of Engineering & Construction like LNG tanks, LPG Spheres, Chemical plants, Power Plants, Fertilizers Manufacturing Industries, Refineries, Shipyards, FPSO Conversion projects, Oil R

PDMS,Auto Cad,Hypermesh,

Cementing Engineer, Technical Professional

trackless fitter

Presently I am working in Wade Adams Dubai As a Health&Safety Officer

I am currently a process operator at Hovensa LLC, a 495,000 bpd refinery, located in the U.S.V.I. I am certified to operate both crude and vacuum units and am training to certify on an amine reclaimation unit. Job skills and responsibilities are listed on attached resume.

M.E. Civil in Transportation Engineer with I-Class

Chemical Engineer from Venezuela with unfinished MSc, FLAIR Operator in Geoservices, marketing research experience on Plastic Industries, Reservoir Simulation experience from PDVSA-INTEVEP. Interested to work worldwide, specially Australia.

Passed out Diploma in Instrument Engineering through NATIONAL POLYTECHNIC from July’ 1993 to May’ 1995

I am a QA/QC Engineer with over 8 years experiences currently work in Saudi Arabia as a Senior QA/QC Engineer ( QC Supervisor ARAMCO SAP No. 70009461 in GAS Plant ( 3 Sulfur recovery units and 3 Gas Sweetening Units...) Kindly check the attached CV for all details.

25 years experience. Plant Manager and Area Production manager.

Preparing quantity schedules and bills of materials managing project costs and performing cost analysis. Managing different project quantities related to the implementation of the project such as, materials, equipment and resources. Forecasting project quantities and ensuring that construction costs

Directional Driller 7 yrs Exp.

B.sc(Hons) chemical engineering with 7 yrs Experience in Drilling Fluids Technology

Material Engineer (Cathodic protection, corrosion, coating and painting)

20+ years in the gold mining & milling industry, multifaceted processing career including start UPS, operations, supervision and training.

Piping designer with 10 years experience of Oil & Gas, Petrochemical & Manufacturing industry.

Familiar work with computer office and internet

Electrical, Instrument, Electronics Engineering 20+ years

Heavy equipment operator over 20+, Body Work and Custom Paint 20+ and Welder 10+

Environmental Scientist/Geologist seeking entry level employment within the United States

Working as: Heath Safety and Environmental Engineer for Snamprogetti S.A. Ltd At Saudi Aramco

I have 12 years experiance as a Gold Room Refinery Operator.

ELECTRICAL & ELECTRONIC ENGINEER/SAFETY OFFICER

I am a graduate of Geology from Olabisi Onabanjo University,Nigeria.I have my Master's in poetroleum Geology/Sedimentology from the University of Ibadan.I am proficient in the use of Microsoft office Suite.

5 years working experience as Draughtsman in construction, Oil and Gas indutry and steel fabrication.

HND Elect/Elect. Engineering[Telecommunication option].

Most of my experience includes researching abstract and running title in Texas and Louisiana. My experience also includes working as both a mineral agent and perimit agent for 3-D seismic. I have 3 yrs total experience in the business. Most recently I worked doing field due diligence in Louisiana.

Attended a workshop on Modern Well Log Data Interpretation from 25th to 30th February-2008 • Exposed to different well logging tools at Schlumberger Company, Mumbai, in Feb-2008 • An overview of seismic data processing and Interpretation in SPIC, ONGC Ltd., Nov-2007 • Observation of different Stru

To ensure the safe utilizing of assigned equipments by assigned subordinates, resources, competencies and skill to meet daily planned productions targets.

Ballast Control Operator , Watchstander , Barge Engineer

MBA Finance. Procurement & Supply Chain expert with over 14 years of experience and a strong knowledge of inventory, logistics, imports and exports. Proven capabilities in project management, business analysis, problem solving and negotiating. Fluent in English & Spanish.

My background is Drilling Engineer and I have a first experience as drilling supervisor, so I want to build my career in the world of drilling.

Able to prepare welding procedure/ welder qualifications, organize for hydostatic test and witness the same, prepare the final dossier for the project and submit to the commissioning team. Diploma in electrical and electronics engg, AWS Ceertified welding inspector and Level II in RI, MT,PT

Nine years of mechanical engineering experience: One year working as client mechanical/facilities lead engineer on major offshore FEED BOD. Two years providing engineering, procurement and construction management services to onshore oil & gas producers and pipeline transportation companies.

Working as senior telecommunications technician for a big gas company.

First Prev 151 152 153 154 155 156 [ 157 ] 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out