Resume - Mechanical Engineer - 20+ years maintenance experience in mining

Misco Jobs

Resume #84147

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS: Diploma in Mechanical Engineering.
Caulfield Institute of Technology.
Victoria - AUSTRALIA. Awarded in 1979.

OTHER: Member of the Institution of Engineers, Australia.
Can speak and write Spanish.

PROFESSIONAL EXPERIENCE

Dec'07 - Present

Volcan Compañía Minera - PERU
(Various mines U/G & Open Cut – Silver, Lead, Zinc, Copper, Gold)

Position:- Resident Engineer Group Projects

Duty Summary:
- Designing and managing the construction of a new 6,000 Tonne/Day Oxide plant for silver recovery, by the Merrill-Crowe process.
- Designing and managing the construction of a new 25,000 Tonne/Day plant for the recovery of Copper, Lead & Zinc concentrates.
- Winder selection for sinking 700m shaft
- Upgrading 6 km underground rail haulage and u/g water pumping stations.

Sept'05 – Dec'07

Bogoso Gold Ltd - GHANA - AFRICA
(Old Underground Gold Mine)

Position:- Underground Maintenance Engineer

Duty Summary:
- Supervising 3 mechanical & 1 electrical foremen – supervising 70 tradesmen, pump operators, winder drivers.
- Rehabilitating all shaft steel work and services (air, water, electrics) in 2 shafts one 1500m deep the other 1000m.
- Maintaining 4 Surface & 3 Underground winders and upgrading conveyances.
- Designing, building, maintaining U/G pumping stations.
- Developing Safe Work Procedures for major plant and equipment
- Maintaining electric locos & rolling stock, rocker shovels, rockdrills, diamond drill rigs,
- Upgrading U/G and surface electrical reticulation
- Maintaining air compressors, 650Hp Ventilation Fan
- Help in commissioning new 10,000 Tonne/Day BIOX gold processing plant.

Dec'04 – Sept'05

Ergon Energy - Queensland - AUSTRALIA
(State Electrical Distribution Company)

Position: Electrical Distribution Designer

Duty Summary:
- Designing underground 11kv/415V/240V reticulation services for new housing subdivisions.
- Designing overhead 33kV/11kV/415V "around town & country" reticulation – both new and upgraded.
- Updating CAD interactive reticulating drawings - using inhouse "Smallworld" design software incorporating GIS information.
- Detailing construction schedules of works plans to give Linesmen.
- Detailing upgrade plans for town lighting

July'02 – Oct'04

PERILYA Broken Hill Ltd - NSW. - AUSTRALIA
(Underground Silver, Lead, Zinc)

Position: Senior Mechanical Engineer

Duty Summary:
- Developing Safe Work Procedures for major plant and equipment.
- Investigating major accidents & incidents using Root Cause Analysis. Then implementing the recommendations for a safer work place.
- Completing a structural audit of the 50 year old processing plant with follow through modification designs to improve structural soundness.
- Initiating mechanical and electrical project works to streamline plant bottle necks, improve production and clean up the environment. Requiring preparation of Capex applications, Risk Assessments and time-lining.
- Preparing Capex Justifications for replacing old mobile fleet.
- Developed strategies for the maintenance planners on formalising PM & Servicing tasks for installation on the CMMS (Maximo). This also included putting together Operator pre-start and CM sheets for all fixed and mobile plant.
- Programming the Honeywell production process control system to record CM data to automatically down load on to the CMMS.
- Managing contractors on project works ensuring all safety aspects are met i.e. JSA's, HWP's, inductions, etc.

July'99 – Jan'02

Part time maintenance management consulting for various companies in Ecuador.

June'98 – July'99
VERITAS DGC LAND Inc.
(Petroleum Exploration - Bolivia)

Position: Maintenance Engineer

Duty Summary:
- Re-engineered various aspects of the company's operations. Involved: -
- Implemented a new cost coding system to give more accurate quotes for new projects to prospective clients.
- Rationalised and catalogued warehouse.
- Implemented new techniques for surveying - for better efficiency. This involved the mechanising of track cutting
- Modernised Base Camp electrics – to set up a camp (of 200 people) in one day, not 2 weeks.
- Implemented preventative maintenance procedures on fixed and mobile plant.

June'97 – June'98

WESTERN ATLAS INTERNATIONAL Inc. (Western Geophysical)
(Petroleum Exploration)

Position: Technician / Mechanic

Duty Summary:
This was a hands-on field position – working in Bolivia & Venezuela. Apart from normal breakdown repairs, duties included
- Training up operators on the use of new machinery
- Initiating preventative and long term maintenance procedures
- Instructing operators and drivers on the safe use of equipment
- Attended 2 week training course in United States on vibration electronics

Major Equipment:
- 25 Ton articulated all terrain vibration machines
- 20 Ton articulated scrub cutters
- Fleet of Toyota 4WD vehicles (diesel & gasoline)
- 130 HP electrical power generating units

Aug'93 – June'97

TEC-TOTAL Cia. Ltd. - Quito - ECUADOR
(Petroleum Services)
Company had a maintenance contract with the state owned oil company, PETROINDUSTRIAL, to maintain and operate 7 field gas and liquid capturing stations (Including gas lift) and gas refinery.
Position: Maintenance Engineer

Duty Summary:
- Supervision of 2 foremen and 70 workers - including mechanics, electricians, instrument fitters and equipment operators

Duties included:
- Training the local workforce on proper maintenance and overhauling procedures
- Refurbishing and modernising old plant and equipment
- Implementing preventative and predictive maintenance planning systems
- Maintenance scheduling and plant shutdown planning
- Condition monitoring of equipment
- Updating the computerised maintenance planning system

Major Equipment:
- 1500 HP 12 cyl reciprocating natural gas engines - running 2 stage 5000 cfm (700 psi) reciprocating compressors
- 2000 HP 16 cyl reciprocating natural gas engines - running 4 stage 5000 cfm (1400 psi) reciprocating compressors (for gas lift)
- 5000 HP gas turbine electrical generator
- 1500 HP gas turbines running 900 lb/min propane refrigerant compressors

Project work:
Preparing tenders
- For the installation of a liquids modular plant refinery for one of the stations.
- For a new liquids and gas recovery plant at another.

Jun'89 - Mar'92

POSEIDON GOLD LTD - Tennant Creek N.T. - AUSTRALIA
(Underground Gold Mine)

Position: Chief Engineer

Duty Summary:
- Responsible for maintenance activities and project works in the processing mill and underground mine.

Duties included:
- The supervision of 2 foremen, 20 tradesmen, and one young Project Engineer.
- Preparation of yearly budgets and project plans.
- Selection and purchasing of new mill and mine equipment.
- Installation of computerized maintenance planning systems.
- Upgrading of the mill to increase tonnage and gold recovery.
- Upgrading and extending of surface and underground High Voltage electric's. (33kV / 11kV / 415V)
- Upgrading the underground dewatering system.
- Upgrading the mine compressed air supply.

Dec'87 - Dec'88

KHAFS DAGRA WHEAT PROJECT - SAUDI ARABIA
(100 sq. km Wheat Farm)

Position: Farm Engineer

Duty Summary:
- To obtain better availability of plant and to instigate long-term servicing and maintenance procedures.
- This mainly involved training the local workforce on overhauling 400 HP diesel engines and bore pumps.

Major Equipment:
- 24 Pivot sprinklers - each with a 400 HP engine, bore pump, gearhead and 415V generator.
- Mobile equipment included - tractors, harvesters, fertilizer spreaders, seed drills, balers, service trucks, bulldozers.

Aug'86 - Aug'87

GOLDSWORTHY MINING LTD - Shay Gap W.A. - AUSTRALIA
(Open-cut Iron Ore)

Position: Maintenance Engineer

Duty Summary:
- Responsible for the supervision of 4 foremen and 60 tradesmen.

Duties included:
Apart from normal Admin. Duties; reports etc.
- Planning intermediate and long-term equipment servicing and major overhauls.
- Investigating maintenance problems and liasoning with outside equipment repairers.
- Rationalizing spare parts.
- Organizing in-house training courses.

Major Equipment:
- 120 ton haul trucks, Cat 992 loaders,
- Cat D9 dozers, B.E. 60R rotary drill rigs,
- P&H 1900 electric shovels, 15 MW diesel power station.
- 2 x 400 HP water chillers for centeralised town air conditioning

Aug'85 - Aug'86

SCM CHEMICALS LTD - Bunbury W.A. - AUSTRALIA
(Pigment Chemical Refinery)

Position: Maintenance Engineer

Duty Summary:
- Developed a computerized maintenance planning system for the plant.
- Developed servicing specifications for critical plant.
- Planned major plant shutdowns for maintenance work.
- Developed projects from design and construction to commissioning.

Major Equipment:
- 22,000 kg/hr coal fired boiler and associated steam equipment, rotary kilns, chemical process pumps, rotary vacuum filters, various types of mills, 25 tonne gantry process cranes

Dec'80 - Aug'85

ELECTROLYTIC ZINC Co. W.C. MINES - Rosebery Tas. - AUSTRALIA
(Underground Silver, Lead, Zinc, Copper, Gold)

Position 4: Services Engineer (18 months)

Duty Summary:
- Responsible for the supervision of 5 foremen and 120 tradesmen.

Duties included:
- Preparation of yearly budgets and reports.
- Organizing major plant shutdowns.

Major Equipment:
- A large central workshop for repairing of mill equipment and fabrication of major structural projects.
- Maintaining underground pump stations, electric locomotives and ventilation fans.
- Overhauling rock drills & diamond drill rigs.
- Underground winders, ropes and shaft conveyances.
- 10 km aerial ropeway and surface rail haulage system.
- Maintaining a 5 MW diesel emergency power station,17,000 cfm compressor station, boiler plant, water supply pumps.
- Maintaining a town of 2,000 people.

Position 3: Project Engineer (12 months)

Duty Summary:
- Preparation of yearly capital budgets.
- Developing projects from design through to erection and commissioning.
- Specifying, selecting and purchasing new mining and metallurgical equipment.

Position 2: Assistant Mechanical Engineer (15 months)

Duty Summary:
- Assisted Sectional Engineers with maintenance problems and acted as a relief supervisor.
- Developed a remote controlled underground electric loader.
- Ran a hydraulics course for tradesmen.
- Rationalized equipment spare parts.

Position 1:Underground Diesel Equipment Maintenance Foreman (12 months)

Duty Summary:
- Responsible for the supervision of 12 tradesmen.

Major Equipment:
- Maintaining a fleet of underground trucks, loaders, jumbo drilling rigs, service vehicles, raise borer.

Apr'79 - Dec'80

OGDEN INDUSTRIES - Huntingdale Vic. - AUSTRALIA
(Mass production of aluminum ladders, padlocks, door fittings, wheel barrows)

Position: Production Planner

Duty Summary:
- Responsible for planning large batch production runs - each lasting approximately 3 months.

Duties included:
- Time and methods analysis.
- Estimating production and materials costs for new products.
- Determining quality control requirements.
- Product development and testing.
- Reviewing designs and production techniques.

Pre-graduation work experience (Vacation work, whilst doing full-time study)

- Trades Assistant to toolmakers - AMH TOOLING Moorabin Vic. - AUSTRALIA
- Machinist - CONSOLIDATED CASTORS Mentone Vic. - AUSTRALIA
- Purchasing Officer - INDUSTRIAL HARDWARE Springvale Vic. - AUSTRALIA

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9201 to 9250 of 15512)

Go to Search Parameters...

Brief Description

Store keeper (SAP, Computer skill, safety training and certification)

4 years underground mining experience, current MSHA, 2009 Underground Blasting Training Course, Underground Core Skills Program,

I have diploma in Surveying and 4 years exp in High rising Bulidings. I can operate all kind of Survey instruments

Diploma in production engg.and nace level-1 & 2 are comleted

Currently I am working as DCS plant operator at Distillation unit, having capacity 27000 BPD.

Preparation of Static Equipment Drawings Using Microstation & Autocad

Inlet gas system,TEG Regeneration and Treating system,Amine Regeneration and Treating unit..

Former GS 15, U.S. Government Contract Officer (KO) & Administrative Contract Officer (ACO)¡Xcurrent Senior Level Professional seeking a Project/Program Management and or Business Development opportunity

Oil Drilling & Production (Quality-Inspection & Maintenance and Auditing)

Seeking a job position in the field of Instrumentation, with challenging opportunities to further enhance and optimize leadership and technical capabilities and to contribute to the success of my employer in my fullest interest and potential

Chemical Engineer with 7 years of experience in Chloralkali Plant and Caustic Concentration Flaking/Prilling Unit

I am currently a final year M.Sc. Student in Electrical Engineering Department, King Fahd University of Petroleum and Minerals (KFUPM). My graduation is expected by May 2003 and I will be available by July 2003.

BSC CHEMISTRY / DIPLOMA IN HSE + 02 YEARS EXPERIENCE

I am working in RALLIS INDIA LIMITED for 10 years in SAP SD ERP .

Mechanical Engineer - 20+ years maintenance experience in mining - both Underground & O/Cut. Also Processing Plant maintenance & Project Management on new Greenfields plants.

HSE Training,Risk Assessement,Management,Field Safety,Loss Prevention

Aws Cwi Welding Inspector / Ndt Inspector / QA-QC Inspector

CERTIFIED IN HEAVY EQUIPMENT OPERATION, EXPERIENCED LABOR WORKER, KNOWLEDGE OF SAFETY AND TRAINED IN MSHAW, CPR CERTIFIED,CUSTOMER SERVICE SKILLS, ETC.

Implementing the health and safety plan. Daily Tool-Box talks prior to commencement of work. Inductions of new staff members on site. Ensuring that every team member wears PPE equipment and that it is worn correctly. Specified to each projects’ requirements.

Working on following systems:- *FMC smith flow meters, accuload loading pre-set batch contllores, *Rosemount saab tank radar system. *Enraf additive injector system. *MSA gas monitoring system{ suprema ,9010,9020 etc}.

Level 1 OGPO looking for work in northeastern B.C.

LAND SURVEYOR

Seventeen years experience in electrical engineering design, construction supervision, commissioning & start-up for major international EPC and Consulting firms specialized in power generation, T & D grids, oil and gas petrochemical fields

Expert Contracts and Business Development Manager with more than 20 years of experience with major oil/gas operators in the Middle East and exposure to Contracts Management from start till award and post award, establishing new ventues in drilling, engineering and related fields, & procurement.i

1.2 years of Experience as a Piping Engineer, 2 Year of Experience in PDS Modeling

I am a Controls and Instrumentation engineer from Pakistan. I have 3 year experience

Project Controller with extensive experience of implementation and operation of project management systems. Detailed knowledge of C/SCSC & EVM systems. Experience in Petro-Chem, Oil & Gas downstream distribution, Rail, Defence and Civil Engineering sectors. Extensive procurement experience.

Reservoir Engineer

I graduated from Bandung Institute of Technology (ITB) majoring Chemical Engineering on March 2004 with GPA 2,92. I have experiences as a chemical tanker chartering team and process engineer.

Qualification: B. Sc. Hons Biotechnology

I have confident, good communication skill, able to adapt to new environment very fast.

B.Tech (APE) University of Petroleum and Energy Studies, Dehradun (2005-2009) CGPA:-2.98/6 (till 6th sem)

I Am Computer Engineer And I would like to go in Automation field

Summary of Qualifications,Combined experience in Industrial Refrigeration Technician / Electrician Technician in the Pharmaceutical Industry,Petro chemistry, Building Management System (BMS), Ship Systems, Maintenance and Troubleshooting.

I am Mine Surveyor with more than five years experience in the Zimbabwean mining industry. I established survey offices at Sino-Zimbabwe Cement Company and Murowa Diamonds being the first permanent employed surveyor at the Mines. I have experience in Surpac, AutoCad and Vulcan mining softwares.

Design engineer

Previously employed to Rusal (Guyana) as a Planning Manager

Off Shore Work

I am a National Diploma graduate in Emergency Medical Care (N.DIP EMC) from the University of Johannesburg (previously Technikon Witwatersrand).

Analyze, resolve, and log all issues by email, phone, and face-face sessions with the agent. Reviewed recorded calls between the agent and clients to insure quality support. Encourage and motivate the agents to take advantage of training available through Shell. Identify & resolved issues.

Fresh electronics and instrumentation engineering graduate with good academic records.

I have exp. 16 months as fire&safty supervisor, 18 months as a electrical technician

25+ yrs progressive exp. as a Sr. Supervisory Planning/Scheduling & Project Control Engr/Mngr with Risk/Contracts Exp, Int'l w/Utilities, EPC Firms/Consultants, Turnkey OEMs and Constructors within the Energy Sector. P3 Ver.3.1, Primavera P3e/cVer.5, 6.2,Pertmaster, Claim Digger, MS Office, Acrobat

Fifty Years Total Experience in process engineering and technology development. Including More Than Twenty Years Process Engineering Experience on petroleum refinery, oil & gas production and petrochemical projects. Experience includes process simulation software Hysys/Pro II/Dynsim/Aspen.

D10 dozer, 637 push-poll scraper, Loaders, Crusher, Track-hoe, Blade, ect. Maintain equipment, water lines, sewer lines, house pads, Road construction, Airport construction, GPS. ect...

Petroleum Geologist with 20 years international experience

The majority of my 15 years of experience has been applied to inspecting in-service pressure equipment and piping in a refinery setting. I am an excellent communicator with exceptional organizational skills geared toward inspection, NDE planning and crew leadership.

Exploration Geologist with 10 years of diversified experience

stat engineer (oil and gas exploration) , drilling rig move fishing

Pro/ENGINEER, AutoCAD, SAS, Microsoft Office, MSC NASTRAN

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 [ 185 ] 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out