Resume - QA/QC Electrical Engineer

Misco Jobs

Resume #84225

CONTACT INFORMATION:
View contact information...

A. PERSONAL DETAIL
Place / Date of Birth: Duri, 4 February 1966
Sex: Male
Marital Status: Married + (2 Children)
Healthy: Excellent
Passport No.: AH 531076

B. EDUCATION BACKGROUND

1. Primary School: SDN 2 Caltex Duri – Riau 1979
2. Secondary School: SMPN 1 Caltex Duri – Riau 1982
3. Senior High School: SMAN 1 Caltex Duri – Riau 1985
4. Engineer Certificate: University in Bandung – West Java
(Graduated Of Technical Division) 1993
Electrical Degree.
C. SKILLS

1. Thorough knowledge of Electrical Principles.
2. Computer literate.
3. Speak and Write English.

D. WORK EXPERIENCE (briefly)

Engineering Abilities: To manage the electrical installation project Electrical Industry; Refinery, Mining and Combine Cycle work on site, Field Design Electrical System pre-commissioning installation. Supervise Installation of High voltage equipment for Switchyard, Transmission line and, Substation. Medium and low voltage Switch gear, Circuit Breakers and MCC with controls and relay systems.
QA/QC Abilities: QA/QC Documentation, Electrical Specification and Installation to commissioning Procedures. Inspection and testing all electrical equipment in accordance to assist in updating Operations Function codes, standards and procedure are ANSI (American National Standard Institute), NEC (National Electrical Code), NEMA (National Electrical Manufactures Association).
PROFESIONAL EXPERIENCES (1992 – 2008)
15 (Fifteen) years experience on Electrical Systems, Maintenance Service and Construction – Plant for Petrochemical, Nickel / gold Mining, Oil and Gas, On-Shore & Off- Shore.

D.14 British Petroleum
Designation: QA/QC - E&I Inspector
Job Location: Guna Nusa Fabricator Cilegon & LNG Tangguh Papua.
Project: BP Tangguh GPF Project (Constructed & Installation Two Platforms - FPSO) & LNG Tangguh Onshore Project ; 2 Train, 3 unit Gas Turbine Power Generation
Reason for leaving: Project completion – 2006 - 2008

Facility Portion of Tangguh LNG Projects Are:
Two (2) Platforms (GPF), Two(2) Train Process Facilities and Three Units Emergency Diesel Generators, Three Unit Gas Turbines & Boilers 3 x 35 MW, and Utiliy Facilities + Main Substation and 8 (Eight) Substation. Perform routine inspection and document result in accordance with approved Project Owner procedures and specifications.

* HEALTH AND SAFETY
* Take leadership in assuring that electrical activities are performed safely and in accordance with the LNG safety policies
* Knowledgeable of and audit compliance to BP Safety and Maintenance Procedures HSE regulations
* Provide guidance for safe work practices and personal protective equipment (PPE) used by crafts and contractors
* Ensure proper documentation of special operating and maintenance instructions associated with electrical equipment
* Knowledgeable of the following:
- National Electric Code
- National Electric Safety Code
- IEEE Documents and White pages

D.13 Tripatra/Fluor Chevron – Duri.
Designation: SLN Construction Superintendent Supervision
Job Location: Chevron Duri (Oil & Gas)
Project name: Flexible Project Management
Present: April. 2006 – Dec'26. 2006
Reason for leaving: Project completion – 2006

D.12 Combine Cycle Gas Turbine Suban Pahse 2 Gas Plan Project
Designated: Pre-Commissioning & Commissioning and Facility Acceptance Coordinator.
Reason for leaving: Completion of Contract (March 2006).
PT. Thiess Contractors Indonesia / Conoco Phillips.
Expansion to an existing Gas Production Facility.

DUTIES AND RESPONSIBILITY
Consist of review of quotations from the vendor and conduct T.B.E technical Bid Evaluations. Witness F.A.T and at the conclusion of site installation conduct S.A.T.
Source calibration equipment for site process instrumentation and personnel.
My team consists of one site Instrument Engineer and one site Electrical engineer along with a crew of 70 personnel to carry out site installation and site acceptance tests by means of a Quality Controlled hand over system to the client.
I then had the over all responsibility of supervising other Engineers in the Mechanical and Piping fields to full fill engineering interface between the client and the J.V partner Hyundai Engineering. Cleared all punch lists.

D. 11 Construction Service CHEVRON Project 2004
Thiess Contractors Indonesia.
Designated: Estimator Engineer and Monitoring E/I Construction Activities
Job Location: Caltex Construction Service Duri Project, Oil and Gas
Present: February.' 04. 2004 – March' 01. 2006

DUTIES AND RESPONSIBILITY
Handling some of electrical & instrumentation, civil work and mechanical work order incoming from Client ( Chevron Pacific Indonesia) to estimate / Calculate and negotiate. To conduct Kick of meeting Work Order Approved between Client and THIESS Contractor C/W Construction Teams. Witness F.A.T and at the conclusion of site installation conduct S.A.T. Organize and supervise Electrical & Instrument construction activities, quality, testing, documentation, Pre-commissioning, commissioning and start-up.

D. 10 ABERDEEN - (FPSO) Off-shore oil and Gas Industry, Shell
Power Generator System Installation' 2003
Designated: Operating Engineer - Electrical Inspector Eng. (QA/QC)
Job Location: North East of Aberdeen (Shell Oil Company – Aggreko).
Reason for leaving: Project completion (July 24' 02 – Jun' 03).

DUTIES AND RESPONSIBILITY
Full Inspection and monitoring Portable Power Plant Installation, Diesel Power Generator Systems (300 KW / 200 MW) Multi Voltage /50Hz/ 60Hz and Load Banks Precision testing for Both Resistive/ Reactive Loads (2.5 Mw – 100 Mw).
Perform routine inspection and document result in accordance with approved Project Owner procedures and specifications.

D.09 PT. Caltex Pacific Indonesia Steam Flood project
Designated: QA/QC – Electrical & Instrumentation Inspector/ Engineering
(Pre-commissioning and Commissioning) Owner Representative
Job Location: Central Gathering Station – 10. Duri Project.
Oil & Gas Facilities – Sumatra.
Reason for leaving: Project completion. (September. 04' 00 – September. 2001

Combine Cycle & Gathering System Project:
Coordinated construction activities 3 x 100 MW Siemens Westinghouse combustion turbines 501D.
Controlled daily activities of the sub-contractor PT. Siemens Indonesia on schedule requirement and engineering interface. Respond to (RFI) request for information and worked with engineering in Head Office.
In addition to my task of completing electrical system for hand over, I controlled the following: E & I, millwright, Building's, and Painting. Compiled all check sheets, involved with pre commissioning, commissioning and start up achieved contractual acceptance of plant hand over by the client.

DUTIES AND RESPONSIBILITY
1. QA/QC documentation and review Contractor construction electrical procedures.
2. Supervise and Monitor Installation of Cable, Cable tray, Lighting, Distribution control panel, all electrical equipment and Grounding system, etc.
3. Perform routine inspection and document result in accordance with approved CPI procedures.
4. Monitor activities of supervision contractor and construction Contractors.
5. Witness and verify Continuity, Merger, HI-POT and Component testing for Medium Voltage & Low Voltage equipment.
6. Monitor Quality control on construction progress activities.
7. Responsible from equipment installation and continue energizing of electrical equipment to pre-commissioning and commissioning.
8. Issued punch listing for out standing works.
9. Review Tested documentation, witness and accept all required Testing for CPI (Client).
10. Etc

D.8 Middle East UAE. Oil Refinery & Power Generation Plant
Designated: Electrical Maintenance Eng.
Job Location: Al – Mubaraz island – (FPSO) Abu Dhabi Oil & Gas Company (ADOC)
Abu Dhabi – GULF (UAE).
Reason for Leaving: Project completion. (Augustus'04' 99 – April. 04' 00).

DUTIES AND RESPONSIBILITY
Maintenance and operational of plant facilities. Turbine generator power supply to Transformer, and than going to switch gear, from switch gear going to ALL WELL HEADS Platform / Central Platform, MCC, Distribution Panel, Motor Electric Over Hauls, Lighting and lighting Panels Distribution, all Electrical Equipment and Modification.

D.7 Newmont Gold Mining (COMBINE CYCLE) Project
Designated: Field Engineer Electrical and Quality Control Engineer
Job Location: PT. Flour Daniel – Sumbawa Batu Hijau Project (Power Plan &
Gold Mining) New-Mont Nusa Tenggara.
Reason for Leaving: Completion of Project. (October 1998 – July'30. 99)

Power Facility Portion of Batu of Batu Hijau Four (4) 28 MW Coal Unit and Nine (9) Diesel Generator Units, and a 150 KV Transmission Line. Project Cost US $ 1.8 Billion.

Combine Cycle Project ( Coal Power House & Diesel Generator)
DUKE FLOUR DANIEL INDONESIA
Coordinated all construction activities on a diesel powered power plant. (Associated Switch Yard 11 KV-150 KV).
Phase two of the contract, coal-fired power plant with four turbines. Responsible for electrical trades
With Electrical speciallist Commissioning bringing total to a round 25 personnel.
Controlled all QA/QC documentation. Involved with commissioning team for client hand over, and acceptance.
DUTIES AND RESPONSIBILTY
1. Manage the electrical Contractors daily construction activities, schedule and progress.
2. QA/QC documentation and specification and verify, contractor procedures.
3. Generate Field Change Request (FCR), Field Purchase Request (FPR) and Request for Information (RFI). Inspect and approve Electrical Installation on site.
4. Witness and verify Continuity, Merger, HI-POT and component testing for Medium voltage & Low voltage equipment.
5. Inspection of Connection and Installation switch gear and MCC panel.
6. Expedite materials for construction and issue field instruction to contractor.
7. Supervise and Inspect Subcontractor (SIEMENS) construction activities.
8. Witness Pre commissioning and commissioning testing.
9. Review all test packages; prepare QA/QC documentation for Turn over to client.
D.6 INCO Nickel Mining Project, Flour Daniel
Designated: QA/QC - E/I Engineer.
Job Location: PT. SNEF/ Fluor Daniel – Soroako, PT. Inco Expansion Project
(Soroako South Sulawesi) (Feb 1998 – Oct 1998).
Reason for Leaving: Project completion 1998 – Certificate.

DUTIES AND RESPONSIBILITY
1. Responsible for project operational safety requirement
2. QA/QC documentation and review contractor installation procedures.
3. Implement & enforce all company policies, procedures and practices.
4. Planing construction electrical and Instrumentation schedule.
5. Monitor construction activities and progress.
6. Witness and monitor electrical and Instrumentation equipment testing.
7. Responsible for test packages documentation from pre-commissioning to final hand over to client.
8.
D. 5 UNOCAL' 76 Combine Cycle Project Unit # 4. 5. 6, Bectel
Designated: Electrical Engineer for Start-up to Commissioning/ Owner Represent.
Job location: Unocal Salak Geothermal Project Unit # 4,5 & 6 (West Java)
Reason for Leaving: Project completion (1998) / Certificate.

DUTIES AND RESPONSIBILITY
1. Perform evaluation and recommendation for power generation project electrical operation system start-up to commissioning acceptance.
2. Assigned as Commissioning Electrical Engineer. Trouble shooting, maintenance for power plant and distribution during shut-down Unit # 4,5,6 and MCC panel and local panel for lighting Power Generation Facility Area and-Resource Production Facility Area.
3. Responsibility too for cleaning ISO-phase Bus Duck and prepared, termination element Space heater and confirmation main transformer. Install and link grounding clutiss on generator out put for Turbine Generator Unit # 4, 5, 6.
4. Inspected and Cleaned Unit # 400, 500, 600 Lube oil Clarifier Heaters.
5. Verify Drawing & specification of Electrical Equipment.
6. QA/QC Electrical Documentation.
7. Verify Punch listing for all Electrical works prior to final acceptance.
8. Planed schedule for electrical start-up, cables modification, installation and other construction activities.
D.4 AMOCO Petrochemical Project
Designated: QA/QC. Electrical Engineer
Job Location: Merak – PTA 1 AMOCO Petrochemical Plant Project
Cilegon – West – Java / PT. IKPT – CHIYODA – J/O
Reason for Leaving: Project Completion (1997) – Certificate.

DUTIES AND RESPONSIBILITY
1. Supervise and Monitor Installation of Cable, cable tray, Lighting, Distribution control panel, electrical equipment and Grounding system, etc
2. Prepare and Verify construction Drawing, Specification and installation procedures of Electrical Equipment.
3. Supervise & Inspection of electrical equipment Installation, testing to - commissioning.
4. Witness cable termination for Medium and Low voltage Power to Switch Gear, MCC, MV/LV electrical Motor.
5. Responsible to QA/QC and Construction Managers.

D.3 Unocal'76 Geothermal power Generator Project Unit # 4, 5 & 6.
Designated: Field Engineer / Engineering Dept.
Job Location: Salak Geothermal Project (West Java)
Fluor Daniel JO IKPT.
Reason for Leaving: Project completion (1996 – 1997) – Certificate.

Combine Cycle Geothermal Power Generation
Directed construction activities on caterpillar generators series 3512.
Controlled all QA/CC documentation pre commissioning, commissioning and start up.
I controlled a very small and dedicated local craft force to achieve start up in a very isolated and troubled province.
We achieved start up on schedule and I trained local staff to switch over to maintenance duties.

DUTIES AND RESPONSIBILITY
1. Verify all Drawings and Specification of Electrical and Instrument.
2. Support the project program for verifying construction quality.
3. Supervision and Inspection to Subcontractor in construction Activity Installation and Hook-Up some Instrument Equipment and Planning Installation Electrical Motor Connection, Power Supply and Compressor.
4. Handling RFI from Subcontractor and Connected all Paper Work
5. Reporting to Engineering Manager.

D.2 Mivan Apartment Project.
Designated: QA/QC – Electrical Engineer.
Job location: Dukuh Golf Apartment Project, Kemayoran,
Jakarta Utara
Leaving for Job: Project completion (1995 – 1996) - Certificate.

DUTIES AND RESPONBILITY
1. Verify Drawing, Specification and Equipment.
2. Inspection of connection pooller and control cables.
3. Supervisor of Installation cable Tray, Lighting and Light distribution panels.
4. Direct Medium Voltage & Low Voltage Equipment testing (continuity, Megger test and HI-pot test. (Feeder, pncc & swgr panels).
5. Prepare document & record or documentation for turn over package)

D.1 Unocal Power Generation Project Unit # 123.
Designated: Unocal Electrical and Instrument Supervision.
Job Location: Gunung Salak Geothermal Plant Project Unit – 1,2,3, (West –
Java) UNOCAL' 76.
Reason for Leaving: Complete Project (1993) – Certificate.

DUTIES AND RESPOSIBILITY
1. Supervise to Subcontractor in Construction Activity Installation in Hook up all Instruments on general Electric (Gas Turbine) Ingersoll (Condensate Pump) and Installation such (Installation Cable Tray). CCS (Compressor Anti Surge Control), PLC.
2. Control all Drawing & Specification of electrical and Instrument.
3. Supervises of Connection all Electrical Motor, Blacke Dur (welding Procedure Specification) Bailey Controls (West Pump Station) Pneumatic Products (Installation Operation & Maintenance).
4. Inspection & Check for Pre Commissioning & Commissioning.
5. Report to Construction Manager

An ambitious and experienced electrical engineer with significant industry knowledge gained via working continuously with management teams, coordination with supervision of various projects Off-Shore, On-Shore and Construction. Pursue a career that will provide a rule of:
E & I Inspection, Construction Manager & QA/ QC manager

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1301 to 1350 of 15509)

Go to Search Parameters...

Brief Description

Electrical Maintenance in Petrochemical Industry

Extensive and diversified experience in the field of Onshore & Offshore Oil &Gas, Petrochemical, Refinery, Chemical Plants for FEED, BASIC Design & Detail Engineering for various types of Static Equipments viz. Pressure Vessels, Columns (CS & CLAD), Towers, Reactors, Heat exchangers, steel structure

I am male, 42 years of age and I was working with ASL Marine Holding, Tiong Woon Corporation Holding Ltd, ASL Shipyard Pte Ltd, Beng Soon Machinery Pte Ltd, PAE Singapore Pte Ltd, Unocal Petroleum Myanmar, Amoco Petroleum Myanmar, BHP Petroleum Myanmar. I had my experiences Asst: Superintendent, Wor

I´m Chief OFFicer wiyh tanker experience and Other Ships like Tug Boat, whit 7 years at sea, 10 yeras in oil and marine industry, Ship Yards, Port Operations, Manager in Logistics Deparment, Sipply Chain, Desk and Administrative work.

Diverse background in underground & surface exploration, underground production & ore control, resource modeling, geologic mapping, core & chip logging, process metallurgy & mineralogy, mineral analysis & geochemistry, laboratory operations, project management, mine planning, crew supervision

Telecom

Mechanical senior technician,• Carry out maintenance work independently in the repair, overhaul, troubleshooting, alignment of rotating equipment like (pumps, compressors, fans …), spares requirement…

Dear Sir. I would like to forward my resume with this letter to yourself in the hope to find an entry level position in your respected company like a electro engineer... My main skills are hard working; take good care of my job & keen to progress.

I am a chemical engineer having 17 years of work experience in India and Bahrain at various management levels in process engineering and operations, troubleshooting of of Fluidized catalytic cracking, gas compression, concentration units, and hydro processing units, gas treatment & sulphur recovery

QA/QC Instrumentation Engineer / Inspector - 17 years experience in Oil & Gas (16+ years in Middle East with Saudi Aramco, PDO, KNPC, ADNOC & RAS LAFFAN), Certified Lead Auditor, GCC & International Driving License, Well versant with Codes & Standards

Managemen and Multidiscipline Engineerign Coordination of Oil & Gas Industry |FEED and Detail Engineering Projects.

Dipl.-Engineer (Uni); Mining Ingenieer; underground Engineer

To find a position, as a full-time employee, within either a human or veterinary biotechnology company involved in the research and development of vaccines, immunobiotics, or immunotherapeutics. Strengths include Product Development, Business Development, and Company/Strategic Development.

unigraphics designer drafter

I am a Senior DCS/Instrument engineer with 19 years of experience in Project engineering, Construction, Commissioning and Maintenance support of Oil/Gas & Petro chemical industries.

Safety/HSE Manager

Free! Scheduler EPC Gas & Oil P3, P5 and P6

Instrument, production,control room technician, shift supervisor on chemical plant. worked off shore on shell dunlin,cormarant and nelson, british gas morecambe bay,conoco sns, wellhead control,subsea. on shore i.c.i., dupont, ukaea, power stations. Tricon , modicon plclc

Rotational Power Infrastructure O&M, QA/QC & International ISO, OSHA (NEBOSH)

Extensive field and office Piping Design experience: including Detail Design, Construction, Supervisory and Management levels as well as; the coordination of design effort on projects, both in the Supervision of office and field personnel. The writing of piping and pipe support specifications (both

At present I am working with EASA HUSAIN AL-YOUSIFI & SONS CO., KUWAIT as a Secretary to Project Engineer from 15th February, 2006.

I am an experienced and qualified supervisor/manager with long term knowledge of the manufacturing of construction materials.

Free! Safety professional with proven national and international track record, demonstrated, through a successful 14-year safety and health management career, ability to lead poorly performing facilities to top quartile performance. Experience at corporate division, and facility levels.

Mechanical Engineer mines maintenance

Technical Manager Maintenance Planner, Semisubmerisble engineer, hydraulic engineer, diesel engineer

I have worked in the oilfield for 39 yrs as seaman, bosun, crane op, and barge engineer/master.

I am a sri lankan working in oman -presently in the field building services as an engineer. Capable of designing - cold & hot water supply systems, sanitary plumbing stsems and fire fighting systems)

P.ENG with 14 years experience in reservoir management,reservoir engineering analysis, economics evaluation,well testing

•Personnel Supervision / Training / Evaluation

Offshore Crane Operator/Technician/ Lifting Specialist

Pressure Welder, Pipe Welder with 20+ yrs experience, Hard working

Skilled technician with 30 years experience.

I have been in Truss deaign,layouts,and engineering for approx.36 years. I have experience in single family commercial,spealizing in multifamily design of beams, componets,floors and roof trusses

Total 14 years of Post Qualification Experience out of which 4 years of Experience in Oil and Gas & Refinery Piping Design and 10 years in Power Plant Piping. Total Experience consists of Piping Detail Engineer-ing, Physical Design Deliverables and Stress Analysis

A self motivated and result oriented professional with 11 years experience in various Industries such as Oil & Gas drilling and Community Services using latest technologies. In recent past I am working in the areas of drilling, administration, customer relations and services and training/development

Senior Plant Metallurgist

Sr. Piping Designer/Checker

I am a motivated individual with a high degree of HSE knowledge and operations integrity & commitment, I have operations & maintenance experience working in the oil, gas & chemical industry (without an OSHA recordable incident)

Chemical Engineer 25+ years experience in SCADA / PLC based Control Systems

Plant commissioning, trouble shooting, revamps, cost reduction, productivity improvements

Logistics and Operations Support included construction management transportation and Procurement Management FCILT MS UC Berkeley in transportation engineering with 24 years experience, recent 10 in Oil and Gas

20+ years RE experience in brownfields, greenfields, offshore, onshore, dry gas, gas condensate, light, medium and heavy oil, sand and carbonate. Expert in WT design and interpretation, Reservoir Simulation, Horizontal well, Tight Gas, Hydraulic Fracture,Fractured Carbonate, EOR (WAG, CO2, Thermal)

Total of 33 yrs exp with 15 yrs international exp in oil and gas as wellsite/geosteering geologist in Carbonate and Clastic reservoirs, gas detection/mud logging, description of cores and drill cuttings, interpretation and correlation of electrical logs

HSE Process Safety

QA/QC Electrical Engineer

Fourteen plus years of international experience in the wireline logging industry with one of the leading oilfield service providers. Worked my way up from Wireline Field Engineer through several roles to my latest job as a Field Service Manager

Total station operator

over fifteen years of working experience in oil & gas , onshore and offshore facilities

Desired to work in an organization that recognizes and values individual contribution in a professionally challenging way which will broaden the fine skills and will provide opportunities for continues growth and development with utmost devotion and sincerity, there by strengthen the organization to

Professional and top operational Managerial experience in Accounting, Financial Planning, and General Management, included board position and a senior member of top managerial team of a Mid-scale British Manufacturing Organization, based in Kenya.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 [ 27 ] 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out