Resume - Three years diploma in Civil Engineering (Technical Education Board of Punjab Pa...

Misco Jobs

Resume #84230

CONTACT INFORMATION:
View contact information...

BODYCOTE TESTING LIMITED, ABU DHABI
APRIL, 2008 TO TILL NOW
Project Name: SHAHAMA – SAADIAYT FREEWAY PROJECT 1A & 2A
Consultant: HALCROW INTERNATIONAL
Position: LAB. SUPERVISOR
Responsibilities:
Quality Control testing of construction material in the disciplines of Soil, Aggregate, Asphaltic Concrete Mix Design& JMFs, Cement, Steal & Pipes in the Field and Lab.
Quality control & testing of Various Concrete Mix use in High rise Building.
Testing of Roads Irregularity Asphalt Surface (Evenness) for Ferrari Race.
Participate in creative implementation of project quality plans, procedures, work instructions, inspection, checklist, quality records, and preparation of progress reports.
Performance & Audit to ensure that an adequate QA/QC system is in place, confirmed effectiveness dded automatically from corresponding field above. If you used symbols/special characters such as bulletted lists make sure they are properly displayed. We suggest you to replace bulleted list symbols with minus symbol (-).

------------

OMAN GULF COMPANY LLC - OMAN
JANUARY, 2006 TO SEPTEMBER, 2007
Project Name: DESIGN AND CONST. OF ROADS SHALIM-SHOWAYMIAH – OMAN
Consultant:
Position: SITE AGENT (APM)

Responsibilities:
Participate in Management, Execuiting and Implementations of plans progressive within given schedule and Budget. Assist with inspection of completed work, prepare snag list and hand over to operating authority.
Assist in Preparation of as built drawing and quality controlling of the entire finishing item for project
Held workshops to ensure safe environment and comply with standard safety plans throughout the project.
Preparation & supervising of material submittals mix designs for concrete, Asphalt JMF, s.
ASSOCIATE CONSULTANCY CENTER LIMITED - PAKISTAN
AUGUST, 2004 TO JANUARY, 2006
Project Name: LAHORE – FAISALABAD DUAL CARRIAGEWAY BOT.
Position: SR. MAT. INSPECTOR

Responsibilities:
Supervision and Trail Mix design of hardened &fresh concrete
Supervision and Trail Mix design of Asphaltic Concrete & various types of JMF.
Supervision of Stressing, launching and concerting of Girders.
Quality Control testing of construction material in the disciplines of Soil, Asphalt, Cement, Steal & Pipes both in the Field and Lab comply with the required standards.
Preparation of weekly progress reports and checklist.
Coordinate as a team member in all technical matter to my superior.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1851 to 1900 of 15312)

Go to Search Parameters...

Brief Description

Senior Mechanical Engineer (M.Sc.) having experience as plant manager and project manager, specialist in mining, safety glass, manufacturing plant and brewery investments.

Detailed Structural designs of Civil Structures(RCC structure i,e, Buildings(Multi-storied office and residential), Roads, Bridges, Culverts, earth retaining structures(Retaining wall), Dams, rig & machinery foundations for Gas exploration

More than 10 years’ experience of coordinating structural projects and technology development acquired during the Master and Doctor Courses in Civil Engineering and working as engineer in construction, aerospace, offshore and onshore industries.

Working as a Rotating Machinery Specialist with specialist skills in machinery Componenant condition monitoring by Vibration analysis (CSI RBMware), Bentley Nevada DM2000 online monitoring system, Adre data collection, Flexware performance analysis, Ultrasonic check by CSI sonic scan and etc.

Strengths: detail oriented, flexible, analytical, self-motivated, adaptable, effective communicator and articulate. Experience in field drilling operation management with extensive hands-on technical, administrative and managerial functions; drilling technology assessment & implementation, contract

Presently working as Site Supt. Civil here in the construction of Khursaniyah Gas Plant (KGP) at NGL Trains 1 & 2, Saudi Arabia with Saudi ARAMCO. Representing the client in all civil works aspect of the work, I supervise two (2) major contractors-Bechtel/Technip Joint Venture.

Mining Engineer from with 24 years experience in underground as well as opencast mines. I have exposure in Lead-Zinc, Chromate Mines, Bauxite Mines and Limestone Mines. Presently, working as functional head of Limestone Mines captive to Cement plant.

I am confident and Expert; I am having 14 years experience with FIDIC contracts Worked on projects of Infrastructure Projects, Highway Roads, Bridges, Underpasses, Mechanical, Electrical, Water Work, Strom Water, Sub base Drainage, and Irrigation system, Construction of soft and hard Landscaping

Over 9+ years of experience in Portfolio management, Start stream TLM, Accounts, Operations & system automation.

Structural design of Post Tensioned Concrete Bridge, RCC High Rise Building, Tunnel, Highway Interchange Structure. Familiar with AASHTO LRFD, BS, ACI. Skilled in finite element softwares (MidasCIVIL, SAP, STAADPro, SAM-LEAP5 and AutoCAD). Specification, Report, AIP writing.

An accomplished and result-driven Management Executive with multi-faceted marketing experience. Exceptional communicator with demonstrated success interacting with people at all levels.

Free! Dear Sir untill now I have more than 9 years experience in construction, conversion & repair of the Supply Vessels, ULCC tankers, Tug Boats & Jack Up Drilling Rigs. 6 years experience as Project Engineer. Currently I work at the position of the Project Coordinator in ship repair.

Lead Process Engineer for Oil& gas Offshore/Onshore projects for Conceptual, Basic /FEED and Detail Engineering, Optimization and De-bottlenecking

I have a total of 13 years of experience working as an Engineer in the Petroleum Industry. For the last 10 years I have been working as a Process Engineer handling all aspects from Conceptual Engineering through to the Detailed Engineering Phase. I am seeking work as a Senior Process Engineer.

Involved in commissioning and pre-commissioning activities.

To secure a long/short-term contract, or permanent position. In Construction, Maintenance, Commissioning etc. My current position is as an Electrical/Instrument Engineer (as to the above position I am negotiable).

Fourteen years of combined experience in petroleum engineering and G&G (U.S. & international.) Experience includes integrated 3D reservoir modeling, numerical simulation, reserves assessment, field development, and reservoir studies.

Three years diploma in Civil Engineering (Technical Education Board of Punjab Pakistan)

„Ï A thorough understanding of risk engineering and Health Safety and Environmental (HSE) management systems in petrochemical, chemical, oil & gas industries, gained in a consulting environment. „Ï Consulting experience related to Process Safety Management & Fire Audit, Dust Explosion

Health, Safety and Environment Specialist/Instructor with National (CIED-PDVSA) and International (North Sea) Certification. HSE and H2S Instructor. 20 years experience in Drilling, Production and Crude Oil Transportation in Safety related areas with National and International Operators and Contract

HVAC PROJECT MANAGER

Professional Oil and Gas Geologist (Masters Level) with 10+ years global Wellsite and Operation Geologist experience. Experienced in pre-planning, supervising and post-well wrap-ups of multi-well/multi-rig programs.

Chemical Engineer, P.E. Petrochemical Design Background Experience

ISO Compliance, 6 Sigma, Asset Mgmt, Vendor Mgmt, Catering, Transport, HK, Costing & Budgeting, HR, Employee welfare, FBT, Guest house mgmt, PF, ESIC, Medical, Fire drill, Security, Solving Employee feedbacks, Auditing, Billing.

I am a proficient project Manager in GIS with ESRI and ERDAS technologies

 11.0 years exp. normal Operations in a petrochemical & Gas plants mainly in operation of centrifugal compressors (cooper, kobelco & Elliott),reciprocating compressors ( IR ,SULZUR & Burckhardt ) ,all type of pumps (mainl

13 years in quantity surveying

18+ years automotive mechanics,11+years powder metal industry blending heatreat operations etc.

Rotating equipment / mechanical maintenance technician / Commissioning technician

Experienced, results oriented, safety minded manager

Oil & gas consultant with 29 years of experience and supervision on land, platform, jack-up and semi-submersible rigs. Proactive leader with strong communication skills, both verbal and written. Effective problem solver and decision-maker.

I have been working as an exploration geologist for 20+ years, field work to project management, Porphyry, Magmatic and Gold deposits in Canada

Structural Designer

To Secure a position with an established organization, to utilize my knowledge and experience in the field of Heavy Duty Equipment.

diploma in mech.eng, NVQ-level -3

Experience Drilling Supervisor, Land & Offshore

Dependable, motivated and organized hard worker who learns new procedures quickly, and meet schedules

I have a comprehensive understanding of a wide and varied range of vehicles, including HGV, PSV, Heavy Plant and Drilling Machinery. I am keen to use these multiple skills in a post which will prove challenging. In addition to my mechanical capabilities, I also have a good working knowledge of hydra

Career Maintenance Manager Mining

Rig Manager / Mechanical Engineer

Twenty five years in the Oil and Gas industry all of which was in the discipline of Project Services and Controls, providing leadership in Estimating, Cost Control, Planning, Scheduling, Contract Administration services. In-depth exposure in Heavy Oil, Natural Gas, Petro-Chemical, Compressor Package

Senior construction manager

Electrical estimator in industrial and commercial construction. Proficient in WinEst and Excel.

Diamond Drill Operator, surface drilling with the use of various types of machinery

Oil & Gas Landman

23 Years hands on construction/on site experience.MDP Project Management, Employed by EPCM company for 14 years prior to retrenchment, then focussed my attention on positions abroad.

Results-driven project and program management professional with first-rate skills in directing full cycles for complex, multi-site programs and initiatives. Proven ability to deliver substantial revenue, productivity, and quality improvements through well-managed, on-time projects.Particulary strong

28 years experience in ug/ hard rock and coal. Hard Rock: Alimak, Drift (rubber and rail), all types of stoping methods, and equipment operator of 1,1/4yd to 9yd loaders all brands, over shot rail muckers from 12b to 25 , jumbo drills single and double boom. Coal: Fletcher bolter and long wall

30 plus years experience with heavy equipment both as an operator and supervisor.

Procurement & Contracts Expertise

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 [ 38 ] 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out