Resume - 20 Years in Land seismics as field Geophysicist, assistant crew manager and Inst...

Misco Jobs

Resume #84283

CONTACT INFORMATION:
View contact information...

Age: 40
Nationality: South African
Languages: English and Afrikaans
Health: Very Good
Education: Matric with university exemption

Work experience:
Geoseis (Joint venture between Geco and Genmin in South Africa)
1989 to 1992, Worked as a data processor in the processing centre
1993 to 1997, Worked on crew as Field Geophysicist
Western Geophysical
1998 to 2000, Worked on crew as Senior Field Geophysicist
WesternGeco
2001 to 2002, Worked on crew as Senior Field Geophysicist
2003, Worked as START school instructor in Jebel Ali and Oslo
2004 to 2006, Worked on crew as Chief Field Geophysicist
2006 to 2008, Worked as Assistant Party Manager
2008 to date, Working as Land Geophysics Instructor, Abu Dhabi
Countries Worked in:
South Africa, 1989 to 1994
Botswana, 1994
Mozambique, 1995 and 1998
Egypt, 1998 and 2005 to 2008
Algeria, 1999
Oman, 1999
UAE, 2000, 2003 to 2004 and 2008 to 2009
Saudi Arabia, 2000 to 2001
Yemen, 2001
Chad, 2001 to 2002
Libya 2005
Terrain types worked in:
South Africa, Urban, bush land and savannah
Botswana, Savannah
Mozambique, Tropical
Egypt, Desert, subkha, delta and transition zone
Algeria, Very high sand dunes
Oman, Flat gravel plains
UAE, Big sand dunes
Saudi Arabia, desert and subkha
Yemen, Big sand dunes
Chad, Bush land
Libya, Flat plains and subkha
Recording Systems:
Aram 24
IO II
IO Image
Sercel 388
Sercel 408
WesternGeco Q Land system
Ancillary Systems:
Pelton ShotPro
Abem Terraloc seismograph
Oyo seismograph
Software used:
OMEGA 1.83 processing software
OMEGA 2.1 processing software
SPECS project design and management software
Imanage project design and management software
Testify source and instrument testing software
Pelton vibrator QC software.
ViewQC 32 source analysis software
Source types:
Vibroseis
Explosives
Gun Boat
Types of projects worked on and responsibilities:
Almost all of the work done in South Africa, Botswana and Mozambique was 2D work while all of the contracts I have worked on in Northern Africa and the Middle East have been 3D designs except for Chad which was 2D work.
While working in the processing center in South Africa, I was fully involved with processing and had no input at all in the acquisition phase.
As a field geophysicist, my main task was to ensure the integrity of the data and monitor the source effort performance. In the later years as senior and chief geophysicist, there was more emphasis on the design side and also how to best meet the client's objectives when faced with obstructions like oil field facilities, rivers, urban developments and the like.
I was not involved with the initial design from a bidding point of view, but once the contract has been awarded, then taking the pre-plot and converting it into a working model with offsets and infills to meet coverage and offset criteria was part of my responsibility.
I was also involved with processing the data up to field cube on all 3D projects. In Chad,
Yemen and Oman, the level of processing was increased to final migrated sections.
Two of the contracts undertaken during my time as Assistant Party Manager were dual source contracts. One was a small transition zone job on the Sinai Peninsular using vibroseis and gunboat while the second one was a flush drilling explosive and vibroseis job in the Fayoum Delta of Egypt.
As an Instructor in Abu Dhabi I was tasked with training field Geophysicists in three levels. (Basic, Intermediate and Advanced)
The basic training was aimed at Junior Geophysicists and focuses on the daily quality control tasks including source QC, instrument testing, creation of final SPS and other similar tasks. The Intermediate training focused on field level data processing while the
Advanced training covered survey design and project management.
Miscellaneous:
I have a full understanding of the following source techniques.
Slip Sweep
Maximum Displacement sweep
Independent Simultaneous Source
QHSE:
I have the full suite of QHSE certifications (53 QHSE training certifications) as per the Schlumberger guideline

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2551 to 2600 of 15336)

Go to Search Parameters...

Brief Description

Sound knowledge of all aspects of Oil and Gas Field Process Engineering including Process Simulation, Pipeline Simulation, Preparing PFDs and P&IDs, Vessel Sizing and Specifications, Pump Hydraulics, Line Sizing, PSV Sizing and Flare Header Sizing, Depressurization and Blow down Calculation.

Professional with Ten years experience which includes Document Controlling, Technical writing , Quality Control/Inspection, Contracts documents, Drafting and Development using AutoCAD, Adobe Acrobat, Ms office, Photoshop.

I am having 10 years experience in Oil & gas industry (Offshore & Onshore) in the field of Inspection, QA/QC & NDT. Certified CSWIP 3.2, API 570 & ASNT Level II-RT, UT, MT & PT

I have over 15yrs well testing experience

Areas of Expertise: Design of offshore structures performing Global and Local analysis of Floating Production Systems, Jack up Platforms, Semi Submersible Platforms & Jackets,

QA/QC-INSPECTOR/ENGINEER- E&I

9+ years of work experience in Content management & Data Cataloguing

With a total of 20 years experience in various welding jobs from an oil gas, refinery & pipeline fabrication, platform, jet & fuel tanks, etc. With experience in pipe welding, pipe fitting fabrication, arc (SMAW) welding, gas welding, TIG, and FCAW welding. Familiar and actual practitioner of Weldi

Presently working on board a Jack-up rig in Qatar (Noble Rig) since October, 2007 as SAFETY TRAINING SUPERVISOR (STS). 11 months worked on board same Jack-up rig in Qatar Offshore (Noble Rig) as Radio Operator / Trainee Safety Officer.Passed with Credit, NEBOSH INTERNATIONAL GENERALC

Mechanical Engineer with 10 years of professional experience mostly in ESP and HPS designed worked for Schlumberger REDA and Woodgroup ESP. in artificial lift.

Piping Superintendent/Supervisor/Field engineer (PMT preference) Civil Engineering Diploma

Groupement Berkine (Sonatrach-Anadarko Corporation) currently base in Hassi Messaoud, Algeria

Working as a field operator in NGL Fractionation Unit , Gas treating unit by MDEA, regeneration of amine and SRU Claus Process Unit for precommissioning, commissioning start up and operation. Operating knowledge of pressure and atmospheric distillation, furnaces for sulphur production, amine

Structural inspector, Diploma in civil engineer

Free! An accomplished engineer with both project management and engineering management experience. Skilled in team management, systems development, construction planning, material procurement and engineering design. With 10 years of solid experience in the offshore oil and gas and shipbuilding industries.

Field Engineer in Middle East

Engineer having 10 years of experience in Foundation,Erection,Stringing from 110 kv to 400 kv lines and also having exp in OPGW overhead installation

I am a Petroleum Engineer of 14 years of oil and gas experience I have broad based skill that spread into financial and management and Reservoir modeling,seismic interpretation,seismic inversion ,great marketing skill.I have created a niche for myself in directional surveying in Nigeria.

Project Engineer / Construction, Commissioning, Completions, Start Up Manager

Condition monitoring Engineer with 10 years experience in oil and gas industry(Vibraton Analysis,Thermography)

Oil & Gas Offshore Architect: Living Quarters / FPSO Accommodation Design

Groundwater flow and solute transport modelling

An Inspection / Static Equipment Integrity Engineer with 14 years experience in oil and gas industry.

Motivated drilling/completion engineer, with considerable hands-on experience and excellent credentials, seeks opportunity to perform at peak potential for an aggressive company. Has achieved a solid reputation for managing challenging technical operations efficiently and economically.

Over 22 years in drilling field high pressure and temperature oil and gas wells.

Started mining at the age of 21,Have worked Successfully in 11 differant mines in Texas

20 Years in Land seismics as field Geophysicist, assistant crew manager and Instructor

A motivated, team player possessing outstanding problem solving skills related to internal/external offshore operations, along with excellent communication and computer skills. Over 20 years of hands on engineering and operations experience in offshore drilling, subsea control systems, installation

14 yrs experience in general welding and fabrication. I have been passed the TESDA (Technical Education And Skill Development Authority) National Competency Test II of 6G SMAW,6G GMAW, and 6G GTAW. Competent of high pressured pipe welding and blueprint interpretation

Fire fighter with 20 years experience. Health and safety experience with NEBOSH qualifications. Experience in industrial fire fighting and developing training programmes for specialist rescue teams.

Security Management Specialist

I have worked in th Alberta and Saskatchewan oilfield since 1983 doing a variety of work. From labour jobs to shop forman to managment.

I am a highly competent person, trained and experienced in all facets of production management and leadership. I work effectively with people seeking to utilize their collective and individual strengths and abilities, taking hands on role as required.

Warehouse Operation / High School

I am presently working VOLTAGE ENGINEERS LTD AT DOHA QATAR) as plant engineers / Automobiles maintenance engineers .managing a of workshop Transports in charge ( Company- Oil , Gas / power, infrastructure/ Energy/ Constriction. automobiles )

Management with technical (mechanical engineering) skill, with strong analytical skill for sales and operation.

8 Years Experience in NDT field. Performing NDT Inspection on Vessels, Columns, Cross Country Pipe Lines and Oil Field, Offshore Plat form, Petroleum Refineries, Fertilizers, Tanks and Fabrication Yards.

Safety manager/coordinator

I am a Mechanical engineer with over 30 years working with steel, and anything technical.Spent the last two years contracting after spending ten years with a local company as their Technical manager.

APPLY IN TECHNICIAN TURBOMACHINERY AND PLANT OPERATORS KNOWLEDGE

Survey Party Chief / Technician with experience with all phases of boundary,constructionand topographic surveys

Piping design for PetroChemical,Refinery,Offshore,Marine,Mining,Pipeline,Power, Pulp and Paper fields. 15 years PDS experience. Field and fabrication shop experience. Capable of orienting towers and platforms. I pride myself with working with other disciplines. Willing to travel.

Senior/Principal Piping Designer/Checker

Structural Design, Stress Analysis, FE Analysis (Nastran / Patran, ANSYS 11.0) and Structural Calculations in MathCAD (Ref: Roark’s, API, ASME B31.3 and DNV)

Electrical Engineering diploma holder with more than 14 years experience in electrical oil and gas onshore construction field.

rig manager / toolpusher

Horz. Under balance Drilling is my best value.

24 years experienced Sr. Piping designer, well skilled in PDS, PDMS and microstation

Summary of Qualifications: Honest, hardworking and responsible. Excellent work history. Strong organizational skills, solid time management skills, good communicator, effective problem-solver, achieved production goals in a safe and cost effective manner, team player, proven ability to train

Planner/Scheduler experience in PetroChem maintenance, turnarounds, capital projects and construction.

First Prev 51 [ 52 ] 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out