Resume - I have done D.A.E. (Diploma of Associate Engineer). My experience is more then 4...

Misco Jobs

Resume #84544

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVE:

To contribute towards the growth & development of an organization that offers learning opportunities and professional environment.

ACADEMIC QUALIFICATION:

* 3 years Diploma of Associate Engineer Electrical Technology from P.B.T.E Lahore 2001 to 2004.
* Matriculation with science from B.I.S.E. Bahawalpur in 2000.

PRESENT RESPONSIBILITIES:

I've been doing my present job as an Electrical Technician in Fatima Fertilizer company ltd since 25th February 2008.

Two years Apprenticeship training from Engro Chemical Pakistan ltd from 14th Nov 2005 to 13th Nov 2007.

One year working as Electrical Technician in Engro Chemical Pakistan from Dec 01, 2004 To Nov 02, 2005.

* Experience In maintenance and troubleshooting of electrical equipments.
* Good knowledge of hazards & area classification and required safety practices associated with urea fertilizer complex.
* Well-Versed with use of Maximo based CMMS for routine PM&Turnaround maintenance & inventory management.
* Ability To Adapt & Adjust In New Systems.

PROFESSIONAL TRAINING:

* Electrical safety fundamental by DuPont PSRM (Process Safety & Risk Management) + PSM (Personnel Safety Management).
* Training of 6-sigma quality management system.
* P.P.E (personnel protective equipment).
* Maximo based CMMS.
* Electrical 'Area classification'.
* Work permit procedure.
* First aid training.
* Plant safety.
KEY ACHIEVEMENTS:

* Installation fire alarm systems based on Human friendly Inergen™ gas. Make: Thorn, UK.
* Refurbishment of old panels of motor control center and power center.
* Termination of M.V cable.

WORK & EXPERIENCE:

Electrical maintenance, troubleshooting & Up-keeping of Ammonia, Urea & Utility plants. To suggest and implement modifications for the improvement of plant operation. Knowledgeable about Maximo based CMMS.

EXPERIENCE:
(More Then 04 years)

MV and LV SWITCH GEAR:

Preventive maintenance and inspection of C.Bs. complete overhauling, maintenance and testing rack in rack out procedures of circuit breakers.

* 6.6KV Air Circuit Breaker (GE & Siemens)
* Vacuum contactors up to 450A, 6.3kv.
* 6.6KV / 11KV Vacuum circuit breaker (Alstom & Siemens)
* 440V LV Switchgears with secondary selective system ACBs (Siemens /Alstom)
* 440V LV switchgears with ACBs (Siemens / Alstom).

Troubleshooting in substation at control circuit of 6.6 kv out going motor feeder cubicles at distribution panel with a firm hold over drawings and standards related to electrical network.
.
TRANSFORMERS UP TO 3500 KVA: ( ABB,SIEMENS)

Preventive maintenance, oil testing, oil treatment, installation, power cable termination, meggering, and overhauling including oil sampling for dielectric test and silica jell replacement, connection tightening, bushing seals and Buchhulz relay level glass replacement of 6.6KV / 440V & 6.6 / 11KV distribution transformers (Siemens / AEG)

LV MOTORS UP TO 250 KW:

Termination & connection troubleshooting, greasing, winding and complete overhauling in case of excessive vibration temperature, and abnormal sound of motors up to 250 kw made by ABB, GE, Siemens, Westinghouse.

VARIABLE FREQUENCY DRIVERS:

Familiarization with complete operation and trouble shooting of VFD`s of different companies such as ABB, MITSUBISHI, from fractional KW to 150KW.

STORAGE BATTERIES:

Voltage analysis during charging and discharging, electrolyte sampling for specific gravity and level make up of lead acid, and nickel cadmium battery banks up to 240Ah made by SAFT.

 FIRE ALARM SYSTEMS:
Trouble shooting and maintenance of multi zone fire alarm systems with automatic fire suppression system (based on human friendly Inergen™ gas), make: Thorn, UK

UPS and DCP:
Familiarization with operation of 380V, 80 kva UPS.Familiarization of operation and working of DCP (Direct current panel) providing 110 volts DC for control of whole switchgear and protection system.

ROUTINE JOBS DURING TRAINING:

Installation of simple and explosion proof lighting schemes as per site requirement. Troubleshooting of tripping faults of lighting and portable power appliances in field. Carbon brushes replacement of 18.5MW generator.

CABLES JOBS:
* Testing, gladding, connections and lying of cables up to 400 mm according to cable schedule.
* Proper termination, jointing & punching of M.V & L.V Cable.
Working experience on following equipments:

* 7.2 KV / 800A current limiting reactors.
Alstom: Micom motor & feeder management Relays P241, P122.
* Siemens Simatic S7 PLC based automatic bagged Urea loading & palletizing system, AUTOPAC. (Beumer Germany).
* Troubleshooting of electrical interlocking of conveyer belts.
* Emergency power network with "DG Sets" & "AMF" System.
* Preventive maintenance of diesel generators, battery chargers (SAFT) & batteries (Lead Acid & Ni Cd)
* Cathodic protection system (Impressed current)
* Overhead crane 20 ton & Movs.

USE OF MEASURING AND TEST EQUIPMENT:
Uses of measuring and test equipment such as megger up to 5kv, earth resistance tester, digital multimeter, Primary current Injector, oil tester Use of oil treatment machine, phase sequence meter, motor rotation tester etc.

COMPUTER SKILL:
Ms dos, Ms Word, Ms excel, Internet and familiar with AutoCAD.

PERSONAL DATA:
Date of Birth 06 - 12 - 1983
Martial Status Single
Nationality Pakistani.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9101 to 9150 of 15512)

Go to Search Parameters...

Brief Description

Diamond Exploration and running diamond exploration laboratories,

Certified Facility Manager

12 Years on offshore industry working with subsea installation of equipments (manifolds, suction piles, PLETS etc) and flexible lines in shallow and ultra-deepwater; subsea connections; pull-ins; remote and dive assisted interventions; inspections, maintenance and subsea repairs; stand alone equip

Recognised qualified person (RQP) under rule 22C of Mineral Concession Rules, 1960, for preparation of Mining Plan and Scheme of Mining as required to be prepared under rule 22B of Mineral Concession Rules, 1960 & Mineral Conservation & Development Rules, 1988. (INDIA)

Field oriented structural geologist; Highly adept at working both alone and as part of a team; Strong analytical thinking; Technical writing and speaking; Multi-lingual; Eligible for Professional Registration; Willing to travel

I believe that I have necessary background and experience to work on wildlife and protected area management, as well as Environmental Impact Assesment projects.

Good technical skills, Like to work with computers, Internet, Driving license category B.

Project Management, Inventory Control, Contract Compliance, Accounting, Admin

Maintenance Manager in the Exploration Department of a Copper / Cobalt mine in the Democratic Republic of the Congo.

6+ Years of experience in all aspects of Technical and Development my skills and abilities in the any Industry that offers Professional growth while being resourceful, innovative and flexible.

I am currently seeking a challenging position within the architecture and engineering fields as an assistant project manager or drafter. I have gained a wealth of experience with my current employer in the design of telecommunication sites as well as a fundamental knowledge of civil site design.

expirience in hydraulic fluid connectors

20 years experience in accounts & administration with reputed organisations like Trading, FMCG, Manufacturing, Oil Industry

PhD, CFD, Fortran, Matlab, C++, Fluent, Gambit, Tecplot, AutoCAD, ArcGIS

Automotive Service Technician (Mechanic

WITH profil of graduted technician in electromecanichs and an hight experience in petrochimical industry

Chem Analyst - Laboratory Technician

Experienced plant operator in gold and diamond processing with knowledge of crushing,screening, milling, flotation,SCADA system and Metallurgical Accounting system

I have done D.A.E. (Diploma of Associate Engineer). My experience is more then 4 years at fertilizer plant. I am currently working in Fatima Fertilizer Company. I have gained hand on experience of Maintenance, Troubleshooting and Installation of the plant. I am fully aware of the

using AUTOCAD

Working as a welding engineer from last 2 years.having background of metallurgy.

Working as Petroleum Engineer since 17 years. Engineer, Supervisor and Manager roles in drilling, wellcompletion, production and workover operations in oil and gas E& P .

Bachelor Degree in commerce

Experienced oil and gas operations manager with proven record of production optimization, safety and personnel development. Experience in pipelines, gathering, compression, NGL, amine, automation, shale as well as conventional oil and gas operations including drilling, completions and workovers.

I am presently working as Manager - Operations (Process) with IndianOil Petronas for their 6.0 lakh TPA LPG Import/Export Terminal at Haldia, India. I have over 20 years of experience in the construction, commissioning & operations of LPG Filling Plants & Cryogenic LPG Terminals.

I am presently working as Manager (Mechanical) with Engineers India Limited an ISO 9001 CONSULTANCY ENTERPRISE of Govenment of India & supervising on behalf of owner all piping and equipments installations in PTA - project of Indian Oil Corporation at Panipat Haryana India.

CA licensed geologist (CEG&RG). More than 24 years of professional experience in engineering geology and environmental consulting in CA & HI, including 16 years as supervisor/owner. Currently self-employed with own environmental consulting firm in HI since 1992. Relocating to AZ (Tucson or Phoenix)

I am a Mining engineer and I got Manager's certificate.I got four years experience with Continuous Miner technology and also I got quite good knowledge of Strata Monitoring instruments.I also got very good Computor skill.

currently postion: site engineer, with Orica PNG ltd, graduated with a Diploma form the University of Technology Lae, PNG.

DP Technician/ ETO/ DP Operator

PDS, Piping Designer, Smart Plant Review, AutoCadd, PDMS

Type 65 wpm, Microsoft Excel, Microsoft Word, QuickBooks Enterprise, PowerPoint, Delorme XMap, excellent phone skills, highly organized work habits, accounts receivables, accounts payables, reconciliations, volume discrepancies, allocations, etc.

I study physics electronics teschnology and i measured 2:1. I am good in computer assembly and installation, microsoft ms, excel, powerpoint

NCCER certified construction site safety technician; 5-8 yrs experience; bilingual

Strong communication skills, strong HSE knwoledge

A computer literate and good skill in practical weldind

Ability to work in team with high collaboration Capable of achieving personal objectives as demonstrated by successful completion of my degree Excellent analytical and problem-solving skills Extensive experience with public conference and presentation. Good knowledge in radiation protection

- Exceptional Learning Ability - Excellent Communication skills - Eclectic Reading - Striking ability to absorb information - Good Interpersonal relations - Ability to perform under pressure - Ability to work as part of a team - Ability to meet deadlines - Self – motivated - Goal - Driven - R

Recent mechanical engineering graduate searching for employment as an EIT.

Post graduation in tool desiogn esp. in the field of sheel metal working ie. press tools, plastic moulding, have tge good knowledge of catia-v5, pro-e, autocad, ansys software

Mechnical engineer

BE Civil

Young and Dynamic candidate seeking career within Oil and Gas or Petrochemical Company with relevance to Chemical Engineering Background. Excellent common-sense and decision making abilities. Self motivated, hardworking individual also strong team spirit and willing to travel.

Entry-level candidate

COMPUTER LITERATE, EXCELLENT DECISION MAKING SKILL, FINAL YEAR BSc OSHE

Time served Mechanical fitter with 20+years experience on a variety of petro-chem processes.DCS control room operator. PPO2 in processv technology. Nvq3 in mechanical fitting.

Have knowledge in Protocols like MODBUS, 101, 103, 104, RP570 and in micro scada,Have worked in debugging and testing of protocol converters and interface converters. Have worked with fiber optic converters, RS232 and RS485 communication cables,Have also worked in PMS (Power management system)

Experienced in autocad ,microstation and manual drafting. 32 years in civil and structural design

Instrumentation technician with 3 years working experience in Wiring installations, Installation/hooking - up of instruments such as Transmitters, Pressure gauge, Thermocouples, valve controller I/P etc.. , Install additional Lighting. Modifying Control Panels, PLC Programming (Pr

Mining Shaft Supervisor, Equipment Operator, Maintenance Supervisor

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 [ 183 ] 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out