Resume - PhD Petroleum Engineer (Production Technologist)

Misco Jobs

Resume #84688

CONTACT INFORMATION:
View contact information...

EDUCATION
PhD in Petroleum Engineering.
June 2003- Dec 2007
Robert Gordon University, Aberdeen, UK.
Description:
The aim of this research was to investigate the fluid flow in different porous media (i.e. membranes) and the effect pore size and its distribution on relative permeability. The reaction, separation and purification of different gases from mixture streams were also studied as well as the gas transport mechanisms through these porous media. This type of separation is applicable to different applications such as CO2 separation in enhanced oil recovery and dehydrogenation of saturated hydrocarbon. Modelling and simulation for gases flow at different conditions were conducted in this research using Polymath5.1 software.

Master of Technology in Mechanical and Offshore Engineering
September 1995-October 1998
Robert Gordon University, Aberdeen, UK.
Thesis Title: Application of the Flow Unit Technique for Carbonate Reservoir characterisation.
Description: Experimental investigations were conducted using sufficient core analysis data including measurement of porosity, permeability and capillary pressure from 197 carbonate core plugs to permit identification of zones (flow units) with similar fluid flow characteristics in order to characterise the North East Sirte basin carbonate reservoirs

Bachelor of Technology in Petroleum Engineering
September 1986-July 1991
Al-Fateh University, Tripoli, Libya
Thesis Title: Experimental Investigation of Capillary pressure-relative permeability correlation for Sirte Field, Libya.
Description: Experimental studies into the comparison between direct laboratory measurements for relative permeability data and predicting relative permeability data from capillary pressure curves.

WORK EXPERIENCE
2008 - Now
Petroleum Engineer, Petroleum Experts Ltd, Edinburgh.
The duties were, provide technical advice and support to customers on all aspects of software products, optimum usage and application (MBAL, PROSPER, GAP and PVTP).
Train clients' personnel worldwide. Conduct engineering data processing and analysis, well and field modelling. Build and enhance customer relationships. Develop new business with existing and potential clients.

2004-2006
Reservoir Engineering Course Instructor at Geo-services International Training and Assessment Centre, Dundee, UK.
Description: The fundamental of reservoir engineering course covered many topics which included a number of topics such as reservoir features, phase behaviour of petroleum fluids, PVT properties of crude oil, reservoir drive mechanisms, and volumetric estimation of reserves, material balance methods, and fundamentals of reservoir fluid flow, dynamics of reservoir fluid flow and evaluation of well performance.

1999-2003
Production Engineer, Agip Oil Company, Tripoli, Libya.
Planning Production Logging (PLT) with the team and establishing logging programs.
Production log interpretation.
Well test planning and Interpretation (Falloff test, transient test analysis…etc).
Nodal analysis, using Prosper.

1992-1995
Junior Reservoir Engineer, Waha Oil Company, Tripoli, Libya.
Part of subsurface team, the duties involved: well testing, such as pressure build-up, drawdown and injectivity tests, as well as production logging.
Worked with production team trouble shooting well problems, planning and interpreting well test and company witness of workover programmes involved in production logging.
Decline curve analysis and material balance.
Oil in place and reserves calculations, etc.

Personal Skills
* Highly motivated person with a focus on innovation and creativity and the ability to bridge gaps between disciplines.
* Initiate and conduct research in petroleum reservoir engineering both individually and/or along with a team.
* Team player, flexible, and work with a variety of professionals from various backgrounds and different levels of expertise.
* Ability to generate new projects and contribute substantially to existing efforts.
* Ability to communicate and steer research in various international R&D organization

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1801 to 1850 of 15341)

Go to Search Parameters...

Brief Description

Senior Rotating Engineer

A Process Engineer with a Masters Degree in Chemical Engineering from the University of Waterloo, ON, Canada and 10+ years experience in natural gas and polymer processing industries. Specialize in process optimization, manufacturing and troubleshooting.

I have over 16 years of working experience as a QC Inspector in petroleum and petrochemical construction Industry. I have knowledge and experience as Q/C inspector in various inspection activity like raw material inspection, welding procedure / welder performance qualification,various methods of NDT

HSE Coordinator / Offshore Safety Officer

I've developed leadership qualities and a proactive attitude, all of these combined with my experience in Maintenance and Well Production Operations, supported with software and techniques on Equipment condition analysis, laser alignment, corrosion testing, boroscopic inspection and vibration analys

Thirteen years of problem solving, decision making, upward career progression and increasing responsibility. Extensive hands-on experience administering, planning and managing operations in the following functional areas: facilities management, project supervision, procurement, staff development, bu

Mechanical engineer in Oil&Gas Feild 18 yrs Experience in Installation, maintenance, QC in Static, Rotating equipments.

Able to learn Work Process and new software with ease. Experienced in the refinery of Blueprints, Isometrics, and P&ID¡¦s, Hand Skecthes. Experienced in structural steel supports and familiar in estimating material take-offs. Trouble shooting installation of pipe and assist Engineers in the field.

PhD Petroleum Engineer (Production Technologist)

I am a qualified Mechanical Design Draughtsman and a Fitter Turner Machinist. I have also completed the Management Development Programme through The University of Stellenbosch.

Project Manager, PMP, MBA Finance, B.E

I have 15 years Lab experience such as 6 years of LNG plants, 7 years of Refineries and 3 years of Aromatic and PTA plant Labs experience with 5 new labs commissioned experience. I have a good knowledge regarding the dosing of corrosion inhibitor at wells side. I can conduct Oil & Gas analysis.

Interested in moving back to Texas as a Quality Manager

!$ years rich experience in coal mining both in underground and opencast, Experience in greenfield and brown field project

I have a strong ability to communicate and work effectively with co-workers and management. I am Self motivated, detail and goal oriented person. I am experienced in working with little to no supervision. I posses effective skills in communicating orally and in writing

My name is Bruce Hutcheson and I recently worked as an Assistant Plant Manager at Luck Stone Corporation, located in the Northern Virginia area. As a dedicated manager for over 20 years, I am inquiring about a new opportunity to expand my career while inproving your client’s bottom line.

Talent Management, Talent Acquisition, Talent Development, Change Management and Lean

M tech stctural engineer in Civil department, i am having expeerience in oil and gas as sr engineer in civil and structural department.

I am familiar with almost all of Pennsylvania. I currently have over 30,000 acres available to me for lease, most of it has been identified as being in the marcellas shale regions. this acreage also holds shallow oil and gas reserves. A substantial amount has current production which is available

Diploma in High voltage switching-Maintenance Planner-Electrical maintenance

Senior Piping Designer

Experienced Project Manager and proficient with AutoCAD, MS Word, MS Project, MS Excel, MS Powerpoint. Familiar and follow industry standards of the FDA, USDA, PHARMACEUTICAL and OSHA requirements. Experienced with real-time PMP methods.

Heavy equipment operator

Mechanical Fitter (Foreman) Maintenance Department. - 25 years experience

TURRET PRESS AMADA EXPERT,ARIES,COMA,VELLA,PEGA,VIPROS,2510

39 years experience running both surface & mineral titles & preparing reports

Assistant Driller - Main activities and responsibilities on the rig DRILLMEC HH - 220

Material Handling Operation (Coal Handling System; Ash Handling System; Limestone System; Gypsum Area; Waste Handling Area; Fuel Oil System and Heavy Equipment), hard worker with 14 years hand on experiences in Power Plan Operation, commissioning, trouble shooting and root cause analysis.

I have been responsible for all aspects of mineral and royalty acquisitions that there are. I am also an experienced permit agent and familiar with most aspects of two and three-d seismic permitting. Negotiated damage settlements.

Construction management/estimating/field supervision

I am currently employed within local goverment as a Roads Inspector. I have been employed in this position for nearly 5 years. I worked my way up from a maintenance road worker and have many years of skills and expertise in this field.

Versed in plant operations and turnaround codination. Seeking short term contract assignment.

Project Engineer & System engineer along with detail design experience and product development expertise gained from 20+ years working for NASA.

skilled tradesman. Mobile/Tower crane operator, Heavy duty equipment mechanic, Rigger, Inspector, Apprentice Millwright

An extensive career having an experienced blend of commercial and construction credentials in the engineering/infrastructure field including civil and mechanical engineering works involving co-ordination of consultants, contractors & public utilities, managing deadlines and optimising costs

A professional with 24 years of multi-functional & multi-ethnic/culture experience in Technical and Project Management areas. Experienced in handling multi projects, excellent communication skills & man management capabilities, team building, business road mapping, problem solving abilities

I am a Mechanical Engineer with work experience basically in Oil & Gas and Refining Project Management, Gas Compression Plant Maintenance, and Process Safety Management. Currently I live in Venezuela and planning to relocate to the United States. I have dual citizenship and fluent in both languages.

25 years of professional experience in the Front-end and Detailed Design and Engineering, Projects Engineering, PMC, Factory & Site Acceptance Testing, Supervision of Installation, Testing and Commissioning of state-of-art DCS, SCADA, Safety Shutdown and F&G Systems and field instrumentation

TQM facilitator & instructor /Lead teams to resolve to improve process/ 4 yrs offshore Maintenance Supervisor /2yrs manager offshores field/ 4yrs CMSM coordinator/6 yrs contol management stocks

Masters degree management. 20+ years commercial/ heavy industrial construction. Carpenter based w/15 years management

Field Acquisition QC. Over 20 Years experience in Land Seismic. 3D Design by OMNI and MESA. Field processing of 2D/3D land seismic data (MicroMax,ProMax, VISTA, APEX) . Creating and verification of SPS files. Static correction.

Environmental Compliance Manager Results-driven, Certified Professional Geologist with extensive leadership, knowledge and experience in ensuring environmental compliance.

Working as In charge OIL/GAS LABORATORY TESTING OF LPG/C2C3/NAPHTHA/OIL ETC. PROCUREMENT/CALIBRATION/MAINTENANCE OF EQUIPMENTS

Worldwide experience in planning, managing, designing and implementing a wide range of water resources and water supply projects.

French Engineer with international and overseas experience Contract Management, General Management In the field of Water Treatment.

OBJECTIVE: Add value by leading people and projects, solving problems, bringing order from chaos, turning dysfunction into productivity, in a petroleum exploration or development geology management position.

Management consultant/ environmental scientist specializing in NEPA, RCRA, CWA, CAA, environmental assessments and fraud investigations.

Contracts Experience in Construction, Management and Administration (EPC), Materials Manager (PMC), Materials Control, Procurement & Expeditor; Fluent in English, conversational in French, Russian. Seeking to continue professional career effectively utilizing my skills and gained experience

More than(18) years in piping design & construction. Specialize in stress analysis of piping system using Caesar 11. Worked in oil refineries, onshore & offshore, gas plant & petrochemicals e.g. Saudi Aramco & Saudi Basic Petrochemicals ,Petromin Shell & Jeddah Oil Refinery.

Registered Mechanical engineer with heavy industrial, mining and USACE construction experience.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 [ 37 ] 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out