Resume - I am a young innovative technichian seeking a full-time position with your compa...

Misco Jobs

Resume #84759

CONTACT INFORMATION:
View contact information...

Objective
As an innovative and enthusiastic individual, I am seeking a full-time position with your company.

Education
Associate Degree of Applied Technology
Industrial Instrumentation (August 2005) Sowela Community College
Industrial Electricity (August 2005) Sowela Community College
Class I Waste Water Treatment (March 2009)
Class I Waste Water Collection (March 2009)
High School Diploma (May 2001) St. Louis High School
Work Experience

City Of Lake Charles Lake Charles, LA
Operations 09/28/08- present
* Treat waste water.
* Maintain blowers, pumps, motors, and other process equipment.
* Perform routine checks to make sure equipment is running properly.
* Draw sludge to be sent to land fills.
* Check and repair lamps, sleeves, and ballasts on the UV system.
* Collect data on pressure, flow, temperature, pH, and settleablity test.

Prime Controls New Orleans, LA
Instrumentation Tech 03/2008- 07/2008
* Automated diesel and electric motors for pump station.
* Set-up Allen-Bradley DCS for motors to be controlled at safe house.
* Ran conduit around engine skids and flexed up to instruments.
* Hooked up devices and calibrated them to be commissioned.
* Walked down systems to make punch list.
* Used various test equipment for loop testing and calibration.
* Verified wiring diagrams, loop drawings, and P&ID's in the panel.
* Set-up Allen-Bradley PLC racks and verified landings of wires.
* Ran fiber optic cables for hookup of Allen-Bradley HMI¡¦s

Sulphur Electric Westlake, LA
Instrumentation Tech 08/12/2007- 02/15/08

* Operates Hart 375 communicator, Fluke 787 meter, and TransCat pump.
* Troubleshoots on processing control loops.
* Calibrates transmitters, positioners, indicators, and other process equipment.
* Have knowledge of Siemens PLC's and ladder logic, as well as Honeywell DCS.
* Strokes valves for good feedback and set open and close times on valves.
* Verifies wires from the board to the I/O panel to junction box to the device.
* Lifts wires, checks fuses, check ohms wires, and terminates wires.

Deepwater Specialists, Inc (BP Thunder Horse, Gulf of Mexico)
New Orleans, LA
Instrumentation Tech 03/2006-06/2007
* Received permit on work training and JSEA.
* Operates Hart 375 communicator, Fluke 787 meter, and TransCat pump.
* Troubleshoots on processing control loops.
* Calibrates transmitters, positioners, indicators, and other process equipment.
* Have knowledge of Allen-Bradley PLC's and ladder logic, as well as Honeywell and Kongsberg DCS.
* Strokes valves for good feedback and set open and close times on valves.
* Verifies wires from the board to the I/O panel to junction box to the device.
* Lifts wires, checks fuses, check ohms wires, and terminates wires.
*
Market Basket Lake Charles, LA
Meat Cutter assistant /Deli salesperson 01/2004-08/2004
* Ran meat cutter in order to cut various meats, wrapped meats, and priced them.
* Purged, seasoned, and boiled crawfish.
* Operated a meat grinder in preparing sausage and boudin meats.
* Seasoned and cooked sausage and boudin meats
* Used a cylinder machine to make sausage and boudin.
* Operated a register where meats were wrapped, scaled, and priced.
* Thoroughly cleaned market area upon completion of duties.

Isle of Capri Casino Westlake, LA
Valet 01/2003-11/2003
* Greeted patrons by opening car doors as they arrived at the casino.
* Recorded patrons¡¦ identifying information on forms and took their car keys.
* Parked vehicles in valet parking garage.
* Secured patrons¡¦ keys after signing them in at the valet office.
* Retrieved patrons¡¦ vehicles upon request and return their keys.

Pumpelly Oil Bulk Plant Sulphur, LA
Laborer/Forklift Operator 06/2002-08/2002
* Operated forklift to move oil tanks to be sandblasted.
* Primed oil tanks with paint sprayer.
* Ran paint sprayer to paint oil tanks.
* Operated forklift to move painted oil tanks upon completion.
* Thoroughly cleaned paint sprayer upon completion of duties.
AmeriCorp Lake Charles, LA
Tutor 06/2001-08/2001
* Assisted fourth graders in passing remedial LEAP Test.
* Taught English grammar and helped to improve reading skills.
* Instructed students with solving simply multiplication problems.
* Recorded pupils¡¦ progress on daily log sheets.
* Chaperoned students on school field trips.
* Completed voluntary community services hours as part of the program.
* Received a certificate and scholarship toward college.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8501 to 8550 of 15497)

Go to Search Parameters...

Brief Description

To obtain a position in the offshore oil & gas drilling industry which best utilizes my extensive mechanical skills and background while providing for career advancement. Currently residing in Fort Collins, CO, and in process of relocating to the Houston, TX, metropolitan area.

9 yrs experience in process engineering for Refinery, Natural Gas, Petrochemicals areas, worked on FED,DD projects; de-bottlenecking studies & residual engineering work. techniques of hazard analysis & HAZOP studies. used process simulation software ChemCAD 3.0, HYSIS,PipeSim & Pipephase

Working on campus at Texas A&M University–Kingsville has provided me with a variety of skills and talents. I also have an extensive knowledge of a variety of computer applications. I am always interested and open to further training & I am willing to relocate.

QC Geophysicist for 2D Seismic Reflection data acquisition. Geophysicist for data acquisition processing & interpretation of Seismic Refraction. Resistivity data acquisition processing and interpretation for water investigation Familiar with computer packages

Registered Occupational Emergency Nurse . 30 Years experience in Industrial Mining and Oil Industry Nursing. At present working as an Oil Rig Medic Nurse In Angola. Also Trained as Diagnostic Radiographer and Gold medal, Instructor in First Aid, Resuscitation and Medevac.

I AM EXPERIENCED ELEVEN YEARS IN OIL AND GAS, SR.PRODUCTION OPERATOR ONSHORE AS WELL AS OFFSHORE IN MULTI NATIONAL COMPANIES. I AM LOOKING FOR A BETTER APPORTUNITY,PRIOR FOR ME JOBS POSTING 28/28.

Extensive experience in the sales and marketing of crude oil and finished products. Worked for 4 years for an energy trading company in the USA, Votex Investments, Inc. Educational background includes a MSc in International Business from the London School of Economics.

Included in body & contact information.

Please find herewith the enclosed resume of mine for the post of Mechanical engineer. As I have more than 10 years full experience in the field Heavy earth moving equipment.

With Fourteen Years Experience in the mining field both construction and development. Nine Years Supervisory Experience. Eleven Years drilling and blasting. BCOA Certified. I feel I would be an excellent asset to your company. Certified MSHA Trainer. EMT 1 Certified. Il supervisor papers.

hydraulic technician/fitter

I would like to take this opportunity to present my employment credentials for your consideration, and I would welcome the opportunity to introduce myself to you at your earliest convenience

Seeking a position where I can apply technical and management skills in a dynamic environment and continually face new challenges.

Metallurgical engineer seeking an extractive metallurgy or mineral processing position. Interested in areas where the main objectives are process improvements and quality control. Analytical and inquisitive with a Midwest work ethic.

32 years of international and domestic deep water, jack-up barge and land rigs,in drilling, completion and workover in field operations.

11 years experience in the construction industry Interested in international Opportunities

23 years of experience as a supervisor in drilling, completion and workovers on and offshore.

I am pursuing a position as a Civil Engineer involving design and/or project management. I am seeking to develop my Civil Engineering career and obtain a Professional Engineer license.

COMPUTER GEOLOGIST Databases, GIS & 3D Modelling Project & Quality Management

I am a female Geologist. I obtained my Msc from Oxford Brookes University, and am computer literate.

Petroleum Engineer with MBA in Finance (University of Houston). Willing to be relocated to Colombia (South America). Native Spanish Speaker.

• Management Experience and extensive knowledge of the Latin American business environment. • 5 Years Sales & Marketing Experience in South America for Mineral and Oil Exploration surveys for Aerodat Inc., (1995-97), Scintrex Ltd. (1998-99) and Fugro (2000).

I am looking for a job in the petroleum industry. I have a B.S. degree in petroleum engineering. I have over 11 years of experience and training related to petroleum engineering. Most of my experience was as a mudlogger. I am very interested in an office position relating to formation evaluation.

Objective to work as shore base support for drilling operations on land/offshore drillling units.

Looking for Field Engineering position.

My first 5 years of experience covers TURN KEY Project Management / Estimation / Execution-Supervision / Installation, Water Trials, Commissioning, Maintenance, Trouble Shooting, etc. & last 7 years in Piping Design & Eng.

Details of career brief version

13MONTHS - SAFETY 7 YEARS - SHAFT 5 YEARS - DRIFTS 6 MONTHS - STOPES

I have worked on all sizes of rigs since 1983 and have gained a lot of down-hole experience in directional, horizontal and under-balance wells.

Bachelor Degree in Metallurgical and Materials Engineer in Brazil. I have 2 years experience working with quality inspection in a maintenance Company for Oil/Gas Industry, also 4 years of experience in laboratory on materials testing and characterization.

25 years experience in Planning/Project/Detailed Engineering of Oil and Gas Plants, Petroleum Refineries and Petrochemical Plants

CFD (Computational Fluid Dynamics), Multiphase/Multi-component flows, Fluid Flows, FSI (Fluid Structure Interaction), ASI (Arbitrary Sliding Interfaces), Heat Transfer, Thermal engineering, Design/development, Combustion, Chemical/Reaction Kinetics and Chemical simulation, PhD, Mechanial Engineering

Total 6½ of years experience in the field of power plant and GOC in various projects. Preparation of GA and preliminary piping layout with Design principles, creation and review of P&ID’s, Review of vendor information, review of contracts with respect to system description, highly proficient using I

PROJECT SKILLS- A project on "Soil quality analysis of Santiniketan, West Bengal" Hands on experience about testing of Air pollution and soil analysis at TATA IRON SPONGE, BIRLA TYRES, and also in PHILLIPS CARBON-BLACK LTD.

Automation Engineer, I have worked in different company for electronic devices and actually in Oil and Gas field us an engineer automation for DCS and Safety syetems, for more details Plaise see my CV here.

Structural design engineer

CCNA, BSCI, Diploma in cyber law

To seek a challenging position of strategic importance, by making contributions to the organization, by best of my abilities and developing my own skills during interaction. My Motto in life is "Problems are opportunities and never accept defeat in life".

I have first aid & WHIMIS certificates, as well as CWB tickets in SMAW 1GF, 2GF and flux core 1GF.

B.Sc Computer Sc,MBCS,MCPRN,MBA(In View), Oracle Database Admin, Microsoft Office 2003 & 2007 Suite, Unix, User, System ad Application Support, Data-Center Administration

Favourite Subjects: Manufacturing processes and Strength of Materials, Ansys, Autu CAD, Basics of C

Entry level

lab chemist - Analysing naptha, fuel oil , lube oil , different water samples (all parameters )

Well Testing Mobile unit Supervisor

Metallurgy and Materials Engineering, Corrosion, Powder Metallurgy, Foundry Metal casting, Composite Materials.

Duties included design and drafting; instrument drawings and documentation such as instrument plans, installation details, creating databases and maintaining an instrument index, and numerous on-site surveys and field work for modification project.

Instrumentation Engg done the project in Hikal (Agro-Chemical company)

I am a young innovative technichian seeking a full-time position with your company.

Maintenace Electrical Foreman

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 [ 171 ] 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out