Resume - Well- organized innovative and result oriented Person. Flexible attitude, highly...

Misco Jobs

Resume #85389

CONTACT INFORMATION:
View contact information...

Preferred Area of Interest Fired Heater

Objective As aspiring team worker, hard working and dedicated professional who want to meet the challenges posed in the organization and to contribute towards the growth of the organization.

Qualification „Ï Graduation: B.E (Mechanical Engineering) -2004- Marks 65%
University: M.U., Bodh Gaya, Bihar
„Ï Intermediate -State Board(B.I.E.S.) - 1997- Marks 55%
„Ï Matriculation ¡V State Board. - 1995¡V Marks 61%
Experience Working as a Mechanical Engineer in Lummus Technology heat transfer B.V.
(a C B & ( a CB&I company)
supply of LTHT services range from design engineering to full scope, lump sum turnkey
Supply of fired heaters, waste heat boilers and high- pressure and special type shell and tube heat exchanger.
Lummus
Worked with Enereff engineers Pvt Ltd, New Delhi since July 01' 2005 to April. 31' 2007 as a Mechanical Engineer.

Worked with Bridge & Roof Ltd. IOCL, Panipat, since April. 2004 to June 2005
as Site Engineer, Mechanical

Passport Details H1367383

Job Profile

* Review Technical aspects such as scope / deliverables / schedules / data requirements from client with proposal & project.
* Man-hour & Material take off (MTO) for cost estimation for proposal.
* Review of Heater data sheet
* Pressure Parts Calculation

* Tube / Bend thickness check as per API 530
* Checking of flange ratings as per ANSI B 16.5
* Coil assembly hydro-test pressure calculations as per API 560/ ANSI B 31.3
* Steam service coils ¡V thickness checks as per ASME Sec. I, IBR or local codes as applicable
* External piping, manifold design as per ANSI B 31.3
* Manifolds reinforcement checks as per ANSI B 31.3/Sec I/Sec VIII Div.1/IBR
Mechanical Design
* Design of ITS as per API 560
* Design of Support hangers
* Design of Stack support calculation and lifting lugs
Procurement related
Preparation of material requisitions including Bill of material, procurement specifications.
Pressure parts (tubes, pipes, plain / studded / finned; wrought fittings- bends and elbows; forged fittings- flanges and weldolets.
Tender technical portion ¡V for execution of heaters, steel refractory, coil procurement, fabrication, erection works
Development activity
Software (Excel Sheets for Design calculations)
Engineering Standards (Improvement & update)
Mics. Activity
Review of bought out items like burners soot blowers, dampers, shut off blades, air preheaters, (cast, glass, steam air) expansion joints, skin thermo couples, FD and ID fans
Coordination and correspondence with client/ vendors for technical clarification
Finalization& development of detailing vendor.
Review of Utility piping, gas skid etc.

With Lummus Technology.-
„« Design and Basic engineering of Steam Super heater
QATAR HOLDING - QH, Mesaieed, Qatar
„« Design and Basic engineering of SRT-VI
AGO CRACKING HEATERS, Japan
„« Design and Basic engineering of Delayed Coker
MANGALORE REFINERY & PETROCHEMICALS, Karnataka, India
„« Design and Basic engineering of Delayed Coker NAGARJUNA OIL CORPORATION LIMITED,
Tamil nadu, India
„« Design and Basic engineering of Delayed Coker
GURU GOBIND SINGH REFIERIES LIMITED, Bathinda, India
„« Design and Basic engineering of SRT-VI
INDIAN OIL CORPORATION LIMITED, Panipat, India
„« Design and Basic engineering of SRT-VI
C.P.CHEM, Al jubail, Saudi Arabia

With Enereff Engineers Pvt, Ltd-
* Design and detailed fabrication drawing for FCC Feed Heate,EasserOil Refinery
* Design and detailed fabrication drawing in revamping for Visbreaker Heater IOCL,Mathura
* Design and detailed fabrication drawing for Reactor Feed & Fraction Heater IOCL,Haldia.

Skill Summary „Ï Conversant with Packages
Ms Office, AutoCAD (Any Version), Staad 2000,2005 & 2007
„Ï Well- organized innovative and result oriented Person. Flexible attitude, highly energetic and innovative. Willingness to learn and accept new challenges. Ability to perform under crunch situations. Major strengths are good communication skill, ability to work independently and as well as a team Leader. Willingness to travel and work globally.

Personal Information Date of Birth
05th Aug' 1980
Male
Married
Adaptability, Confidence & Dedication
Hindi, English and Urdu
Islam

CURRENT SALARY: 5 Lacs + Perks +bonus
EXPECTED SALARY: As per company
PREFERRED LOCATION: Any
NOTICE PERIOD: Two Month

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5351 to 5400 of 15508)

Go to Search Parameters...

Brief Description

Mechanical Engineer, Engineering Management, Project Engineer, Reengineering, TQM, Activity Based Accounting System, Production Planning & Scheduling, Budget Controlling, ARIS Toolset, Access

Process Engineer working with DSM(Work Exp. 5 years)

Reservoir simulation, reservoir rock and fluid characterization, production optimization, static and dynamic test analysis

High Voltage Electrical Testing and Commissioning and Electrical Start-up

Caterpillar 3516,789,793 haul truck and support equipment mechanic and supervisor,associate degree and teams management training

I have worked as a Contracts Engineer in both Drilling and Production for more than 20 years, primarily for Shell and Esso. Recently I moved back to Canada after working overseas for 17 years. I am now looking for either ad-hoc or rotational work either in Canada or internationally.

Supply Chain, Procurement, Buyer,Logistics,Sales, Administration, Purchase,buyer

Drilling Engineer now working with NIKO Resources Ltd as a well Site Drilling Eng. and has worked with Oilex Ltd. australian Comapny as NSD,Night drilling Supervisor Niko Resources Ltd west block India, Drilling Eng. Sun Drilling Kazakisthan, Trainee directional Driller Mitchell Drilling (Australia)

I have a Bachelor degree in Agriculture and irrigation sciences and some related experiences in some companies.I would love to work with more companies here and gain experiences.No matter what sort of job but related to water. Thanks

EXPERIENCED METALLURGIST & INSPECTION ENGINEER

I am a Diploma holder in Electronics discipline and one year Instrument mechanic in chemical plant, more than eleven plus years of experience in various plants & projects like Petrochemicals and Refineries. In these years, I have acquired the knowledge of Maintenance, testing and commissioning of d

I HAVE 11 YEARS EXPERIECE AS MOTERMAN ,I AM HOLDING PANAMA THIRD ENGINEER UNLIMITED C.O.C

Well- organized innovative and result oriented Person. Flexible attitude, highly energetic, innovative. Willingness to learn & accept new challenges. Ability to perform under crunch situations. Major strengths are good communication skill, ability to work independently and as well as a team L

To obtain a position that suits my qualifications

To be a dynamic, dedicated, respected and recognised Engineer and to contribute relevant experience to the position applied.

Excellent safety and attendance record. Through knowledge of area roads, highways,airports. Proven record of completing all tasks on schedule and safely. Experienced in operating heavy machinery. Excellent knowledge in rig pumps and equipment. Drilled on rigs ranging from 1800-4500m.

To become an exploration & production team in a progressive upstream oil & gas industry that will allow me to contribute and grow to my fullest potential.

M.Sc(oils,fats&waxes)first class

I have been completed Graduation in Mining Engineering in 2004, having different types of experiences in field & office regarding estalished a New quarry & Crusher set ups , analysis the cost controling factor and having a open cast coal field experence.Also having experence of lime stone Mine.

Seeking an opportunity in accounting or finance. Very ambitious and ready to take any challenges presented.

Material Balance, PVT analysis, Reserves Estimation, Production Enhancement, Workover, Decline Curve Analysis, Pressure Surveys, Field Surveillance and Development

Professional with experience oriented to the seismic interpretation in the exploratory and production area, synthetic seismograms, velocity conversion, Geological and attributes seismic map generation, Evaluation, plan and execution of new wells drilling. Integration geophysical data with petrophysi

Safety officer with more than four years experience in construction field and oil and gas

I am seeking employment as a Petroleum Engineer in Production, Workover & Completion engineer, where I have had some experience of off shore & on shore production workover operations. I believe that my education, experience, and training will enable me to make a significant contribution in differen

5+ Years Experience in field Engineering, Instrumentation, Automation and Control, Mastering Honeywell EXPERION and YOKOGAWA CENTUM CS3000, Outstanding Skill in HMI/MMI Design

experienced underground miner, lead miner, locomotive operator

UK degree in Land Surveying. Experience in railways, civils and site management.

A young Mining & Geological Engineer, able to work by own initiatives and as part of team to achieve the objective set.

To actively contribute to the development and growth of the organization where my analytical, techanical skill and knowledge could be utilized to the optimum extent and eventually facilitate my self in attaining professional excellence.

Five (5) years of work experience as PDS Designer. Results oriented and enthusiastic professional with a solid background in piping design and lay-out. Proven record in delivering quality works and consistent in meeting deadlines. Quick learner, easily adapting to new system of works.

TECHNICAL SKILLS:C,C++,Java,J2EE,SPSS,TORA,ORACLE

Electronic and communication

Senior Document Contoller

E&I Engineer

Creation of master data's for material master, purchasing and maintaining of information records

Water wastewater business development

A Professional Engineer with over 4 years' experiences in Process Control Systems for the design, development & implementation of process control applications, Extensive knowledge in Honeywell Distributed Control Systems' (DCS) Hardware & Software: -TDC 3000/TPS& ExperionPKS systems and FSC, SM Tric

CHEMICAL PROCESS ENGINEER IN PETROCHEM/OIL/GAS INDUSTRY EXPERIENCE

Mine superintendent. Broad management and supervisory, engineering, production, mine startup, contracting, and cross-cultural experience in the underground environment. Mine sup't. Ten-plus years experience in backfill, shotcrete. Extensive xxperience in Latin America and Kosovo.

Master Science + engineering diploma + physic teacher

A professional petroleum engineer based in Hassi Messaoud, Algeria, with over 5 years of experience in various aspects of petroleum engineering. Looking for a challenging and interesting opportunity world-wide. Fields of interest: Reservoir engineering. Production engineering. Petroleum engineering

BE with first class. Action taking, decision making, high confidence level, good team leader, good communication skills, hard working, excellent faultfing skills, logic development and control configs.

I am an Irish national wishing to gain work experience in the USA through the Non-Immigrant Work Visa program. I am educated to Masters Degree level, am a member of the Chartered Institute of Building (MCIOB) and have 10 years site-based management experience on a range of projects.

(2000-Present) Day and Night Drilling Supervisor in Petroiran Development Company (PEDCO) - Persian Gulf - Jack Up Rigs - HPHT with Sour Gas Environment - Exploration, Delineation, Development, Workover, Re-Entry, Directional, Horizontal, Multilateral Wells.

A Chemical Engineer with experience totaling 11 years. I have experience in plant operation with expertise in supervision of a production team of 20 operations personnel. In-depth experience of directing and supervising both onshore and offshore operations.

Seeking a position to utilize my skills and abilities in the Civil Engineering Field that could offer professional growth while being resourceful, innovative and flexible.

Pressure vessels, Heatexchangers and tanks designre

Project Construction and Commissioning Coordinator, Concentrating for MD Totco System Mud Logging Systems

Millwright/Safety

Manager, design systems, HSE mechanical service

First Prev 101 102 103 104 105 106 107 [ 108 ] 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out