Resume - Diploma in industrial automation

Misco Jobs

Resume #85526

CONTACT INFORMATION:
View contact information...

Objective:-
Looking forward for challenging work on electrical & industrial electrical automation system and opportunity for contributing exposing my talent acquired.

Work Experience:-

„« I have worked with ¡* Swarna Electrical Pvt. Ltd. Nagpur.¡¨ as Electrical Technician in which my work scope are.
„Ï Electrical HT/LT and Control side's erection.
„Ï Industrial electrical HT/LT and control cables laying.
„Ï With termination, connection & glanding and cables tray work also.
„Ï Electrical motors panels testing & maintenances.
„Ï HT/LT Panels, control circuit, motor and switch gear testing with meager.
„Ï Electrical HT/LT panels, motors control panel's & switch gears erection.
„Ï Electrical industrial lighting testing, erection & commission.
„Ï Handling Material and man power on site.
„Ï Quick response of breakdown as per time schedule.
„Ï Involved in the preventive maintenance of all system daily, monthly & weekly.
Project done:-
„Ï Maharastra Metal powder Pvt. Ltd. Bhandara M.S.
„Ï Central India Polyster Pvt. Ltd. Nagpur M.S.
„Ï Ashok Layland Pvt. Ltd. Bhandara M.S.
„Ï Government RTO Building PWD Works Gondia M.S.
Duration: 15th May 1999 to Till to 8th Sept 2004

„« I have worked with ¡* Hitek Engineering Service Mumbai.¡¨ As Site Engineer in Automation Department in which my work scope are.

„Ï Hands on fire hydrant, sprinkler and spray automation system for main power control room, sub-station, power transformer, textile, chemical lab, and chemical plants area.
„Ï Control cables laying and panels erection and commissioning.
„Ï Control wrings termination connection and testing.
„Ï PLC programming for fire hydrant motor pump system.
„Ï Panels and motors erection and commissioning.
„Ï Addressable programming for fire control panels of fire fighting.
„Ï Erection & Commissioning of fire water pump house automation of jockey pump, hydrant pump, D.G. by PLC.
„Ï Work with ABB800 PLC, Alan Bradly RX500 PLC and Scada IFIX.
„Ï Erection & Commissioning of solenoid valve, pneumatic valve.
„Ï Arrangement, erection & commissioning of smoke, heat, MCP, hooter, siren for fire system.
„Ï Drafting of schematic for pumps room layout and electrical drawing using AutoCAD.

Project done:-
„Ï ACC cement plant Tikaria U.P.
„Ï ACC cement plant Lakheri R.J
„Ï ACC cement plant Kymore M.P.
„Ï Hindustan Zink Chittorghad R.J.
„Ï Tata Power Distribution Unit Mumbai.
„Ï Tata Power Garneting Unit Trombay Mumbai.
„Ï Alok Textile Daman U.T.
„Ï Tata Battery Ranjangone MIDC Pune
Duration: 18th Jan 2007 to Till to 22nd Nov 2007

„« Now presently working with ¡* Honeywell Automation India Ltd, Pune.¡¨ Through ¡* Transtech Projects Pvt. Ltd. Pune¡¨ As Site Engineer in Projects Department in which my work scope are.
„Ï Preparation of I/O list and projects data.
„Ï Some work on HAIL C200 DCS / CS3000 DCS of Yokogawa.
„Ï DCS Panels and field instrument erection.
„Ï Control cables laying and termination connection and glanding.
„Ï Control connection of DCS panels & instrument sides.
„Ï Loop testing of field to DCS.
„Ï VFD connection and programming.
„Ï LT and Control Panels, motor testing with meager.
„Ï Handling material and documentation reporting.
„Ï Site preparation, mobilization of contractors for carrying out erection activities.
Project done:-
„Ï GMR Group Sugar Plant Haliyal Karnataka.
„Ï DSM Plastic Engineering Ranjangone MIDC Pune.
Duration: 4th Feb 2008 to till date.

Summary of qualifications:-
„Ï Ac/Dc Control System Training in A.V.T.S. Nagpur.
„Ï P.L.C. Programming Training In A.V.T.S. Pune.
„Ï Diploma in Industrial Automation I.D.E.M.I. Mumbai.
„Ï Diploma in Electrical Engineer Ghardchiroli.

Software skill:-
„Ï Operating System: - Windows XP, Windows 98, Windows 2003 Server.
„Ï Software: - Microsoft power point, Microsoft word, Microsoft excel.
„Ï Auto Cad 2005 2D.

Personal Details:-
Date of Birth: 15 Sep. 1981
Sex: Male
Marital Status: Single
Language known: Hindi, English, Marathi

Hobbies: Traveling, Net-surfing, Friend making.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9501 to 9550 of 15497)

Go to Search Parameters...

Brief Description

Completion Supervisor, Cementing, Acidizing, DST, Workover

U/G experience. Currently in an open pit

Eight years experience as a Title Examiner for title companies in Texas.

Posses the ability to develop conceptual and or final mechanical designs, plot plans & equipment arrangements working from P&ID’s or PFD’s. Prepare complete detailed design drawings from P&ID’s, edit specifications and review/markup construction shop drawings for many industries

14 Years of Technical and Service Industry Experience as a Staff and Consulting Engineer within the Environmental, Health & Safety Field.

Pre-casting, Installation, Cast in situ (Wing walls, sleepers, equipment & pipe support, cathodic protection foundations, sub-station & control buildings, RCC pipes for storm water culverts, Right of way, Sectionalizing valve stations

Worked for Exxon January thru March 2004. May of 2004 I went to work for Galleon Energy and supervised the drilling of eight holes in the Peace River Arch. Seven of these wells were gas wells from 1300m to 2300m. The last hole for Galleon was a 1600m oil well. Currently I am working for Shell Canada

M.Tech - Instrumentation and Control Systems; ABB Symphony Harmony, melody DCS - 2 years exp - Power plant Automation

Bachelor of Electrical & Electronics Engineering / Primavera P3 (3.1), MS-Project 2003, AutoCAD 2002

4 Years experience in networking field.Looking for a networking job

Auto Electrician & Aircon Technician for Heavy Bus & other vehicles

Mechanical Design Engineer with 3 years experience in sheet metal and plastic designs.

Recently qualified Electrical/Instrument Technician with High Voltage Experience

Diploma in industrial automation

Infor FMS SunSystems, including Vision XL, Vision Executive, Agresso, SQL, UNIX,

As a senior Mechanical Engineer, has over 10 years experience in the engineering industry, mainly in the water cycle, mining and minerals processing practice sector. He has expertise in fluid mechanics practice area, especially in Water and Alumina processing.

Experienced Manager in the Combined Cycle Power Plant Operations

I can operate AutoCAD and AutoCAD Mechanical, AutoDesk Inventor 9,

Metallurgical engineer with diploma in mechanical engg. and graduate's diploma in computer application

FOXBORO I/A DCS, PLC, HMI, supervisor, manager, FAT / SAT / SIT, design and engineering, project technical team leader

To do maintenance tasks and overhaul all types of mechanical equipment. This includes, but is not limited to, dismantling and stripping equipment, assembling and reconditioning equipment, faultfinding on mechanical equipment and the lubrication of bearings and all moving parts on overhauled equipmen

I am 56 years old married with a 32 year old step-son. Originally from California and settled here in 1984. I hold a valid La Drivers License # 006074258 and a current TWIC card. I will provide a Basic OSHA card if required for employment

5 years extensive experience in spearheading entire gamut of manufacturing operations in areas of production design & maintenance in automobile ,automotive and packaging machines

Service Technician/Welder

Team work and Good communication skills

Bilingual Mechanical Engineer with 22 years experience in planning, management and maintenance.

Various Legal and Oil and Gas Administrative Experience

Profficient in surface, mineral and leasehold title research and reporting, lease aquisitions, due diligence, ROW, affidavits, oil, gas and mineral leases and other instruments.

Pipe Welder

Engineer petroleum

Electrical Engineering Manager/ Project Manager

NOV 2006 onwards. Production specialist. Petrofac Dubai

I have worked in the Barnett Shale for 5 years and am experienced in running title, creating runsheets, dealing with lessors and all aspects of curative tiel work.

Graduated from Poltechnic ITB with GPA 3.05, Skill: Application Analytical of Chmistry, capable gor using GC, AAS,ICP, Petroleum Lab Instrument Oil and Gas

I am willing to relocate my current company is closing. I love working on construction sites and prefer to stay in the mining or construction field

Coiled Tubing Supervisor and Mechanical Power Engineer with 5 years experiance in Schlumberge oil filed service company

Civil engineer with more than five years combined experience in Civil Design, Engineering and Project Management

Eight years experience as Planning Engineer/Project Control, with a broad knowledge on project/construction engineering, cost control, and estimating. Experienced in oil & gas industry ranging from concept selection, FEED, EPC, maintenance (shutdown & non-shutdown), and decommissioning

skilled in computer, having good communication skills.

Four years Engineering experience in Oil and Gas Industry. Recently completed Process Technology

experienced in oil refinery operations,tank farm

Analytical mind and Strong numerical skills

Graduated MSc cum laude in earth sciences. Project Manager with 51/2 years work experience with a multinational natural resource group and a leading consultancy with an eminent client list. Consultant in coordinating and writing environmental impact assessments (EIAs) and in environmental management

Mechanical Engineer with eight years experience in constuction and maintenance field, Currently Maintenace Engineer in Oil and Gas field. AWS certified Welding Inspector

Skilled in Environmental Impact Assessment

5 years experience as a Mechanical Design Engineer includes project management, generating modeling using Pro-Engineer and determining stress analysis using finite analysis software Ansys 8.0, geometric modeling in Gambit to solve flow and heat transfer problems in Fluent 6.1 and energy-efficient HV

Qualified physician in oil fiel, long experiense in emergencies in remote areas and medevacs by road and by plane, good experience in safety and health risk assesment.

14 yrs, in Refinery & Petrochem. Develop& management of cost-effective EHS Programs, Implementation of EMS, Wastewater Treatment, Hazardous Waste, Air Pollution Control Tech., prevention/minimization& recycle/reuse, Knowledge of national and international environmental regulations.

HSE SUPERVISOR AND MAINTENANCE PERSONNEL

I am chemical engineer with 14 years experieced in corrsion inthe industrial water treatment, process units, coating, cathodic protection, and chemical injection.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 [ 191 ] 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out