Resume - Process Engineer - Oil&Gas - Sulphur

Misco Jobs

Resume #85551

CONTACT INFORMATION:
View contact information...

Personal data
Age: 31
Date of birth: October 20th, 1977.
Nationality: Argentine.
Married without children

Work experience

Techint E&C (Argentina) – Process Engineer

December 2008 – March 2009
Camisea Project (Pluspetrol Plant, Perú): As part of the owner engineer group for Pluspetrol I was involved in:

Ethane Recovery Project Conceptual Study where several alternatives were studied and evaluated using Aspen KBASE and in-company cost data.

Malvinas Plant debottlenecking study where the plant off-sites were analyzed and recommendations made to cope with future expansions. Additionally the Slug Catcher was studied to understand current limitations for future expansions.

June 2008 - November 2008
Nitrogen Rejection Unit (NRU). Client: PEMEX. Ciudad Pemex, Tabasco, México:
Two trains of 315 MMSCFD each (Licensor: Costain) at the time the largest installed capacity in world.
Performed Dynamic Simulation (Aspen Hysys Dynamics) to optimize plant control and improve control loops design and tuning. Train # 2 start up: site process engineer during initial start up, covering cool down of plant and liquids generation. Plant operation: Using dynamic simulation and equipment data, plant variables were optimized to prepare the unit for the performance test. Performance Test: Participated in the plant performance test, preparing reports and adjusting design simulations with plant data (The performance test was passed successfully).

December 2007 – January 2008
Camisea Project (Pluspetrol Plant in Cuzco, Perú): Developing of startup procedures, working together with plant operations personnel, for a liquids recovery plant (Depropanizer and DeButanizer).

April 2005 – December 2007
Sulfur Recovery Unit (Petrobras Refinery in Bahia Blanca, Argentina):
Three stage Claus Unit with a BSR-MDEA (WorleyParsons) type tail gas and a DGAASS degassing unit (Goar Allison and Associates) for treating the produced sulphur.
Participated together with SuplhurExperts' technicians and engineers in capacity determination.
Detail engineering, utilities and equipment design. Held P&ID reviews meetings with licensor (Parsons in Arcadia, EEUU). Participated in Hazop meetings with client (Petrobras) and technology licensor (Parsons).
Equipment inspection and pre-commissioning during construction and commissioning of the unit
Start up: As a Process engineer I was in charge of start-up, coordinating tasks between the client and the licensor. Also was in charge of operator training.

April 2005 – December 2006
Sour water stripper (Petrobras Refinery in Bahia Blanca, Argentina) (Project still ongoing): Basic & detail engineering - Equipment inspection, pre-commissioning, commissioning, start up and troubleshooting - for the unit's revamp (The revamp consisted in turning a non refluxed SWS into a refluxed SWS).

August 2003 – February 2004
Depentanizer Unit (Enap Refinery in Talcahuano, Chile): Detail engineering involving consistency check of basic engineering documentation of a depentanizer unit provided by Axens. P&ID's completion, equipment data sheets, flare system design, utilities design.

August 2003
Technical assistance for a wastewater plant at company owned steel mills.

Software used: TSWEET, HYSYS, HYSYS DYNAMICS, PROSIM, Promax, AUTOCAD, HTRI, HTC, B-JAC, ICARUS KBASE, ICARUS IPE.

CHEVRONTEXACO (Argentina) – Drilling Engineer
March 2004 – March 2005
* Work at the drilling engineering department, well planning for 100 development wells. Directional and conventional drilling.
* Near horizontal well drill string design.
* Technical limit study for development wells.

Tecna Argentina (www.tecna.com) – Process Engineer
June 2001 – July 2003
* Engineering company specialized in projects for the oil & gas industry.
* Conceptual engineering for surface production facilities (British Petroleum, Argentina).
* Flare stacks & KO drums design.
* Flare system conceptual & basic engineering for the largest refineries in Argentina, located at La Plata (Buenos Aires) and Lujan de Cuyo (Mendoza).
* Indirect Heater Study for British Petroleum, Argentina. I Studied efficiency and calculated fugitive emission for the system.
* Conceptual engineering design of a bio-oil production plant for Dynamotive (located in Canada, www.dynamotive.com).

Software used: HYSYS, AUTOCAD, PIPESYS, VISUAL FLARE

Buenos Aires Institute of Technology
 Act as Adjunct Professor of Unit Operations II (Heat Transfer Equipment Design) from 2002 to date and as Professor of Unit Operations I (Fluid and Solid Mechanics for Chemical Engineers) from March 2009.

Education

Postgraduate studies
Postgraduate Course in Crude Oil, Oil & Gas Institute (University of Buenos Aires). Beginning: August 2003 (Not Finished Yet).

Degree:
Chemical engineer. Buenos Aires Institute of Technology, Argentina (1997-2002).

Languages

Spanish: native language.
English: advanced oral, writing and reading.
Portuguese: basic oral, writing and reading.

Software/Programs

Capital Cost Estimator: Aspen IPE, Aspen KBase.
Process simulators: TSWEET, HYSYS, HYSYS DYNAMICS, PROSIM Promax, SULSIM.
Pipeline simulators: Pipesys, ASPEN UPSTREAM, Visual Flare.
CAD: (AutoCAD).
CFD: basics of CFD modelling (Using Ansys CFX)
Heat Exchangers: HTRI, HTC, B-JAC (Thermal)
Others: Excel (Programming), Word, PowerPoint, Outlook, Internet Explorer.

Training Courses & Seminars

* AspentTech User Group Meeting – April 2007 – Made a presentation about "using aspen hysys dynamic as an operating procedure developing tool" based on a study case of a SWS
* Sulphur Recovery Seminar – Bernkastel – October 2006
* Hysys Dynamics – Aspentech Buenos Aires – March 2006
* XXII Interamerican Chemical Engineering Congress – Presented a paper in a poster session "Impact on a refinery by the installation of a new SRU"
* Ansys CFX – Introduction to CFD modelling (2006)
* Pressure safety valves (Tecna. March 2003)
* Pipeline design (Dictated by Guillermo Cordero, Techint 2005)
* Control valves (Techint 2005)
* Actuators (Worcester 2005)
* Pore pressure (Drilling Training Alliance, Houston 2004)
* Extended reach (Drilling Training Alliance, Houston 2004)
* Drillstring design (Drilling Training Alliance, Houston 2004)
* Wellbore stability (Drilling Training Alliance, Houston 2004)
* Corrosion in wells and surface facilities seminar (Neuquen 2004)

References
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8101 to 8150 of 15498)

Go to Search Parameters...

Brief Description

Completed my BE (EEE) in india (tamil nadu) in the year 2003-2007.i did one year training in the electrical ,control & instrumentation department

Vacation Job for Graduated Mechanical Enginner

I have 08 years experience in QA/QC NDT, and Welding inspection Field.

I have completed B.Tech in the field of Electrical Electronics Engineering at 2009 and I also completed Diploma in the same field at 2005. I have a year Experience in Government Electricity Department at 2005-2006 in Puducherry, India. I attached my CV for your kind considerat

I POSSESS GOOD COMMUNICATION SKILLS AND I`M CAPABLE OF TEAM WORK.I`M AVAILABLE TO WORK FOREIGN COUNTRIES

I have a good practical knowledge to operate and trouble shoot the following instruments.Spectrophotometer . Gas Chromatograph. Flame photometer. Karl Fischer. Atomic Absorption Spectrometer.Auto Titrator .Flue Gas Analyzer.Ion Chromatograph.Ion selective Electrodes.Viscometer

Have a vast professional experience in road construction; Can handle high pressure with ease and open mind • have handled various critical and challenging projects from design stage to implementation stage and ensured that the projects gets implemented as per specification in stipulated time with

Operate and maintain all aspects of a continuous process plant. This includes the operation of distillation towers under vacuum and pressurized systems with both trays and packing. Operate centrifugal pumps, hydrogen compressors, and thin film evaporators. Operate and maintain all aspects of a cru

Senior operator diploma of mechanical

Bachelor of Engineering, In Electronics and Communication Engineering , „« Currently Working as a Project Trainee Engineer for Bharat Electronics Limited,

Design Engineer with more than a year experience in basic design in ship buildign and boat building industry

draughting

oil and gas shutdown plant inspector and ndt technican

Experienced safety professional and proven leader in the Environmental Health & Safety environment. I've developed and successfully implemented several innovative injury prevention programs which has resulted in millions of dollars saved in Workers' Compensation expenditures.

Bachelor of Engineering (Mechanical)

Mining and petroleum engineer for 5 years, and safety researcher for mining industrials in indonesia for 2 years.

Jackleg, jumbo, mucker, production and development, all types of ground support.

A Mechanical Engineer with Vast experienced in ISO 9000,ISO 14000,QS 9000 and OHSAS 18000 Systems and experienced in Third party inspection and certification services.

Seeking assignments in sales and marketing/Business Development/Client Relationship Management with a growth oriented reputed Organization. I want to excel and grow in an organization and imbibe all the better qualities to become a member of the core team of the organization.

For my 2 years relevant experienced in contracting and other related industries lately job projects in Oil and Gas , I encountered major job aspects in the field of Safety Laws and Regulations implementation internationally wherein I joined the company with the project of Sulf

Senior manager with more than 10 years of experience the Marine response field. ICS trained and proven, at EPA Super Fund sites, as well as emergency response. A strong background in the development and delivery of training, tailors training style to whomever the audience (Responders, Managers, or

BSc (chemistry-physics-math)

Quality Assurance/ Quality Control Inspector

1.B.E. in mining engineer

Ironworker, sheetmetal mechanic

Skills in CadWorx P&ID Pro, CadWorx Plant 2008, Microstation V8. 3 years field experiance. 8 years AutoCad Experiance.

I'm a metallurgical engineer seeking for a challenging position in the mining industry to further enhance skills and analytical abilities while at the same time giving value to the company of which I am working with

I was a Commissioning Engineer at the Rio Tinto Cape Lambert 80 MTPA Port Upgrade in 2008. In 2007 I was the Electrical Engineer responsible for the decommissioning of the original inloading and outloading circuit at the Dampier Port Upgrade Phase B. I excel in a team environment and have a very goo

S1 Teknik Perminyakan UPN "VETERAN" Yogyakarta, IPK 2.76. Pernah bekerja di bidang IT selama 2 tahun. Saya tipe orang yang sopan dan sabar, cepat belajar, good listening, analitis. Karakter tersebut sangat membantu dalam pekerjaan dan tanggungjawab yang saya emban.

Skills in 2D/3D modelling of Piping / Mechanical works using Autoplant Bentley 2004 & Autocad 2006

Last seven years working in the field of QA\QC & Non-destructive testing.

Mechanical engineer, fast learner, good communication skills, social and leadership qualities

HSE Management

Technical Competencies: Geological interpretation by well logs, description of cuttings and core analysis, mud/drilling fluids, porphyry and epithermal system, cementing (thickening time, compressive strength, rheology, fluid loss test), knowledge of Directional Drilling and Drilling Engineering ser

Drilling engineer, Drilling supervisor, Mud and Cement supervisor and Mud and Cement engineer

I am Nechifor Cristinel. I worked in power plant, refineries, oceanic platform with different operations for electrical maintenance, commissioning, construction as electrical technician , electrical inspector or electrical supervisor last time.

Project Construction Manager (Fabrication, installation, Offshore Hook-up)

Process Engineer - Oil&Gas - Sulphur - Refinery

Field Engineer with knowledge in petroleum and geology

Diploma Holder, Pdms Piping Designer, Design and modelling on Pdms, Piping Layout, Equipment Layout, Supporting.

Looking for a suitable job in a dynamic organization where opportunities are available to prove my mental responsibilities are challenging and chances to raise are plentiful.

Well rounded in Experience: Well Engineering, Production Engineering, Project Management, Performance Consultant, Completions experience

Good with Microsoft for Windows. I regard with my self as a communicator both English and Indonesia with high level motivation and self reliance and able to apply both analytical and creative solution to problem solving. Have a good educational background in operation, marketing in Banking & Export

I have 4-yr degree education, I work more then 11 years in Oil&Gas in different position (tehnician, engineer and supervisor)

35 years experience in open pit mining, started as operater worked my way up through the ranks to head of department mining, present employment.

BGAS/CSWIP Painting Inspector Grade 2

Chemical plant operator, 17 years experience, 4 years as plant controller.

I have extensively worked with world renowned engineering firm

Effective comminication, Overall understanding of Technicalities pertaining to my day-to-day activities. Reporting to the Project Manager of SNGP (Saih Nihayda Gas Plant) and Associated Facilities. US$ 150 Million Project, for Petroleum Development Oman, being executed as a Joint Venture Project wit

I am presently working as Advanced Process Control Engineer in one of the leading APC company I am having hands on experience of DMC+,AspenIQ,InfoPlus21, Spyro,Aspen Blend and having a fair exposure of HYSYS simulation software. I am a chemical Engineer from India and worked in Oil refinery.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 [ 163 ] 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out