Resume - I have 15 yrs experience in construction supervision of roads and bridges (RCDG)...

Misco Jobs

Resume #85599

CONTACT INFORMATION:
View contact information...

NATIONALITY: Filipino
BIRTHDATE: July 3, 1968

EDUCATION: B. S. Civil Engineering
M. S. Enverga University Foundation, 1990

REGISTRATION: Registered Civil Engineer, PRC # 64616
Accredited Materials Engineer I
Department of Public Works and Highways

LANGUAGE/DEGREE
OF PROFICIENCY: English – Good
Pilipino – Good
Arabic – Fair

SEMINAR/TRAINING
ATTENDED: Geotechnical Hazard Management:A Case Study of Five Critical
Areas along the Halsema Highway Project and the Engineering
Solutions for These Transportation Problems, PICE – Baguio CPD
Seminars on Transportation Engineering, Jan. 29, 2005, Baguio City

Flood Mitigation in the Philippines: Summary from Flood Summit 2004,
PICE- Baguio, CPD Seminars on Water Resources and Hydraulic
Engineering, Jan. 29, 2005, Baguio City

Changes in National Structural Code of the Philippines (2001
Revision) and Construction Inspection Guidelines for Steel
Structures, PICE – Baguio, Aug. 10, 2002, Baguio City

Civil Engineers in Rural Infrastructures, PICE 23rd National
Convention, Nov. 6-8, 1997, Manila

Concrete mix Design and Trouble Shooting, Master Builders
Technologies, May 18, 1996, Davao City

OTHER SKILLS: Proficiency in Microsoft Office Software, AutoCad 2007 and
SAP 2000 Program

PROFESSIONAL
EXPERIENCE:

(1) January 2006 – Present:Ital Consult
Position Held: Civil Engineer
Project Name: Doubling of 50kms. Najran - Al Hussaniyah Road,
Najran Area, Section 1 and Construction of Link
Roads, Ministry of Transport – Kingdom of Saudi Arabia
Project Description: Construction of two lanes asphalt road with a total width of
11.30m including 2.0m width shoulder at left side and 2.5m width of shoulder at right side. Asphalt road consists of 8cm thick bituminous base course and 5cm thick bituminous wearing course using marshall and super pave design method. Other works are construction of layer by layer earthworks and rock-fill materials on high areas, construction of 30cm thick sub-grade and 20cm thick aggregate base course materials, construction of one (1) to fourteen (14) barrels of reinforced box culvert and construction of two bridges, one has thirty three (33) piers with 15m span pier to pier and the other has twenty one (21) piers with 14m span pier to pier.

DUTIES & RESPONSIBILITIES:
Check shop drawings of reinforced box culverts against standard drawing prior to implementation.

Check change order of the projects to ensure that the quantities are based on the actual.

Assist the Site Inspector to check construction of box culverts and bridges to ensure that approved shop drawings has been followed.

Check the materials before incorporate into works or advice the contractor if the materials are not in accordance to specifications.

Oversee the construction of asphalt pavement to see to it that the required delivered temperature, numbers of utilized equipments and method of constructions are conforms to the specifications.

Delegate jobs of materials inspector, site inspector, quantity surveyor and surveyor to assure that the works has attained properly.

Arrange with the private companies and inhabitants regarding the affected utilities and lands to assure that the smooth operations of the project have been achieved.

Check interim payment certificate of the contractor.

(2) November 2001 – November 2005: BCEOM French Engineering Consultants, In Association with Scott Wilson, Design Science and MGG Consultant
Position Held: Materials & Pavement Inspector
Project Name: Construction Supervision of the Rehabilitation of Baguio-
Bontoc- Banaue Road (Halsema Highway), La Trinidad- Mt. Data Section,
80 kms length. Contract Package 1, NRIMP 1 IBRD- Assisted Highway
Management Project
Project Amount = P 1.0B, Philippines
Project Description: PCCP construction on existing gravel road, construction of asphalt double bituminous surface treatment on selected areas, replacement of one or more slabs of poorly surface existing PCCP, rock excavation by blasting, construction of masonry walls, concrete retaining walls, gabion walls, bio- engineering with coco fiber &
reinforced earth structure, shotcrete/sprayed concrete on very high slope, installation of reinforced concrete pipes & construction of reinforced concrete box culverts.

DUTIES & RESPONSIBILITIES:
: Inspected and checked all the materials delivered in the job site as per quantities and qualities required.

Daily inspection of contractor's field activities to ensure that the work method and materials incorporated into the works are conforms to the plans and specifications.

Supervised field density test for all kinds of materials such as embankments, sub- grade, and base course to ensure that the works are conforms to the plans and specifications.

Advised the contractor on the acceptance or rejection of construction materials intended for use based on test results.

Performed materials survey for probable sources and reporting the approximate quantity available and suitability.

Fully acquaint with the standard procedures of sampling, testing and control.

Kept a record of the daily activities ready for inspection anytime.

Checked and supervised pouring of concrete pavement to ensure that the required slump, time, adding of admixtures and finishing is done properly and with accordance in the plans and specifications.

Recommend for remedial measures for the correction of the unsatisfactory condition of materials and appearance of undesirable concrete and asphalt product.

Supervised for the construction of asphalt double bituminous surface treatment.

Complied strictly with all instructions and memorandums.

(3) February 2001 – October 2001: Self- Employed
Position Held: Civil Engineer
Project Name: Construction of Two Storey Residential House
Project Amount = P 750T, Philippines
DUTIES & RESPONSIBILITIES:
Supervised the construction of hollow block perimeter fence, pouring of footing, column, beams and floor slabs and installation of sanitary pipe lines.

Prepared and submitted to the owner payroll of workers.

Prepared and submitted to the owner list of materials to be purchased necessary for the construction.

(4) May 2000 - February 2001: San Miguel Corporation, # 40 San Miguel Avenue, Ortigas
Center, Mandaluyong City
Position Held: Site Engineer
Project Name: Construction Supervision of Proposed Additional 220 Parking
Slots and Access Road
Project Amount = P 14M, Philippines
Project Description: Construction of PCCP on Parking Lot A & B and access road.
Construction of base course materials, installation of drainage pipe culverts and installation of water pipelines, sprinkler system and parking lightings.
DUTIES & RESPONSIBILITIES:
Employed to supervise the project as Site Inspector, Cost Engineer and Materials Engineer.

Instructed the contractor that all materials delivered to the job site shall pass to client specifications before incorporate into works.

Supervised and checked field density test of existing sub- grade and base course materials.

Supervised and checked all laboratory tests.

Supervised and checked daily activities of the contractor to ensure that the work methods being used are conforms to the plans and specifications.

Checked and endorsed for client approval pouring sequence plans of parking lot submitted by the contractor.

Supervised the construction of access road and installation of reinforced pipe culvert, street lightings and water sprinklers.

Prepared summary of test results of each structures and issued a recommendation for owner's approval remedial measures for failed samples.

Supervised pouring of parking lot and access road to ensure that the approved pouring sequence plans and project specifications has been followed accordingly.

Checked and endorsed to the client monthly certificate or monthly billing for payment.

Prepared and submitted for owner's approval change or variation order.

(5) January 2000 - May 2000: BCEOM French Engineering Consultants STV Lyons
Associations Inc., In association with McGabgut Consultancy.
Position Held: Structural Engineer
Project Name: Construction Supervision of the Restoration of Cebu Transcentral
Road, Contract Package No. 6, Province of Cebu, IBRD- Assisted
Highway Management Project, Loan 3430PH
Project Amount = P 373M, Philippines
Project Description: PCCP construction on existing gravel road, construction of asphalt Shoulder, rock excavation by blasting, construction of walls such as masonry walls, concrete retaining walls and gabion walls and installation of drainage reinforced pipe culvert.
DUTIES & RESPONSIBILITIES:
Checked and reviewed submittals in relation to structures shop drawings to ensure it suited to actual site condition prior to implementation.

Checked bar cutting list of each structures.

Supervised construction of reinforced box culverts and bridge.

Supervised driving of concrete piles for bridges.

Supervised construction of concrete pavement (PCCP).

(6) February 1999 - August 1999: Techil, Inc.
Position Held: Project Engineer
Project Name: Construction of duplex house, cottages, hanging bridge and steel
Footbridge, Philippines
DUTIES & RESPONSIBILITIES:
Supervised the construction of duplex house, cottages, hanging bridge and steel footbridge.

Prepared and submitted to head office daily and monthly accomplishment report.

Prepared and submitted to the owner monthly billing of the whole project.

Prepared and submitted to the owner for approval change or variation order of the whole project.

(7) January 1997 - February 1999: Techil, Inc.
Position Held: Highway Engineer Inspector
Project Name: Construction Supervision of the Road Widening and Upgrading of
Existing Road Networks and Appurtenant Infrastructures Facilities,
Phase I, Project Amount = P 250M, Philippines
Project Description: PCCP construction on the existing gravel road, construction of asphalt shoulder, concrete line ditch, concrete curb and gutter and concrete sidewalk of Manuel A. Roxas Avenue, Widening of Claro
M.Recto and bridge construction along Manuel A. Roxas Avenue.
Project Name: Construction Supervision of the Sacobia Bridge and Centennial
Related Project, Phase II, Project Amount = P 994M, Philippines
Project Description: PCCP construction on the existing gravel road, construction of asphalt shoulder, concrete line ditch, concrete curb and gutter and concrete sidewalk of Panday Pira Avenue, Creekside Road,
Centennial Road, and North Perimeter Road. Construction of Panday
Pira Bridge and Centennial Bridge with concrete piles footing and construction Sacobia Bridge with around 50 meters depth and 2.5
meters diameter bored piles footing in lahar area.
DUTIES & RESPONSIBILITIES:
In- charged of the inspectorate for the highway project consist of the concreting (PCCP) and asphalting (ACP) of four (4) lanes
Creekside Road, Panday Pira Avenue, Centennial Road, Manuel Roxas A.
Highway and Widening of Claro M. Recto Avenue.

In charged of the inspectorate for the construction of Mitchell,
Sacobia and Centennial bridges consist of installation of bars, pile driving and concreting.

Prepared weekly and monthly reports for each projects on the status of accomplishments and program of works.

Checked from time to time the concrete and asphalt batching operation to monitor that the smooth operations are maintained and to ensure that the quality of materials delivered in the job site are as per required.

Revised the details of the project schedule based on the actual output against the program activities of the contractor.

Assisted the Resident Engineer in the checking of monthly certificate of payment or billing of the contractors.

Checked and reviewed the as- staked and as- built plans submitted by the contractors for the projects.

Assisted the Quantity Engineer in the computation of quantity take- off and final quantities.

Involved in the design and preparation of shop drawings prior to the implementation of the projects.

Assisted the Materials Engineer to conduct field density test and laboratory test of the materials.

Issued site instruction when found necessary.

(8) February 1995 - December 1996: Techil, Inc.
Position Held: Civil Engineer Inspector
Project Name: Construction Supervision of the Restoration of Davao City–Digos
Road, Contract Pakage No. 6, Mindanao Area,
IBRD- Assisted Highway Management Project, Loan 3430PH
Project Amount = P 365M, Philippines
DUTIES & RESPONSIBILITIES:
Supervised the construction of all structures in the project such as bridge, reinforced concrete box culvert, pipe culvert and construction of asphalt overlay on existing PCCP and PCCP overlay on existing asphalt.

Checked all materials delivered in the jobsite to ensure that it meet the requirements as called for in the plans and specifications.

Checked and reviewed the as- staked and as- built plans of the project.

Assisted the Quantity Engineer in the computation of quantity for each structures.

(9) February 1993 - January 1995: Tecphil, Inc.
Position Held: Civil Engineer Inspector
Project Name: Construction Management Services for Site Development of Sector II-
98 Has. Resettlement Area Project for Mt. Pinatubo Victims at O'
Donnel, Capaz Tarlac, Philippines
DUTIES & RESPONSIBILITIES:
Reviewed the construction drawings of all structures and other related civil engineering works to ensure that accordance to standard drawings and specifications prior to implementation.

Performed daily inspection of the projects to ensure that the works are conforms to approved plans and specification.

Assigned to check and approve all the materials for the projects before incorporate into works.

(10) January 1991 - January 1993: L. A. Rivera Surveying
Position Held: Civil Engineering Aide
Project Name: Site Development of Various Small, Medium and Large Private Lands,
Philippines
Project Description: Relocation of lot boundaries, subdivide of private lands and conversion of lands into subdivision.

DUTIES & RESPONSIBILITIES:
Assisted to conduct topographic surveys and preparation of site development plans for subdivision.

Assisted the contractor to locate benchmark/reference points when problems arise at site.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 15498)

Go to Search Parameters...

Brief Description

Maintenance & Mechanical Commissioning Supervisor

Mechanical engineer, with 15 years experience in mining mobile equipment maintenance

Proect control enginner cost control and senior planner for EPC projects

I have 15 yrs experience in construction supervision of roads and bridges (RCDG), concrete slope prot. works, RCBC and concrete retaining walls. Presently I am working in Saudi Arabia as Civil Engineer handling big highway proj. designed for asphalt pavement.

Having 15 years of experience as as Design Draughtsman / Autocad Engineer in Oil & Gas, Petrochemical & Manufacturing industries.

QA/QC Manager Welding Engineer Offshore and Onshore

Drilling Excelence Manager for BP Trinidad & Tobago. 10 Years experience in BP as DE/SDE/Org. Capability Manager & Drilling Excellence Manager. 9 Years in Service Company with experience as De/project Manager/Proposal Manager & QHSE Manager.

Sr Instrument Engineer with over 15 years experience in the design and specifications of instrumentation for petrochemical plants, and 2 years for offshore platforms

Structural/Geotechnical Engineering jobs such as Pile design, Retaining wall design and project management

Project/Engineering Manager, 24 yrs Experience in Oil & Gas (Indian Oil Corporation Ltd.) for Development of Terminals & Gas Stations. Projects involve conceptualizing, engineering, budgeting, estimation, tendering, procurement, fabrication, installation, testing, pre-commissioning and commissioning

Piping stress analysis, finite element analysis using ANSYS, Mechanical design, etc.

Experienced Country Manager, skilled in change and open to multicultural environment.

Design skills in steel and concrete of petro chem and power plants.

Production Engineer resume

Hands on site experience in infrastructure works (roadworks ) and buildings works with total 19 + years experiences ( supervision and project management)

Maintenance Electrician

I working for Schlumberger Achievement as Crew Chief Wireline Operator. I perform jobs in location. Working in a Team is one of my compliances, most jobs in Cased Hole and Open Hole, and report to Field Engineer

Coatings & Corrosion Engineer "NACE"

I am 44years old and right now I am still working at PT Pec-Tech Indonesia (RGMI Group), current position as “Senior Process Engineer”. Business line of this company is Engineering/EPC As you can see from my enclosed curriculum vitae; I have long and wide experiences (± 19 years) in Operation Pro

Senior Environmental Engineer/Manager, Multimedia, heavy industry, permitting, compliance, ISO14001

Licensed professional engineer with over twenty-seven years of structural design and deliverables production experience for Industrial, Commercial, Residential, Oil and Gas, and Transportation projects

Upstream and mid-stream experience(27 years) plus underground waste water injection

earned master of science at the University of Oklahoma in the subject of rock mechanics. He has been a professor of production, drilling, completion and stimulation for more than 14 years, and he had earned more than 12 years of field experience.

I am experienced Metallurgical Engineer with unique experience in a broad range of metals/gasars/alloys/composites processing, including alloying, casting, melting, heat treatments, microstructure design. Able to work in quality control, research and development facilities.

I am experienced in reservoir simulation and numerical modelling, foamy heavy oil flow, well testing analysis, production forecast, horizontal and multilateral wells, thermal recovery, water flooding, PVT sampling and analysis.

I have a PhD in Logistics Management and over 20 years work experience in shipping, logistics, supply chain management, airfreight, sea freight, container marketing & operations, port development & expansion, ship and air chartering, project cargo handling, freight forwarding, etc.

Skilled, knowledgeable, and experienced in organizational assessment, strategic planning, business process reengineering, organization design, and change management in oil and gas related operations including production SBU's, upstream and downstream R&D, MIS, and Finance

I have outstanding experience in the design of high-pressure gas transmission line and its associated facilities in valve stations and also a fuel gas supply line plus governor station to 1800 MW combined cycle power plant in South Korea.

Attached herewith is my current RESUME. I would like to be considered for a suitable position in the fields of Applied and Analytical Chemistry, Chemical Process Design and Development, Environmental Engineering, and/or Project Management.

An experienced industrial minerals processor with vast knowledge of kaolin and talc processing. Work experience include 10 years in R&D (process and new product development) and 10 years in academia. Looking for the right opportunity outside the USA and Canada.

A Procurement/Logistics/Admin Manager of 25 years experience in the O & G industry particularly with FPSO's. Has contracted in Thailand/Singapore/Malaysia/Nigeria/Libya/UAE/Qatar/Scandinavia/Europe.

 Over 21 years of experience in the Petroleum exploration Industry.  Have broad experience in the area of drilling and completion fluid design and formulation in on shore as well as off shore wells.

Senior reservoir engineer: 30+ yrs experience in N. America, S. America, and Europe. Denver-based. Available for contract work, long-term or short-term. Fluent in English and Spanish.

Drilling Specialist for 35 years. Postings have included Worldwide Drilling Manager, In-Country Drilling manager, Drilling Engineer, On-Site Drilling Supervisor and Drilling Consultant. Skilled in foreign start-up operations and training of Nationals.

A versatile and Innovative Chartered Accountant of Nine Years post Qualification experience and Eighteen years on the Job Practical Experience

Over 22 years’ professional experience in Conceptual, FEED, Detailed engineering and project management in Oil & Gas, Refinery, Petrochemical and Chemical projects.

27 years industrial minerals experience in open pit mining and mineral processing management. MS Geology, excellent communication skills, team player and leader. Excellent safety record.

Over 12 years (over 4 Years in Gulf Countries) in pre-commissioning and commissioning, start up, daily plant operation and shutdown activities for large oil and gas, refinery and petrochemical plants.

Project Engineer with Australian education, canadian experience and with very good project management skills.

Pipeline, Facilities and Project Engineer.

12 years experience in Warehousing and Logistics operations from in-bound to out-bound w/ purchasing function

More than 18 years of design experience in oil and gas production, gas processing, LNG Production, and projects of refinery, petrochemical and chemical industries. Specific experience in front end and detail engineering, process engineering/flow schemes development, process data sheet preparations

Good working experience on Instrument and control system

Senior Mechanical Piping / Stress / Equipment Engineer BS in Mechancial Engineering USA National

8yrs of working experience in the field of HVAC & Duct Manufacturing. M.S. from KFUPM. B.E. (Mechanical). Areas of Interest Heating, Ventilation and Air-Conditioning. Indoor Air Quality. Facilities Management (Inventory, Space, Maintenance,

QA/QC Enginner

PMO, Planning, Project manager, Program Director

Reliability, Maintenance, Planning and Material Engineer- Mechanical

More than 15+ years experience in process operation

I have 17 years of Planning experiences within oil and gas, petrochemical, mining, power plant and industrial plant construction. I am also an advance user of P3/P5/P6.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out