Resume - C/C++/ VB / SCADA / Electronic / Embedded / Automation / Systems Engineering

Misco Jobs

Resume #85616

CONTACT INFORMATION:
View contact information...

CORE SKILLS:
------------
Core Skills: * Strong commercial development experience
* Bid analysis and preparation
* Numerous client interfacing roles
* Pro-active
* Excellent time management skills
* Mentoring
* Exposure to wide range of industries
* Wide Technology experience
* Always keen to learn new concepts
* Not challenged by new languages
* Ability to work to deadlines
* Ability to work in a pressured environment

CAREER SUMMARY:
------------
Software development of bespoke C/C++/ VB/SCADA/Electronic/Embedded systems within both product R&D and project development roles for the freight, warehousing automation and food packaging sectors, then embarking of 7 years abroad as a self employed software contractor in the controls and automation sector working on bespoke real time systems, SCADA product development, integration within the Rail / Utilities sectors. Returning to Australia permanently in 2003. Contracted in RAAF tactical aircraft simulation involving windows based GUI in VB/C/VC++/GIS/OpenGL/Active-X, then developed a Client/Server substation fault record extraction appl. in VB.NET. Embedded control automation for RAN projects involving C++, and auxiliary applications in VC++.NET, systems design, and more recently developing range of embedded C++ and windows. NET products for the time industry.

OBJECTIVE:
------------
To work in a challenging software / systems development environment involving engineering / control / automation systems. Enhancing design skills and working within a challenging environment.

STATUS:
------------
Single, Non – smoker, Born 27th December 1969, Australian, 39 Years.
------------

CLEARANCE:
------------
Eligible for Australian defense clearance. Necessary information ready for submission.
------------

DEGREE:
------------
UNSW, Bachelor of Engineering ( Electrical ), Honors: Class II Division I ( 73% )
------------

THESIS:
------------
Real Time Computer Control – Automated ball balance Control Project (1st of kind). Involving a 2 degree of freedom motion project. Development of Borland C GUI, Control and data acquisition H/W & S/W, design servo controller electronics. Develop analogue signal processing circuit to track ball from PAL video signal (adapted missile targeting system design). Develop sensor electronics and pcb design, real time digital control algorithms.
------------

COURSES:
------------
Courses: * Rabbit Embedded SBC application development (Dominion Electronics)
* Visual Studio.NET ADO,VB.NET, C#.NET, ASP.NET (Self Study)
* Real Time Computing for Control, ( University of NSW – Post Graduate Level)
* Practical Ethernet, TCP/IP and LAN's, ( IDC Services )
* Citect SCADA Advanced Cicode Programming (Citect)
* Networking for Engineers ( DCS Networks ), ( IPS Services )
* Allen Bradley, DCS networks, ( Allen Bradley IT Department )
* Communications & Meeting Management ( Australian Institute of Management )
* Coal mine safety inductions (various)
* HMAS Waterhen / HMAS Kuttabal Navy/ RAAF Edinburgh base site inductions ( various )
* First Aid Course, ( St. John Ambulance ), multiple renewals.
------------

INTERESTS:
------------
* SCUBA diving (PADI Dive master)
* Camping and hiking
* Travel Photography
* Architectural design
* Independent remote travel and cultures
* Under water photography
* Family history research
* Inventions
------------

SKILLS:
------------
C/C++
ASM
Visual C++/.NET
C#.NET
Borland C++
VB6/.NET
SQL
Visual Source Safe
ADO.NET
PIC
User Requirements
SCADA
Embedded C/C++
Wireless
Real-time
Product Design
RTU/PLC/DCS
Protocol DDK
GUI Design
Circuit Design
Problem Solving
TCP/IP
UDP
Microsoft
Apollo
I/O drivers
Technical writing
Reports
Project Management
Test Plans
Proof of Concept
Systems Design
Rapid Prototyping
ISO 9001
SDLC
OOD
------------

WORK EXPERIENCE:
------------
06/2009-08/2008
Earthed Solutions P/L
Embedded and C# product development – on going projects -
AUS
------------
10/2008 –06/2009
03/2008 –09/2008
01/2007 – 06/2007
Simplex Time Solutions
VB.NET TCP/IP PoE monitor Product Telnet/DHCP/NTP
Embedded C for Lantronix XPORT Ethernet to Serial devices
SNTP Client, VB.NET Pilot products, ATMEL AVR 8051
MCU's, Product audit, Protel 99SE PCB Design, Circuit
Schematics, Technical Design audit on range of products,
PoE Clock Control and Windows Application Development
TCP/IP, SNTP Protocol, Ethereal Analysis. Digi Wireless to
Serial device consultancy, Subcontractor Auditing
Time
Monitoring
AUS
------------
03/2008 – 04/2009
08/2005 – 06/2007
Wormald
Technology
Defence System No.1 {VC++.NET SCCS extraction development & MODBUS, communication test tools,
Embedded 68K C/C++ Fire Panel, Introl 68HC05/11 ASM, embedded redevelop, Project Management}
Defence System No.2 {Embedded 68K C/C++ Fire Panel,
68HC11, 68HC05 ASM, Project Management}
Defence
Fire
Controls
AUS
------------
10/2008 – 12/2008 Certified
Instruments,
Bluegiga Bluetooth WT12 Product Design/Development,
Embedded product design, measurement focus
Electronics
HID
AUS
------------
04/2005 – 07/2005 Citect Scada Product Support Programmer C\C++, Various
Protocols, MFC VC++6.0. VC++.NET 2005 System Builds,
Hot Fixes, SDLC
Scada AUS
12/2004 - 12/2004 Industrial
Automation &
Control
VC++, VB for automation, advanced control and real time modeling and simulation
Heavy
Industry
AUS
------------
07/2004 - 09/2004 NPS Data
Engineering
Div.
VB.NET/SQL, Protection relay Client /Server Application Utility AUS
07/2003 - 04/2004 Thales
Training &
Simulation
Defence VB/C++ Tactical Advance flight Simulator applications (x 6)
Defense
AUS
------------
09/2002 - 12/2002 Microsol * Scada middle ware development + Configuration Utilities
EIRE
------------
05/2002 - 09/2002 Alderly
Controls *
Scada development, C++ driver development Oil & Gas
UK
------------
02/2001 - 09/2001 Microsol * Scada Product Library development + Project Configuration Utilities
EIRE
------------
11/1999 - 12/1999 Schneider
Electric *
Scada middle ware development + SDLC Utilities
UK
------------
08/1999 - 10/1999 Rail Weight * C++ real time app. & SYS I/O Card drivers Railways
UK
------------
07/1998 - 08/1999 Schneider
Electric *
Scada middle ware development, redundant servers Utilities
UK
------------
11/1997 - 12/1997 AOR, * Commission mobile test Laboratory (volunteer) Environment
SYRIA
------------
04/1997 - 09/1997 ABB August, * Project Engineer Oil rig, ESD F&G Oil & Gas
UK
------------
01/1996 - 03/1996 Citect Protocol tester, various DCS and PLC systems I.T./
Engineering
AUS
------------
04/1992 - 12/1995 Colby/Dematic
Colby Handling
Bespoke C/C++/VB controls, PLC, Embedded, Scada, PLC,
Embedded C, Vision sys., Electronics
Warehouse
Packaging
AUS
------------

EDUCATION & CERTIFICATION:
------------
UNSW, Bachelor of Engineering ( Electrical ), Honors: Class II Division I ( 73% )
------------
(*):Contracts as Director of Earthed Solutions PTY LTD (AUS) Est. 2008 – Present; (* ):Contracts as Director of Under Control PTY LTD (UK) Est. 1997 – 2003

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6401 to 6450 of 15508)

Go to Search Parameters...

Brief Description

Dear Sir/Madam, I am an experienced offshore Rig Electrician. Please find enclosed, my resume for your consideration.

I am I have worked extensively on both land and offshore rigs. I always try to perform my job to the best of my ability, with safety to personnel as my #1 goal.

Water industry: French citizen w/U.S. Green card; 27+ years experience in construction & operations and maintenance; electromechanical and site management skills; specialist in process component for W/WW systems

I had more than 20 years experience in Gas Processing plant, previous company I worked for LNG Plant and last position as Utilities Senior Operator and Present company I have been working for Gas Processing as field operator.

Resume CV: To join an offshore drilling company as Rad. operator, Logistics Coordinator any place in the world

I would prefer to work as Commissioning Supervisor in the Middle East.

Objective Production engineer, oilfield engineer, or mechanical engineer in a contracting firm.

Dear Sirs, I am 33 yrs. old, from Romania, Electrical Engineer. I would like to get a job in electrical/administrative petroleum/oil/gas field. Even I've have a Diploma in Electrical field I can accept to work as electrician, technician, foreman, or engineer.

20 years experience in non-destructive testing and inspection as a technician, radiation safety officer, division manager, and project manager.

NACE Certified Coating Inspector #7278, with +20 years of experience, available as (3rd party) Q.A./Q.C. coating inspector, coating surveyor, coating supervisor, vendor surveillance, etc.

I have been working in the Construction Industry for 40 years at all levels up to Construction Manager. I have extensive experience overseas including Africa and Asia. I am looking for similar work and am prepared to work anywhere at immediate notice.

Maintenance of: - Simovert - frequency regulation for the speed control of High Power asynchronous motors 450 KW and 110 KW - Frequency regulation for the speed control of Low Power asynchronous motors - High Voltage switchgear equipments - MCC - Switchgear equipments - Low Voltage -ETC...

I 'm Canadian citizen, I have second class marine engineer.

25 years of experience all over the world in the instrumentation field including 12 years offshore oil platforms, erecting, construction, precommissioning , commissioning and start-up a wide range of pneumatic, hydraulic and electronic instruments, DCS – ESD – F&G systems.

Process Engineer

I accumulated 22 years of experience in the oil industry, most of the time with the Schlumberger service company in the area of Oilfield Services management, Reservoir Evaluation Wire line and Testing.

I have 21 years in Aust Army as Maint Planner/Supervisor with Diploma Engineering (Maint). Experienced trainer in Mincom Logistics computer systems. Willing to relocate nationally or internationally for the right position.

Over twelve years experience in Offshore and Onshore Oil & Gas and Marine Structure Development in National & International government projects. Project engineering management, Engineering, Design, Construction and Project cost estimation.

WORK EXPERIENCE I have 14 years of experience in plant F.C.C ( Fluid Catalic Craking ).Refinery El Palito in Venezuela ( PDVSA ) and experience in Pre commissioning

Over 25 years of exploration drilling and mining experience. Responsible for the coordination of drilling projects in both domestic and international environments.

I was employed by ARCO Indonesia Oil & Gas since April 1980 thru March 1999. My last position was Elect/Instr Supervisor of NGL gas plant refinery located at NorthWest Java sea, for offshore facilities. My current employer is BP-Indonesia, position job as Maintenance Planner.

26 years Mechnical Design Engineering 16 years CAD experience including intensive 3D modeling 14 years product design experience. 12 years manufacturing tooling and facilities experience.

23 years experience in the Electrical Distribution/Electrical Contractor Industry. Wish to acquire a part time or full time position in an office or job site environment.

Job objective: General Supervisor, Field Supervisor, Project Manager or Assistant Project Manager. Interested in overseas opportunities.

Objective: Seeking a career position with a progressive organization where my skills , training and extensive knowledge and experience can be fully utilize, while offering the opportunity for continued career growth.

Highly experienced purchasing and material management professional. Specialized experience in remote, severe climatic locations. Extensive experience in cross cultural work situations.

Curriculum Vitae „h Over 25 years of oilfield experience in Canada „h Mechanic on a seismic crew until tools were stolen „h Roughneck to driller, 11 years as a driller on a drilling rig „h Owner/operator of a vacuum truck business „h Mechanically inclined

BS EE from USA. I have over 14 years of experience in maintenance and projects while working with reputable organization like Exxon, Mobil, Occidental and BP Pakistan in fertilizer, petrochemical and oil/gas E&P industries.

OVER THIRTY YEARS EXPERIENCE AS A FULLY CODED WELDER ALONG WITH FOREMAN, SUPERVISER AND WELDING ENGINEER/CHIEF WELDING ENGINEER POSITONS ALSO UNDERTAKEN ALONG WITH NORMAL WELDER POSITION.

Seeking employment where my years of experience in surface & underground mining & construction, as well as my strong sales, contracting, consulting, and management skills can best be used

Chemical engineer w/ experience in developing various contracts in oil, gas, water, waste treatment & soil road maintenance. Expert w/ performance based contract. Possesses good organizational, team & interpersonal skills. Adept at working & communicating across disciplines & management levels.

Looking for a new challenge at the end of 2003 my present contract end then

Operate, commission and monitor equipment in assigned areas, maintaining parameters with the guide lines of the operating manuals and procedures of 80,000BPD three phase separation multi train crude separation units, 110 MMSCFDgas compression& treatment plants

Strategic Planning Business Development Project and Business Valuation

I’m an international Petroleum Engineer, currently working in Turkish Petroleum Int.Co.Ltd. as a Completion/Workover Supervisor back to back Ankara/TR to Aktjubinsk/KZ, experienced about 20 years on land and offshore, in offices in many companies and projects.

Nobody has climbed up through the steps of success with his hands in his pockets.

Seeking challenging assignments in the field of Process Engineering Design, Simulation and Commissioning with leading organisations of repute in the Petrochemical Industry that offers me opportunities to utilize my engineering skills & experiences for advancement in my career endeavours

I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating and MSc. in design of gas turbines. I have >20years of experience with Engineering and Operating Companies in O&G and Petrochemical fields as Senior Mechanical Engineer in Egypt Enppi and in Qatar QP Offshore and QVC

C/C++/ VB / SCADA / Electronic / Embedded / Automation / Systems Engineering

I completed my degree in Electrical Engineering and had taken and passed the highest National Examination in The Philippines, Professional Electrical Engineers Examinations in 1986. I have a good experience in Oil and Gas, Controls, Fire and Gas Systems, Design, Detailed Autocad Drafting(Isometric),

Instrument Engineer is seeking a challenging Position for growth and career opportunity in Oil & Gas Industry. More than 13 years of experience in Preventive and break down maintenance for power plant & gas plant instrumentations with GE Frame 6 gas turbines, DCS and Mark V control systems.

Associate Degree in Mechanical Engineering Draughting, 10 years Experience in various Mechanical and Plant Layout applications, using Inventor, Autocad, Pro Engineer, MSC Patran. Heavy Engineering Environment, International Earth Moving Machinery Manufacturing Company in South Africa.

BE Mechanical Engineer with 5 years experience in Piping Stress Analysis

Experienced exploration / production geophysicist and geologist with major Exploration Companies

22 years oil field Experians. Higher secondary.

Over 23 yrs of heavy earth field mechanic. AAS in Heavy equipment and diesel Technology. Lack final semester for BA in Training Industry & Business. CAT and Kamatsu trained.

AutoCAD, PDS (3-D modeling). Lead engineer of erection department

I hold a degree in Polymer Eng. from the Federal University of Technology Owerri, Nigeria. I am proficient in Autocad 2D/3D modelling, HYSYS, Bentley Auto Plant/P&ID, Boiler Maker, Autodesk Inventor

HIGHLY COMPETENT IN BUILDING AND ROAD CONSTRUCTION WORK(B.ENGINEERING,CIVIL)

Instrumentation technician with nine years experience in maintenence,repair,calibrating and installing of electrical,electronic and pnuematic equipment.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 [ 129 ] 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out