CONTACT INFORMATION:
View contact information...
CAREER HIGHLIGHTS
* More than 12 years of experience in oil and gas, Scada, co-gen, off shore and petrochemical industry
* Professional experience in EPC, design instrumentation and control system, front end engineering, detailed engineering, construction, commissioning and startup experience
* Excellent in EPCM services including project scheduling and preparation of engineering packages (basic and detail) ensuring applicable standards, codes, guidelines, specifications, regulations and hazardous area classification impact on the design
* Managed, planned and executed projects of Instrumentation maintenance work within budget.
* Supervised a diversified group of people including engineers, technologists and field workers.
* Practiced and familiar with the standard practice instructions [SPI], relevant general purchase [A-Spec], electrical [P-Spec], instrumentation [J-Spec] and piping [L-Spec] specifications, technical drawing [T-Docs] system, SCL engineering process, quality control manuals and other relevant technical specs and engineering standards
* Experienced in installation, maintenance, testing and commissioning of low, medium and high voltage switchgear, bus bars, panels and sub-station equipment
* Hands on experience in Delta V 7.3 & 7.4, Honeywell TPS, PKS, TDC 3000, Foxboro, PLC, SCADA/RTU
* $3.5B Refinery and $4.5B Upgrader Experience
* Outstanding training, leadership and communication skills
PROFESSIONAL EXPERIENCE:
Toyo Engineering Co. Japan June 2006 to March 2009
Dow Corning 3rd Pillar Project
Sr. Control System Engineer
* As a member of the Engineering and Management Team (EMT) the roll is to support and develop guidelines for different EPC's, maintain and improve quality, schedule and working with vendors, 3rd party interface.
* Provided technical advice and professional services to EPC contractors for producing, calculating, designing on site engineering packages, day-to-day support for the process control & automation
* Checked, monitored, mentored, and reviewed the vendor's designed engineering packages for Process automation, utilities, and control system.
* Developed and issued control philosophies, specifications, datasheets, system specification and control system narratives
* Reviewed, checked, updated calculation, approved instrument data sheets flow instrument calculation (Orifice, Venture, Integral Orifice etc), control valves sizing, cable sizing, loop drawings, C&E, Sequence control module, regulatory and advance control, P&ID's, IO segregation, Graphics.
* Prepared instrument index in InTools, C&E, HMI graphics guidelines and engineering specification for control and instrumentation.
* Prepared, TQ, DCN, VP clarification, COSD, analyzer, alarm and trip critically report, material take off (MTOs)
* Worked in Delta V, Allen Bradley PLC5, SLC500, Control Logix, and RSView
* Pump protection, package vendor and IPS review
Sr. Instrumentation and Control System Engineer
Dragon Aromatics Project
* In FEED phase designed control valves sizing (Glove, ARV, Butterfly, PSV) are based on ISA S75.01, CV, MOV, EIV valves instrument data sheet using INtools 6.0
* Designed and review calculation of FE (Orifice, Venturi, Integral Orifice etc) as per ISO 5167, and prepared instrument data sheet.
* Prepared instrument index specification, DCS configuration guidelines and engineering specification for control and instrumentation.
* Attended P&ID screening meeting, prepared DCN, vendor clarification and project explanation meeting with client.
SNC LAVALIN, Canada May 2005-June 2006
Sr. Control System Specialist
SHAYBAH 250 MBCD AXL CRUDE EXPANSION-GOSP 4
* In detailed engineering phase recalculated control valves sizing (Glove, Butterfly), MOV, EIV valves, reviewed flow element calculation and Foundation Fieldbus instrument data sheet using INtools 7.4
* Preparing RFP and RFQ for valves and PCS system.
* Prepared design guild lines for FAT and SAT procedure
* Fiber optic, hook up drawing
Syncrude UE-1, Fort McMurray
* Pre-commission, start-up support in field instrument with PKS system, instrument sewing over, engineering verification, and trouble shooting.
* Reviewed the CPU design of HPM, IO card and provided DCS support for communication with 3rd party interface
* DCS IO check, logic checking, control narratives, back up, modification, field instrument trouble shooting, panel trip report, loop drawing, wiring drawing mark up and implemented in INtools.
* Write up SAT testing procedure, and provided SAT testing support in Experion PKS system
* Loop tuning, DCS shift report, backed up daily system report and maintained hardware and software report.
EXXON NEFTEGAS LTD, KOREA
* Developed and implemented dynamo and iFix graphics for offshore plant in DeltaV 7.4 system
* Built modules in control studio, exploring Delta V 7.3
* Installed/migrated Delta V 7.3 to 7.4 system, Proplus and OPC server, pipes, offshore commissioning support
HONEYWELL, Alberta, Canada Sept 2003 – April 2005
Control System Specialist
SAUDI ARMCO, Yanbu, Saudi Arabia
* Designed HPM/Tricon modules, ETA. FTA, I/O segregations/nested drawing, prepared PCS bill of material (BOM) for ESD, DCS, VMS and CCC
* Built I/O's for CCC, VMS, SMM, DCS logics and controller points in Honeywell TDC3000
* Power load calculation, JB/marshalling wiring database, hook-up, termination diagrams, schematics, loops, DCS database, implementing logic, control narratives and process control. Testing Pre FAT/FAT for HPM points.
* Configured and testing I/O's for CCC, VMS, Data Hiway, EPLCG, and Modus. Designed TPS performance, HPM link unit, MU, PU calculation
* Designed cable schedule database, system alarm, system cable, operator training simulators, MOV and pump Logic
* Logic template for complex loops; motor control philosophy diagrams and MOV control Narratives.
* FTA/SAT specification, NCF, system design doc (SDD), system cable (LCN, UCN) schedules and point configuration guidelines and system design manual
* Implemented analyzers logic, control logic and compressor logic and backed up system report.
* International codes and standards, especially ARAMCO standard.
SUNOCO REFINERY, USA
* Developed and implemented shapes and HMI Web graphics pages.
* Implemented safe view and station configuration
* Built IO and control points in Honeywell Experion R200 system
* Developed design graphics' guidelines for HMI Web
* Configured and tested SCADA I/O's (modbus) in Quick Builder in Honeywell Experion R200
BANTREL CO., Alberta, Canada Oct 2000-July 2003
Instrumentation/Control System Specialist
PETRO CANADA EDMONTON REFINERY CONVERSION PROJECT (RCP1)
* Part of the automation contractor team for the Basic Engineering Phase of the refinery conversion project. Team established to define and maintain standards for DCS/SIS/BMS systems involving 5 EPC companies
* Pre designed instrument list and prepared instrument datasheet
* Designed DCS, SIS/ESD marshalling cabinets
* Designed control room design guidelines and layout
* Created interim estimate for I/O count and I/O modules
* Developed system alarm database and maintained action Log
* Platforms used: Honeywell TDC 3000, Experion, Allen Bradley and Triconex PLC
ENCANA, FOSTER CREEK, SAGD PROJECT
* Performed pre-commissioning, commissioning and start up two unit GT 40MW Co-Gen plant on Honeywell PlantScape R-500/Triconex System, SCADA
* Reviewed/modified/updated control system/instrumentation logic programs and associated documents like logic block diagrams, logic sequence diagrams, instrument data sheets, wiring diagrams and schematics, and loop diagrams
* Carried out DCS/PLC (TMR) interlock testing and performed HRSG and BMS loop checking
* Marked up and reviewed P&ID's
* Interfaced 3rd party devices using Modbus RTU,OPC, performed wiring modifications in DCS and SIS marshalling cabinets
* Configured and troubleshot control valves, MOV's, RTD/TC, pressure and flow transmitters
* Integration of ControlNet/SIM/Ethernet Protocol devices with the Honeywell system including vibration monitoring system (Bentley Nevada), GE Multilink Motor Protective Relays, gas turbine generator (GE Mark V)
* On site support for control schemes / graphics modifications, sequence program testing with client/vendor, DCS interlock testing, and clear action logs in Plantscape system
* SIL, HAZOP, design reviewed, SAGD shift reports
SHELL CANADA, ATHABASCA OIL SANDS DOWNSTREAM PROJECT
* Carried out detail engineering design, construction documents, and pre-commissioning/commissioning work
* Performed loop check sulphur loading, cooling tower, waste water, tank farm, refinery, vapor combustion unit, raw water treatment and co-gen on Magelis and Foxboro
* Involved in instrument datasheet preparation, field control device detailed installation and inspection
* Carried out FAT, SAT and DCS control system loop function testing
* Designed and implemented DCS interlocks
* Designed and prepared datasheet for analyzers, MOV's, control valves, pressure, flow, level and temperature transmitters
* Prepared as builts for loop drawings, logic narratives, control narratives, P&ID's and cause and effects diagrams
* Updated INtools database to reflect as builts
* Calibrated and tested H2S/ O2, gas and fire/smoke detected equipment
General Electric Company UK Feb 1995- Jan 2000
Instrument and Control System Engineer
* Tested, troubleshot, installed compressor control and machine monitoring control system
* Performed instruments/control valves installation, calibration, and commissioning
* Function block, loop drawings and instrument datasheets
* Developed of process and instrumentation drawings (P&IDs)
* Developed of instruments datasheet specifications, hook up drawing
* Received training in Fisher control valves, and Allen Bradley PLC
* Planned and implemented projects within budgets. Managed all maintenance activities, purchased all maintenance materials and maintained budgets.
* Supervised a diverse group of maintenance staff, hired and managed contractors and evaluated their performance and assisted authority to resolve unforeseen conditions encountered in the plant
* Identified problem areas of the instrumentation, control system and recommended solutions for troubleshooting, testing and repairing
EDUCATION:
* M. Eng in control system as a part time at university of Calgary, Canada 2004. (Course taken: Instrumentation, Advance control system, logic design etc)
* Object oriented software development certificate, 2001, SAIT, Calgary, Canada
* B.E. in engineering major instrumentation, Raj, (Nov 1990 to Jan 1995)
COURSES:
* Completed Honeywell Experion R200 certification courses (i.e. C200 controller, control builders, quick builders, HMI, fieldbus, and server configuration etc), boiler control system, OPC, and DeltaV. Honeywell GUS-Pro and Honeywell TDC3000/TPS training. Honeywell Experion R100 and R210 system hardwire and software installation training.
* Completed Delta V configuration and hardware training.
* Construction safety training system under Alberta construction safety association, OH&S, OSSA, CSTS
* INTOOLS, PDS, SIGRAPH
PC SKILLS, ON JOB TRAINING, TOOLS:
* DOS, UNIX, and Windows, XP, 9 8, 2000, NT, AutoCAD 2000, C/C++, JAVA, VBA, Visio, INtools 5.3, 6.0 & 7.4, Oracle 8i, PLSQL, Access, My SQL and Excel
* Testing and measuring instrument, SMART field devices, fisher control valves, Delta V, MTO, INtools and Info works training, HM, NCF, EPLCG, file transfer and EB Factory.
PROFESSIONAL AFFILIATIONS:
Registered with APEGGA
View contact information... |