Resume - attached for Safety Officer designation

Misco Jobs

Resume #85757

CONTACT INFORMATION:
View contact information...

Objective:

Willing to work as a dedicated officer in any risky field and willing to take the responsibility of the safety of where I am working.

Academic Qualification:

* Passed Higher Secondary Examination (HSE) from Board of Higher Secondary Examination, Kerala, India.
* Passed Secondary School Leaving Certificate (SSLC) from Board of Public Exams Kerala, India.

Professional Qualification:

* Diploma in Fire and Safety Engineering from National Institute of Fire and Safety Engineering (NIFE).Cochin, Kerala, India.

Professional Experience:

(1) Company: M/s PROMIX Ready Mix Concrete, Jebel Ali, UAE
Position held: Safety Executive
Duration: From May 2008 to till date

Job description and responsibilities:-

* Implement the site safety policies

* Safety, health environment controls and regulations in order to minimize risk of human loss/disability and material damage.

* Ensure positive attitudes with all personnel to ensure the safety standard are complied with continual improvements.

* Inspection of construction equipments prior to starts work in site.

* Implementation of safety rules while carrying out heavy lifting/erection – men, material and equipments.

* Ensure the proper use of lifting gear, fire extinguisher, color coding etc.

* Inspection of permit to work

* Preparation of incident reports and follows up the documents.

* Implementation of environmental & pollution control procedures at site.

* Attending the safety meeting and reviewing the things going on the site

* Maintain a safe control on COSH items at the workplace

(2) Company: M/s VOUGE Steel Factory LLC, Sharjah, UAE
Position held: Safety Supervisor
Duration: From Oct 2007 to Dec. 2007
Responsibilities:
* Supervision and coordination of all safety activities of the fabrication shop.
* Conducting safety induction meeting and preparing reports.
* Accident/incident reporting
* Preparation of work permit
* Periodical inspection of all electrical machineries and equipments.
(3) Company: M/s HI-TECH Builders, South India's certified builders of Kirby Building System India Ltd. Kerala, India.
Position held: Safety In Charge
Duration: From Jan 2007 to Sep 2007
Responsibilities:

* Supervision and coordination of all safety activities within the fabrication and erection facilities.
* Inspection of work site for identification of unsafe act and unsafe condition.
* Checking of work permit
* Maintenance and use of fire fighting equipments
* Conducting various safety awareness programs
* Periodical inspection of all electrical machineries and equipments.

Training Undergone:
* Fire Fighting Training from NIFE Cochin, Kerala, India.
* First Aid course passed from INDIAN RED CROSS SOCIETY Kerala sector.

Other Activities:
* Foot ball
* Crickets
* Tug of War- College Team Member

Computer Proficiency:
MS Office Applications & Graphic Design Applications

Languages known:
English, Hindi, Malayalam & Arabic

Personal Details:
Date of Birth: 25th May 1988
Sex: Male
Religion: Muslim
Nationality: Indian
Marital Status: Single

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8401 to 8450 of 15508)

Go to Search Parameters...

Brief Description

I have worked overseas and liked it. I have a pass port and a working visa for Brazil. I built a rollercoaster in Brazil. I had 30 carpenters and 15 helpers that didn't speak nor could i speak theirs. but we built the coaster.

•Strong Knowledge of CIS and Western manufactured oilfield related equipment and OCTG markets, policies and regulations, standards, international trade and marketing techniques. •CIS and Western O&G industry related connections •Fluency and literacy in English and Russian. •Computer literate

I am a second year MBA student at The Haas School of Business, U.C. Berkeley with experience in procurement, supply chain, logistics, project management, and consulting. I have 8 years of work experience, specially in supply chain optimization in the Latin American region.

Geoscientist with 8 years of experience working in different phases of exploration, delineation and development projects in Venezuela onshore and offshore areas with a major oil company. Master degree in geophysics from Stanford University. Effective communication skills in English and Spanish.

See Attached Resume

Sr. Drilling engineer - 8 years working experience - MS in Petroleum engineer - - Industrial engineer degree -

Production Technologist with 11+ years experience, expert in Field Development Planning/Implementation), Well Designs, Drilling/Workover, Productivity Enhancements-simulation/Water Shut-off etc., Production Optimization, Well Surveillance, Sand Prediction/Control, Artificial Lift etc.

Experienced directional driller with 26 years drilling rig experience seeking new opportunities.

22 years experience of which 12 years with in the oil sector where I had to Implement systems, overseeing accounting and carrying internal auditing missions, Significant experience in start up process, J.V. management, Fluent in English, French and Arabic.

Seasoned Drilling Sup't - Onshore - with 15 years experience as a Drilling Sup't. 20 years of international experience. 18 years in the Middle East. A logical and systematic problem solver. A cooperative and friendly colleague. English is my mother tongue, but also moderately fluent in French.

Mechanical Engineer with 11 years experience. Skills on corrosion and production engineering. Corrosion engineering experience includes: chemical treatment, NDT and corrosion monitoring. Production engineering experience involves beam pumped, PCP and gas lift wells production optimization.

A dedicated professional with excellent technical, management and inspection skills. I maintain strong supervision, training and motivation abilities. Acknowledged as a dynamic performer with a high level of initiative and commitment to quality. A team player with superb communication skills.

Global HSE Manager

Machine and computer expert

11 years covered in Oil and Gas Plants Instructed as an Instrument technician with theoretical knowledge and practicing on equipments for measurement and control systems from electrical to pneumatic or hydraulic circuits. Worked for big companies: AGIP & SONATRACH (from commissioning to start up)

Production Operator with 6 yrs exp in Petrochemical,Oil & Gas fields

Certificate for draughting position. i have been working since 2004 till 2009. i can draw building plan example structural, architure etc. i also can dram 3D drawing using autocad.

Am adepoju Ademiposi gabriel by name just finished my NYSC,during my youth service i was a site supervisor of construction of Drainage,installation Motorized of Bole-hole in my plce of Primary assingment.

I am an Indian currently employed as HSE Officer with Deutsche Babcock UAE for their DEWA project Jabel Ali. I have more than 3 years of full time work experience. I believe that the skills I have acquired in my professional experience and education will be valuable asset for your organization.

Electrical / Instrumentation Controls Designer with Intools, Autocad, & Microstation

2009 ASME B31.3 Piping Process by DAP Cosultan Jakarta

Instrumentation Engineer looking for a career in the Oil & Gas Industry

diesel equipment mechanic

Operations Manager with 13+ years oil and gas experience. Experience in operations, Hr issues, Safety, contracts, budgets etc. Vast experience in Wireline, Slickline, braided line, electric line, coil tubing & completions/workovers. Exp in jackups, drilling boats, fixed platforms & land rigs.

Sr. E&I designer with over 20 years field engineering experience. US & Canadian citizen/

quality control tech.

MOTORMAN OR CRANE OPERATOR

Experienced in all aspects of the following: -

VISUAL INSPECTION : welding, monitoring,.. --- NDC: Cofrend level II PENETRANT TESTING ...

I am a hardworking Safety Officer/HSE Officer and serious about the my job in a way of performing it.

attached for Safety Officer designation

I am graduate of Cairo University with Bsc. From the faulty of science, geophysics department. I completed an intensive business English and computer course, which sharpened my skills and qualifications. And l had sales courses and communication skills courses from Dale Carnegie Training.

To be Draughtsman or ass architect. Highly self-motivated and goal-oriented professional committed to pursuing a long-term career in Architecture. Hardworking, able to work in a group of people and share ideas with colleagues, fast learner and willing to learn with positive attitude and has a good o

CSWIP 3.1 certified as Welding Inspector. My certificate number: 40083 valid until: 19 April 2014.

Major skills are in construction and people management

I have valid IWCF Well Control, Sea Survival Certificate, Fire Fighting, and H2S. I am self-motivated and willing to work hard, pro active, have a good interpersonal communication skill, good leader ship and I can work individually or in team

HSE Engineer-a good educated, skilled and experienced individual on construction, fire protection and safety operations aspects, attained from exposure in different industry, hard working individually and in team, friendly and outgoing, self-motivated and well- organized

Free! crane driver, rigger,trades assistant,forklift driver , basic scaffolder

Computer Proficiencies

I am diciplinarian, and had strong in interpersonal and comunication skill with experience in leading the group of fishermen to continous their bussiness improvement. I liked to work with the well planning and target oriented. I had a good knowledge of different social culture of indonesia.

I have 4 year of plant operator experience. I hold a valid 4th class power engineering certificate with part A of the third class conplete. I have SAGD and upgrading refinery experience which gave me amounts of skills required in this field of work.

Final year Bsc. Petroleum Engineering student at the University of Trinidad & Tobago. Worked as a Lab technician testing oil & water based muds@ Bariod Trinidad services

I have 10 years in the food industry

I have been in the Oil Field for 7 years. I have worked as a Derrick Hand, Centrifuge Tech and a Mud Engineer. I have a very good understanding of drilling fluids and drilling operations. I am easy to get along with and I have positively influenced all the companies I have worked for.

I am a hard working, friendly, and loyal individual. I strive to learn new things, and am always up to the challenge of the ever changing oil and gas industry. I have been a Coiled Tubing Supervisor with Halliburton for 7 years.

Welder GTAW-SMAW: SS, CS, And Duplex SS. ASME IX – MIGAS, Safety training (MSTS) combined sea survival, fire fighting & first aid.

Exploration Geologist with eighteen months experience. Experienced with core and chip logging and sampling, DD + RC rig supervsion, Drillhole planning, orebody interp and wireframing, project appraisal and generation

I am qualified as a drilling fluids engineer. I have been employed with Baroid Trinidad Services Ltd a member of the Halliburton family.

SAP, LOGISTICS COORDINATOR, EXCEL, WORD, IMPORT/EXPORT, CUSTOMS, LC, PO

B.E Metallurgy & Materials Engineering . I am motivated with good interpersonal skills and communication skills. I try to give my best at what ever I do. I can be a good team member as well as a good team leader as per the requirement.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 [ 169 ] 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out