Resume - Responsible for maintaining mining equipment and responsible for performing safe...

Misco Jobs

Resume #85807

CONTACT INFORMATION:
View contact information...

Age Date of Birth Place of Birth
Nationality Religion
Sex
Civil Status Height
Weight SSS No. TIN No.
Name of Spouse Address

47 years old July12, 1961
Pulilan Bulacan
Filipino
Roman Catholic
Male
Married
5'9"
170 Ibs.
03-6651349-3
188-737-348
Adelina Hernandez
245 Dampol B, Pulilan, Bulacan

Educational Background:

Vocational:

Bulacan College of Arts and Trade 1978 - 1980
Automotive Technician

Secondary:

Dampol 2nd High School 1974 - 1978

Primary:

Dampol 2nd Elementary School 1969-1974

Trainings / Seminars Attended:

July 1981 - December 1981

PNCC-CDCP

On the Job Training Basic on Hydraulic System

November 1991

Fire fighting
ABV Rock GR.P Kb Saudi Arabia.

Summary of Qualification

Has over 25 years of experience in the maintenance and repair of light and heavy equipment joining nine (9) companies spread over 25 years have acquired an extensive experience in maintenance and repair heavy equipment namely: TEREX, KENWORTH, CATERPILLAR, GROVE, SCRAPER, VIBRATORY ROLLER, TRAVEL LIFT, KHOERING CRANES, P & H, ISICHO CRANES, CMI ASPHALT FEVER, SIDE WINDER, CONCRETE PUMP, HINO, IZUSU DUMP TRUCK, MOTOR GRADER CAT, POCLAIN, BACHOE CAT, GARNER DENVER COMPRESSOR, DOZEN TEREX, EUCLID AND MOST RECENTLY ATLAS COPCO'S BOOMER MODEL #175 AND 178, CRAWLER DRILL 642 AND MITRO NOBEL TRUCK, ASPHALT PLANT, L120 VOLVO, HAMM, DYNA PAC.

Work Experience:

August 18, 2008
June 03, 2009 Heavy Equipment Mechanic
(Work Shop Dep't)
Coates Hire Operations
Lot 5 Torpe St,
Moranbah QLD
Australia

Job Description:

Responsible for maintaining mining equipment and responsible for performing safety Plant Operations, repairs and preventive maintenance and follow the procedures carefully reports to the supervisor any problem or trouble on his area of responsibility.

Duties and Responsibilities:

~ Ensure that the machine is well maintained, in good working condition, operated efficiently and safely.
~ To maintain heavy equipment such as Asphalt Paver (Titan 325), Road
Sweeper, Volvo Loader (L 120D) and Milling Machine.
~ Check oil and water regularly and keep the machine clean.
~ Operate the machine in satisfactory manner and hold appropriate license/s.
~ Report faults or problems to Supervisor as soon as they occur.
~ Report machine defects to Workshop.
~ Coordinate works and accept instructions from the Foreman
~ Ensure good housekeeping and safety practices in the work area.
~ Ensure that company policy and procedures are adhered to.
~ Carry out any assigned duties as required by the supervisor from time to time.
~ Prepares and submit daily, weekly and monthly reports.

August 2005 –
March 2007 Generator Mechanic
( Main Workshop )
I.A.P Worldwide Services
Camp Victory Biap
Baghdad, Iraq
APO 09342

Job Description

Responsible for maintaining the 20MW Catterpilar Site model 3516 series 400V:11KV and Cummins 28MW/11KV/50Hz 400V:11KV responsible for performing safety Plant Operations, repairs and preventive maintenance and follow the procedures carefully reports to the supervisor any problem or trouble on his area of responsibility.

Duties and Responsibilities:

~ Ensure that the machine is well maintained, in good working condition, operating efficiently and safely..
~ Check oil and water regularly and keep the machine clean.
~ Operate the machine in satisfactory manner and hold appropriate license/s.
~ Report faults or problems to Supervisor as soon as they occur.
~ Report machine defects to Workshop.
~ Coordinate works and accept instructions from the Foreman
~ Ensure good housekeeping and safety practices in the work area.
~ Ensure that company policy and procedures are adhered to.
~ Carry out any assigned duties as required by the supervisor from time to time.
~ Prepares and submit daily, weekly and monthly report

January 2000 – February 2004

Assistant Foreman
(Production Dept.)
North Luzon Expressway Project Anderson Aspha" Philippines, Inc. Pulilan Interchange, Brgy. Tibag, Pulilan, Bulacan

Job Description

Responsible for maintaining the biggest Asphalt plant in Asia with a capacity of 300 tonnes per hour and responsible for performing safety Plant Operations, repairs and preventive maintenance and follow the procedures carefully reports to the supervisor any problem or trouble on his area of responsibility.

Duties and Responsibilities:

~ Ensure that the machine is well maintained, in good working condition, operated efficiently and safely.
~ To maintain heavy equipment such as Asphalt Paver (Titan 325), Road
Sweeper, Volvo Loader (L 120D) and Milling Machine.
~ Check oil and water regularly and keep the machine clean.
~ Operate the machine in satisfactory manner and hold appropriate license/s.
~ Report faults or problems to Supervisor as soon as they occur.
~ Report machine defects to Workshop.
~ Coordinate works and accept instructions from the Foreman
~ Ensure good housekeeping and safety practices in the work area.
~ Ensure that company policy and procedures are adhered to.
~ Carry out any assigned duties as required by the supervisor from time to time.
~ Prepares and submit daily, weekly and monthly reports.

June 1998 – September 2000

Chief Mechanic
(Motorpool)
Housing and Land Development Project Elegant Star Corporation
Banangan, Sablan Benguet

Job Description

Responsible for maintaining h~avy equipment such as Bulldozer Model D 115, D85, Loader WA - 350-7 Avance Komatsu, Backhoe PC 200-7, Compactor. Dump Truck 360-12 cylinder Isuzu, Engine overhauling, under chassis and under carriage repair, hydraulic troubleshooting, light vehicle repair. portable air compressor, plate compactor and one bugger mixer.

Duties and Responsibilities:

~ Ensure that the machine is well maintained, in good working condition, operated efficiently and safely.
~ Check oil and water regularly and keep the machine clean.
~ Report faults or problems to Supervisor as soon as they occur.
~ Report machine defects to Workshop.
~ Carry out any assigned duties as required by the supervisor from time to time.

February 1994 – December 1998

Chief Mechanic
Housing and Land Development Project Prophil Development Corporation
Suite 312, Makati Executive Center cor., Herrera & Alfaro Sts., Salcedo Village, Makati City

Job Description

Responsible for maintaining 4 units of cranes namely P & Hand Kato RH25, engine overhauling, under chassis repair and under carriage. Hydraulic troubleshooting. Overhaul light vehicles and to maintain mixer trucks, Kubota welding machine and Vibrating compactor.

Duties and Responsibilities:

~ Ensure that the machine is well maintained, in good working condition, operated efficiently and safely.
~ Check oil and water regularly and keep the machine clean.
~ Report faults or problems to Supervisor as soon as they occur.
~ Prepares maintenance checklist and analytical report of equipments. ~Submits maintenance reports and overhauling jobs.
~ Prepares weekly report on material usage and equipments weekly check-up.

May 1993 – June 1994

Heavy Equipment Mechanic
(Main Workshop)
National fnviromental Preservation
BEEA'H (National Environmental Preservation) JubaiL Kingdom of Saudi Arabia

"

Job Description

Responsible for maintaining equipment such as Mercedes Tractor and trailers model 1924, 2632, 3232 OAF Tractor, turbo charger, Komatsu Bulldozer 0-85 A Forklift and loaders CAT 950B. Repair under chassis and under carriage repair and light vehicle repair.

Duties and Responsibilities:

~ Report faults or problems to Supervisor as soon as they occur.
~ Prepares maintenance checklist and analytical report of equipments.
~ Check oil and water regularly and keep the machine clean.
~ Submits maintenance reports and overhauling jobs.
~ Prepares weekly report on material usage and equipments weekly check-up.
~ Ensure that the machine is well maintained, in good working condition.
operated efficiently and safely.

March 1992 –April 1993

Heavy Equipment Mechanic
(Main shop)
Bridge
F.S. Foundation Specialist Plaridel. Bulacan

Job Description

Responsible for maintaining all the heavy equipment such as ISICHO Cranes, P &H and Khoering, Backhoe. Oumptruck. overhaul light and heavy equipment troubleshooting. Repair under chassis and under carriage repair, also responsible for maintaining the batching plant.

Duties and Responsibilities:

~ Prepares maintenance checklist and analytical report of equipments.
~ Check oil and water regularly and keep the machine clean.
~ Submits maintenance reports and overhauling jobs.
~ Prepares weekly report on material usage and equipments weekly check-up.
~ Ensure that the machine is well maintained, in good working condition.
operated efficiently and safely.

November 1991 – December 1992

Heavy Equipment Mechanic (Main workshop)
Saudi Strategic Storage
A.B.V. Rock Group KB.
P.O. Box 7816. Jeddah 21472, KSA

Job Description

Responsible for general reconditioning, overhauling heavy equipment such as Atlas Copco I s H-157 and H-178 Boomers, Crawler, Drills, Roc 642, Pneumatic Impact Machine, CAT Dozer, D8K and D7L P & H Crane, Sky lift and Shot Creek Mixer, Nitro Nobel Truck and Swevex Pump, Air Compressor and Teleporter.

Duties and Responsibilities:

~ Prepares maintenance checklist and analytical report of equipments.
~ Check oil and water regularly and keep the machine clean.
~ Submits maintenance reports and overhauling jobs.
~ Prepares weekly report on material usage and equipments weekly check-up.
~ Ensure that the machine is well maintained, in good working condition, operated efficiently and safely.

September 1990 - July 1991

Heavy Equipment Mechanic (Motorpool)
NIA Feeder Canal
PNCC
Imus, Cavite

Job Description

Responsible for maintenance and overhauling of heavy equipment such as Dump truck, Ken worth C for Model, Hino 7M20L Isuzu Grove RT 655, Poclain CK-150, P & Crane, Khoering Crane, Terex 82,30,82, 50 Model Bulldozer, Loader Model 7261, 7281 and also repair the under carriage and under chassis. Air system and hydraulic troubleshooting.

Duties and Responsibilities:

~ Prepares maintenance checklist and analytical report of equipments.
~ Check oil and water regularly and keep the machine clean.
~ Submits maintenance reports and overhauling jobs.
~ Prepares weekly report on material usage and equipments weekly check-up.
~ Ensure that the machine is well maintained, in good working condition, operated efficiently and safely.
~ Transmission, brake system, cooling hydraulic and fuel system.

July 1988 – December 1990

Heavy Equipment Mechanic
(Main workshop)
Construction and Gasoline Station Ibrahim Alhudaithy Est.
P.O. Box 224 Riyadh KSA.

Job Description

Responsible for maintaining all construction equipment. general reconditioning, overhauling both light and heavy equipment such as Bobcat. Loader. Dump truck, mixer truck and also repairing of European and American vehicles. See to it that quality repair was conducted on every vehicle being repaired. Perform engine tune up if necessary.

Duties and Responsibilities:

~ Prepares maintenance checklist and analytical report of equipments.
~ Check oil and water regularly and keep the machine clean.
~ Submits maintenance reports and overhauling jobs.
~ Prepares weekly report on material usage and equipments weekly check-up.
~ Ensure that the machine is well maintained, in good working condition, operated efficiently and safely.

July 1981 –
June 1988

Heavy Equipment Mechanic (Main shop yard)
Central Shop Yard
PNCC - CDCP
Bicutan, Taguig Metro Manila

Job Description

Equipment repair of all hydraulic crane RT 65, RT 60, Grove, KATO RH 25, Back Hoe, Poclain and 245 Caterpillar, Graders, 12G to 14G, CAT Bulldozer. Terex and Loader, Air Compressor, Garner Denver and Atlas Copco, repair of under chassis and under carriage repair. Overhauling both light and heavy equipment..

Duties and Responsibilities:

);> General reconditioning of all heavy equipment.
);> Check oil and water regularly and keep the machine clean.
);> Ensure that the machine is well maintained, in good working condition, operated efficiently and safely.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 851 to 900 of 15497)

Go to Search Parameters...

Brief Description

F&A , BD role in oil & gas company

20+ Years in Drilling, Sr. Drilling Engineer. Land & Offshore

International HSE Drilling advisor

Water and wastewater Treatment Expert

Document Controller - Certification Supervisor cum Math/Physics/Computer Instructor

High-performing professional with 11 year of successful sales leadership in optimizing & streamlining business operations, expansion of marketing network, consequently achieving and providing high productivity standards across functional sectors of Channel Sales, Network Expansion, Brand Management,

An affiliate member of the Institution of Civil Engineering Surveyors. Experience of close liaison with the Client, Supervisor / Consultant Engineer, Contractor and Sub-contractor’s representative. Proficient in the management of keeping detailed records .

B.E with nearly 17 Years Experience as an Instrumentation Engineer in Construction, Commissioning and Start up, Maintenance support in Power and Oil/Gas plants (On Shore and Offshore) Projects.

SAP, Wall Street, Microsoft Applications, Oracle, Excaliber, AS400, Lotus Notes, Outlook Word, Excel, Powerpoint, Access, Account Control System (ACS), Bondmaster, Certmaster, iValt Imaging System, Structure Analytical Modeling (SAM), Wall Street Office, AM Trust, TAS, Bloomberg, (NOM) New Operatin

21 years in oil and gas industry in field operations

Experienced Designer

Having 14 years experience in Project Quality Management System of EPC projects for Oil & Gas and Petro chemical etc.

Responsible for maintaining mining equipment and responsible for performing safety Plant Operations, repairs and preventive maintenance and follow the procedures carefully reports to the supervisor any problem or trouble on his area of responsibility.

production operations,pre-commissioning,commissioning and start-up, mentoring and training,28 years international experience

Mechanical Q.C. Engineer and Safety Engineer in Construction, Consultancy.

20 years of power generation/desalination engineering expertise

I'm a Metallurgical Engineering Graduate from Regional Engineering college Rourkela in India and have done Masters in Business Administration. I posses techno-commercial experience of 18 years in Commercial functions in Metal & Mining Industry

Project Engineer

civil inspector, site manager, civil engineer

Experience working in electrical and automation field

DCS engineering experience : HoneyWell DCS Experion C300 / C200 / TDC2000 / TDC3000 : over 8 year experience in Oil and Gas field in Canada: Revamping and Commissioning at site, and Testing: Another 10 years PLC experience.

Has 18 years + eexp in field of Automation and control and 7 years Middleast experience Previously employed with ABB and Invensys UAE .

15 years experienced Exploration Geologist (background in geology, drilling and GIS) working with Major and Junior backed exploration focusing on successful programme utilisng motivated teams working in more than 5 countries (Russia, in Eastern Europe and Asia) fluently speaking English and Russian

15 Years plus experience as Geologist; Geological mapping, rock and soil sampling and cross section preparation; Core logging, stratigraphic section measurement. Laboratory and Field Testing of rocks pertaining to Rock Mechanics. Logging of pits and trenches, in situ & laboratory testing and

Facade Design, Curtain walling, cladding design

Seeking consulting assignments whereby I can bring my experience, skills and competencies to bear that will add value to the client

Global Strategic Sourcing / Logistics / Cross-Functional Teams / International / Materials / Procurement / Cost Reduction / Systems Process Management / Inventory Control / Sub-Contract Negotiations

I am a B.Sc. Chemical Engineering Graduate and also having Diploma in Chemical Technology holder and over Twenty (21) years of experience in DCS PANEL and Field operations. I had held Supervisory position in India for nine years. I am fully conversant with Process Operations and Control procedures.

Mechanical Engineer/Supervisor(rotating machinery)

Has more than 20 years of broad experience as a geologist in gold mine in both open pit and underground.

A seasoned Finance & Accounts Professional with thorough knowledge and vast international expertise in the Internal Audit of Upstream Oil & Gas Industry including the Technical Aspects in Exploration and Production (E & P), Full Knowledge of all the types of Costs incurred in the E & P Industry

Extensive experience of combined domestic and international on well logging industry

Civil/Structural engineer

A self-motivated mechanic with over twenty years worldwide experience, in mechanical engineering, on slow, medium, and high-speed diesel, generators, pumps, auxiliaries, hydraulics, and transmissions. I can work by myself, or part of a team with a proactive approach in the work environment.

Electro-Mechanical Engineering Technician, with a demonstrated ability in Research and Development to extract of expandon new or existing corporate core technologies from concept to commercialization, in a variety of industries, including medical devices.

Installation of electrical control,installation of electrical pannel board,installation of equipment overhead crane,trouble shooting,electrical control/machine,termenation of low/high voltage cable jointer

A Senior Quality and Engineering Manager with a wide range of experience in the Oil and Gas industry. Able to work on own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives.

Land Administration from field, technical to office well rounded from lease analyst to Management

Results oriented Senior Piping Designer with experience in managing project scopes, costs, and schedules for numerous small to medium size projects.

Automation Engineer with a Instrument and controls background who has installed and commissioned various DCS Systems worldwide,currently working as a C&I Specialist in the middle east as a client rep. on site acceptance of Control,ESD and Fire & Gas systems.

Extensive experience in the field of HSE and Logistics with both National and International Oil and Gas Operations. These experiences include Drilling/Production/Refining through to HSE Advisory/Consultative roles at Contractor client locations.

Quality System Manager

ITI(NCTVT)ELECTRICIAN) with liecence

Level III vibration Analyst with electronic and mechanical background

Process Engineering Opportunity

40 Years experience as a welder, 15 Years Sub-arc

Dynamic Positioning Control System Specialist

More than 15 years experience in instrumentation, process control, control system (PLC / DCS) and automation (SCADA) design, programming, commissioning and startup, and maintenance. Completed a large variety of the projects in energy, oil & gas, petrochemical process, and water treatment.

Experienced Business Management

Instrument Pipe fitter / supervisor

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [ 18 ] 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out