Resume - I was graduated in Bachelor of Science in Mechanical Engineering and my work exp...

Misco Jobs

Resume #85967

CONTACT INFORMATION:
View contact information...

EDUCATIONAL BACKROUND:
College: Don Mariano Marcos Memorial State University
Course: Bachelor of Science in Mechanical Engineering
Address: San Fernando City, La Union, Philippines
School Year: 1995 to 2000

Secondary: Bethany Mission School
Address: Sta. Marcela, Apayao, Philippines
School Year: 1991 to 1995 (Graduated Valedictorian)

Elementary: Sta. Marcela Central School
Address: Sta. Marcela, Apayao, Philippines
School Year: 1985 to 1991 (Graduated Valedictorian)

WORKING EXPERIENCE:

Company: Parsons International Limited
Project: Tabreed District Cooling Scheme- Al Sowah Island Chilled Water Distribution Pipin
Address: Abu Dhabi, UAE
Position: Mechanical Inspector
Inclusive Date: June 3, 2009 to present

Job Description:
1.Inspection and verification of completed works in conformity with approved shop drawings.
2.Studying of concept lay outs and drawings and record deficiencies noted to Resident Engineer.
3.Checking that the works are being carried out according to the approved procedure laid down in method of statement and to ensure compliance with design specification.
4.Verification of materials delivered at site.
5.Witnessing of Non Destructive Testing at site.
6.Ensuring safety norms, relevant building codes etc. are being observed and report any unsafe method.
7.Understand the sequence of activities at site for executing in any given works and foresee any likely hindrances and report to Resident Engineer.
8.Monitor progress of works at site.
9.Maintain records of inspection, safety and quality notices, and works executed at site.
10.Review method statements submittal and discuss to Resident Engineer for final approval.
11.Verification of as built drawings at site.
12.Review shop drawings submitted by contractor and verify with approved construction drawings and technical specification and discuss to Resident Engineer for final approval.
13.Review contractor monthly progress reports and invoices as per site actual works, delivery of materials, and their installation and discuss to Resident Engineer for Final Approval.

Company: ETA Engineering and Contracting W.L.L.
Project: Dubai Tower, Doha
Address: Doha, Qatar
Position: QA/QC Engineer
Inclusive Date: May 28 to October 10, 2008

Job Description:
1.Attendend weekly progress meeting by the main contractor, client, and ETA management to discuss QC related issues to site.
2.Prepare Project Quality Plan for ETA incorporating as per main contractor Standard Project Quality plan.
3.Preparing of method statements, Inspection Test Plan, and Inspection Checklist for mechanical and electrical works to be submitted to main contractor and consultant for approval.
4.In process inspection of mechanical and electrical works at site and coordinates to main contractor and consultant for inspection.
5.Maintain QC related documents file as per approved Project Quality Plan.
6.Prepare of Work Inspection Request of every finished work to be inspected by the main contractor and consultant and obtain approval signature to them.
7.Conduct material Receiving inspection and coordinate to main contractor and consultant for inspection.
8.Oversee and assisting document controller for implementing proper handling of documents as per established Project Quality Plan.
9.Review approved shop drawings and verification for actual implementation at site.
10.Interact to the Project Engineers and Project Manager at site for QC related problems and discuss for possible solutions.
11.Prepare and maintain log for all QC related documents for easy retrieval and traceability of documents.

Company: SNC Lavalin Gulf Contractors
Project: Ajman-01 & Ajman-02 TABREED District Cooling Plant
Address: Ajman, UAE
Position: QA/QC Engineer
Inclusive Date: Nov. 11, 2005 to April 9, 2008

Job Description:
1.Attend weekly coordination meetings with sub contractors for the quality issue on the project.
2.Set up quality control file s as per company (SLGC) site filing procedures.
3.Prepare related Inspection Test Plans as per SLGC standards and obtain approval to SLGC Sr. QA/QC Engineer, QA Coordinator and Project Manager prior to submit to client (TABREED).
4.Validate that the work executed complies with the quality control requirements as per approved quality documents submitted and signed by Senior QC Engineer.
5.Identify, register, and report deviations, deficiencies, non conformances, and corrective action implementations.
6.Monitoring and report deviations, deficiencies, and non conformances corrective action implementation.
7.Review as built drawings submitted by sub contractors and highlight to SLGC engineering in advance for any deviation noted.
8.Review method of statement and Inspection test plans submitted by the sub contractors and submit for SLGC QA Coordinator and Project Manager for approval.
9.Conduct daily inspection and work progress at site.
10.Highlighting and discuss to site manager any corrective action implementation, which is not carried out according to the approved method of statement with in the defined closing date in a timely manner.
11.Issue notification to client representative visits for inspection and testing witnessing.
12.Conduct site inspection for Civil, mechanical and electrical works for the subcontractors.
13.Review sub contractors site QC Engineers / Inspectors works as per Project Quality Assurance Plan.
14.Lead system inspection with client representative and fill out appropriate inspection summary forms.
15.Provide needed quality control records for systems transfer to commissioning team as per construction/commissioning interface requirements.
16.Maintain quality control records. At the end of construction mandate, obtain contractor's quality control history books and quality documents.
17.Prepare and transfer all quality control related documents for SLGC archiving and to produce copy of handing –over documents for client as per document hand over procedure.
18.Perform factory inspection on local manufactured/assembled project requirements with site discipline engineers led by senior quality control engineer.
19.Assist in the resolution of any site quality related problems.

Company: EEI Corporation
Project: Fairways Tower Project
Address: Fort Bonifacio, Taguig Metro Manila, Philippines.
Position: Sr. Quality Control Engineer II (MEP Inspector)
Inclusive Date: Oct. 1, 2004 to Nov.9, 2005

Job Description:

1.Implementation of the Quality Management and Control program for the project.
2.Daily site inspection and periodical off site inspection.
3.Controlling all inspection activities on site.
4.Completion of necessary documentation to verify the worked performed.
5.Ensuring that inspection requests are implemented.
6.Ensuring that all test reports are verified to meet the contract requirements.
7.To ensure all materials delivered to site are inspected and conform to specified requirements.
8.Witnessing material testing such as; in-situ density, concrete, steel, Leak Testing for pipes such as hydro test, and gravity test, insulation and continuity test for electrical wires and cables with the client representative.
9.Reinforcement bar inspection prior for formwork closing and concreting.
10.Issue and administer Non Conformance Reports as necessary and issue an Corrective Action Report as applicable and ensure follow up
11.Report to the Project Manager any found deficiencies at site.
12.Develop and file Quality Control History of the project as per the company standards.
13.Review contractor's approved submittal and shop drawings and verify at site for actual implementation.

Company: Al Rushaid Construction Company/EEI Corporation
Project: Ethylene Plant Project (Jubail United Petroleum Company)
Address: Jubail, Kingdom of Saudi Arabia
Position: Quality Control Engineer
Inclusive date: Sept. 1, 2003 to May 24, 2004

Job description:
(Fabrication Shop Inspector – September to November)
1.Fit up inspection for fabricated pipe spools prior for welding.
2.Request testing for Non Destructive Examination of all accepted welds as per project standards and specifications.
3.Fit up, and weld inspection for the fabricated structural and piping supports.
4.Final inspection and verification of fabricated pipe spools and supports as per approved isometric and standard supports drawings prior for releasing at site.
5.Material inspections and verification for the pipe spools during fabrication process.
6.Review and checked for mill test certificates of materials used in fabrication.
7.Review and checked approved site instructions, and check for actual implementation at shop.
8.Prepare quality control inspections, non conformances and surveillance reports.
9.Conduct material receiving and daily inspection at shop.
(Test Package Reviewer – December to January)
1.Review and verify test packages required testing, prepare corresponding checklist, arrange all NDE test results including weld mapping for easy traceability on isometric drawings and coordinate to client inspector for approval before releasing to site for testing.
(Piping Inspector (Pressure Test Witnessing Inspection) – February to May
1.Conduct line checking for the pipes, verification for the completeness of the supports, valves, instrumentation tapping points, and verification of non destructive test results for the welds.
2.Verify test required on the approved test packages, check for the test limits points, calibration certificates for the gauges, and inspection for the joints for possible leaks.
3.Coordinate to client inspector for final testing and obtain approval to him after testing was accepted.

Company: Al Rushaid Construction Company/EEI Corporation
Project: Beri Ethane Recovery project
Address: Beri Gas Plant, Jubail, Kingdom of Saudi Arabia.
Position: Quality Control Engineer
Inclusive Dates: Jan.13, 2002 to July 16, 2003

Job description:
Material Receiving Inspector (January 2002 to October 2002)
1. Receiving inspection for the equipments delivered at site.
2.Review mill test certificates as per actual materials heat/cast numbers.
3.Visual inspection and verification as per packing list and approved submittals for the mechanical equipments delivered at site.
4.Prepare quality control inspection and non conformances reports related to the materials delivered at site.
5.Conduct daily inspection for correct handling and proper storage of all materials received at site.
Fabrication Shop Inspector (November 2002 to July 2003)
1.Fit up inspection for fabricated pipe spools prior for welding.
2.Request testing for Non Destructive Examination of all accepted welds as per project standards and specifications.
3.Fit up, and weld inspection for the fabricated structural and piping supports.
4.Final inspection and verification of fabricated pipe spools and supports as per approved isometric and standard supports drawings prior for releasing at site.
5.Material inspections and verification for the pipe spools during fabrication process.
6.Review and checked for mill test certificates of materials used in fabrication shop.
7.Review and checked approved site instructions, and check for actual implementation at shop
8.Prepare quality control inspections, non conformances and surveillance reports.
9.Conduct material receiving and daily inspection at shop.

TRAINING AND SEMINARS ATTENDED

On The Job Training
Company: Philippine Long Distance Telephone Company
Address: San Fernando City, La Union, Philippines
Inclusive Dates: March 22 to April 30, 199

Pipe Fitters Development Training Program
Company: EEI Corporation (Construction Division)
Inclusive dates: September 17 to Oct. 23, 2001
Address: #12 Mangahan St., Bagumbayan, Libis, Quezon City, Philippines

ISO 9001:2000 Orientation
(Quality Management System Application)
Company: EEI Corporation (Construction Division)
Date: November 12, 2004
Address: FAIRWAYS Tower, Makati Philippines

Welding Fundamentals and Inspection Basics
Company: SNC Lavalin Gulf Contractors
Date: May 2, 2007
Address: Ajman, United Arab Emirates

COMPUTER APPLICATIONS LITERACY
Microsoft office and internet applications

GOVERNMENT EXAMINATION TAKEN:
Philippine Licensure Examination for Mechanical Engineers
(Passed) Licensed Number 57894
Date Issued: Nov. 15, 2000

PROFESIONAL ASSOCIATIONS:
Member – Philippine Society of Mechanical Engineers

LANGUAGES SPOKEN:
English, & Tagalog

INTERNATIONAL EXPEREINCE:
Kingdom of Saudi Arabia, United Arab Emirates, Qatar and Philippines

PERSONAL DATA:
Date of Birth: February 23, 1979
Age: 30
Civil Status: Married

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9701 to 9750 of 15497)

Go to Search Parameters...

Brief Description

I have 28 years experience in finance, project control, scheduling and material control working on DoD projects and private sector manufacturing companies in and out of the U.S.

Position as Electro-Mechanical Designer. Open to full-time regular employment or long-term contract arrangement. Extensive experience on CADAM, CADRA and CatiaV4. Also experience with CADEX-CCD and AutoCAD 3-D Solid Modeling. Over 25 years experience.

Senior Instrumentation technical. Diploma in electronics.

I have approximately 12 years experience in oil & gas industry. I am presently considering a position change with a company offering greater responsibility and more career advancement opportunity.

Microsoft project, scheduling, budgeting, estimating, superintendent background

Construction Manager - Worked as Architect, Interior Designer and Civil Engineer

More than three years of industry experience including asset evaluation, reservoir simulation, annual reserve reporting, long term depletion strategy, enhanced recovery evaluations, expert witness testimony, economic evaluation and forecasting.

Application for the Post of Structural Designer/Project Engineer for building structures in your esteemed Company or for any position applicable to my qualifications.

Wastewater treatment, waste management, EIA

To carve a niche for myself in the organization I work for, and prove my abilities, in terms of strong work ethics, to give an advantage to the organization and as extra edge to my career.

Russian/English/French speaking SAP materials controller.

Iam a diploma holder in Mechanical engineering with knowledge in autocad, Pro-e. Working as supervisor , engaged in fabrication & erection of pipelines.

M.Tech (HSE), B.Tech (Safety and Fire Engineering) specialized in oil and gas sector

Petroleum Engineer

I am Technician of all types electrical switchgear panels.

I am seeking for a job in Gulf contries especially community development field, and I have more than 3 years of experience in the community based water supply projects

onshore & offshore "jack up " Drilling supervisor /foreman

A Team Leader,Conveyor Attendant, Operator/Mechanical Technician, Responsible for Flow wrapping machines/Nordenmatic 400 for the production of Tooth Paste. Also responsible for raw material delivery using a valve system in a control room. Mechanical Engineering Technician lll certificate holder.

Training and Supervision of Technicians, Quality Control, Sudying Chemical Engineering - Dipolma level, Soil, Asphalt and Concrete Testing (Lab and Field)

Certified Project Management Professional (PMP from PMI, USA) has extensive experience in technical, commercial and quality management aspects of the construction projects.

Diploma of associate engineer

Negotiating oil and gas leases, joint venture, farmouts, operating agreements, Runsheets, Ownership Reports and other exploration related contracts. Communicating with company staff landmen, mineral owners, and other personnel on an ongoing basis to benefit the company's oil and gas exploration

HND in Petroleum engineering plus 5 years offshore experience

Diploma Civil Engineering

Manejo de micro-computadores y Estaciones de Trabajo. Manejo de Software Básico: Ambiente Windows, Paquete de Office, Internet Explorer. Programas: MESA, PICKIW. Dominio de Español, inglés (Básico).

Welding Inspector/ Qa Qc Inspector

I am a professionally registered mining engineer with 13 years experience in the mining industry. My strengths are leading miners and engineers, developing and executing mining and construction plans, excellent presentation skills, and the ability to make decisions under pressure.

roofbolter 3rd shift single boom or double scoopman-ram car can tram miner -section utility- belt crew belt-power moves

Designer,Planner,Production/Engineering mainternance personeel,Commercial Engineer

I am working for GE Nuovo Pignone as contractor mechanical engineer since 8 years. I have an excellent acknowledge of the Gas Turbine and other rotating equipments as centrifugal compressor and pumps.

Well experienced Technician having an extensive experience in the maintenance and troubleshooting of various HVAC and Refrigeration Installation, seeking for a motivating position related to maintenance, construction and commissioning Processes

Petroleum Landman Seeks Work at Home from Images

Certificate III and IV Mining Exploration/Geoscience + 2 years experience

6 years experience on administration with a comprehensive knowledge of clerical experience, reports, database, and onshore work-over rig materials with expertise in maintenance of oil rig materials.

AutoCAD Operator

BE( Elect & Instrumentation) / Diploma In Industrial Safety / Diploma In (Elec & comm) with 2.5 yrs of Exp In Steel Plant

material co ordinator/motorman

Worked in all phases of the industrial plants. In commisioning, start up and debotlenecking. As a process engineer, with experiencie in process, production, facilities and process control systems. Supervised group of 12 people, implement ISO 9000/1400, Osha 18000, economic evaluations and management

Have a progressive and responsible working experience of eight (8) years dedicated in field of piping engineering, design and drafting. Directly involved in a variety of oil & gas, petrochemical, refinery, and mining projects which starts from Estimation, Front End Engineering Design (FEED),

I have a degree in Mechanical Engineering and a Post Graduate Diploma in Business Studies. I have attainded courses in Health Safety & Environment , Sales/Princples & Strategies etc. I have also worked as a Sales Engineer and Area Sales Engineer respectively. Proficent in use of micro soft office

I was graduated in Bachelor of Science in Mechanical Engineering and my work experiences was in the field of QA/QC in construction of district cooling plant with two years in refinery construction and currently working as a Mechanical Inspector in a consulting firm.

Journeyman I & E Technician: Plant-wide installation, start-up, loop check, calibration, troubleshooting, repair, and maintenance of instrumentation and electrical systems on high pressure gas-fired boilers (produce 250lb. & 900lb. steam flow), turbo-blowers, and water-treatment facilities.

Mr. Papanna has more than 5 years diversified engineering experience in the process, petrochemical and power industries. These duties included developing specifications and requisitioning equipment, performing technical evaluations and making recommendations for purchase, and specifying all testing

Experienced business professional specializing in the development, engagement and closure of long term service business opportunities. Key strengths include strong strategic thinker, planner, managing complex infrastructure bids, managing multi-disciplinary, cross-cultural virtual teams

•Awarded department fellowship to pursue graduate studies. •Secured fourth place in undergraduate engineering. •Skilled in working with IMEX (CMG's reservoir simulator) and E100 (Eclipse simulator). •Received four promotions in a span of three years. •Prepared pipelay/installation reports

I am a geoscientist with a strong technical background with seismic processing, interpretation and analysis experience. Also experienced in shallow geophysics, field sampling, and monitor well installation for environmental projects.

5 Years of SAP Experience in Enterprise Planning, Corporate Strategy Management, Supply Chain Metrics, Data Warehousing (SAP NW – BW, BI), Strategic Enterprise Management (SEM) and Integrated Planning (IP) on NW 7.0 (2004S) & Enterprise Planning on NW07 platform , spanning industries like Oil & Gas

Diploma in chemical technology with 10 over years of experience in petrochemical industry , DCS OPERATION(YOKOGAWA CS-3000), FIELD OPERATION,Now as SENIOR PROCESS TECHNICIAN in singapore

I am holding B. Sc in Quantity Surveying from University of Moratuwa, Sri Lanka. I have over eight years employment in the construction industry as a Quantity Surveyor. Employed by International Contractors

Have experience Road Design, MXROAD Software and AutoCAD Software. Total experience 7 Years 11 months in Road Department.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 [ 195 ] 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out