Resume - As you will see from my resume I have spent the past 28 years working in drillin...

Misco Jobs

Resume #86073

CONTACT INFORMATION:
View contact information...

Desired employment / Occupational field Completion supervisor for offshore and onshore operations

Work experience
September 2007 to June 2009

Work-over and Completion supervisor- Service Leader

Issuing and following-up of well programs, executing, supervision and reporting for work-over jobs as well for rig-less and WO rig (acting as a CM). Performing completion jobs for new wells drilled with drilling rigs and preparing EOWR (End of Well report). Installation of completion for Oil producers (ESP or eruptive mode) and Water Injector wells. Performing and reporting all tests needed for hand-over the well to Production. As major project was a work-over campaign for activation of 16 wells.
All concerning preparation, performing and leading of well-servicing activity (including interactivity with services and logistic companies).
SPIE, Pau- France for TOTAL Yemen

October 2000 to September 2007
Sand Control / Completion Specialist ¨C SVC Leader-Completions
Involved in the on-shore preparation and responsible for the off-shore installation of Sand Control
BHA¡¯s and Production Strings on Deepwater wells, Sand Control Completion types, Frac Packs,
Single Trip, Perf Pack. Production Strings.
Conducting several projects for various clients including: Naoc (Agip), Shell, Conoil, Total, Nexen, etc
Emblematic for this period was the Amenam project ( prepared and completed since the first till the last well ¨Cabout 50wells)
Halliburton Company

Jan 2002 to April 2002
Sand Control / Completion Specialist
Participated for FAT in order to homologate new tools at PES Pau in France.
Halliburton Company

March 2000 - June 2000
Sand Control / Completion Specialist
Involved in the on-shore preparation of Sand Control BHAs¡¯ and Production Strings for Calpurnia off shore sand-control project in Italy.
Halliburton Company

1998 - 1999
Sand Control/Completion -Field and workshop toolman, consultant
Worked with Halliburton Company concerning cementing jobs in the Republic of Moldova, and sand-control jobs for Petrobel Egypt, in Mediterranean Sea, as a tool-operator for Karous and Darphill projects.
Halliburton Company

1995 - 1998
Completion/Sand control Service Specialist
Since 1995 to 1998 I have participated as a consultant with Halliburton Company to perform sand-control jobs in a large number of oil and gas wells, for Petrom and Romgaz in Romania.

In 1996 I have participated with ENTERPRISE OIL EXPLORATION from Scotland, to design and perform a DST offshore job in Bulgaria.
PETROS ( ICOTS)

1992 - 1995
Head of Tester Department
Involved in all testing (DST) operations
PETROS ( ICOTS)

1984 - 1992
Operator, oil field supervisor and Technical Advisor
Run and ensure technical assistance for DST jobs in drilling and production wells both on-shore and off-shore ( Black Sea).
I have experience testing operations at very high depth (over 7000m) both in open-hole and in casing.
I have, also participated for experimental operations for drill string freeing with tester equipment.
ICOTS

1982 - 1984
Employee with ICOTS
Cementing, Special Operations and Transports Enterprise
Performed cementing jobs in very deep oil and gas wells.
Cementing plugs and squeeze cementing jobs, fracturing and acidizing jobs, sand control jobs.
ICOTS

1972 - 1976
"Mihai Viteazul" HighSchool- Ploiesti

1976 - 1977
Reserve officer of Romanian Army with Lieutenant degree
Military status
Romanian Army

1978 - 1982
Petroleum Diplomat Engineer
Oil Well Drilling and Producing of Oil and Gas Field graduated from Oil Well Drilling and Producing of Oil and Gas Field Faculty, Oil and Gas University Ploiesti, Romania

Petroleum Engineer

1999 - 1999
TCP Cross Training Course
(TCP1, TCP2, Loading)
TCP Cross Training Course -Montrose, Scotland, UK

2001 - 2001
Sand Control School
Sand Control School- New Iberia, USA

2003 - 2003
Completion I course-training
Completion I course-training, Montrose, Scotland, UK

2004 - 2004
Completion II course-training
Completion II course-training, Montrose, Scotland, UK

2007 - 2007
Subsurface Safety valves
Subsurface Safety valves, Montrose, Scotland, U.K

2008

Certificate IWCF-Drilling

Course-training, Oil and Gas University Ploiesti, Romania

2008

Certificate RSES

Course-training, Pau, France

2009

Defensive driving

Course-training Kharir, Yemen

Romanian

Understanding Speaking Writing
Listening Reading Spoken interaction Spoken production
C2 Proficient user C2 Proficient user C1 Proficient user C1 Proficient user C1 Proficient user
C1 Proficient user C1 Proficient user C1 Proficient user B2 Independent user A2 Basic User
A2 Basic User A2 Basic User A1 Basic User A1 Basic User A1 Basic User
(*) Common European Framework of Reference (CEF) level

Resourceful and good team worker
Well administration of human resources and material financial values

Analysis and synthesize spirit
Capacity of taking decisions

Performed casing cementing jobs in very deep oil wells.
Cementing plugs and squeeze cementing jobs, fracturing and acidizing Sand control jobs (pumping, blender, filtration, etc)
Designed and performed testing operations at very high depth both in open-hole and casing. Designed and performed experimental operations for drill string freeing with tester equipment (DST)
Sand control tools and completion products: preparation / installation
FAT to homologate new tools

MS Office -Word, Power Point, Excel
Internet, Adobe Reader, Adobe Photoshop

General mechanics, hydraulics, electronics since 1976

References available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 51 to 100 of 15339)

Go to Search Parameters...

Brief Description

Twenty years experience in Mechanical Engineering/Design with the last ten years of continuous experience in pipe stress analysis. Pipe stress analysis, pipe supports selection&design, pressure vessel stress analysis & mechanical design, process equipment technical expertise.

Analytical Chemist, Environment, food, pharmaceutical quality control, research

Making sound E&P technical decisions and recommendations, from generating high-impact exploration prospects to designing optimal wildcat plans; Advanced Geophysical Interpretation Techniques and Analysis; Leadership Experience

Specialization in Procurement/Purchase. qualification : Master Degree in Commerce.

IT management

Process Instrumentation & Control, Project Engineering, SCADA, PCS, ESD, F&G Systems & SIL Analysis, Control System Protocols & Network Security, Control Valves & Flow Measurements, Gas/Petrochemical & Petroleum Plant Design & Refining Operations, Wireless Networks (IEEE 802.15.4, ISA 100.11a)

Accomplished Engineer with 22 years significant design, construction and management experiences in Civil Engineering, and acted as Project Manager on a number of large projects. Led multidiscipline teams for a wide range of projects related to planning, preliminary design, detail design and construc

HSE, Logistics, Fire protection, Contractors administration, site Supervision.

with practical experience in HRM and Marketing & B.D. fields enhanced by theoretical MBA background. Well acquainted with HRM, organizational and marketing practices gathered within my career path. I also have an aptitude for learning and high level of adaptability

Process Flow Assurance Engineer

Mud Engineer in Shallow and Deep Wells as Spud Mud, Polymers, Lignite and Lignosulphonate, PAC, Lime Mud, C.M.C mud, Filtrate Loss Control, Glycerin mud, Inverse mud, GOE, Inverted mud, applied in onshore/ offshore operations, HPHT well.

Holding Ph. D degree in Hydrology, MSc in Geophysics, long term research experinece in groundwater as well as surface water hydrology such as; groundwater investigations, water quality assessment, groundwater monitoring, watershed modeling etc

20 years of experience

MS Geology; structural geology, prospect generation, basin analysis, petroleum systems, clastics, log analysis, field studies, Petrel, training, managment, recruiting

I have a lot of experience in drilling and drilling fluids.Desired position is Fluids Engineer onshore or Company Man onshore.

I have experience and skills in the following areas: Production Management, Quality Engineering, Project Management, and Purchasing

Good team player and a strong believer in teamwork and performance; Good verbal & written communication skills and a continuous improvement focus; Good facilitation skills, networking with industry professionals and performing presentations at workshops and seminars; Good leadership and mentorin

20 yrs of international reservoir engineer experience in evaluation, design, simulation, management and implement of oil and gas exploration and development projects in both E&P Companies and consulting firms

Would you please see my CV and references attached?

Free! Quality Management Specialist

an accomplished project manager, Chartered Engineer, with BSc, MSc, in mechanical engineering, holder of IMechE's Diploma in Engineering Management - (Project Management), extensive experience in design engineering, plant engineering, cost and scheduling, procurement, contract administration

21 yars in Oil and Gas Industry

Install, commissioning and Site Acceptance Test for Substation Control and Monitoring System (SICAM SAS): PROFIBUS FMS (fiber optic cables) protocol between Bay Control Units and Substation Controller

Adaptable, Versatile and highly experienced, Possessing excellent communication skilled at all levels, the propensity to empathize and get on well with people at all levels.Disciplined,Selfmotivated with the ability to motivate others, able to assimilate and retain information quickly, taking a po

Surveying Engineer/Survey Project Manager

I had a master degree in structural engineering from the University of Southern California.

Professional Maintenance and Integrity Manager

Quality Control Manager

20 years of proven success effectively managing maintenance, manufacturing, and production departments

30 years of process design and engineering experience with major EPC and Oil companies in Oil and Gas projects. I am Canadian citizen and a licensed professional engineer in Canada. Presently working with Jacobs Canada Inc as Process Director. Handled multibillion dollar projects.

Free! A forward-thinking, results-oriented TOP OIL AND GAS EXPLORATIONIST with international experience for major and independent oil and gas companies on new ventures and geophysical interpretation. Contributed to ten oil and four gas discoveries in Brazil, Indonesia, Ecuador, Argentina, and Gabon.

Energetic and result-focused professional with extensive project engineering and project management experience. A unique blend of engineering and oil and gas industry skills, including SAGD and CSS operations. Able to implement innovative ideas of problem solving and meet commitments with a customer

I am an experienced EIA and environmental management consultant with experience in mining, oil and gas and construction. I have worked in various countries (Kenya, PNG, Pakistan, Afghanistan, Botswana, Sri Lanka, & UK) & have been environment manager for construction of major dams in Laos & Egypt.

An extremely talented Power Plant chemist with huge background in operating and maintaining Water Treatment plant . boiler water treatment , Cooling water treatment , steam and water analysis, lube & fuel oil analysis , coal analysis , Effluent Treatments and Environmental monitoring

Over twenty years experience as process engineer working with ExxonMobil¡¦s Scanfiner, Phillips¡¦s Zsorb, Crude, FCC units, Hydrotreaters, BTX, Hydrocracker, Cogen, Delayed Coker, Ethylene Cracker Sulfolane and Reformer units. Possess two technical graduate degrees.

Chief structural

Project Manager - FEED - EPC - PMC - Oil/Gas

Cesar has over twenty four years experience as Electrical Engineer and seven years experience as a Control Engineer, having positions such as Regional Sales Manager, Field Engineer, Engineer Project Manager, Electrical Supervisor, System Integrator and Senior Controls Engineer.

Twenty five years experience as a Process Engineer in Chemical Engineering Industry. Specialized in equipment sizing, Simulation (HYSYS, VMG, Pro II, ChemCad), PFD and P&ID preparation, Optimization, Heat Integration, LDT, Pump Hydraulics, PSV and Control Valve sizing

CSWIP AUT/ASNT LEVEL III/AWS-SCWI INSPECTOR

As you will see from my resume I have spent the past 28 years working in drilling and production wells both on-shore and off-shore where I have gained considerable experience. I have strong leadership and organizational skills and a proven ability to manage and motivate a team.

Professsional Manager/ Group General Manager/Managing Director/ Management Consultant/ Chief Executive Officer

I am a Reservoir Engineer with extensive hands on reservoir, field development and management experience. I have worked with sandstone and carbonate reservoirs, EOR processes, risk analysis, reservoir analysis, field development and reservoir surveillance. I have considerable simulation experience.

Mechanical/Marine engineer with extensive exprience in operation, Repair, Construction, Commissioning and Maintenance in Marine, Petrochemical, offshore oil/gas and Wind power industry.

I graduated as a Metallurgical Engineer, B(Ing) at the University of Pretoria in 1986. In 2002 I successfully completed my MBL at UNISA. During my career I attended various in-house and specialised courses to equip myself for the industry and the executive positions.

More than 25 years in OIL & GAS Offshore and Onshore Industry.

Senior Geologist - Develoment Geologist - Advisor

Security operations,Health and safety,HR Management,General and strategic Administartion

Have more than 20 years operation and maintenance experience in the thermal and gas turbine power plants. Spent 10 years in a management role.

Multilingual UK Chartered Accountant With Industrial and African Mining Experience seeking Roles Internationally

First 1 [ 2 ] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out