Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #86164 next resume »»
CONTACT INFORMATION:
View contact information...

PROFILE:

I have been employed by The Expro Group for the last 13 years and have had the opportunity to work in the North Sea, the Gulf of Mexico and currently Australia. My current position is Senior Operations Manager based in Adelaide, Australia.
The principal accountabilities of the position are as follows:

* Supervise and manage operations and resources ensuring the Group's safety and commercial standards are maintained.
* Perform pre-operation planning such as site visits, Hazop meetings, operations meetings
* Liaise with client, sub contractors, third party suppliers and Expro support personnel regarding operations, equipment and personnel requirements.
* Co-ordinate the mobilisation/demobilisation of equipment and personnel.
* Responsible for ensuring all operations are conducted in accordance with QA/HSE and operating systems.
* Responsible for the completion of reports and associated paperwork.
* Liaise with clients to ensure all aspects of their requirements are met or exceeded.
* Manage and develop high levels of internal efficiency, continuous improvement in and between the different products and services while maintaining the highest level of safety.
* Achieve the set budget for the forthcoming year in conjunction with the Business Development Manager and Area Manager.
* Ensure that all Group policies and procedures are communicated and adhered to by staff.
* Foster a culture of safety and quality within the workplace, including managing a recognised quality system.
* Ensure that personnel have the appropriate training and competencies to achieve the required work schedules.
* Interviewing and hiring the personnel to support Expro in providing excellence in operations.
* Review staff performance on a regular basis.
* P&L responsibility for Australia East.
* Deliver Australia East budget in accordance with capex and resources.
* Deliver Excellence in Operations plan for Australia East.
* Manage client interface with Santos and promote Expro's services.

.

Previous to this position, I was Senior Field supervisor in Moomba based on an equal time roster.
My overall responsibilities were, but were not limited to, supervising Expro's daily operations for our customer, Santos SABU. This included the management of five wireline crews, one well test crew, two production support crews, three sand filters and two well integrity crews.

Based in an extremely busy office in Moomba, part of my daily activities included allocating work and crews, processing invoices, ensuring all of the workforce followed procedures, guidelines and adhere to the strict safety requirements in place. I also communicated daily with our customer, Santos and support personnel in the Adelaide office. One of the many responsibilities, was to be available 24/7 to trouble shoot any downhole invention issues on either Slickline operations, electric line operations, coil tubing and completions / workovers.

Prior to becoming Field Supervisor I was Senior Wireline Operator in the Cooper Basin on a 2 weeks on / 2 weeks off rota.
Responsibilities include the safety and smooth running of all Wireline intervention work.
Preparation of equipment for 0.108"/ 0.125" Slickline and 7/32" Braided Line operations, including the daily servicing and upkeep of Volvo/ASEP landline units. Accurate reporting and hazard identification was required on a daily basis.

I was also shift Safety representative and had to chair fortnightly safety meetings and daily morning meetings as part of our target to continuously improve safety in our daily activities.

Before relocating to Australia, four years ago, I was employed by Expro Americas in the Gulf of Mexico as a Senior Wireline Operator on a 21/7 rotation.
Responsibilities included, ensuring all Wireline work was carried out as per client's instructions, running basic Wireline tools like gauge cutters, cleaning wells of Paraffin, setting / pulling plugs, running pressure/temp surveys, gas lift, Fishing and swabbing. The majority of work was on fixed platforms, jackup rigs and drilling boats that also included running completions from start to completion.

While working for Expro North Sea Ltd on the Brent Bravo as aWireline superviser / PICWS on a 2 weeks on / 2 weeks off rota, my responsibilities included the safety and smooth running of all wireline intervention work and associated well services intervention, including completions, coil tubing, electric line, chemical squeezes, tree repairs / testing and the joint supervision of running mostly 7"completions and non selective completions.
I liaised on a day to day basis with the toolpusher and company man when the rig was in completion mode, to ensure all the technical steps in the operation were reviewed prior to implementation of the operation.

I am capable of working well on my own initiative and as part of a team and I possess excellent communication skills both with my team and with other departments.

EXPERIENCE:

I have 13 years experience working within the oil industry, of which the last 5 years has been in Australia, 1 year in the Gulf of Mexico, America and 7 years in the North Sea. Of the seven years in the North Sea, 2.5 years were on the Brent Bravo, 2 years were on the Talisman Clyde platform and 2 years ad – hoc. Over this period I have worked on a variety of offshore platforms where my job has involved basic wireline operations / maintenance, work that included safety valve changeouts, gas lift, plug installations, fishing and completions, to name but a few.
During this time, I also carried out a 4-month minimum compliance audit for Talisman (UK) one of Expro's major clients. This required checks to be done on all Talisman owned equipment, from certification to quality control. There was also the Expro RMS database to update and regular meetings with the client, to submit progress reports.

TRAINING & CERTIFICATES:

* Transport of Hazardous Goods by Road
* Fire fighting training
* Santos Permit to Work Training
* Santos 4x4 Driver Training
* Heat Stress awareness
* Heavy Rigid truck licence
* C2 crane licence
* SVQ Well Services Mechanical Wireline (Level 2)
* Expro Wireline 1,2,3 + 5 courses relating to Wireline operations.
* Wellcap Certificate for Completion- CT – Snubbing - WL
* Quality and safety induction training.
* Risk Assessor course.
* Back to basics phase 1 + 2
* Torquing and flange connection tensioning.
* COSHH Awareness.
* Slinger + Banksman.
* Braided line multi-skilling course.
* BJ multi-skilling course.
* Safe operation of zone power 90ft Logging masts.
* Man Riding.
* Swagelok fittings.
* Accountability for safety.
* Stop 'Du Pont' training for supervisors.
* Offshore medical / Huet certificate (Expired 21/06/07)
* City & Guilds in Electrical Installation

WORK HISTORY:

Oct 2004 – Present: Expro Group Australia,
22 Taminga Street
Regency Park
Adelaide
South Australia
Positions - Senior Operations Manager
Senior Field Supervisor
Senior Wireline Technician

Oct 2003 – Oct 2004: Expro Americas Inc,
610 St. Etienne Road
Broussard
Lafayette
LA 70518
Position - Senior Wireline Tech

August 1996 – Sep 2003: Expro North Sea Ltd,
Kirkhill Place,
Kirkhill Industrial Estate,
Dyce,
Aberdeen.
Position – Trainee / Operator /Senior Wireline Tech / PICWS.

1987 - 1996: A.J Robson (Electrical ) Ltd
Unit 1A Deemouth Center,
South Esplanade East,
Aberdeen.
Position –Electrical Engineer.

1981 – 1987: John R Ewan,
32 Hamilton Place
Aberdeen.
Position – Apprentice Electrician.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 8301 to 8350 of 15312)Go to Search Parameters...
Brief Description
Master of Science degree in Petroleum Engineering from Texas A&M University and Bachelor of Science degree in Mechanical Engineering from Universidad de Oriente (Venezuela) with over seven years of experience in a major oil/gas company.
New self-motivated and determined graduate with great credentials looking for a full time challenging and rewarding Project/Construction Management position
Professional manager with 10+ years experience and Russian native language is looking for challenging position in general administration, finance, sales or marketing.
I have 17 years experience in construction and mechanical applications and would like to explore overseas opportunities.
Successfully leverage my consulting, analytical and academic skills to enter the industry as an environmental specialist – while attaining professional growth through continuing education and a challenging career.
I have worked overseas and liked it. I have a pass port and a working visa for Brazil. I built a rollercoaster in Brazil. I had 30 carpenters and 15 helpers that didn't speak nor could i speak theirs. but we built the coaster.
•Strong Knowledge of CIS and Western manufactured oilfield related equipment and OCTG markets, policies and regulations, standards, international trade and marketing techniques. •CIS and Western O&G industry related connections •Fluency and literacy in English and Russian. •Computer literate
I am a second year MBA student at The Haas School of Business, U.C. Berkeley with experience in procurement, supply chain, logistics, project management, and consulting. I have 8 years of work experience, specially in supply chain optimization in the Latin American region.
Geoscientist with 8 years of experience working in different phases of exploration, delineation and development projects in Venezuela onshore and offshore areas with a major oil company. Master degree in geophysics from Stanford University. Effective communication skills in English and Spanish.
See Attached Resume
Sr. Drilling engineer - 8 years working experience - MS in Petroleum engineer - - Industrial engineer degree -
Production Technologist with 11+ years experience, expert in Field Development Planning/Implementation), Well Designs, Drilling/Workover, Productivity Enhancements-simulation/Water Shut-off etc., Production Optimization, Well Surveillance, Sand Prediction/Control, Artificial Lift etc.
Experienced directional driller with 26 years drilling rig experience seeking new opportunities.
22 years experience of which 12 years with in the oil sector where I had to Implement systems, overseeing accounting and carrying internal auditing missions, Significant experience in start up process, J.V. management, Fluent in English, French and Arabic.
Seasoned Drilling Sup't - Onshore - with 15 years experience as a Drilling Sup't. 20 years of international experience. 18 years in the Middle East. A logical and systematic problem solver. A cooperative and friendly colleague. English is my mother tongue, but also moderately fluent in French.
Mechanical Engineer with 11 years experience. Skills on corrosion and production engineering. Corrosion engineering experience includes: chemical treatment, NDT and corrosion monitoring. Production engineering experience involves beam pumped, PCP and gas lift wells production optimization.
A dedicated professional with excellent technical, management and inspection skills. I maintain strong supervision, training and motivation abilities. Acknowledged as a dynamic performer with a high level of initiative and commitment to quality. A team player with superb communication skills.
Global HSE Manager
Machine and computer expert
11 years covered in Oil and Gas Plants Instructed as an Instrument technician with theoretical knowledge and practicing on equipments for measurement and control systems from electrical to pneumatic or hydraulic circuits. Worked for big companies: AGIP & SONATRACH (from commissioning to start up)
Production Operator with 6 yrs exp in Petrochemical,Oil & Gas fields
Certificate for draughting position. i have been working since 2004 till 2009. i can draw building plan example structural, architure etc. i also can dram 3D drawing using autocad.
Am adepoju Ademiposi gabriel by name just finished my NYSC,during my youth service i was a site supervisor of construction of Drainage,installation Motorized of Bole-hole in my plce of Primary assingment.
I am an Indian currently employed as HSE Officer with Deutsche Babcock UAE for their DEWA project Jabel Ali. I have more than 3 years of full time work experience. I believe that the skills I have acquired in my professional experience and education will be valuable asset for your organization.
Electrical / Instrumentation Controls Designer with Intools, Autocad, & Microstation
2009 ASME B31.3 Piping Process by DAP Cosultan Jakarta
Instrumentation Engineer looking for a career in the Oil & Gas Industry
diesel equipment mechanic
Operations Manager with 13+ years oil and gas experience. Experience in operations, Hr issues, Safety, contracts, budgets etc. Vast experience in Wireline, Slickline, braided line, electric line, coil tubing & completions/workovers. Exp in jackups, drilling boats, fixed platforms & land rigs.
Sr. E&I designer with over 20 years field engineering experience. US & Canadian citizen/
quality control tech.
MOTORMAN OR CRANE OPERATOR
Experienced in all aspects of the following: -
VISUAL INSPECTION : welding, monitoring,.. --- NDC: Cofrend level II PENETRANT TESTING ...
I am a hardworking Safety Officer/HSE Officer and serious about the my job in a way of performing it.
attached for Safety Officer designation
I am graduate of Cairo University with Bsc. From the faulty of science, geophysics department. I completed an intensive business English and computer course, which sharpened my skills and qualifications. And l had sales courses and communication skills courses from Dale Carnegie Training.
To be Draughtsman or ass architect. Highly self-motivated and goal-oriented professional committed to pursuing a long-term career in Architecture. Hardworking, able to work in a group of people and share ideas with colleagues, fast learner and willing to learn with positive attitude and has a good o
CSWIP 3.1 certified as Welding Inspector. My certificate number: 40083 valid until: 19 April 2014.
Major skills are in construction and people management
I have valid IWCF Well Control, Sea Survival Certificate, Fire Fighting, and H2S. I am self-motivated and willing to work hard, pro active, have a good interpersonal communication skill, good leader ship and I can work individually or in team
HSE Engineer-a good educated, skilled and experienced individual on construction, fire protection and safety operations aspects, attained from exposure in different industry, hard working individually and in team, friendly and outgoing, self-motivated and well- organized
Free! crane driver, rigger,trades assistant,forklift driver , basic scaffolder
Computer Proficiencies
I am diciplinarian, and had strong in interpersonal and comunication skill with experience in leading the group of fishermen to continous their bussiness improvement. I liked to work with the well planning and target oriented. I had a good knowledge of different social culture of indonesia.
I have 4 year of plant operator experience. I hold a valid 4th class power engineering certificate with part A of the third class conplete. I have SAGD and upgrading refinery experience which gave me amounts of skills required in this field of work.
Final year Bsc. Petroleum Engineering student at the University of Trinidad & Tobago. Worked as a Lab technician testing oil & water based muds@ Bariod Trinidad services
I have 10 years in the food industry
I have been in the Oil Field for 7 years. I have worked as a Derrick Hand, Centrifuge Tech and a Mud Engineer. I have a very good understanding of drilling fluids and drilling operations. I am easy to get along with and I have positively influenced all the companies I have worked for.
I am a hard working, friendly, and loyal individual. I strive to learn new things, and am always up to the challenge of the ever changing oil and gas industry. I have been a Coiled Tubing Supervisor with Halliburton for 7 years.
First   Prev   151   152   153   154   155   156   157   158   159   160   161   162   163   164   165   166   [ 167 ]   168   169   170   171   172   173   174   175   176   177   178   179   180   181   182   183   184   185   186   187   188   189   190   191   192   193   194   195   196   197   198   199   200   Next   Last
Seach Parameters

Goto Advanced Search...
Keywords: (e.g. mining engineer)Find results with:
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com