Resume - Cesar has over twenty four years experience as Electrical Engineer and seven yea...

Misco Jobs

Resume #86184

CONTACT INFORMATION:
View contact information...

WORK HISTORY / PROFESSIONAL EXPERIENCE:

Employer: INTUITIVE SYSTEM SOLUTIONS, INC. (NAS) 10/01 – 08/2009.
Address: Henderson, NV 89011.
Position: Senior Controls Engineer.
Responsibilities: Automatic Control Systems, PLC panels and loop design. Automatic controls and instrumentation field installation. Instrument calibration, loop validation, commissioning, Ethernet and SCADA installation and setup. Projects start up. Other duties include project management.

Employer: CLEAR CREEK SYSTEMS INC. 08/05 – 06/07.
Address: Bakersfield, CA 93305.
Position: System Integrator (Contractor).
Responsibilities: Assembling, installation and troubleshooting of Automatic Controllers. PLC programming, communication module installation and setup, instruments calibration and loop validation. Reverse Osmosis troubleshooting and maintenance, hydraulic installations, pump stations installation, setup and maintenance. ICCS industrial wastewater treatment technology design and installation, setup and troubleshooting. Storm water treatment controller's installation. Participate actively in project estimation, site management and installation.

Employer: SCOTT CAMPBELL ELECTRIC, INC. 05/05 – 08/05.
Address: Las Vegas, Nevada
Position: Electrical Supervisor (Contractor).
Responsibilities: Electrical Supervision and setup of NDOT 3246 Pump Station, Clark County Nevada. My duties included estimation, site management and installation.

Employer: CAPRIATI CONSTRUCTION CORP. 11/04 – 12/04.
Address: Las Vegas, NV
Position: Supervisor (Contractor).
Responsibilities: Spring Mountain Youth Camp (Clark County Facilities) project supervision. Wastewater treatment plant electric and hydraulic installation, pump system installation and startup, automatic control panel installation and PLC programming. Dissolve oxygen, temperature and PH analyzers and sensors installation, calibration and loop validation.

Employer: SPEC INDUSTRIES INC. 03/03 – 05/05.
Address: Henderson, NV.
Position: Project Manager.
Responsibilities: Design, installation and troubleshooting of AIIR (Biological Wastewater Treatment technology), which included control panels design, PLC programming, instrument installation, calibration and loop validation, mechanical and hydraulic design. Participate actively in project estimation, site management and installation.

Employer: PREMIER WASTEWATER INTERNATIONAL. 01/02 – 03/03.
Address: Las Vegas, NV.
Position: Field Engineer.
Responsibilities: Operation and maintenance of WWTP facilities in Mesquite Nevada. In charge of all electric systems and pump stations. Responsible on-call for the alarm system advises. Installation and maintenance of the automatic lighting systems. Responsible for the chlorine feed system and chemicals management.

Employer: INGECO 01/99 – 08/01.
Address: El Salvador, Central America.
Position: Engineer Manager.
Responsibilities: Design and supervision, including mechanical, electrical and automatic control installations of the Wastewater Treatment Plants. Mechanical installation of paper mill equipments; pneumatic and hydraulic systems, boiler system installation, maintenance services for hotels and industries. Electrical installation for pumps systems. Control and instrumentation installation. Mechanical and electrical project estimation.

Employer: IMISA. 08/95 – 01/99.
Address: Mexico DF.
Position: Regional Sales Manager.
Responsibilities: Sales of Owens Corning insulation, Warrick controls, Watts equipments, Teledyne Laars.
Troubleshooting service for hotels and industries.

Employer: ENERGOPROYECTO. 08/89 – 05/94.
Address: Havana, Cuba.
Position: Engineer Specialist.
Responsibilities: Government Electric Division, energy and power project design and supervision. Substation design and installation 13.8 kv – 480 v for hotels, underground distribution high voltage cable 13.8 kv for town and subdivisions. Underground distribution high voltage cable 34.5 kv. Airport Electrical Substation design and installation.

Employer: STELL MANUFACTURING COMPLEX 08/85 – 05/89.
Address: Havana, Cuba.
Position: Maintenance Electrical Technician B
Responsibilities: Maintenance of electrical and control system in the factory. Industrial Train Service Station design and installation.

EDUCATION
* 2009 Hach authorized instrument calibrator and setup.
* 2009 SIEMENS authorized Magnetic Flow Meter calibrator and setup.
* 2003 US Bachelor Degree of Science in Electrical Engineering (Evaluation by Josef Silny & Associates, Inc., International Education). February 3, 2003. USA.
* 1980 – 1985 Professional Degree in Electrical Engineer. University "Jose Antonio Echevarria". Havana, Cuba.

SKILLS
* Excellent skills in controllers design. PLC and HMI programming (Siemens, Koyo). General knowledge in Allen Bradley, WAGO, GE, etc.
* Instruments installation and setup. Loop validation.
* Knowledge in ISA regulations.
* Excellent skills in engineering submittals.
* Communication module installation, Ethernet communication setup.
* General Electrical Installations: low and high voltage installations, industrial and commercial installations.
* Hydraulic installations. Water and wastewater treatment installation and design.
* Knowledge of OSHA regulation in the construction and industrial environment.
* Computer skills: Microsoft programs (Word, Power Point, Excel, Publisher, Outlook, Internet) Drawings programs (AUTOCAD, Visio, 3D designer).
* English and Spanish language.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 51 to 100 of 15497)

Go to Search Parameters...

Brief Description

As a Principal Process Engineer supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene, and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.

PhD degree, Base metals, Gold exploration, Strong problem-solving and communication skills and my ability to built strong collabritive relationships with subordinates, colleagues. Easy Delegating

Landman, Lawyer, Title Abstractoe, Business manager

My career encompasses over 25 years of professional experience as a project manager and supervisory scientist working in diversified environmental policy and regulatory evaluation, international fisheries and forestry management, and the effects of environmental change on landscapes and freshwater a

front-end engineering design (FEED), engineering, procurement & construction and test & commissioning of wireless network planning & design, backhaul microwave, satellite network and fiber optic transmission systems. Proven ability to design and implement large-scale wireless network and fiber optic

23 years experience including IT management, systems architecture and design, analysis, modelling and development, training as well as IS/IT strategies and frameworks for management information systems.

Free! Analysis/Design/Construction Heavy Concrete and Steel Industrial Structures/Foundations

Twenty years experience in Mechanical Engineering/Design with the last ten years of continuous experience in pipe stress analysis. Pipe stress analysis, pipe supports selection&design, pressure vessel stress analysis & mechanical design, process equipment technical expertise.

Analytical Chemist, Environment, food, pharmaceutical quality control, research

Specialization in Procurement/Purchase. qualification : Master Degree in Commerce.

IT management

Process Instrumentation & Control, Project Engineering, SCADA, PCS, ESD, F&G Systems & SIL Analysis, Control System Protocols & Network Security, Control Valves & Flow Measurements, Gas/Petrochemical & Petroleum Plant Design & Refining Operations, Wireless Networks (IEEE 802.15.4, ISA 100.11a)

Accomplished Engineer with 22 years significant design, construction and management experiences in Civil Engineering, and acted as Project Manager on a number of large projects. Led multidiscipline teams for a wide range of projects related to planning, preliminary design, detail design and construc

HSE, Logistics, Fire protection, Contractors administration, site Supervision.

with practical experience in HRM and Marketing & B.D. fields enhanced by theoretical MBA background. Well acquainted with HRM, organizational and marketing practices gathered within my career path. I also have an aptitude for learning and high level of adaptability

Process Flow Assurance Engineer

Mud Engineer in Shallow and Deep Wells as Spud Mud, Polymers, Lignite and Lignosulphonate, PAC, Lime Mud, C.M.C mud, Filtrate Loss Control, Glycerin mud, Inverse mud, GOE, Inverted mud, applied in onshore/ offshore operations, HPHT well.

Holding Ph. D degree in Hydrology, MSc in Geophysics, long term research experinece in groundwater as well as surface water hydrology such as; groundwater investigations, water quality assessment, groundwater monitoring, watershed modeling etc

20 years of experience

MS Geology; structural geology, prospect generation, basin analysis, petroleum systems, clastics, log analysis, field studies, Petrel, training, managment, recruiting

I have a lot of experience in drilling and drilling fluids.Desired position is Fluids Engineer onshore or Company Man onshore.

I have experience and skills in the following areas: Production Management, Quality Engineering, Project Management, and Purchasing

Good team player and a strong believer in teamwork and performance; Good verbal & written communication skills and a continuous improvement focus; Good facilitation skills, networking with industry professionals and performing presentations at workshops and seminars; Good leadership and mentorin

20 yrs of international reservoir engineer experience in evaluation, design, simulation, management and implement of oil and gas exploration and development projects in both E&P Companies and consulting firms

Would you please see my CV and references attached?

Free! Quality Management Specialist

an accomplished project manager, Chartered Engineer, with BSc, MSc, in mechanical engineering, holder of IMechE's Diploma in Engineering Management - (Project Management), extensive experience in design engineering, plant engineering, cost and scheduling, procurement, contract administration

21 yars in Oil and Gas Industry

Install, commissioning and Site Acceptance Test for Substation Control and Monitoring System (SICAM SAS): PROFIBUS FMS (fiber optic cables) protocol between Bay Control Units and Substation Controller

Adaptable, Versatile and highly experienced, Possessing excellent communication skilled at all levels, the propensity to empathize and get on well with people at all levels.Disciplined,Selfmotivated with the ability to motivate others, able to assimilate and retain information quickly, taking a po

Surveying Engineer/Survey Project Manager

I had a master degree in structural engineering from the University of Southern California.

Professional Maintenance and Integrity Manager

Quality Control Manager

20 years of proven success effectively managing maintenance, manufacturing, and production departments

30 years of process design and engineering experience with major EPC and Oil companies in Oil and Gas projects. I am Canadian citizen and a licensed professional engineer in Canada. Presently working with Jacobs Canada Inc as Process Director. Handled multibillion dollar projects.

Free! A forward-thinking, results-oriented TOP OIL AND GAS EXPLORATIONIST with international experience for major and independent oil and gas companies on new ventures and geophysical interpretation. Contributed to ten oil and four gas discoveries in Brazil, Indonesia, Ecuador, Argentina, and Gabon.

Energetic and result-focused professional with extensive project engineering and project management experience. A unique blend of engineering and oil and gas industry skills, including SAGD and CSS operations. Able to implement innovative ideas of problem solving and meet commitments with a customer

I am an experienced EIA and environmental management consultant with experience in mining, oil and gas and construction. I have worked in various countries (Kenya, PNG, Pakistan, Afghanistan, Botswana, Sri Lanka, & UK) & have been environment manager for construction of major dams in Laos & Egypt.

An extremely talented Power Plant chemist with huge background in operating and maintaining Water Treatment plant . boiler water treatment , Cooling water treatment , steam and water analysis, lube & fuel oil analysis , coal analysis , Effluent Treatments and Environmental monitoring

Over twenty years experience as process engineer working with ExxonMobil¡¦s Scanfiner, Phillips¡¦s Zsorb, Crude, FCC units, Hydrotreaters, BTX, Hydrocracker, Cogen, Delayed Coker, Ethylene Cracker Sulfolane and Reformer units. Possess two technical graduate degrees.

Chief structural

Project Manager - FEED - EPC - PMC - Oil/Gas

Cesar has over twenty four years experience as Electrical Engineer and seven years experience as a Control Engineer, having positions such as Regional Sales Manager, Field Engineer, Engineer Project Manager, Electrical Supervisor, System Integrator and Senior Controls Engineer.

Twenty five years experience as a Process Engineer in Chemical Engineering Industry. Specialized in equipment sizing, Simulation (HYSYS, VMG, Pro II, ChemCad), PFD and P&ID preparation, Optimization, Heat Integration, LDT, Pump Hydraulics, PSV and Control Valve sizing

CSWIP AUT/ASNT LEVEL III/AWS-SCWI INSPECTOR

As you will see from my resume I have spent the past 28 years working in drilling and production wells both on-shore and off-shore where I have gained considerable experience. I have strong leadership and organizational skills and a proven ability to manage and motivate a team.

Professsional Manager/ Group General Manager/Managing Director/ Management Consultant/ Chief Executive Officer

I am a Reservoir Engineer with extensive hands on reservoir, field development and management experience. I have worked with sandstone and carbonate reservoirs, EOR processes, risk analysis, reservoir analysis, field development and reservoir surveillance. I have considerable simulation experience.

Mechanical/Marine engineer with extensive exprience in operation, Repair, Construction, Commissioning and Maintenance in Marine, Petrochemical, offshore oil/gas and Wind power industry.

First 1 [ 2 ] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out