Resume - I have 12 years experience as Civil/Structural designer and my task includes pro...

Misco Jobs

Resume #86230

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE
(19 YEARS IN DETAILED ENGINEERING)

August 4, 2008 to July 23, 2009

Technip USA, INC
Claremont, CA 91711
USA

POSITION – Civil/Structural Designer

Has been involved in Civil/Structural Steel Design Drawing, Detailing and Modeling of Hydrogen Plant in projects listed below:

-220 MMSCFD HYDROGEN PLANT - SUNCOR VOYAGEUR PROJECT (SUNCOR) in FT. McMurry, Canada – August 2008 to February 2009

-58 MMSCFD HYDROGEN PLANT – DETROIT PROJECT in Detroit, Michigan, USA – March 2009 to July 2009

Dec. 2007 ~ May 2008

Onquest, Inc. / Lopez Associates and Engineers
180 E. Arrow Highway, San Dimas, Ca., 91773, USA

POSITION – Senior Civil/Structural Designer

Has been involved in Ducts drawing and Structural Steel Design Drawing & Detailing of Heater in projects listed below:

-COKER PLANT - GARYVILLE PROJECT in Louisiana, USA – Dec. 2007 to Feb. 2008

-COKER PLANT - DETROIT PROJECT in Detroit, USA – March. 2008 to May 2008

August 28, 2006 to November 30, 2007

Technip USA / IPS
Claremont, CA 91711
USA

POSITION – Civil/Structural Designer

Has been involved in Civil/Structural Steel Design Drawing, Detailing and Modeling of Hydrogen Plant in projects listed below:

-120 MMSCFD HYDROGEN PLANT – GARYVILLE PROJECT in Louisiana, USA – September 2007 to November 30 2007

-STEAM REFORMER (F-1201) - BM PROJECT (MITSUBISHI HEAVY INDUSTRIES LTD.) in Sungai Liang, Brunei – May 2007 to August 2007

-STEAM REFORMER (F-1201) - METOR EXP. PROJECT (MITSUBISHI HEAVY INDUSTRIES LTD.) in Jose Venezuela –
January 2007 to April 2007

-220 MMSCFD HYDROGEN PLANT - SUNCOR VOYAGEUR PROJECT (SUNCOR) in FT. McMurry, Canada – November 2006 to December 2006

-105 MMSCFD HYDROGEN PLANT - EDMONTON 2 PROJECT (AIR PRODUCTS) in Alberta Canada - August 28, 2006 to October 2006

March 11,1996 ~ August 15, 2006

JGC Phils. Inc. (formerly Technoserve International Co. Inc.) Alabang, Muntinlupa City, Metro Manila, Philippines

POSITION –Civil Designer II

Has been involved in Structural Steel Design Drawing, Detailing and Modeling in Oil and Gas projects listed below:

-HAWIYAH PROJECT in Saudi Arabia – JGC-December 2005 to July 2006 (Assign in Yokohama, Japan)

-RABIGH PROJECT in Saudi Arabia – JGC October to November 2005

-STEPAN PROJECT in Batangas, Philippines – September to November 2005

-DOLPHIN PROJECT in Qatar – October 2004 to October 2005

-IN AMENAS GAS PLANT PROJECT in Algeria - September 2003 to September 2004

-RIO TUBA & NICKLE BAY PROJECT in Palawan, Philippines - April 2003 to August 2003

-INSALAH GAS PLANT PROJECT in Algeria - August 2001 to March 2003

-MLNG-TIGA PROJECT in Bintulu, Malaysia - July 2000 to July 2001

-HLM PROJECT in USA - March 2000 to June 2000

-HAWIYAH GAS PLANT PROJECT in Saudi Arabia - November 1999 to February 2000

-TPU GAS PROJECT in TURKMENISTAN - January 1999 to October 1999

-PARCO REFINERY PROJECT Karachi, Pakistan - August 1998 to December 1998

-TPX ROJECT in Sriracha, Thailand - March 1998 to July 1998

-BPC PROJECT in Bataan, Philippines - January 1998 to February 1998

-RAS LAFFAN PROJECT in Qatar - July 1997 to December 1997

-SCIL PROJECT in Rizal, Philippines - April 1997 to June 1997

-BEF PROJECT in Rizal, Philippines - August 1996 to March 1997

-VIETNAM PROJECT in Vietnam - June 1996 to July 1996

-TMP PROJECT in Laguna, Philippines - March 1996 to May 1996
DUTIES AND RESPONSIBILITIES

-Prepare design drawing of Hydrogen Plants in all design area such as Ducts, Radiant Box, Penthouse, Convection modules, Stacks Support Structures and others including foundations and Piling drawing.
-Prepare model of UG facilities such as UG pipe, manholes, trench, duct banks and others in PDS (Plant Design System).
-Prepare three-dimensional (3D) model of structural steel such as Piperacks, Equipment structure, Misc. Platforms, Pipe Supports and Concrete structure and foundation in PDS (Plant Design System), FWP (Frame Works Plus) X-Steel (Tekla Structure).
-Prepare three-dimensional (3D) model of Ducting, Steel Framing, and support structure of Hydrogen plant in PDS (Plant Design System), FWP (Frame Works Plus) X-Steel (Tekla Structure).
-Prepare, check and review fabrication and erection drawings based on 3D structural models, design drawings, and standard drawings to ensure project specifications and requirements are satisfied.
-Acts as Lead Designer on small scale project.
-Responsible for preparing, reviewing, checking and verifying detailed civil/structural drawings of foundation, concrete and steel structures such as Piperacks, Equipment structure, Misc. Platforms, Pipe Supports particularly the complicated and special types of structures which requires special details, ensuring that project's and client's requirements are followed
-Review, checks clashing of steel structures and foundations and others structural model under/above ground with other discipline models like piping, raysways/cable rack and equipment under and above ground using PDS and SPR.
-Prepare, check and review overall underground layout using design information from different disciplines, foundation drawings, and/or underground information as basis.
-Prepare, check and review detailed design drawings of underground manholes, trenches, and pits to conform to customer specifications and accessories' requirements
-Prepare, check and review As-Built drawings based on field change sheets and specifications

August 1988- December 1995

ABB Electrical Industries Ltd.
Riyadh, K.S.A

Has been involved in Fabrication of metal sheets (Aluzinc, Black Iron) and Preparation of Assembly Drawing of Switchgears and Sub Station Housing.

POSITION - Jr Design Engineer

-Responsible in preparation of mechanical Design and shop drawing needed in the production and fabrication of low voltage Switchgear and Sub Station Housing.
-Provide technical support and assistance to Sales and Marketing department in preparing tender

POSITION - Design Technician/Draftsman

-Prepares front layout single line diagram and assembly drawings of Low Voltage Switchgear and Sub-Station.

-Responsible in ordering all mechanical part needed for the production of Low Voltage Switchgear and Sub-Station.

EDUCATION

BS in Civil Engineering
University of Pangasinan
Dagupan City
Philippines

SEMINARS AND TRAININGS ATTENDED

-PDS Basic Training October 16~23 2000, TIC Bldg. 1606 Trade St. Cor. Investment Dr. Madrigal Business Park, Ayala Alabang, Muntinlupa City, Philippines

-X-Steel basic and advance training for version 5.4 by TEKLA PTE Ltd., August 14~24, 2000, JPhil Bldg. 1606 Trade St. Cor. Investment Dr. Madrigal Business Park, Ayala Alabang, Muntinlupa City, Philippines

-X-Steel 6.0 Seminar for 3D Steel Detailers by TEKLA PTE Ltd. November 20 2000, Daungan Restaurant, Quezon City, Philippines

-AutoCAD R12 Basic Training ABB Electrical Industries Ltd. Training Center Riyadh K.S.A.

COMPUTER LITERACY

-MS Office Suite, MS Word, MS Excel

-PDS (Plant Design System)

-Frameworks Plus

-X-Steel

-MicroStation

-AutoCAD

-SPR (Smart Plant Review)

PERSONAL BACKGROUND

Date of Birth: June 6, 1965
Civil Status: Married
US Permanent Resident
Fluent in English and Filipino.
Exposed in working with ISO 9001 environment.
Resourceful, Analytical Thinker, Patient, Fast Learner.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 15488)

Go to Search Parameters...

Brief Description

Geological investigations, feasibility and acquisition study, surface and underground exploration, exploratory drilling end mine geology (open pit and underground), grade control

Experienced finance manager worked in Banking, Oil and Gas, Constructions and Oil Field Services Sectors

Having 16 years of experience in Petro Chemicals & Refineries, Gas Plants, Combined Gas/Steam Power Plants Construction well versed with ASME, API, AWS & Codes related to Unfired Pressure Vessels, Heat Exchangers, Plant Piping, Storage Vessels, Storage Tanks, SRU Piping, HPCL Plant T&I Works

Datamine software skill,Mine geology and mine manager

Experience in oil/gas well drilling/workover operations Land/Offshore Engineering/Drlg Supervision.

Highly motivated and experienced Maintenance Supervisor.

30 years experience in construction project managment. Proven track record of ensuring complex project is on time and on budget.

Graduate Electrical Engineer with over twenty-seven (27) years of hands on diversified oil field experience in Engineering / Projects / Maintenance / Risk - Reliability assessment /& Planning - CMMS,

25 years of experiance in drafting and design

An internationally experienced and successful as Electrical & Instrument Construction Installation,Detail Engineering,Maintenance,Testing, Commissioning of MCC,Switchgear,UPS, HT/LT Cables, Cathodic Protection System, DCS, ESD, PLC

Sr. piping designer

Install, modify, repair, and troubleshooting of electrical job as per customer requirements onshore/offshore. Valid BOSIET and H2S certificate.: Perform repair, troubleshooting, installation and commissioning of Naval Electrical and Electronics equipments. Included in those units are; IPMS, Rot

I am a Senior Instrument engineer with over twenty years’ experiences in engineering design, construction, commissioning and plant maintenance.

Providing structural, stratigraphic interpretation and characterization reservoir analysis services for

I am currently a Senior Technical Analysts iSeries, also as Data Base Administrator. I’m IBM Certified Specialist - System i Technical Solutions - Implementation (including i5/OS V5R4). Over 20 years of experience.

I have experienced as an Exploration Geologist from 1984-1992 and as a Wellsite / Operation Geologist from 1992- nowdays .

Senior Systems Engineer

I have experience in finance & accounting +/- 20 years at many type of business for Indonesian company and MNC

Progressing from general operator to senior operator panel operator senior technician to production shift supervisor to production supervisor.

Project Engineering Consultant providing twenty years of engineering and project management experience currently executing subsea controls systems projects for oil and gas equipment manufacturers.

Senior Quantity Surveyor with 21 years experience of Overseas and UK positions.

Construction Project manager

I have over 30 years in project controls, cost engineering area, split between Upstream and Downstream, Government areas.

Renewable, Alternative, Energy Development including multiple Biofuels

39 years of injection molding experience

B.Sc. & M.Sc, 18 years in oil industry as geophysicist, reservoir geophysicst, surveyor. Marine and land field experience, seismic processing and QC. Project management, personnel management. Technical sales and marketing. Worldwide including USA, Africa, Europe, Middle East, UKCS

M.E. + 18 years of experience + AWS CWI + NACE CIP -1 + API 510, 570 & 653 + ISO 9001 & OSHA 18001 Lead Auditor Training Courses

Geotechnical Engineering and Research and Development Manager

25+ years experience in project generation, development, and management; including over 14 years experience in international exploration office set-up, supervision, and project management.

Experienced in multidiscipline project engineering.

Senior Mechanical Equipment Engineer, 23 years in LNG, Oil, Gas and Petrochemical with Project Management, Commissioning and Maintenance/Reliability background for heavy gas turbines, compressors, turboexpanders as well as all associated mechanical, instruments,electrical equipment and safety system

I am a graduated, experienced, professional marine engineer. 29 plus years of valuable engineering hands-on experience in the Maritime and Offshore Industry.

I have 12 years experience as Civil/Structural designer and my task includes producing structural design dwg with connection details and 3d models. 7 years is in switchgear manufacturing where i was doing fabrication dwg of metal sheet and mounting base of switchgear & sub-station.

I HAVE 16 YEARS OF EXPERIENCE OUTOF IT 10 YEARS IN INDIA, 2 YEARS IN NIGERIA 1 YEAR IN DUBAI 4 YEARS IN D R CONGO IN THE POSITION OF SENIOR AND AS A FINANCIAL CONTROLLER

Very high administrative, Organizational and Negotiating Skills, B.Sc Business Administration, PGD Business Studies

A highly creative management system professional with more than Fifteen years of diverse experience in management systems like Quality Management Systems, Health and Safety Management Systems, Environmental Management Systems and Food Safety Management Systems

Experienced professional with 19 years experience both local and abroad as a Senior Quantity Surveyor / Contracts Manager having worked on multi faceted major projects–bridges, flyovers, roads/highways, reclamation, manufacturing facilities, assembly plants, school buildings, medium rise commercial

Having 11 years of UAE experience in international consulting , contracting companies in the field of civil, infrastructures, interested to advance my career to utilise my skills and strength

Sr.Instrumentation Er. Associated with Oil & Gas Operating Company and EPC Contractors/Consultants for 25 years in different positions as Design Engineer for various Conceptual, Front End Design & Engineering and EPC Projects. Worked in multi-engineering disciplines.

Provided leadership and direction to many FEED and EPCm Contracts worldwide. Acquired valuable experience in asset assurance management and team building (people management).

Senior Electrical/Mechanical Engineer withover 40years of experience involved with all aspects of mining and civil engineering tunnel drivage and excavations and mine planning and construction Diploma in electrical engineering MQB engineering certification

Drilling Supervisor with directional, horizontal experience .

Wellsite Completions Consultant

B.E.(Metallurgy) -GM(steel melt shop),-EAF/IF/LRF/CCM-30+years experience in steel melting shop

drilling supervisor experience in drilling operation 24 years, HP/HT 5500m/10000psi, Wells Vertical and horizonatl wells, and UBD

My experience and capabilities include assuming full P/L and operational responsibility for any business including strategic resources planning, staffing, developing marketing/sales strategies, setting finanical targets and operational KRA's, KPI's, in addition to promoting process improvements.

Petroleum Engineer with extensive experience as an engineer and manager of oil and gas operations in deep water, continental shelf and land exploration and production. Experience is both foreign and domestic with E&P companies and drilling contractor. Skilled and practical on site and office superv

Construction Executive Director/Senior Project Management

Accomplished senior technical geophysicist with 20 years of demonstrated success finding oil and gas through exploration and development drilling in Western Canada and Frontier areas.

electrical engineer Conceptual and detail Engineering, Prepare scoping study, conceptual study, FEED, detailed design, calculations, electrical bid documents, preparing material requisitions (MRs)

First 1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out