Resume - Fifty Years Total Experience in process engineering and technology development. ...

Misco Jobs

Resume #86532

CONTACT INFORMATION:
View contact information...

M.S., Chemical Engineering, Drexel Institute
B.S., Chemical Engineering, CCNY
Certificate, Business Administration, UCLA

Registered Professional Chemical Engineer, California
Member/Fellow, American Institute of Chemical Engineers
Emeritus Member, American Chemical Society

Fifty Years Total Experience in process engineering and technology development. Including More Than Twenty Years Process Engineering Experience on petroleum refinery, oil & gas production and petrochemical projects. Experience includes process simulation software Hysys/Pro II/Dynsim/Aspen (Distillation, Heat Transfer Trains, Hydraulics - conventional and advanced designs), Excel spreadsheet programs (Pinch, equipment, pump, compressor, line, valve, relief system, flare sizing and specification sheets), heat and material balances, PFDs and P&IDs.

Fields of Experience include petroleum refining, oil & gas production, petrochemical, gas processing, energy and water conservation, waste-to-energy and alternate fuel development projects.

2009 to Present: Proprietor of Samuel Woinsky Consulting. Solicitation and execution of various assignments in the following areas: process and cost engineering, process debottlenecking, pollution prevention, water and energy conservation, and technical marketing, sales and legal matters.

2006 - 2009 Bechtel: Major responsibilities have included:

My last Bechtel assignment was as a Process Engineer on an Exxon Mobil LNG Feed project doing resolution work relative to the differences between the client's and Bechtel's relief specifications, equipment datasheets, relief narratives/calcs/datasheets and PUD development.

My second Bechtel assignment was as the Process Engineering Lead for a section of a confidential new-technology project for Chevron. I managed up to four people and also was actively involved in producing work product myself. Issues were uncovered and numerous suggestions were made by my team. Many of our suggestions were accepted by the client. The work included IFA and IFD PFD development and H&MB, equipment datasheet and relief work (narratives, calcs and datasheets) relative to these PFDs. This work was done under strict client intellectual property protection rules.

My first Bechtel assignment was as a Process Engineer on the Motiva 350,000 BPD Port Arthur Refinery Crude Expansion Project (will be the largest U. S. refinery upon completion). Responsible for work on the new crude atmospheric and vacuum distillation units and crude preheat trains (performed rough Pinch analysis leading to symmetrical parallel crude preheat trains, heat exchanger data sheets, furnace margin analysis). Worked on process and control narratives for the new crude distillation units, saturated gas plan, delayed coker, naphtha hydrotreater, reformer and isomerization units. Worked on crude atmospheric and vacuum distillation units' relief PSFDs, narratives, calcs and data sheets.

Previous Work History:

2005 - 2006 Contract Process Engineer for Nana-Colt assigned to various process studies. Upstream oil & gas work included successful completion of two tight budget, tight schedule projects (recommended control and equipment changes to stop failures of existing progressive cavity pumps and provided conceptual process input to Cost Estimating for ultra low sulfur diesel storage and truck loading project), successful completion of a debottlenecking study for expansion of an oilfield (recommended piping and equipment additions vs extent of expansion), successful completion of dynamic simulation projects using Dynsim: (1) recommend valve and control changes to preventing production shut-downs when compressors fail, while not over pressuring the flare knockout drum have been implemented (to date, one plant shutdown has been avoided), (2) sized control valve to drive pig with gas to purge water line and not exceed 20 ft/sec, (3) determined control valve size and location for gas heating of a -50 deg F water line to avoid appreciable JT cooling of the pipe, and keep pipe temperature gradients low enough to avoid damaging the pipe supports, work on a number of pipeline pigging designs (new offshore/onshore facility, decommissioning of a NGL pipeline and installation of a temporary pig launcher for environmental compliance), and developed/presented a Dynsim training course.

2001 - 2006 Proprietor of Sam Woinsky Consulting. Solicitation and execution of various assignments in the following areas: process and cost engineering, process debottlenecking, pollution prevention, water and energy conservation [developed Excel programs (to estimate equipment efficiencies, utility and other operating costs, equipment and plant capital costs, and internal rates of return) for a book being written (about 90% complete) "Process Economic Analysis Made Easy"].

1997 - 2004 Chemical & Petroleum Program Manager for EPRI Chemicals, Petroleum & Natural Gas Center (on a contract and consulting basis) responsible for oil & gas production, petroleum refinery and petrochemical conceptual projects (thermal, water and hydrogen Pinch studies, advanced distillation studies and cogeneration, environmental and debottlenecking assessments). Personally developed and presented training courses ("Petroleum Refining Made Easy" and "Petrochemicals Production Made Easy") and, researched and wrote EPRI reports on Advanced Distillation and Water and Wastewater Management (includes expert process selection & water use minimization).

2001 - 2002 Contract Process Engineer for Foster Wheeler assigned to various process studies. Refinery work including analyzing an under performing crude/vacuum column crude preheat train (identified cause as off-spec operation due to OVHD corrosion problem, identified short-term improvements involving only minor repiping for upcoming winter operation, performed partial Pinch analysis and identified longer term preheat train solutions, performed dual condenser simulations to identify potential column modifications to increase OVHD temperature to solve the corrosion problem), simulation of a naphtha splitter to meet specs, a crude/vacuum column/coker heavier feed revamp conceptual study and a caustic carryover problem.

1993 - 1997 Director Strategic Product Development for ACS Industries' Separations Technology Division responsible for development of new products. Ultra-high capacity mist eliminator designs and computer expert equipment design systems for mist eliminators and valve trays were successfully developed.

1995 - 1995 Proprietor of Sam Woinsky Consulting. Solicitation and execution of various assignments including continuation of work for ACS, development of a conceptual first-of-a-kind process flow diagram, heat and material balance and economic analysis for a coal cleaning process, and Pollution prevention assessments at plants in former USSR republics.

1989 - 1993 Technology Development Manager for the M. W. Kellogg Company responsible for environmental, remote gas utilization and cumene/phenol technology development projects. A low residence time cumene-hydroperoxide to phenol/acetone reaction was developed, commercialized and licensed.

1987 - 1989 Manager of Technology Development for Kinetics Technology International (KTI) responsible for various technology development projects. Wrote winning proposal to DOE and managed the resulting successful execution of a brewery Pinch analysis.

1985 - 1987 Technical Project Manager and Advanced Technical Projects Adviser for Santa Fe Braun responsible for various projects including studies and pilot-plant work on an advanced thermal enhanced oil recovery project, and work on getting into the waste-to-energy business.

1982 - 1985 President and owner of Research Services Incorporated responsible for Solicitation and execution of various assignments related to technical sales and new technology development.

1977 - 1985 Part-time Lecturer for California State College, Long Beach California lecturing on process plant design, kinetics, fluid flow, process control, production economics.

1974 - 1982 Various positions for Occidental Petroleum's Occidental Research Corporation including Assistant to the President, Manager of Laboratory Projects Planning and Technical Recruiting, Senior Commercial Development Engineer and Contract Research Engineer.

1965 - 1974 Senior Research Engineer and Process Engineer for C. F. Braun assigned to equipment development pilot and semi-works research and writing design methods, and process design work on refinery, ammonia, ethylene and other projects.

1957 - 1965 Plant Technical Service and Development Engineer for Atlantic Richfield assigned to refinery studies and startups, and refinery and petrochemical bench and pilot process research projects.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9201 to 9250 of 15497)

Go to Search Parameters...

Brief Description

Former GS 15, U.S. Government Contract Officer (KO) & Administrative Contract Officer (ACO)¡Xcurrent Senior Level Professional seeking a Project/Program Management and or Business Development opportunity

Oil Drilling & Production (Quality-Inspection & Maintenance and Auditing)

Seeking a job position in the field of Instrumentation, with challenging opportunities to further enhance and optimize leadership and technical capabilities and to contribute to the success of my employer in my fullest interest and potential

Chemical Engineer with 7 years of experience in Chloralkali Plant and Caustic Concentration Flaking/Prilling Unit

I am currently a final year M.Sc. Student in Electrical Engineering Department, King Fahd University of Petroleum and Minerals (KFUPM). My graduation is expected by May 2003 and I will be available by July 2003.

BSC CHEMISTRY / DIPLOMA IN HSE + 02 YEARS EXPERIENCE

I am working in RALLIS INDIA LIMITED for 10 years in SAP SD ERP .

Mechanical Engineer - 20+ years maintenance experience in mining - both Underground & O/Cut. Also Processing Plant maintenance & Project Management on new Greenfields plants.

HSE Training,Risk Assessement,Management,Field Safety,Loss Prevention

Aws Cwi Welding Inspector / Ndt Inspector / QA-QC Inspector

CERTIFIED IN HEAVY EQUIPMENT OPERATION, EXPERIENCED LABOR WORKER, KNOWLEDGE OF SAFETY AND TRAINED IN MSHAW, CPR CERTIFIED,CUSTOMER SERVICE SKILLS, ETC.

Implementing the health and safety plan. Daily Tool-Box talks prior to commencement of work. Inductions of new staff members on site. Ensuring that every team member wears PPE equipment and that it is worn correctly. Specified to each projects’ requirements.

Working on following systems:- *FMC smith flow meters, accuload loading pre-set batch contllores, *Rosemount saab tank radar system. *Enraf additive injector system. *MSA gas monitoring system{ suprema ,9010,9020 etc}.

Level 1 OGPO looking for work in northeastern B.C.

LAND SURVEYOR

Seventeen years experience in electrical engineering design, construction supervision, commissioning & start-up for major international EPC and Consulting firms specialized in power generation, T & D grids, oil and gas petrochemical fields

Expert Contracts and Business Development Manager with more than 20 years of experience with major oil/gas operators in the Middle East and exposure to Contracts Management from start till award and post award, establishing new ventues in drilling, engineering and related fields, & procurement.i

1.2 years of Experience as a Piping Engineer, 2 Year of Experience in PDS Modeling

I am a Controls and Instrumentation engineer from Pakistan. I have 3 year experience

Project Controller with extensive experience of implementation and operation of project management systems. Detailed knowledge of C/SCSC & EVM systems. Experience in Petro-Chem, Oil & Gas downstream distribution, Rail, Defence and Civil Engineering sectors. Extensive procurement experience.

Reservoir Engineer

I graduated from Bandung Institute of Technology (ITB) majoring Chemical Engineering on March 2004 with GPA 2,92. I have experiences as a chemical tanker chartering team and process engineer.

Qualification: B. Sc. Hons Biotechnology

I have confident, good communication skill, able to adapt to new environment very fast.

B.Tech (APE) University of Petroleum and Energy Studies, Dehradun (2005-2009) CGPA:-2.98/6 (till 6th sem)

I Am Computer Engineer And I would like to go in Automation field

Summary of Qualifications,Combined experience in Industrial Refrigeration Technician / Electrician Technician in the Pharmaceutical Industry,Petro chemistry, Building Management System (BMS), Ship Systems, Maintenance and Troubleshooting.

I am Mine Surveyor with more than five years experience in the Zimbabwean mining industry. I established survey offices at Sino-Zimbabwe Cement Company and Murowa Diamonds being the first permanent employed surveyor at the Mines. I have experience in Surpac, AutoCad and Vulcan mining softwares.

Design engineer

Previously employed to Rusal (Guyana) as a Planning Manager

Off Shore Work

I am a National Diploma graduate in Emergency Medical Care (N.DIP EMC) from the University of Johannesburg (previously Technikon Witwatersrand).

Analyze, resolve, and log all issues by email, phone, and face-face sessions with the agent. Reviewed recorded calls between the agent and clients to insure quality support. Encourage and motivate the agents to take advantage of training available through Shell. Identify & resolved issues.

Fresh electronics and instrumentation engineering graduate with good academic records.

I have exp. 16 months as fire&safty supervisor, 18 months as a electrical technician

25+ yrs progressive exp. as a Sr. Supervisory Planning/Scheduling & Project Control Engr/Mngr with Risk/Contracts Exp, Int'l w/Utilities, EPC Firms/Consultants, Turnkey OEMs and Constructors within the Energy Sector. P3 Ver.3.1, Primavera P3e/cVer.5, 6.2,Pertmaster, Claim Digger, MS Office, Acrobat

Fifty Years Total Experience in process engineering and technology development. Including More Than Twenty Years Process Engineering Experience on petroleum refinery, oil & gas production and petrochemical projects. Experience includes process simulation software Hysys/Pro II/Dynsim/Aspen.

D10 dozer, 637 push-poll scraper, Loaders, Crusher, Track-hoe, Blade, ect. Maintain equipment, water lines, sewer lines, house pads, Road construction, Airport construction, GPS. ect...

Petroleum Geologist with 20 years international experience

The majority of my 15 years of experience has been applied to inspecting in-service pressure equipment and piping in a refinery setting. I am an excellent communicator with exceptional organizational skills geared toward inspection, NDE planning and crew leadership.

Exploration Geologist with 10 years of diversified experience

stat engineer (oil and gas exploration) , drilling rig move fishing

Pro/ENGINEER, AutoCAD, SAS, Microsoft Office, MSC NASTRAN

A Mechanical Engineer with over 11 years of proven functional experience and can perform various roles in Manufacturing, Programming ,Design and Materials Procurement / Material Management.

MSc GEOLOGY, RESEARCH WORK IN ELECTRICAL RESISTIVITY METHOD IN GEOPHYSICS FIELD

B.E.(Chemical), 6 years of experience in offhsore oil and gas platform of which 3 years in control room.

Over 9 years experience in Instrumentation & control in Chemical, Power, Cement, Sugar & Petrochemical industry

I have worked in Pre-Commissioning, Commissioning, Normal running Plants. In India and Abroad, both places I have worked. I have worked in Chemical, Fertilizer and oil and gas industry

Production with safety

Chief Engineer (Manager) in Technical Office for a large construction progect :High Rise building, Under ground Metro line, Industrial projects, Preparing and checking structural shop drawings with B.B.S., Coordination, Methods for constructions, using ISO 9000 - 2000 Prep. of Claims and V.O etc.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 [ 185 ] 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out