Resume - Over than 9 year experience joint in Oil & Gas industrial. Specialize on inspect...

Misco Jobs

Resume #86593

CONTACT INFORMATION:
View contact information...

Experience of designation

1) QC Inspection Engineer.
2) Structure & Piping Inspector.
3) Sub Sea Wellhead and Equipment & pipe line Inspector.

Personal detail
Date of Birth: 9-8-1982
Citizenship: Malaysian.
Religion: Muslim
Gender: Male
Marital status: Married.
Language: fluent speaking in English, Malaysian, Indonesian, Chinese (mandarin)
Writing: English, Malaysian

Available:
Need company sponsorship if job in oversea.
1 month notice period, offer letter and agreement.
Available working long term if job duration in oversea onshore, (Asia, Middle East, Europe)
Working in Malaysia and (Oversea permanent & contract, depend family package, and contract agreement).
Salary: Can negotiated depend (location, job duration, country and family package).
Contact: mazri.abdullah@yahoo.com

Self introduction

Over than 9 year experience joint in Oil & Gas industrial. Specialize on inspection, testing and documentation for fabrication, installation structure and piping work for offshore Jacket structure and pile make up, process & living quarters offshore platform, FPSO piping process and floating system, sub sea inspection equipment and wellhead, Familiar with AWS D1.1, ASME B 31.1&B31.3, API 1104,API 16 D & API 16 A Specification, knowledgeable about metallurgy metal content, shock growth decay element, mechanical testing for material behavior content, strength, toughness, corrosion entrapment and avoided. Graduation Master Degree due online study program scheme, recognized from (IAAOU) international institutional accreditation online university. Also have knowledge about Welding & Non Destructive Test (NDT) testing method, knowledgeable for CSWIP 3.1 Welding Inspector, CSWIP level II Magnetic Practical Testing (MPI), and CSWIP level II Dye penetrate Testing (DPI)

Personal Education

1) Master Degree of science in Metallurgy & Mining Engineering, Belford University, Texas United State
Reference online no: RV445011
CGPA: 3.84
2) Certification of attend CSWIP 3.1 Welding Inspector Personal level II.
Serial Cert no: 07/WIS5/KL/1113
3) Certification of attend CSWIP level II Magnetic Testing.
Serial Cert no: 04/NDT30MT/CIDB/007
4) Certification of attend CSWIP level II Liquid Penetrate Testing.
Serial Cert no: 04/NDT30PT/CIDB/007
5) NIOSH-OSFAM Oil & Gas Safety passport for offshore and onshore job, still valid until 3/11/2010

Other course

AWS D1.1 (structure welding) specification, internal conduct by CIDB-TWI Johor Malaysia
API 1104 (Pipeline welding design) specification, internal conduct by CIDB-TWI Johor Malaysia
API 16A & API 16 D conduct internal course by FMC Sub Sea Wellhead & Equipment International Company.
Basic and introduction for Ultrasonic testing, internal conduct by CIDB-TWI Johor Malaysia

List of experience Project involves:-

1. May 2009 until now
Project: NCP Structure Pipe Rack.
Client: National Chevron Philip.
Fabrication Company: JGC Cooperation.

Daily duties & work responsibility.
* To make sure that any activity offered for inspection has an approved shop Drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) must follow code, standard specification.
* Carry out all site inspections as per the intervention points marked in the relevant ITP.
* All site inspection shall be carried out vide an official Inspection and Test request (ITR).
* Closely monitor site activities to ensure quality of work is in compliance with shop drawings and contract requirements, good construction practice and only approved materials are used.
* Performs inspections of an advanced, more complex nature in addition to providing day-to-day work direction, as required for the inspection of new, existing, or vendor's facilities assuring that materials are correct for the intended service and work performed conforms to engineering specifications
* Monitoring and check all specification welding and fabrication as per requirement, specification, design and daily status QC inspection report.

2. September 2008 to may 2009
Project: Ruby turret offshore
Client: SBM International
Fabrication Company: MMHE Engineering Sdn Bhd
Daily duties & work responsibility.
* To make sure that any activity offered for inspection has an approved shop Drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) must follow code, standard specification.
* Carry out all site inspections as per the intervention points marked in the relevant ITP.
* Monitoring and check all specification welding and fabrication as per requirement, specification, design and daily status QC inspection report.
*Witness when welder's during WQT and insure must following WPS requirement as per standard and codes specification.
*Spot witness and check daily NDT status and reporting, review calibration certificated for NDT equipment.

3. April 2008 to August 2008
Project: B 11K-A Jacket
Client: Sarawak Shell Berhad (M) Sdn Bhd
Fabrication Company: MMHE Engineering Sdn Bhd
Daily duties & work responsibility.
* To make sure that any activity offered for inspection has an approved shop Drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) must follow code, standard specification.
*Witness when welder's during WQT and insure must following WPS requirement as per standard and codes specification.
*Spot witness and check daily NDT status and reporting, review calibration certificated for NDT equipment.

4. July 2007 to March 2008
Project: Gumusut Sub Sea Wellhead Water Injection
Client: Shell International Limited
Fabrication Company: FMC Sub Sea International
Daily duties & work responsibility.
* To make sure that any activity offered for inspection has an approved shop Drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) must follow code, standard specification.
* Carry out all site inspections as per the intervention points marked in the relevant ITP.

5. May 2006 to June 2007
Project: Qatar Petroleum Jacket
Client: Qatar Petroleum Limited
Fabrication Company: Sime Darby Engineering Sdn Bhd
Daily duties & work responsibility.
* To make sure that any activity offered for inspection has an approved shop Drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) must follow code, standard specification.
facilities assuring that materials are correct for the intended service and work performed conforms to engineering specifications

6. August 2005 to May 2006
Project: Sumandak-A Jacket
Client: PETRONAS Carigali Malaysia
Fabrication Company: Sime Darby Engineering Sdn Bhd
Daily duties & work responsibility.
* Performs inspections of an advanced, more complex nature in addition to providing day-to-day work direction, as required for the inspection of new, existing, or vendor's facilities assuring that materials are correct for the intended service and work performed conforms to engineering specifications
* Monitoring and check all specification welding and fabrication as per requirement, specification, design and daily status QC inspection report.
*Witness when welder's during WQT and insure must following WPS requirement as per standard and codes specification.
*Spot witness and check daily NDT status and reporting, review calibration certificated for NDT equipment.

7. March 2005 to August 2005
Project: D-1 Wellhead & Water Injection Platform Top Side
Client: Engineering India Limited
Fabrication Company: Sime Darby Engineering Sdn Bhd
Daily duties & work responsibility.
* To make sure that any activity offered for inspection has an approved shop Drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) must follow code, standard specification.
* Carry out all site inspections as per the intervention points marked in the relevant ITP.
* All site inspection shall be carried out vide an official Inspection and Test request (ITR).

8. Sept 2004 to Feb 2005
Project: Bongkot Jacket
Client: total Thailand.
Fabrication Place Company: Sime Darby Engineering Sdn Bhd
Daily duties & work responsibility.
* To make sure that any activity offered for inspection has an approved shop Drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) must follow code, standard specification.
* Carry out all site inspections as per the intervention points marked in the relevant ITP.
* Monitoring and check all specification welding and fabrication as per requirement, specification, design and daily status QC inspection report.
*Witness when welder's during WQT and insure must following WPS requirement as per standard and codes specification.
*Spot witness and check daily NDT status and reporting, review calibration certificated for NDT equipment.

9. Feb 2004 to May 2004
Project: Irong Barat Jacket & Tipod
Client: Exxon Mobil (M) Sdn Bhd
Fabrication Company: Sime Darby Engineering Sdn Bhd
Daily duties & work responsibility.
* Performs inspections of an advanced, more complex nature in addition to providing day-to-day work direction, as required for the inspection of new, existing, or vendor's facilities assuring that materials are correct for the intended service and work performed conforms to engineering specifications

10. November 2003 to Jan 2004
Project: Guntung F Jacket
Client: Exxon mobil (M) sdn bhd
Fabrication Company: Sime Darby Engineering Sdn Bhd
Daily duties & work responsibility.
* To make sure that any activity offered for inspection has an approved shop Drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) must follow code, standard specification.
* Carry out all site inspections as per the intervention points marked in the relevant ITP.

11. Sept 2003 to Oct 2003
Project: Yoho YP Jacket
Client: Saipem Nigeria Limited
Fabrication Company: Sime Darby Engineering Sdn Bhd
Daily duties & work responsibility.
* To make sure that any activity offered for inspection has an approved shop Drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) must follow code, standard specification.
* Carry out all site inspections as per the intervention points marked in the relevant ITP.
12. July 2003 to August 2003
Project: Yoho ZBA Jacket
Client: Saipem Nigeria Limited
Fabrication Company: Sime Darby Engineering Sdn Bhd
Daily duties & work responsibility.
* To make sure that any activity offered for inspection has an approved shop Drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) must follow code, standard specification.
* Carry out all site inspections as per the intervention points marked in the relevant ITP.
* All site inspection shall be carried out vide an official Inspection and Test request (ITR).
* Performs inspections of an advanced, more complex nature in addition to providing day-to-day work direction, as required for the inspection of new, existing, or vendor's facilities assuring that materials are correct for the intended service and work performed conforms to engineering specifications
* Monitoring and check all specification welding and fabrication as per requirement, specification, design and daily status QC inspection report.
*Witness when welder's during WQT and insure must following WPS requirement as per standard and codes specification.

13. April 2003 to June 2003
Project: Yoho ZB Jacket
Client: Saipem Nigeria Limited
Fabrication Company: Sime Darby Engineering Sdn Bhd
Daily duties & work responsibility.
* To make sure that any activity offered for inspection has an approved shop Drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) must follow code, standard specification.
* Carry out all site inspections as per the intervention points marked in the relevant ITP.
*Witness when welder's during WQT and insure must following WPS requirement as per standard and codes specification.
*Spot witness and check daily NDT status and reporting, review calibration certificated for NDT equipment.

14. August 2002 to July 2003
Project: Kinarut Ewac Topside
Client: PETRONAS Carigali Malaysia
Main contractor: Ramunia Fabricator
Fabrication Company: Menara Bersatu Engineering Sdn Bhd
Daily duties & work responsibility.
* All site inspection shall be carried out vide an official Inspection and Test request (ITR).
* Closely monitor site activities to ensure quality of work is in compliance with shop drawings and contract requirements, good construction practice and only approved materials are used.
facilities assuring that materials are correct for the intended service and work performed conforms to engineering specifications
* Monitoring and check all specification welding and fabrication as per requirement, specification, design and daily status QC inspection report.

15. June 2001 June 2002
Project: Balal PLQ Jacket
Client: Total Fina Elf
Main contractor: Sime Darby engineering Sdn Bhd
Fabrication Company: Richcall Engineering Sdn Bhd
Daily duties & work responsibility.
* To make sure that any activity offered for inspection has an approved shop Drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP) must follow code, standard specification.
* Carry out all site inspections as per the intervention points marked in the relevant ITP.
* All site inspection shall be carried out vide an official Inspection and Test request (ITR).
* Monitoring and check all specification welding and fabrication as per requirement, specification, design and daily status QC inspection report.
*Witness when welder's during WQT and insure must following WPS requirement as per standard and codes specification.
*Spot witness and check daily NDT status and reporting, review calibration certificated for NDT equipment.

16. Sept 2000 to may 2001
Project: Angsi A & B Jacket
Client: PETRONAS Carigali (M) Sdn Bhd
Main contractor: Sime Darby Engineering Sdn Bhd
Fabrication Company: Haven Engineering Sdn Bhd
Daily duties & work responsibility.
* Closely monitor site activities to ensure quality of work is in compliance with shop drawings and contract requirements, good construction practice and only approved materials are used.
* Performs inspections of an advanced, more complex nature in addition to providing day-to-day work direction, as required for the inspection of new, existing, or vendor's facilities assuring that materials are correct for the intended service and work performed conforms to engineering specifications
*Spot witness and check daily NDT status and reporting, review calibration certificated for NDT equipment.

Reference contact Person:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2051 to 2100 of 15497)

Go to Search Parameters...

Brief Description

ELCTRICAL ENGINEERE

Level 4 scheduling in oil&gas with Primavera

Continuous scaffolding job for more than twenty (20) years in the field of construction, Petro. Chemical Plant and Oil & Gas Industry.

I am a mathematics post graduate alongwith apprentice training in refiney technology. I have choosen refinery tech. as career. Approximately 17 years in Petroleum and Petrochemical industry working as a Plant Manager/superintendent/shift controller/ Supervisor / Operator including 13 year on ovseas.

Electrical & Instrumentation Inspector - Broad experience in E&I installation in Fabrication of Offshore Production Platform, FPSO, D.P Cable Laying Vessel and Oil & Gas Refinery Plant. (Knowledgeable in industry standard recommended practice: NEC 500, IEC/NEC 505, API RP14C, 14F.

Instrument engineer

I am an experienced AutoCAD operator / draftsman with expertise on mechanical, structural, civil and electrical drawings, using Autocad 2009. I have eleven years of extensive hands-on work experience in a manufacturing as well as construction set-up.

Barge Anchor Operator, Rigging, Scaffolding Foreman offshore, Crane driver 100t and Tower.

To Carried out overhauling, repairing preventive, corrective breakdown, and shutdown mechanical maintenance, trouble shooting, condition monitoring, alignments, hydro testing, of rotating & static equipments, like pumps, compressors, fin fans blowers, heat exchangers, column, and using all type of

I have worked more than 12 years in Oil & Gas, Refinery, Petrochemical industry as a field operator and DCS & SLPC control panel operation at off-shore & On-shore.

18 years experience in Gas- Petrochemical industries as sr. Technician, assistant shift supervisor, etc

My strengths are my ability to take charge and work well within a team environment and in my experience in developing algorithms from concept phase to commercial implementation

Read blue prints, electrical scymatics, troubleshooting and repairing electronic devices for the industrial sector and wireless communications equipment.

Information Management, Data Management and CAD Systems Management

Over than 9 year experience joint in Oil & Gas industrial. Specialize on inspection, testing and documentation for fabrication, installation structure and piping work for offshore Jacket structure and pile make up, process & living quarters offshore platform, FPSO piping process and floating system,

A professional Mining Engineer with 15 years experience in mine ventilation

I have vast experience in the Safety related field.

20 years experience in the Instrument & Controls through to Information Management arena

I am an experienced engineer with productive employment and education in the field of processing, supervision, commissioning, start-up operations, production and design.

Nimr'C' Full field water injection project.

Installation of electrical pipe,electrical wiring,electrical controls,electrical panel board.Installation of main over current protection,lightings,switches.Banking of transformers and splcing of wires.Installation of A.C. electric motors,magnetic contactor.Installation AHU,ACU,FCU,colling tower

10+ years of combined professional experience utilizing geophysical interpretation, seismic processing, single stack and simultaneous deterministic inversion, 3D geo-cellular modeling, software consulting, training, and development skills. Working knowledge of 3D interpretation techniques, etc.

I am an experienced senior geologist aged 36 and I believe your company offers the right opportunity for my development into senior management. I hold a Bachelor of Science Degree from the University of Zimbabwe, which I obtained in 1994. I also hold a Certificate in Mineral Resources and Geological

SDE with very good experience in very demanding working environment; person self-motivated, performance driven, team player, with good IT skills. Experience in FSU and Eastern Europe. Bilingual Spanish– English, with basic conversational knowledge of Russian.

 Project Management; Demand Forecasting; Simulation & Analysis Packages/Models

Mechanical Engineer & a result oriented professional with qualitative experience of over 13 years in Cost Estimation, Planning & scheduling and Cost Control in the EPCM & EPIC projects of Offshore and Onshore Oil & Gas, Port & LNG Terminal and Petrochemical plants in Nigeria, India and Middle East

I am a professional Mechanical Engineer with 20 years Gulf experience with MEP services in building construction..

PROFILE:A Piping/mechanical superintendent with 13 years experience in the petrochemical & construction industries in Middle East. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives. First-class analytical, design and problem solving skills. Good

Wellsite Geologist

CAD Specialist-Designer

Environmental Professional with 10 years experience is looking for a managing position in Oil&Gas industry

a challenging and responsible position in Purchasing, Procurement & Supply Chain Management utilizing experience gained in Domestic operations and multinational Projects.

23 years of sales experience including positions as a sales representative, sales trainer and sales manager. I work very well with the public. I know how to close the client and get the answer I am looking for.

High school and some collge . worked offshore jack up rig and onshore rigs in oman , Dubai , Abu Dhabi, Kuwait and recently work in Saudi Arab

Master Mariner, Offshore FPSO Marine Supervisor

Qualification : Diploma in Technology - Mechanical Gas – 1999 to 2001 School of Professional & Continuing Education ( SPACE ) University Technology of Malaysia. Gas Engineering Supervisor Certificate in Natural Gas - 2002( Lisence No. : 00027 ) Certified by Malaysia Energy Commission – ST ( IP )

Geophysicist with 30 years of experience in aeromagnetic surveys, Remote Sensing and GIS data analysis for geological mapping ,mineral ,oil exploration ,geo engineering and geo environmental projects. I also possess knowledge of “KingdomSuite” ,“Geosoft” packages and FORTRAN,C,C++. Interested in ch

Sr. Petroleum Management Engineer with extensive diverse experience in Light to Heavy Oil, Oil Shale, Tar Sands, Reservoir, Completions, Production, Drilling, Well Completions/Simulations and Facilities Engineering, and in Offshore, Deepwater, SURF (Subsea, Umbilical, Risers, Flowlines), Terminals,

Free! Nearly 30 years of significant, progressive experience directing teams to successful completion in onshore and offshore drilling.

Welding Technologies, Technical assistance, Workshop, site, AutoCAD, Tekla Structures, XSteel, SolidWorks, MS Project

Started carrier with Operations and later switched over to projects. For the last 17 years employed as a safety professional mainly in the Petroleum/ Petrochemical field. Expert in carrying out Safety audits/ HAZOP studies and QRA.

Over 28 years professional experience IT and SAP SECURITY

Looking for a long term contract or permanent challenging position worldwide, utilizing broad - based experience in projects maintenance– Maintenance manager, Supervisor, Team leader – Air Traffic Control, Industrial projects, Telecommunications.

I offer over twenty-five years of Sales and Sales Management experience, as well as domestic and international Marketing. Through out my career I have demonstrated the ability to provide companies with professional and high volume producing sales teams as well as building strong customer relations.

Geoscience expertise from progressively increasing career responsibilities. Management expertise from progressively increasing career responsibilities. Please see resume for details.

Multiple Industrial Construction Projects involving new Fossil Power Generation, and Petrochemical Process facilities; Routine seasonal turnaround or shutdown schedules for oil and gas production, oil refining, fossil gas & coal fired power generation plants; Environmental – Remediation projects;

Masters in automotive engineering

Senior Hydrogeologist

Master in Metallurgical Engineering. Experience in manufacturing management, operations, quality assurance, and production; and in managing and implementation of ISO 9002 certification. Fluent in Spanish and English.

Formal studies in civil engineering, information systems, business management and project management have provided me with extensive technical and financial expertise together with proven planning, coordination and control skills.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 [ 42 ] 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out