Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #86596 next resume »»
CONTACT INFORMATION:
View contact information...

Classifications: Licensed Journeyman Electrician of Oklahoma- Lic# 64828
Licensed Journeyman Electrician of Colorado- Lic# 13526
Licensed Journeyman Electrician of Wyoming- Lic# J-17270
Licensed Journeyman Electrician of Utah- Lic# 7061058-5504
Licensed NCCER - Lic# 463642
Certificate NFPA 70E
OSHA Certification, for 10hrs.
MSHA Certification
US Passport

Certifications: Rough terrain forklift, Scissor lift, Boom lift, CPR and first aid training.
Backhoe (case, john deer)

Years of experience: 28 years. Industrial 80%, Commercial 15%, Residential 5%

Education: High School @ Charles Page, Sand Springs, Ok
College @ OSU Technical school, Okmulgee, Ok
ABC @ Tulsa, Ok
IEC @ Tulsa, Ok

References:
Jeff Edwards, Electrician, 918-697-8444
Dan Brown, Electrical Contractor, 918-437-8423
Rick, Construction Contractor, 918-284-7618
Jack Hill, Construction Contractor, 501-831-1946
Erick Fausett, Electrician, 918-812-0718
Jim Lewis, Electrical Contractor, 918-317-2403
Ronnie Raines, Electrical Contractor, 972-272-5595
Jimmy Strawn, Field supervisor, 214-9261364
George Karanaoff, Field Supervisor, 432-894-6699

Employment History:

KBR, Houston, Tx

Job Type: Army Electrical support, Iraq
Position: Journeyman Electrician
From 1/09 to Present
Rate: $21.63hr.
Work performed: electrical up keep on panels, army barrages, generatered
Electrical systems and back up systems.

T I C, Steamboat, Co. ( Climax mine Project- Mine Closed down)
719-395-8932

Job Type: Surface Mine
Position: Journeyman Electrician
From: 11-3-08 to 11-08
Rate: $28.00 hr
Work Performed: Installation of electrical equipment, pull wire, terminate

Hettinger Welding, Big Piney, Wy
307-276-4170

Job Type: Compressor Station
Position: Journeyman Electrician
From: 10-02-08 to 10-27-08
Rate: $30.00hr
Work Performed: Install conduit, terminate wire of all sizes, Controls

Unity Electric, Seattle, WA (Olivian Project)
206-940-3236

Job Type: Commercial
Position: Journeyman Electrician
From: 8-5-08 to 10-08
Rate: $32.00hr.
Work Performed: Working on high-rise Condos, Installing Panels, running
Mc and terminations

Utah Valley Electric, Salt Lake City, Ut
801-294-2602

Job Type: Commercial
Position: Journeyman Electrician
From: 7/14/08 to 7-29-08
Rate: 30.00hr.
Work Performed: Working on commercial buildings (motels and condos)
Terminations, installation of electrical equipment, terminations, installing
New service, running backhoe.

Hettinger Welding Electrical Division, Big Piney, Wy
307-276-4170

Job Type: Compressor Station
Position: Journeyman Electrician
From: 6-2-08 to 7-1-08
Rate: 30.00 hr.
Work Preformed: Installation of Electrical equipment, High Voltage
Terminations, Transformers, conduit rigid, and controls

Sea-Tac Electric, Seattle, Wa. ( Safeway Project)

Job Type: Commercial
Position: Foreman
From 3-24-08 to 5-30-08
Rate: 33.00hr.
Work Preformed: Planning and layout of job, order material as needed,

Saulsbury Electric, Odessa, Tx ( Cortez, Co. Kinder Morgan Job )
432-366-3686

Job Type: Compressor Station
Position: Foreman / Journeyman Electrician
From 1-08 To 3-19-2008
Rate: $27.00 hr.
Work Preformed: Planning and layout of job. Assign tasks. Go over prints,
Loop drawings, interconnect drawings. Over see the Terminations of stress
Cones. For MCC gear.

I C A T S, Broken Arrow, Ok (Rawlins, Wy Sinclair Project)
918-494-0969

Job Type: Oil Refinery
Position: Journeyman Electrician
From: Nov, 07 to 1-08
Rate: $32.00hr.
Work Preformed: Instrument Tech., Installation of conduit, cable tray,
Terminations of controls,

MMR, Batrouge,La. (Tulsa,ok Sinclair Project)
615-631-9577

Job Type: Oil Refinery
Position: Journeyman Electrician
From: 11-07 to 6-08
Rate of Pay: $20.00hr.
Work Preformed: Installation of Conduit, Terminations of controls and High
Voltage wires. Trouble shoot systems out. Read blueprints and carry jobs out.

ISC, Batrouge, La. ( Meeker, Co. Project and Opal, Wy Project)
225-756-8001

Job Type: Compressor Station
Position: Journeyman Electrician / Foreman/Instrument tech.
From: 2-07 to 4-07 (personal reasons at home) From 8-07 to 11-07
Rate of pay: $30.00hr.
Work preformed: Plan and layout, over see job, order material, time sheets.
Also terminated control wires as a tech.

Triad Electrical, Batrouge, La. ( Valliant, OK Project)
225-927-8921

Job Type: Paper Mill
Position: Journeyman Electrician/Instrument tech.
From 7-06 to 1-07
Rate of pay: $26.00hr.
Work preformed: Controls terminations, High voltage terminations,

MMR Group, Batrouge, La. ( Tulsa, OK job)
615-631-9577

Job Type: Oil refinery
Position: Journeyman Electrician/Foreman
From 12-05 to 7-06
Rate of pay: $20.00hr.
Work preformed: Installation of conduit ( rigid ), pull wire, pull thermal
Couple wire, fiber optics, terminations of all panels, and motors.

Colburn Electric, Broken Arrow, Ok ( Catoosa,OK job )
918-251-8765

Job Type: Commercial/ Industrial
Position: Journeyman Electrician
From 10-05 to 12-05
Rate of pay: $21.00hr.
Work Preformed: Installation of panels, distribution equipment and
Terminations.

Field Electric, Stillwater, Ok ( Stillwater, OK job )
405-372-5413

Job Type: School add on
Position: Job foreman and Journeyman
From 7-05 to 10-5.
Rate of pay: $21.00hr.
Work performed: Assigning task, keeping materials ordered as needed,
And attending weekly meetings.

Double R Electric, Garland, Tx. ( Mc Clester, OK and Fredricksburg, TX )
972-272-5595

Job Type: Commercial
Position: Job Superintendent
From 11-04 to 7-05
Rate of pay: $25.00hr.
Work Preformed: Assign tasks, go over jobs with foremans, hiring as needed for jobs require, attending weekly meetings,

TIC, Steamboat Springs, Co. ( Denver, CO. job )
970-879-2561

Job Type: Oil refinery
Position: Journeyman Electrician
From 9-04 to 11-04
Rate of pay: $20.00hr.
Work Preformed: Installation of conduit, panels, switchgear, pull wire,
Terminations of high voltage switchgear and low voltage.

W.W. Enterprises inc., Muskogee, Ok ( Catoosa, OK and Kansas job )
918-681-2100

Job Type: Dams in Kansas (Security Equipment)
Position: Journeyman Electrician
From 3-04 to 8-04
Rate of pay: $20.00hr.
Work preformed: Installation of electrical equipment, raeways, pull wire,
And terminations of main switchgear and panels.

Central Electric Co., Tulsa, Ok
918-437-8423

Position: Journeyman Electrician and Job foreman
Work preformed: Installation of electrical equipment, raceways, pull wire, and service work.
I also run jobs with this company, from small commercial to large jobs.

Colburn Electric, Broken Arrow, Ok
918-251-8765

Position: Journeyman Electrician and Job superintendent
From 9-02 to 10-03
Rate of pay: $21.00hr.
Work preformed: Installation of equipment, raceways, pull wire, and
Service work.
I also run jobs on the Lowe's project.

Oil Capital Electric, LLC., Tulsa, Ok
918-317-3255

Position: Journeyman Electrician and Foreman
From 7-98 to 8-02
Work preformed: Installation of electrical equipment, raceways, pull wire,
And terminations. I also foreman at Williams tower in Tulsa, Ok
Under superintendent Ron Biffus.

Electrical equipment associated with:

Main switch gear, disconnects from 30a. to 1200a., transformers, generators,
ATS gear, UPS systems, switches.

Tools for the job: Hand benders, electric benders, auto benders, meters, meggers.

Material used: Rigid, robroy, emt, pvc, explosion prove boxes and seal offs.

I am currently working in Iraq, if you would please contact me thru my website.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 7601 to 7650 of 15512)Go to Search Parameters...
Brief Description
I offer extensive experience in construction and heavy industry in a wide range of roles and positions with a detailed theoretical and practical working knowledge of the following that I have developed over the previous 22 years of my career as both an OHS&E Professional and a team leader.
Communication, teaching, presentation, problem solving/analysis, organisation, Diplomacy, software programming and mechanical design, high level general IT.
I am Electronics & Communication grad from India with more than 3 years of experience in Electrical & Instrumentation.I have through knowledge of SAP PM module.
Experienced Landman seeking a challenging work environment
BACKGROUND SUMMARY Over 10 years of experience in Piping, Structural, Mechanical, and Civil with experience in 3D modeling, CADWORX and drafting and designing refinery foundations.
Three years experience as an engineering tech, 10 years experience with data manipulation.
Inspection and laying of PE gas line in Mumbai for Mahanagar Gas Ltd (MGL) and Inspection of painting and coating of steel structures in offshore.
I am a geology masters student at Baylor University (May 2009 graduation). My training has included all of the basic geological branches with focus on sequence stratigraphy, depositional systems (both carbonate and clastic), and isotope geochemistry.
During 19 years, I have gained some practical field experiences & knowledge as a construction civil engineer/ manager which includes, projects construction supervision, project management, quality control, coordination & liaison in the project team, field survey
electrical/mechanical maintenance supervisor
Snubbing / Workover Supervisor, Field Technician.
I am seeking employment on construction/shutdown projects as a QA/QC inspector or planner.
Mechanical Cement & Power plant Projects Installation, Commissioning & Maintenance
I am 38 years old, good health and have 12 years solid experience on project management for several types of large, complex and fast track International projects.
Working Offshore as an engineer and mechanic for 15 years
PDS Piping designer Engineer
Sr. Technical Assistant in Soil & Water testing lab atleast `15years experience
PLANNING ENGINEER: Liaison with Client, Consultant, Sub-contractors and Internal departments to get complete information on assignments for further instructions to Project Engineers. Conduct daily planning/production meetings with Site Manager/Project Engineers for discussing critical activities
Process Engineer in Refinery, Oil&Gas and Petrochemical Industries
Construction Mgr.- Piping Eng.
Senior Electrical Control Eng. / PLC Programmer / Scada System Specialist
Senior Construction/ Field Engineer/Superintendent with HND Mechanical Engineering and a member of the institute of incorporated engineers. I have 15 years of experience in Construction management in various roles and locations around the world, working for major EPC contractors.
I have a diploma in mining engineering with 1st class manager's certificate, and15 years of experience in opencast mining operations. Skills like active role in mine production planning, cost control, inventory management ,equipment productivity, team-building & training, statutory requirement.
Relay Protection coordination (by Captor software); motor starting, load flow, fault studies by ETAP software; DBs and MCCs selection; AFD selection and implementation; Frame6 power generation commisioning and maintenance; Switchgears up 110 kV commisioning and maintenance.
v A First class (60%) Bachelor of Chemical (B.E.) engineering graduate from Poona university in 1992, having a total (Cryogenic Air Separation/LNG Terminal & Regasification Unit /Refinery/Petrochemicals) industrial work experience of ~ 12 years.
5 Yrs plus experience in overseas construction project in Singapore
aws cawi
Mining engineer
PDS administration, Complete project setup and support on multiple large scale projects using PDS 7.2, 7.1,7.0 and 6.4 Microstation J/SE, PDS Piping specifications and RDB Support, Isogen setup and support, INTools support, SmartPlant Review Administration, and other 2D and 3D CAD tools.
M.Tech in Mining Engineering,having about 4 year mining experience in production and planning, Knowledge of 12D Model Software.· Received environmental training in Environmental Requirements,Integration of Reclamation & Mine Planning , Received Safety Training in Mine Safety Programs, Philosophy ,
Engineering / Construction Mgmt – Over 25 years combined experience supporting large domestic & international project assignments in both Home Office & Field locations. Business lines include Mining & Metals, Nuclear Power, Nuclear Waste Handling, & Refinery / Chemical (Oil / Gas, & Hydrogen) Plants
Industrial Journeyman Electrician-28 years
I have 18 years experience in the Oil Service Industry, involved in all aspects of Coiled Tubing, Nitrogen Services, Fluid Pumping, N2/He Leaktesting(HLD), Pipeline Pigging/Testing & Well Testing. My last permanent position was Service Supervisor II for Halliburton Coiled Tubing in Australia. Since
Experienced Senior Civil/Structural Designer with mostly Petro-Chem background
B.E in E.C.E with 2.5 yrs of exp as Desktop admin and 2.5 Yrs of system admin
Present Bachelor of Petroleum and Natural Gas Engineering (Designing counstruction and exploitation of oil and gas pipelines,piping and storage facilities faculty )
Rotating Equipment Engineer
Experienced (11 years) General Manager, Plant Manager, Maintenance Manager, H&S Manager
Chemical engineering degree in oil&gas field, experiance at project engineer and vice-project manager, control project, cost stimate, coordinate engineering desceplin, etc.
Senior technician instrument
I would like to announce my availability to any professional company in need of a Senior HSE Officer with an Engineering and Medical Degree. My vast experience and capabilities and the ability to get along with people will prove to be an asset to the company, client and workers. As a professional,
Linux, Ansoft designer, Auto CAD, C++ and Microsoft Office
MECHANICAL ENGINEER & QUALIFIED ASNT LEVEL II IN UT.RT,PT & MPT....
litigation lawyer
Welding inspector
Lease Acquisition
Dear Sir, I believe that I have the capabilities and the experience that enable me to match the requirements of this job. I have had a considerable experience in many companies and many domains.
disiel mec h with experience trucks;earthmoving and hydroluics
Seeking challenging assignments as PDS Structural Designer and Senior Draughtsman with a reputed organisation in the Construction Industry.Based on my skills in Civil/Structural Designer Using Application PDS, SPR, AutoCAD, Microstation, I am confident that I would be a great addition to your team.
Apply for post of Electronics and Instrumentation engineering
First   Prev   151   152   [ 153 ]   154   155   156   157   158   159   160   161   162   163   164   165   166   167   168   169   170   171   172   173   174   175   176   177   178   179   180   181   182   183   184   185   186   187   188   189   190   191   192   193   194   195   196   197   198   199   200   Next   Last
Seach Parameters

Goto Advanced Search...
Keywords: (e.g. mining engineer)Find results with:
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com