Resume - I worked in Aker Shipyards Braila in Hull Design Department as ship designer. I ...

Misco Jobs

Resume #86601

CONTACT INFORMATION:
View contact information...

Birth date and place September, 06.09.1968, Buzau, Romania
Nationality Romanian
Sex Male

Education
2006 Tribon M2-M3 CAD course at ICEPRONAV Galati - lines fairing module
2002 Tribon VMS CAD course at ICEPRONAV Galati - lines fairing module
2001 AutoCAD course– authorized user by Autodesk Romania Branch
2001 Draft Survey Inspector–Romanian Maritime Training Institute - Constanta
2000 IMO courses- Romanian Maritime Training Institute - Constanta
- Prevention and Fighting Marine Pollution from Ships
- Fire Prevention and Firefighting aboard Ships
1996 „Dunarea de Jos" University - Galati
- License diploma – section: Shipbuilding and naval equipment
1986 High school „Nicolae Iorga" – Braila

Professional experience

2007 – Self Employed - Ship Structure Designer
I provide technical design services to ship and boat owners, builders and repairers
I undertake ship hull scantling calculations for tugboats, pushers, pontoons and produce a full set of hull scantling plans ready for Romanian Naval Authority (class approval). Drawings include structural sections, profile, decks and shell expansion plans, everything it needs to gain structural approval and to develop working drawings.
I have produced General Arrangement drawings for a wide variety of ship and boat types
I also provide lines fairing, hull generation and hull variation.
Projects I have been involved in include:

- converting tugboats in pusher-tugboats
- motor boat L=16.3 m; 215HP
- pontoons and landings pontoon
- tank calibration(tank strapping)

I collaborated with Schifswerft Ebert GmbH (German company) for following inland vessels projects:

- Tank motor barge – 4560 m3
- Motor ship-push barge – 192+204 TUE (quantity of container)
- Motor ship barge – 332 TUE
- Tank motor barge – 3000 m3
- Tank motor barge – 1510 m3
For these projects I provided technical documentation, hull structure drawings, arrangement and accommodation drawings, 3D body lines drawing, welding table, shell expansion, scantling calculations in accordance with GL or BV rules.
The projects have been Germanischer Lloyd and Bureau Veritas supervision.
Designed and approval technical documentation for Anchors Pool N Standard (385, 500, 850, 1000, 1200) [kg].
- Kinematics' motion study
- CoG determination and welding calculation.

2002 – 2007 AKER Yards Braila
Naval engineer and Ship Structure Designer at Hull Design Department, responsible for lines fairing and curve modelling on several projects: research vessels, dredgers, supply vessels, RO-RO, container vessels, etc. Beginning with October 2003 I was also responsible for maintaining of different project, as system manager.
- Solved technical revisions
- Technical support for various problems
- IT Support and maintain CAD software
- Design and supervise of Hull construction technical drawings for Class approval.
- Preparing production information
- Solved technical revisions

2001 –2002 SANAB Yards Braila
Naval engineer and Ship Structure Designer at Hull Design Department, working with AutoCAD system, involved in making of the workshop drawings for arctic trawlers, supply vessels, cargo vessels, barges and tank vessels.
- 3D modeling of ship structures
- CAD support for various problems

1999 – 2001 S.C. Navrom S.A. Constanta
Fifth Engineer.
Embarked on 8500 tdw cargo vessel.
Maintenance and repairs of ship aggregates and installations: main engine, diesel generator, pumps, etc.

1999 – 1999 - S.C. ROMNAV S.A. Braila
Manager of Fleet Department, responsible for operating the fleet of 13 tug boats and 52 barges, along Romanian Danube Sector. I was responsible for the activity of approx. 100 men. Liaised with Harbor Master's Office and Romanian Naval Authority.

1996 – 1999 – S.C. ROMNAV S.A. Braila
Dispatcher and surveyor responsible with following up the process of repairing the vessels operated by the company, both hull repairs and main engine or main systems repairing works performed by different contractors.

Technical skills and competences
- Experienced in manage Windows System, network, Cad software
- Knowledge of standard welding procedure
- Knowledge of standard marine engineering procedure in structural detailing (IACS STANDARD)
- Working with Class Rules and guidelines and theirs computer programs

Computer knowledge

AutoCAD, RhinoMarine, Tribon Lines Fairing, Surface/Compartment, Curve Hull Modelling – modules, Microsoft Office package – very good
FastShip, Strand7 (Straus7 – European version), Propcad, Propexpert -good

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1401 to 1450 of 15472)

Go to Search Parameters...

Brief Description

I am currently working as Principle Process Specialist for Worley Parsons MEG, Calgary. I have more than twenty-four (24) years of experience in process design, conceptual studies and operations, for oil and gas projects (both onshore and offshore), petroleum refineries and petrochemical complexes.

I have over 20 years of hands-on experience in the information technology industry with the last 5 years spent managing a staff of 50+ Project Managers, programmers, analysts, Oracle DBAs with an annual budget of over $10 million.

Land Manager / Land Administrator

B.Eng, Traffic and Transportation Planning and engineering, local area traffic management, transportation modelling, sidra, transyt, trips, bus transit, light rail route and station planning

Environmental Microbiologist Phycologist

Chemical Engineer with 16 years petrochemical and commissioninig experience

Maintenance & Operations, Commissioning & Testing of Power Plant H.F.O and Gas Based ,Mining equipment, CAT Equipment / Resource Management

I have a PhD in Rock Mechanics and Rock Engineering and have practical experiences in both mining and civil engineering. I am very competent in numerical methods in geomechanics.

CSWIP Senior Welding Inspector BG Grade 2 Painting Inspector NDT ASNT Level 2

Using Eclipse Simulator for history match and prediction of oil and gas reservoirs.

Reservoir Engineer,18 years of experience from Condensate to Heavy oil fields, over 4300 hours of intensive petroleum training. Extensive experience as Integrated Team Leader. Extensive experience with Single and Multilateral Horizontal wells in Heavy Oil field. Simulation, planning experience.

Having more than 14 years experience in Welding Inspections, , construction, fabrication, installation, commissioning in QA/QC Multidiscipline field as TPI or clients representative of Major Projects in the heavy construction industry including, onshore & offshore. Petrochemicals Facilities, Fertili

Tertiary Qualification in HSE disciplines,15 years Oil & Gas and Mining Industry and Exploration experience at senior,Supervision of safety functions in an operational environment. Implementation and on going development of the Site Health and Safety Management Plan..

11 yrs Experience in Construction - Inspection Fields

23 years oil and gas experience. 10 years experiecne as HSE Advisor / RSTC

I am interested in working for the company as Maintenance Superintendent/Manager.

Traffic Engineer with Master of Technology degree in Transportation Engineering. I have about 11 years of technical and project management experience in UAE, Qatar, India, Sudan and Saudi Arabia, in the area of traffic and transportation engineering/planning;

Production Supervisor

Seeking to find a challenging position in the oil and gas industry as a Gas Plant Operator within a company that offers me the possibility to use my experience to best serve the needs of the company, improve its bottom line profitability and efficiency. Over 22 Years of Experience

Advanced Certified Interconnect Designer. Trade Radio Technician. Diploma Electronics Eng. CID & CID+ Training. 17 years experience in both Comercial and Defence (Aus) Specialising In High Speed Digital, RF, Analogue and Video Board Design using Altium Software.

Electrician

25 years expereinced project manager / construction manager, project cost control, pipeline and facilities, expereinced in pipeline inspection, facility inspection, non destructive techniques, ASME and CSA. Expereinced in Gas and Oil, responsibility groups of 70 or more inspectors / construction

diploma in chemical technology

I am diploma in Chemical Engineering. I have more than 25 years of experience as a process field and panel operator.

Fitter and a Maintenance Supervisor.

Piping design and gernal 3D model design using AutoCAD and CADWorx. Conduct reviews for Design Engineers and Field Engineers with Navis software. Direct drafters in preparation of drawings and plans. Coordinate drawings with other design agencies, fabrication and construction.

I am a Kentucky certified miner, mine foreman, electrician and electrical instructor.

Currently I am Mechanical Technician in the oilfields in Sudan also have many years of experience as maintenance supervisor.

Electroplating and running chemical an run test on them and check qc on parts

PDMS Structural Designer Offshore Experience

CFS-CV

NDT level III, Senior certified welding inspector, experienced in most industries

I am a traveling supt. looking for someone to utilize my skills. I am an excellent problem solver and work well under pressure.

I worked in Aker Shipyards Braila in Hull Design Department as ship designer. I was involved in several projects on making of hull structure drawings, workshop drawings, lines faring for different types of maritime vessels built in shipyards: cargo vessels, supply vessels, RO-RO, container vessels,

Free! 20 years experience in Control Systems design and drafting. Industries include: Refining, Petrochemicals, Pharmaceuticals, and Brewery. Working knowledge of AutoCad MicroStation, Microsoft Excel & Access, PDS modeling, SmartPlant P&ID, SmartPlant Instrumentation (INtools) and SmartPlant 3D.

Hungarian chief rig mechanic with 30 years experience

Dynamic, energetic, results oriented, Geologist/Technologist with extensive supervisory and field experience seeks a technical/management position in a progressive thinking mineral resources organization.

My career objective is to become an integral part of a team involved in oil and gas exploration where I can use my problem solving skills and creative abilities to meet challenges and contribute to a dynamic organization.

Results oriented engineering professional with 20 years experience in project management, process engineering, and facility engineering

Experienced Materials coordinator

HSE manager . qualfication . diploma of HSE engineer , osha qualified

A diversified and experienced individual seeking opportunity in mechanical engineering / management support or related field.

Planning of all the activities of Major and Minor inspection of conventional steam turbine of various capacities from shut down to start up and over speed testing.

development of process flow diagram (PFD) and P&IDs, equipment sizing & preparation of datasheet, heat and material balance, simulation on HYSYS, process improvement, Hazop Reviews, line hydraulics, debottleknecking to improve plant performance, commissioning and pre-commissioning activities.

Honest, hard working, tenacious employee

Experienced Manager, and an effective leader with excellent interpersonal skills and flair for creativity, with the ability to work to strict deadlines. Adaptable, good sense of humour that enjoys a challenge and enhancing peoples potential using communication skills at all levels.

Fabrication , construction , in-service inspection , repair, alteration and rating activities for pressure vessels , pressure relieving devices , steel storage tanks built to API 510, ASME section VIII div 1,

Over 13 yrs exp in OD/HR/OB engagements, executive coaching/mentoring, leadership development. currently working as Principal consultant with Infosys leadership system, Infosys tech ltd (Nasdaq:INFY).

B.E.-Chemical with 9 years of Commissioning and Operation Experience in Ammonia Plants; 6 years of Project Management experience & 4 years of Process Engineering experience in Fertiliser Project

Directing Large Engineering Teams.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 [ 29 ] 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out