Resume - Sr. Piping Design Engineer

Misco Jobs

Resume #86706

CONTACT INFORMATION:
View contact information...

M.S Bachelor of Engineering (Industrial and
Production), Mysore University, 1994 -66.2 %
2nd stage, Born on 16Th Jan 1972

Objective: Opportunity to apply my Engineering and Piping Design skills to fulfill company needs and as well as enhance my Engineering skills.

Career Profile:

Around Ten months of on job experience-PDMS modules such as Admin/Design in M/s Plant Design Engineers Sdn Bhd, Kuala Lumpur, Malaysia and applied Quality check, Piping Model Design skills.

Around Three years of on job experience-PDMS modules such as Admin/Design/Draft in M/s Indus Integrated Technologies and applied Piping model Design skills.

Around 21 months of Engineering Design experience in M/s Hindustan Aeronautics Limited. Applied Computer Aided Design Skills.

Over Three and half years of Material Planning and Control experience in M/s Hindustan Aeronautics Limited. Applied Computer and Engineering skills and have reduced Non_Moving Inventory of our project by 50%.

Over Four and half years of professional engineering experience in the automotive equipment industry. Applied computer and engineering skills and have increased the company profits and productivity by 25%.

Professional experience:

Senior PDMS Application Engineer: for M/s Plant Design Engineers Sdn Bhd, KL, Malaysia
(Jul 2008 - Apr 2009)

Company Profile:

Plant Design Engineers is a privately held limited liability company operating in Malaysia as Valley Pacific Sdn Bhd since 1999. Established by industry professionals with extensive experience to provide specialist services to the Oil & Gas and Petrochemicals industries in the Asia Pacific region.

PROJECT: BLACKTIP DEVELOPMENT ONSHORE GAS PLANT
CLIENT: Eni AUSTRALIA B.V
DESIGN TOOL: PDMS11.6 SP4, AutoCAD 2007
SCOPE OF WORK: Modeling of the new facilities like Slug Catcher, Fire Water Storage & Flare Knockout pipe routing, Extraction of piping isometric drawings and Bill of Materials for 3 modules ¡* On shore Gas Plant¡¨.
Providing Tie in points and as well as determine Tee locations of utility lines on rack to connect each module.

Senior PDMS Application Engineer: for M/s Indus Integrated Technologies, Bangalore, India
(Oct 2005 - Jun 2008)

Company Profile:

Indus Integrated Technologies is providing High-end Engineering services to Power, Process, Onshore & Offshore Oil & Gas, Petroleum Refinery, Pharmaceutical and Chemical industries. Our mission is to provide inexpensive and accurate design services quickly and efficiently to our clients.

Confidential # 1
PROJECT: 80 MW POWER GENERATION PLANT
CLIENT: OPG POWER GENERATION PVT LTD. INDIA (ANSALDO)
DESIGN TOOL: PDMS11.6, AutoCAD 2007
SCOPE OF WORK: Modeling of structure which supports Boiler drum and pressure parts, routing of
Internal and External Piping and extract isometrics and Layout drawings.

PROJECT: GROUP SEPARATOR SKID
CLIENT: OCCIDENTAL MUKHAIZNA LLC, SULTANATE OF OMAN
DESIGN TOOL: PDMS11.5, AutoCAD 2007
SCOPE OF WORK: Modeling of the skid with Structural, Equipment and Piping and extract isometrics and
Layout drawings.

PROJECT: MODIFICATION OF PALM GRAM WITH ADDITIONAL MODULES FOR PALM
OIL REFINARY PLANT
CLIENT: ESTROL, MALAYSIA
DESIGN TOOL: PDMS11.5, AutoCAD 2007
SCOPE OF WORK: Modeling of the new facilities like Refinery and Reactor division in existing refinery, pipe routing, extraction of piping isometric drawings and Bill of Materials.

PROJECT: FPSO TOPSIDES CONVERSION FOR THE OKORO-SETU NIGERIAN
OILFIELDS
CLIENT: BUMI ARMADA BERHAD, KUALA LUMPUR, MALAYSIA.
DESIGN TOOL: PDMS11.5, AutoCAD 2007
SCOPE OF WORK: Modeling of the new facilities like Raiser Porch, Pig Receiver, New Test Separator, Gas lift Compressor & Fuel Gas System, pipe routing, extraction of piping isometric drawings and Bill of Materials for 5 modules onboard a ¡* Floating Production Storage & Offloading¡¨ vessel.

PROJECT: ¡* BOX¡¨ TYPE BOILER 200MW POWER PLANT
CLIENT: INDIAN OIL CORPORATION LIMITED, INDIA (ANSALDO)
DESIGN TOOL: PDMS11.5, AutoCAD 2007
SCOPE OF WORK: Modeling of all External Piping and extract isometrics and Layout drawings.

Over All Piping Responsibilities:

„Ï Creation of new project in PDMS
„Ï Creation of component catalogue w.r.t PMS as per ASME Codes and upload to PDMS.
„Ï Creation of 3D models of Structure, Equipment and Pipe routing as per piping guidelines.
„Ï Extraction of Isometric and General Arrangement drawing
„Ï Checking of Isometrics with Line List, PMS, Pipe support Details, Holds List & Back checking with P&ID.
„Ï Co-ordination with the Structural, Equipment, Process & Piping Departments for appropriate input/ modification drawings.
„Ï Modification of model as per necessary changes.
„Ï Co-ordination with the client for inputs/ clarifications.
„Ï Delivery of output data with in the scheduled time.

ACHIEVEMENT: Traveled Malaysia worked on site collected lot of information to execute project and found new tie-in for existing lines of FPSO. Trained four employees of Ansaldo
Caldaie, Trichy on PDMS simultaneously worked on Power plant project. Explored importing of 2D & 3D AutoCAD, STADD PRO and SACS model to PDMS & made structural model making easy and time save.

CAD Engineer: for M/s Hindustan Aeronautics Limited, Engine Division, Bangalore _
(Jan 2004 - Sep 2005 on Contract Basis)

Company Profile:

Hindustan Aeronautics Limited incorporates in 1940, comes under administrative control of Ministry of Defense. Today HAL is under Department of Defense Production and Supplies. It is engaged in Design and development, Manufacture and Overhaul of Fighter planes, Trainers, Choopers, Passenger Aircraft's and Marine engine. Currently it is fulfilling the needs of Air Force and Navy.
Confidential # 2
Project: Solid Modeling of Aircraft components. The project aims at modeling of Aircraft parts.

PROJECT: PTAE (PILOT LESS TARGET AIRCRAFT ENGINE)
AIRCRAFT: LAKSHYA
COMPONENTS: AIR INTAKE CASING, DIFFUSER CASING, TURBINE DISC, AND
UNIT EXHAUST CONE,
DESIGN TOOL: UNI-GRAPHICS V-18

PROJECT: AMAGB (AIR CRAFT MOUNT ACCESSORY GEAR BOX)
AIRCRAFT: KAVERI.
COMPT. NAME: MAIN CASING AND COVER CASING.
DESIGN TOOL: UNI-GRAPHICS V-18

All These models were done for easy analyzing and various operations of manufacturing.

As a designer, I am responsible for creation of parametric solid models of Aircraft parts using guidelines as per drawing. And creation of Drafting and Assembly Drawings. Delivery of output data with in the scheduled time.

Material Planning and Controller: for M/s Hindustan Aeronautics Limited, Engine Division, Bangalore
(July 2000 - Dec 2003 on Contract Basis)

Project: Garrett Engine - installed to Dornier Aircraft

Responsibilities:

„Ï Generated Vendor Data Bank.
„Ï Ensured where the business need is best satisfied by the use of supplier.
„Ï Defined suppliers, the parts they can supply, prices and lead-time.
„Ï Kept track of approved suppliers and their contracts.
„Ï Negotiated price with the supplier.
„Ï Analyzed various vendors on quality, time line and price, parameters.
„Ï Made Material Purchase Request as and when Material requirement exists.
„Ï Processed requisition, RFQ, Quotes, purchase Orders and Purchase schedule.
„Ï Maintained data like Annual Consumption, Stock Balance, Dues etc., in our system using FoxPro.
„Ï Generated Annual Review Sheets to find Net Requirement of Materials using FoxPro.
„Ï Integrated planning so the right items are purchased at the right time.
„Ï Streamlined all necessary Materials, Components and Assemblies.
„Ï Monitored the procured materials receiving reports & material requisition process to eliminate the possibility of non-confirming material entering the core value stream.
„Ï Generated various status reports of specific orders or vendors.
„Ï Generated reports like pending purchase orders, material to be returned, cost analyses.
„Ï Provided the ability to analyze purchase history for future negotiations and purchase control.
„Ï Controlled the valuable inventory.

Sales and Service Engineer: for M/s Sri Ram's CarbonCleaning Center, Bangalore,
(March 1996 - June 2000)

Company Profile:

Sri Ram's Carbon Cleaning Center, distributors for Carbon clean range of products manufactured by M/s Morovac Technologies Inc. USA & Auto Gas Equipment's manufactured by M/s Landi, Italy. The Company has an enviable range of products for 2-Stroke engines to 4-Stroke engines. The company mission is to provide & protect public health & ecological resources through effective reduction of air pollutants.

Responsibilities:

„Ï Collaborated with Motorvac technologies, USA and improved the organization and promotion of the CarbonCleaning systems in India.
„Ï Installed and serviced more than 15,000 CarbonCleaning systems to a small and medium sized vehicles and reduced the environmental pollution.

Confidential # 3
„Ï In short span, succeeded in build up the company's brand image.
„Ï Controlled and monitored the marketing and sales of these systems and reached all monthly targets.
„Ï Initiated dealership outlet at Chikkamagalore.
„Ï Trained many employees to install the cleaning systems.
„Ï Generated monthly reports, which helped the company to find soft spots and take appropriate measures to improve sales.
„Ï Streamlined the installation process and achieved higher customer satisfaction.

Special Skills:

„Ï Leadership
„Ï High Technical Knowledge.

Computer Skills:

I did Auto CAD R-14 in 1995 at LCC to update my Engineering Design skills.
Did C, C++ and Basic Java courses in 2000 at Tata Infotech to develop programming language skills
Used Microsoft Developer Studio for compiling C, C++ programming languages and J Builder for compiling Java programs
Did Unigraphics V-18 in 2003 to enhance my Engineering Design skills.
Did PDMS11.5 in 2005 at Indus Integrated Technologies to fulfill needs of industry.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5701 to 5750 of 15507)

Go to Search Parameters...

Brief Description

ACS800,ACS550,ACS600,ACS1000(all ABB),DCS500,DCS800(both ABB),Drive Window, Winder Soft, IGSS7.0, PL7PRO, UNITY XL,FieldBus,HART,BrainTCP/IP,DH+,DNP,MODBUS

With regard to CAD capabilities, I have over 2 years experience in the following software: Microstation PDS EERACEWAY (3D Raceway Modeling) PDS DRAW (Drawing Manager), PDS PDS-EQUIP (3D Equipment Modeling), Microstation Java 7.1, Orthogen/PDS, AutoCad

40hr hazwoper, Confined Space Entry, Underground Storage Tanks, Industrail Hygeine, Industrail Safety, Lead Abatement, Lead Superviser

Lease Records Administrator with 14 years related business experience in the oil and gas industry.

Experianced Offshore Rigger,Ab seaman,200t captain with USA work Visa

Sr. Piping Design Engineer

Possessed sound knowledge of reservoir simulation and high proficiency in use of reservoir engineering softwares such as Eclipse, Saphir,Peep,Mbal. Possessed an integrated knowledge of well test design and interpretations.

Marine Civil Construction Supervisor

Experienced instrumentation technician able to handle loop-check, termination, calibration of field instruments and devices

Cathodic Protetion Design,ECDA Survey,Soil Resisitivity

I have 17 years of working experience on road construction and mining both hard rock and alluvial

A result oriented professional with proven abilities in plant Electrical & control system. Preventive & Breakdown Maintenance in the field of Oil & Gas and Petrochemical Industry. Installation, Maintenance & Trouble shooting of Electric drives, HT & LT Switchgears & Protection Relays, Control Panels

MULTI SKILLED PLANT OPRATOR

Comprehensive problem solving abilities, good verbal and written communication skills, Ability to deal with people diplomatically, willingness to learn, Team facilitator.

Bachelor of Science of Electrical Engineer, Drafting Aide Certificate AutoCAD 2009, CAD Operator Certificate AutoCAD 2009, Member of Phi Theta Kappa International Honor Society, Member of National Technical Honor Society, Dean List for 2008-2009

To secure a position that will maximize my talent and expose me to the new challenges, as well as satisfaction in my immediate environment through hard work and professionalism

I am a strong team player with proven experience contributing in cross-functional teams to fulfill corporate goals, who communicates well both verbally and in written form, who shares his ideas and knowledge with others, who develops excellent working relationships to his co-workers and customers.

Experienced in wind data analysis, wind flow modeling and loads calculation using softwares like Wind Pro, WAsP, WAsP Engineering, Wind Farmer and other supporting software¡¦s like AutoCAD, Map Source, Surfer and Global Mapper.

PRIMAVERA PLANNER, PROJECT PLANNING &MONITORING ,RESOURCE (MANPOWER,PLANT,MATERIAL),PREPARED RECOVERY PLAN ETC.

Drilling Engineer

Expertise in working with PFD's and P&ID's, Process Design Calculations and Process Simulators

Two years of experience in Process / Facility Engineering

Project Management, Problem ID/Solving, Report Generation and Data Management.

Stores Executive, SAP working invironment, Diploma in Mechanical Engineering, Graduate Diploma in Materials Management

Knowledgeable in Hazard Identification and Risk Assessment.

HSE

Design Engineer with experience in 3D modelling and Stress Analysis

A highly motivated young engineer with proficient skills in ECLIPSE and Petrel RE, with great mind of problem solving, and with great personality in team work

Mapping of geology and structures, Preparation and assessment of geological repots, Exploration program processes, Ore reserve estimation, Sample selection and preparation for analysis, Quality Control, Liasoning work with DMG & IBM offices.

Myself M.Tech in Naval Architecture seeking a responsible position in offshor eengineering. My area of interest is the structural analysis, fluid structure interaction, hydrodynamics, subsea pipelines analysis..

Metallurgical Accounting, Budgting, Flotation, CIP process,Gravity Concentration, Smelting, Elution, Dump Retreatment, SHE issues management, Mentoring trainees

Mechanical Engineer with hands on pit time, ready to relocate. Employeed as Maintenance Supervisor on a Surface Coal Mine. Dragline/Shovel Experience.

Piping Engineer

MSc. in petroleum geology, University of Tehran

Drilling Technician

IT specialist, professionally qualified in Management and Computers(M.B.A Information Systems, Masters degree in Computers) with 10 years of proven hands-on experience in Computer System Analysis, System Support, System Administration, Networking, Database development and management.

19 yrs of hard rock mining experience (ie: copper, gold) as well as diamond mining. Will adapt to most enviroments and willing to work overseas; will reply to all responses. Sincerley Stu Hogg

A seasoned subsea systems engineer with a detailed understanding of trees, controls and manifolds from front end feasibility and conceptualisation to offshore installation and commissioning.

Procurement, Expediting, Material Control, Supplier Surveillance, Supply Chain Management

Senior Structural Designer/Construction Support Specialist

Construction Engineer

qualified in six modules of different aspects of corrosion,and the confidence gained throughout the years while running my own consultancy

A middle management level professional having an experience of 13 years (6 years of Gulf experience) in the avenue of QA/QC in Industrial Construction

MWD Engineer

Control system designer / instrumentation

Civil / Structural Designer, PDMS, AutoCAD,

Training and trade testing of apprentices

I'm A Civil Engineer graduate with 14 years experience in the Gulf country seeking for new job.

Fire/Safety Advisor, 32 1/2 years petroleum experience

Quantitative Interpretation for Reservoir Characterization

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 [ 115 ] 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out