Resume - Mechanical engineer, qa qc engineer, construction engineer

Misco Jobs

Resume #86920

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
- Manufacturing Process, Metallurgy development, Production, Quality Control and Assurance on the job training in Mitsubishi Metal Corporation, Okegawa Plant, Saitama Shi, Japan (Japan,October 2000)
-Welding Inspector CSWIP 3.1 By TWI
-BGAS CSWIP 3/2 Painting Inspector By TWI
-Welding Inspector from Department of Industry Agency for Industrial Research & Development Institute for Research & Development of Material & Technical Product Bandung (Bandung, 1999)
-Painting Application and Corrosion Prevention by Jotun
-ASNT TC IA level II for Dye Penetrant Inspection
-ASNT TC IA level II for Magnetic Particle Inspection
-ASNT TC IA level II for Radiographic Examination
-Internal Auditor Course ISO-9000 by Bureau Veritas
-Training Project Management (International Certification) – Learnit
-Implementation of Reliability Centered Maintenance (RCM) & Risk Based Inspection (RBI) in Plant Facilities by PT. Handal Wira Mandiri
-Hazard Hazard Identification and Risk Assessment training conducted by PT. Mitra Archipelago Investment with Marine & Offshore Group
-Supply Chain Management based on Just In Time conducted by PT. IDS
-Risk management in business and insurance Perspective-seminar
------------

OBJECTIVE:
------------
Mechanical Engineer/QA QC Engineer/Construction Engineer
------------

WORK EXPERIENCE:
------------
May 2006 - present
PT.Amerada Hess – Onshore Construction and Mechanical Engineer
Phase I for Onshore processing Facility – Completed project
Phase II for Oil Treatment Facility and LPGF Plant – Completed project
Scope of Work:
* Develop and maintain Procedure for Pre-Fabrication, erection, installation, Inspection and pre commissioning of static and rotating equipments
* Perform inspection at site for the equipments comply to Company Specification and Code
* Provide Technical Support to Company Package's Manager and assists him with project planning and scheduling.
* Review the technical aspects of the construction/erection procedures and methods to assure that they comply with and satisfy the requirements of codes, standards, specification and drawings and assists with interpretation of those documents as required by Company
* Responsible for ensuring all construction work is subject to Job Safety Analysis /Safety regulations
* Responsible for Review Fabrication Engineering Documents
* Responsible for review Heavy Lifting Activities at site
* Handling the installation, pre commissioning, commissioning for package system, such as compressor package, TEG package, turbine package, produce water package, utility package, Turbo expander package
* Serves the Liaison between the site and Home office Engineering department
* Assist Company 's Package Manager with progress reporting, trend analysis and recovery planning
* Assist pre Commissioning Manager to accomplish project and ready to start up
November 2004 – May 2006
PT. CHEVRON - UNOCAL INDONESIA Co. – PIPELINE INSPECTION
ENGINEER CONSULTANS For Pipeline Integrity Management Systems
(PIMS) with 138 Pipelines total Lengths 537 Km)
Scope of Work:
* Develop and Maintain inspection and maintenance routines for onshore topside and sub sea elements of the pipelines
* Perform the inspection for cathodic protection systems for pipeline system
* Review day to day Inspection reports from contractor
* Assess reported defects (anomalies) and other condition information
* Monitor approved sub sea maintenance activities
* Maintain survey and inspection records of all the Inspection activities into database
* Maintain the historical record of defects and develop the anomaly database
* Prepare and provide recommendation relating the integrity, routine maintenance, intelligent pigging activity
* Coordinate within the southern and northern field to prepare the implementation of PIMS
* Supervise the intelligent pigging activity at site

PT TOTAL E & P INDONESIE –PROJECT SUPPORT SERVICES
(STRUCTURAL, PIPELINE, PIPING ENGINEER) FOR "PECIKO 4/EPSC 2"
Project: Hook-up modification MWP-A, MWP-B,MWP-C (pipeline, piping, instrumentation and structural works within SIMOPS methods for offshore project)
Scope of Work:
* Provide Support and assistance to Construction team for preparation and review of document, procedures, and approved drawing review the vendor documentation
Material verification
* Generate responses to contractor design queries
* Ensure and asses all the above complies with company specification, design codes and is fit for purpose
* Ensure The contractor maintains schedule for deliverables
* Ensure good internal discipline communication
* Maintain and developed awareness and responsibilities under Health and Safety Regulation
July 2003- Oct 2004
PT TOTAL E & P INDONESIE – PROJECT SUPPORT SERVICES (NDE)
FOR "PECIKO 4/EPSC 2"
Project: Pre-Fabrication, Erection jacket and platform SWP K, SWP E and modification piping platform (super duplex stainless steel, carbon steel, and Stainless Steel material)
Pre-Fabrication, Erection platform SWP-G, MWP-A, MWP-B and MWP-C project
(Onshore project)

Feb 2003-May 2003
CONOCOPHILLIPS-PROJECT SUPPORT SERVICES for "BBFE PROJECT
NATUNA SEA"
Project: Hook up Modification and Expansion Facilities Project for piping, mechanical, instrumentation & electrical installation for " Belida Lift Gas
Platform Expansion Project" (SIMOPS method offshore project)
Scope of Work:
* Provide Support and assistance to Construction team for preparation and review of document, procedures, and approved drawing
* Review the vendor documentation
* Material verification
* Generate responses to contractor design queries
* Ensure and asses all the above complies with company specification, design codes and is fit for purpose
* Ensure the contractor maintains schedule for deliverables
* Ensure good internal discipline communication
* Maintain and developed awareness and responsibilities under Health and Safety Regulation
March 2001-Feb 2003
PT. ISTANA KARANG LAUT, JAKARTA, INDONESIA
Mechanical and structural Engineer/ QA- QC Engineer/ Client
Representative and Expeditor
Project: fabrication, tie ins, hook up, and installation works for vessel, piping, skid system, package system and metering unit.
Scope of Work:
* Review Vendor drawings and documentation
* Recommend new techniques and Methods of working for greater efficiency
* Implement company policies and procedures
* Recommend improvements to Company Operating Procedures
* Liaise as necessary on Technical Matters with other engineering disciplines
* Provide support and assistance to construction team for preparation and review of document, Procedures, and Approved Drawing
* Perform Inspection activities as per company specification, code, and regulations government
* Generate responses to contractor design queries
* Ensure and Asses all the above complies with Company Specification, design codes and is fit for purpose
* Ensure The contractor maintains schedule for deliverables
* Ensure good internal discipline communication
* Maintain and developed awareness and responsibilities under Health and Safety Regulation

Project: Block "B" Facilities Expansion Project (BBFE) " BELIDA PLATFORM" for CONOCOPHILLIPS Indonesia
Fabrication for Refrigerant Package (300 Tons), Compressor Module (Roll Royce) package, and Piping Spools.

Project: Senoko Project For Singapore Natural Gas Resources Project Fabrication of Stainless Steel (diameter 30") piping spools (Power Piping pipe Class).

Project: Chemical Injection Package for Conoco Belanak FPSO Project
Fabrication of Structural Skid, piping spool and Installation Metering equipment.

Project: Block "B" Facilities Expansion Project (BBFE) "HANG TUAH PLATFORM" for CONOCOPHILLIPS Indonesia Fabrication for Refrigerant Package (300 Tons), and Piping Spools.

Project: PT. Jay Ray MC-Dermott Indonesia for BP West Java Project Fabrication and Installation for Utility/Instrument Gas Package including Instrument Gas Coalescer, Instrument Gas Dryer, and Production Separator Packages.

Project: Gulf Resources CO. LTD Project for Suban (Grissik) Fabrication for Suban Gas Fiscal Metering System (structural, piping and vessel work).

Project: Kufpec Indonesia LTD. For Seram Joint Operation (OSEIL Production Facility Phase I)
Fabrication for Vessels, Piping Spools, Skid Packages, pumps, Tanks, Boiler, Heat Exchangers, and Flares equipment for Phase I OSEIL Production Facility

Project: Total Tunu Phase 8 – EPSC 2 Project
Fabrication of Vessel (LP Flare KO Drum, FKP Open Drain Drum, And HP Flare KO Drum) and Piping Spool for Offshore Piling

Project: Three Phase Test Separator for State Oil Marketing Organization
(SOMO), Ministry Oil (Baghdad, Iraq for North Oil Company, Kirkuk Iraq)
Project
Fabrication for Skid Packages (skid, vessel and piping – 10 units)

Project: PT. Jay-Ray Mc Dermott for Unocal Thailand Project
Fabrication of B tex Recovery skid & Glycol Contactor for "UNOCAL THAILAND"

Project: UNOCAL INDONESIA- Di ethanol Amine CO2 Gas Removal System
Project
Fabrication for Heat Exchanger and vessel (still stripping Column, Amine Flash Tank, Outlet Gas Scrubber, Amine Contactor, Lean/Rich Amine Exchanger, Amine Still Re boiler, Amine Particle Filter, Amine Charcoal Filter, Inlet Gas Separator, Still Overhead Reflux accumulator, Condensate surge/ De aerator Drum), piping spool, and heaters.
1999-2001
PT. Mitsubishi Metal Fabrication, Cikarang, West Java – Indonesia
(U, U2 ASME Accredited Company, MOL, JIS Accredited Company)
Quality Control – Quality Assurance Engineer for Pressure vessel, Reactor, Heavy equipment, Prefabricated Piping used in Oil, Gas, chemical Plant, and Process Industry with major material Super alloy, Titanium, Stainless steel and Duplex Stainless Steel

1997 – 1999
PT. Truba Jurong Engineering, Paiton – Indonesia
QC/QA Inspector in Private Project Phase II Balance Of Plant (BOP) BOILER
Unit 5 & 6 (capacity 2 x 610 MW)
* Erection and construction for ' Boiler Unit 5 & 6 (capacity 2 x 610 MW) and structural work'
* Erection and construction for 'Civil, tanks and underground piping for water treatment area '
* Erection and construction for 'Balance of Plant (BOP) facilities including high pressure piping (Main steam piping, Hot reheat Piping, etc), Low pressure piping, and Fire fighting piping'
* Erection and construction for 'water treatment tank area and all mechanical installation works (pumps, condenser, pressure vessel and heat exchanger)

1995-1997
PT. Mekar Armada Jaya, Magelang – Indonesia
Staff Design and Construction of Product and Development

EDUCATION & CERTIFICATION:
------------
Bachelor degree majoring in Marine Engineering ITS
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6901 to 6950 of 15512)

Go to Search Parameters...

Brief Description

3 years field experience in oil and gas. Degree in Petroleum Engineering. Hard worker, quick learner and very ambitious.

experience in consulting to the Petrochemical and alternative fuel industries . Degree in Chemical Engineering /Process Engineer

Electrician

PLC,SCADA

AutoCAD, ProE,

Materials expertise, inventory,issue and received handler

Iam Diploma Holder in Mechanical Engineering and having 9 yrs of oil and gas experience.Maintenance and construction experience.Both as a technician ans staff level coordinated activity

Sales chemical engineer

Bs in Petroleum engineering , field engineer

Reliability engineer, plant engineer, manufacturing engineer, expert in kiln and ball mills, hydraulics pneumatics

DRILLING ENGINEER, EXPERIENCE - 4 YEARS IN OIL FIELD AS DRILLING ENGINEER

Free! A motivated self starter and team player/builder with 30+ years of Canadian and International upstream oil industry experience. Skilled project manager and problem solver. High level of computer literacy.

I having more than 9 years of experience as a Piping Designer PDS in the field of Oil and Gas (Offshore /Onshore), LNG, Refinery and Petrochemical Industries

Mechanical Engineer - Maintenance / Planning / Project - 13 years of experienc.

Geological and Geotechnical Core Logging for Exploration drill core and Mining. Have experience Training and Supervising technical staff in this field.

Creative, tenacious, analytical, result-oriented professional with proven success in streamlining procedures, managing projects, analyzing products or processes, and increasing department efficiency through effective business strategy. Seeking admission to be as world class Quantity Surveyor

Geologist/geophysist (seismic processor) was working in WesternGeco (Schlumberger) for 16 months.

Seeking for challenging and rewarding opportunities in a dynamic and reputable organization where mutual interests and achievements will be maximized.

I have completed Mtech in applied geology,i can do mining plan in iron ore,core logging,quality control of ore,

I have HND in Building Technology. I also have good knowledge of AutoCAD. I had been involved in construction work at different capacities.

I have and engineering management degree and currently in an MBA program , and will be through this quarter. Very proficent in MS project tool, MS office tool, minitab

A high skilled Well Test Engineer.

Architecture CAD Drafter

I hold a Bachelor of Science degree in Sociology, my core competencies are Administrative and Human Capital Development, Relationship Marketing, Business Analysis and Development.

I would like to apply H2S Technician or others position suitable at your company. I had been 10 years experience in geothermal industry since 1994 trough 200

I'm a qualified red seal mechanic, done courses on drill riggs and are a qualified blaster and magazine master. I've done the Make Safe and Health Course. I was Site Manager for a Drill Company, blaster and drill rigg machanic for the past 6 years.

Piping design engineer

I have 10 years experience in the oild industry. 5 years as driller and 6 months as Relief Tool Pusher. I amready to go to work as soon as possible. I have my current Well Control and Passport. I have H2S training, Fall Protection, & First Aid

Petroleum Lab Tech

Title Research; Sovereignty to present

I am Petroleum Geophysics MSc Student at Imperial College London.I have a background in Physics and skills in the use of RocDok,SMT,Claritas Globe,Matlab and Petrel softwares.I also have good and effective communication skills,excellent report writing and presentation skills.I am a good team player.

Experienced project manager in landscape sectors, 25 years practical management experience in commercial and residential fields including high-end, M.Sc. and B.Sc. horticulture, M.B.A. pending

pi[ping eng 3+ experience

Currently seeking a “Drilling Operations” position , internationally within the upstream petroleum industry

Peoplesoft Technical Consultant

Quantity Surveyor

Land Surveyor

Mineral processing engineer, metallurgist, flotation, copper, sulfide ore, molybdenite, milling, flotation test

I have been working in the mining industry for over thirteen years. For the last 5 uyears I have been working as a Jumbo Operator. I also have extensive expereince in Tele Remoting, Bogging and all aspects of develpmental mining.

Have 10 years experience in Majour Industrial Steel Processing Plant in Saldanha, South Africa doing Hydraulic maintenance. Have been doing all buying and selling and sourcing of goods over internet. Also went to site to do job estimations and Representative work. Did Offshore Survival course

Petroleum Engineer (B.Tech- PE) with 4 yr of Exp : Exp in Reservoir Modeling, Production Modeling, Integrated Asset Modeling, Gas Lift Optimization, Workover, MBA, DCA, Stimulation and Reservoir Studies

Highly self motivated and goal-oriented professional committed to pursuing a long term career in petrochemical / chemical industries. Has 11-year experience on maintenance, repair and routine calibration, with strong analytical and problem solving skills, on analyzers.

A self-motivated and task-oriented Chemical Engineer with 10 years experience and proven track record working in the manufacturing environment of an MNC.

Diploma in Civil Engineering,Civil QA/QC inspector

Seismic Data Processing QC, Supervision and Management experience. International experience in Northa nd South America and Europe. Experience with artic data, high-resolution surveys heavy oil suveys, shallow water, TZ, and complex over-thrust data.

Mechanical engineer, qa qc engineer, construction engineer

Mechanical Supervisor in construction & maintenance of mineral processing plants. From primary crushing thru to gold room or concentrate loading,have extensive experience with installation of SAG & Ball mills, ex-pat in Ghana, Tanz,Thailand, and all of Australia

E/I SUPERVISION for construction , commissioning of Oil & Gas processes

„« Reservoir Engineering, fluid property analysis, pressure transient analysis, reservoir characterization, reservoir management, and good knowledge of production optimization (managing wells), and understanding of surface facility issues.

+15 years experience pulling ,running and comissioning ESP completions world wide. Run life development etc

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 [ 139 ] 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Goto Advanced Search...
Keywords: (e.g. mining engineer)		Find results with:

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out